Is it possible to have the result from webservices with oracle8i

hi,
i call webservices MS .net with package utl_http under oracle 8i.
exemple:
DECLARE
x utl_http.html_pieces;
msg varchar2(12);
BEGIN
x := utl_http.request_pieces('http://localhost/ServiceNotification/Notification.asmx/NotifT?messagetmp=' || msg);
END;
I don't know how to have a result from a webservices!
thanks for helping me.

While the following paper is Oracle9i DB specific, conceptually, what is done should work with Oracle8i.
Bear in mind that the use of XMLType is specific to Oracle9i DB R2 so if you were to follow the example, you would have to use varchars and probably acept the result into the PL/SQL XML Parser. See:
http://otn.oracle.com/tech/webservices/htdocs/samples/dbwebservice/DBWebServices.html
Mike.

Similar Messages

  • Is it possible to put the results from a query in a variable to use in the bean class?

    Hello, I'm using JDeveloper 12.1.2.0.0
    I would like to keep the result of my queries (the method i created in the AppModule) in a RichTable or other type of variable so i can have the results stored and i don't have to do unnecessary queries after. I don't think the query is the problem but keeping the results.
    I've tried to do that by using this:
        public String testVFactSales(String conditions) {
            PreparedStatement query = getDBTransaction().createPreparedStatement("" + "select * from v_fact_sales " + conditions, 0);
            //ResultSet rs;
            ResultSet result;
            //RichTable result;
            //String result = null;
            try {
                //query.setString(1, conditions);
                // query.execute();
                query.execute();
                result = query.getGeneratedKeys();
                query.close();
                System.out.println("Result: " + result.toString());
                return result.toString();
            } catch (SQLException e) {
                e.printStackTrace();
            return "";
    As you can see, i've already tried some solutions but so far i only get errors (cannot convert or null exception, when i try to put the result in a richtable in my bean class)
    Any ideas?
    This is very important for me, since it would improve the performance of my project a lot.
    Regards,
    Frederico.

    Hey Arunkumar,
    I came to this conclusion since i'm using binding variables with my where clauses.
    I've measured the time and i get really bad time responses.
    This is my main table query, where all the others selections will be filter the search in this table:
    SELECT VFactSalesNew.N_SALES,                              
           VFactSalesNew.QUANTITY,                              
           VFactSalesNew.PRICE,                               ,                              
           VFactSalesNew.FK_STORE,                              
           VFactSalesNew.ID_ANO,                              
           VFactSalesNew.QUARTER   
    FROM V_FACT_SALES_NEW VFactSalesNew                              
    WHERE                                          
    ((nvl(:var_dimCoin,'0') ='0' OR FK_COIN IN (select * from THE(select cast( in_list(:var_dimCoin) as mytableType ) from dual ) a) )                                                   
    AND                                                 
    (nvl(:var_dimProduct,'0') ='0' OR FK_PRODUCT IN (select * from THE(select cast( in_list(:var_dimProduct) as mytableType ) from dual ) a) )                                                  
    AND                                                 
    (nvl(:var_dimCustomer,'0') ='0' OR FK_CUSTOMER IN (select * from THE(select cast( in_list(:var_dimCustomer) as mytableType ) from dual ) a) )                                                 
    AND                                                 
    (nvl(:var_dimStore,'0') ='0' OR FK_STORE IN (select * from THE(select cast( in_list(:var_dimStore) as mytableType ) from dual ) a) )                                                
    AND                                                 
    (nvl(:var_dimSeller,'0') ='0' OR FK_SELLER IN (select * from THE(select cast( in_list(:var_dimSeller) as mytableType ) from dual ) a) )                                                  
    AND                                                 
    (nvl(:var_dimProject,'0') ='0' OR FK_PROJECT IN (select * from THE(select cast( in_list(:var_dimProject) as mytableType ) from dual ) a) )                                                  
    AND                                                 
    (nvl(:var_ano, '0') ='0' OR ID_ANO IN (select * from THE(select cast( in_list(:var_ano) as mytableType ) from dual ) a) )                                                  
    AND                                                 
    (nvl(:var_treemap,'0') ='0' OR PK_REGION IN (select * from THE(select cast( in_list(:var_treemap) as mytableType ) from dual ) a) )                                                  

  • I used to be able to search a subject and have the "results" show up with a new tab, but now it opens the result in the same tab, how do I fix this?

    I have tried repeatedly to get the options section to show how to do this but everything changed with the "new-and-improved(?)" Mozilla!
    Could someone please explain to me how to get this to work like it used to (open search results or links in a new tab)??? PLEASE, it is driving me nuts since my slow @ssed computer and AT&T (should be AS&S without the &) internet, makes me remember the bad old days of the 286 computer load times:
    Down memory lane...
    Power button on ==> go take a Shower, Shave, and the other S ==> Make coffee ==> enable program in command line (pre-windows) ==> fix breakfast and another coffee cup ==> curse at computer because it made you forget to add another switch to your command line...
    How many remember those days?!
    They say laughter is the best medicine, except I'm not laughing about the new Mozilla anymore :(

    Could you clarify where you are doing your search?
    ''For Firefox's "Search bar",'' which is the box on the right end of the main navigation toolbar with the icon indicating your currently selected search engine, there is a hidden setting for this:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''sear''' and pause while the list is filtered
    (3) Double-click the '''browser.search.openintab''' preference to switch it from false to true.
    If you test, does it work?
    ''For searches from other places,'' could you be more specific about where you are entering your query (e.g., address bar, built-in home page, on a search engine site)?

