Is it possible to login via python script ?

Hi,Experts !
I want to grab some web pages with python script. and those pages need SSO when open in firefox.
Totally have no idea how to start the job.Could you give me some advices/tips.
Tons of thanks.

Please check
Using Kerberos Authentication on SAP NetWeaver AS Java - User Authentication and Single Sign-On - SAP Library (NW7.3)
Using Kerberos Authentication for Single Sign-On - User Authentication and Single Sign-On - SAP Library (NW7.0)

Similar Messages

Unable to login via Internet Script Editor

I have a user that is unable to open / login Internet Script Editor on any computer using her username and password. The error message is "The user credentials you supplied were not accepted by the server. Please contact the Web server's administrator to verify you have permission to log on."
We can login and open with other users that have the same access permissions. We have also tried configuring the Internet Script Editor to access the other AW but the message is the same.
Any ideas?
Thanks
Victor

I just remember that there used to be a problem once with a certain version of Putty 0.61 defaulting to GSSAPI... Perhaps that is the problem. Please see here: OEL 5.5 - access denied .... but not!
Otherwise, try to login using ssh -vvv username@hostname and see there it stops. Have you previously configured or modifed /etc/ssh/sshd_config?
Debugging the connection in Putty is very inconvenient. You can download a free copy of MobaXterm (home edition) to enter ssh -vvv.... from MobaXterm free Xserver and tabbed SSH client for Windows

How to call a python script from a TestStand sequence?

Please tell me how is it possible to call a python script from a TestStand sequence.
Thank for your help in advance.
Imre

Here you can find some information about Python and LabVIEW:
http://forums.ni.com/ni/board/message?board.id=170&message.id=124424&query.id=149647#M124424
If you have LabVIEW, you could use LabVIEW steps to call your Phyton Scipts.
Another solution would be, to do, what is decriibed in the thread directly in TestStand:
You can call a dll or .NET assemblies directly from teststand, or use the "Call Executable" TestStep.

Python Script to add internal hosts on ACS 5.2

Hi,
is there any example how to add/remove a internal host via python script, like you would do it via the GUI under "User and Identity Stores -> Internal Identity Stores -> Hosts" ?
regards
Dirk

Hi Dirk,
where do you plan to run your script ? on a server external to the ACS I guess right ?
Then the question is more "is there a way to add a user through CLI on ACS" because that is what the script would be using right ? And there isn't such a way to my knowledge.
Nicolas
===
don't forget to rate answers that you find useful

Anyone running ArcGIS arcpy Python scripts using Oracle 11g EM AGENT?

I have a Windows command file that successfully executes an ArcGIS arcpy Python script when run manually or via Task Scheduler . But when executed by the EM Agent, arcpy doesn't recognize the SDE connection string file as a workspace for connecting to the geodatabase. The manual execution on the server uses the same login as the EM Agent.
I have verified all the environment variables for the EM Agent are the same as those for running natively on the server. I then used arcpy to describe the file type using both execution methods.
DescribeFile.py
import os
import sys
import arcpy
desc arcpy.Describe("D:\\Test\\Compress\\database_login.sde")
print desc.dataElementType
Manual output of: python.exe DescribeFile.py >> DEWorkspace
EM Agent output of: python.exe DescribeFile.py >> DEFile
I have little experience with Python, but years of experience with the EM Agent. I have been unable to find anything related that was helpful on Oracle Support, ESRI support, or general internet searches.

I am a non arcpy user but should it not be desc =
Or is it a typo?
And maybe try using / instead of \\
Eric

Run a python script from ae

I keep getting no as an answer unfortunately but I'm asking here. I'm not talking about omino's graphics plugin, I need to use this in more of a scripting scope. As far as I've seen, his plugin does graphics related stuff.

Run a Python script in what fashion? Just looking to launch it from within AE? You could use the execute() method for a File object to just launch it with it's default app. You might also launch via command line with the system.callSystem() method. If you're on MAC, you might even be able to intigrate it into an AppleScript to launch it as well. As far as launching/using Python directly within AE, this hasn't been possible since "Useful Things" went away.

How can I use automator to open terminal change directory run a python script?

Hi all,
I dont really ever use automator - which may be my big problem - and I am trying to make an apllication that seems fairly simple in theroy. I want something that will lunch terminal, cd to the place where my python script lives and then run it. I have tried a number of suggested ways and can get the terminal to open and the directory to change but cant figure out how to run the script. This is my workflow if i did it manually each time
- open terminal
- type cd "the place where my file lives"
- type python uploadr.py -d
I can get terminal to open then cd to the right place but cant get the "python uploadr.py -d" to run without an error.
any help would be very appricated
thanks!!!
J

this is the script I got closest with - I know its something to do with breaking those two commands up but i just dont know how to do it
on run {input, parameters}