  • I lost an album off my iTunes list, but I have the email from Apple with the receipt of the purchase. Can I get the album again for free?

    I have a new macBook, so backed up my iPad first time in two years. Lost a James Taylor album I purchased in July 2010. I still have the reciept email form Apple thanking me for buying it on iTunes. Its not showin in my purchased folder. Can I download it for free somehow?
    Thanks.

    If you live in one of the countries where itunes in the Cloud is availanble for music redownloads. See the list here:  http://support.apple.com/kb/HT5085
    Here are the instructions: 
    Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519

  • I would like to build a drag n drop interface and have the results sent to my email in PDF format. Is this possible?

    I would like to build a drag n drop interface and have the results sent to my email in PDF format. Is this possible?

    Captivate is not really designed to do what you want in this instance.  It's more targeted at allowing a user to complete an assessment and then track whether or not they passed.  So it's only really set up to send information in a format that the LMS will understand and interpret as Pass/Faill and what the score was.
    You really need something more flexible than that. So I think you would need to get a programmer involved and have the solution custom made.  In my experience, any time you try to diverge Captivate from what it was designed to do, and you need to get other IT professionals involved, you can kiss thousands of dollars goodbye before you have a workable solution.

  • I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

    I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

    The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
    The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
    Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
    WDS network
    If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
    The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
    At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

  • HT204053 the only way to creat an icloud account is with a ipad, iphone or imac. is it possible to creat the account from my windos PC? i already downladed i cloud, and i have an Apple ID but Not an Icloud account/

    the only way to creat an icloud account is with a ipad, iphone or imac. is it possible to creat the account from my windos PC? i already downladed i cloud, and i have an Apple ID but Not an Icloud account/

    Isa Garduño wrote:
    the only way to creat an icloud account is with a ipad, iphone or imac Apple computer.
    As you already knew, no, you cannot create a new iCloud account from anything but the above devices.
    http://support.apple.com/kb/HT4436

  • Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi...
    The issue is that your credit or debit card credentials must be associated with the same country where you reside to make purchases.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    Billing policy is the same for both the iTunes as well as Mac App Stores.

  • Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    No.
    OT

  • Imput - Is it possible to have the same live edit result

    Is it possible to have the same live edit result with a xml
    fiel on client side than :
    http://www.peoplesdns.com/ajax/?edit=2
    Thank for your reply.

    No.
    OT

  • HT4946 by mistake my contacts are deleted from iphone and the pc which itunes installed is corrupted, i have the itunes backup folder,is this possible to restore the contacts from my old itunes backup folder to iphone!?

    by mistake my contacts are deleted from iphone and the pc which itunes installed is corrupted, i have the itunes backup folder,is this possible to restore the contacts from my old itunes backup folder to iphone!?

    unless you had them synced with icloud or some other email account, very unlikely

  • Is it possible to have the Find My iPhone function on a PC.  I have this app running well on all my OS devices.  Just wondering if I can locate my OS devices from an "app" on my PC.

    Is it possible to have the Find My iPhone function on a PC.  I have this app running well on all my OS devices.  Just wondering if I can locate my OS devices from an "app" on my PC.

    I do not believe there's an app for that on PC. I do recommend getting the iCloud dashboard for PC and to try it there. I would myself if my PC was working.
    PC ***** get a Mac.
    You can always go to iCloud.com to find your phone.

  • Is it possible to name the results table.

    Hi, I'm new to java and have hit a brick wall devloping a GUI which access a SAPDB database.
    They layout of the GUI is:
    have a awt lists in card layout, which is populated with the results of a SQL query to table REGION.
    However the number of results returned can be greater then 1Mill. To minimise the mem useage, i'm using the ResultSet absolute(), first() etc methods to collect and display small chunks of the data, for the different card in the gui. This works fine :)
    However, the user is able to select an item from the list to perform a new query, which the results a presented in a dialog box, not dependent on the parent frame. Works :)
    But, when the user (I) try to move anothe card in the parent frame I get this error:
    SAP DBTech JDBC: Object is closed
    com.sap.dbtech.jdbc.exceptions.ObjectIsClosedException: SAP DBTech JDBC: Object is closed
    at com.sap.dbtech.jdbc.ConnectionItem.assertOpen(ConnectionItem.java:54)
    at com.sap.dbtech.jdbc.ResultSetSapDB.beforeFirst(ResultSetSapDB.java:177)
    at blastDb.Table.getResultSetSize(Table.java:205)
    at blastDb.Table.setCursor(Table.java:227)
    at ViewDatabase$RegionPanel.setRegionList(ViewDatabase.java:354)
    at ViewDatabase$TabPanel.showRegionList(ViewDatabase.java:180)
    at ViewDatabase$TabButtonListener.actionPerformed(ViewDatabase.java:289)
    at java.awt.Button.processActionEvent(Button.java:381)
    at java.awt.Button.processEvent(Button.java:350)
    at java.awt.Component.dispatchEventImpl(Component.java:3526)
    at java.awt.Component.dispatchEvent(Component.java:3367)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:445)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:191)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:144)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:130)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
    After some reading I have come up with this hypothesis:
    In the parent frame there is the object (class) RegionTable, which contains the ResultSet (rsR) of the sql query generated by it.
    In the dialog box there is the object (class) ProteinTable which also contains the ResultsSet (rsP) of the sql query generated by it.
    So when RegionTable querys the database the rsR points to the results table in the SAPDB. All good.
    However when ProteinTable querys the database, rsR closes and rsP is valid ie. points to the results table in the SAPDB.
    Thus after the second query RegionTable.rsR is unable to collect the results of its query. BAD :(
    From what i have read, if the results table is named for the first query, the second call which results table is named something diff then rsR will not close, as the results table is not destroyed, thus rsR can read it's results after the second qury.
    This problems occours when the objects share the same connection or diff connections.
    As far as I'm aware i'm using JDBC 1.2 drivers and SAPDB latest build.
    I know i could hold the results in a view, but that requies more coding, being able to name the results table in the SAPDB make it alot easier.
    So my question is:
    1. Are my assumptions correct??
    2. is there a SQL statement to name the results table for a given query?
    From SAPDB:
    A result table name identifies a result table (see table).
    Syntax
    <result_table_name> ::= <identifier>
    And I've got no idea what is beging impiled beyond that it is possible to name a results table. Obtained from :
    http://www.sapdb.org/htmhelp/da/ed9036dfe4b903e10000009b38f889/frameset.htm
    If anyone can help, that would be fantastic!!!
    Cheers
    fauxn

    I've check the code, when the dialog box is opened a new connection is made, and i still get the same error:
    SAP DBTech JDBC: Object is closed
    com.sap.dbtech.jdbc.exceptions.ObjectIsClosedException: SAP DBTech
    JDBC: Object is closed
    at com.sap.dbtech.jdbc.ConnectionItem.assertOpen(Connection
    Item.java:54)
    at com.sap.dbtech.jdbc.ResultSetSapDB.beforeFirst(ResultSet
    SapDB.java:177)
    at blastDb.Table.getResultSetSize(Table.java:205)
    at blastDb.Table.setCursor(Table.java:227)
    at ViewDatabase$RegionPanel.setRegionList(ViewDatabase.java
    :354)
    at ViewDatabase$TabPanel.showRegionList(ViewDatabase.java:1
    80)
    at ViewDatabase$TabButtonListener.actionPerformed(ViewDatab
    ase.java:289)
    at java.awt.Button.processActionEvent(Button.java:381)
    at java.awt.Button.processEvent(Button.java:350)
    at java.awt.Component.dispatchEventImpl(Component.java:3526
    at java.awt.Component.dispatchEvent(Component.java:3367)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:445)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Ev
    entDispatchThread.java:191)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Even
    tDispatchThread.java:144)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThr
    ead.java:138)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThr
    ead.java:130)
    at java.awt.EventDispatchThread.run(EventDispatchThread.jav
    a:98)
    when i ask rsR to collect the results from it's query.
    Dosen't make sence, unless its they way I'm implementint the GUI???
    I'll look into the JDBC driver bug.
    Cheers

  • Hide column but still have the results displayed

    I am working in BEx query designer 2004s.  Is it possible to hide a column but still have the results displayed?  If I go to the properties of the column and check 'always hide' it hides the column but the results do not display either.
    Any help would be greatly appreciated.

    In the query designer, you select Hide option for the returns key figure from the context menu. Now your report will not show the returns key figure.
    But have the total returns key figure in the query and you will get to see the total returns as well.
    Hope it helps.
    regards.

  • Data Migration from 11i to R12 Global - Open POs,lines, receipts & on hand upload, Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines?

    Hi Friends,
    We are in a phase of data migration from 11i to R12 
    I was discussed with client & they wants extraction of all open POs which was generated after 01 Jan 2014 to till date in 11i.
    Condition for open POs is PO qty-received qty=>0
    critical Example for open PO is :PO no: 10 has 4 lines, 3lines full qty has been received & for 1 line partial qty(say 50 out of 100) received.
    in this case he wants in R12 uploading as PO no:10 should entered as open PO with all 4lines & 3 lines complete receipt should be done, for 4th line partial qty i.e 50 should be received.
    the question is if we upload on hand qty first, then open POs & receipts, it will increase the onhand qty in new system(mismatch of on hand qty's 11i to R12) 
    Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines.
    Or Please advice best solution.
    Thanks & Regards
    Giri

    adetoye50 wrote:
    Dear Contacts Journal Support Team,
    FYI, this is a user to user support forum.  You are NOT addressing Apple here.
    Honestly, I doubt anyone is really going to take the time to read the novel you have written.

Maybe you are looking for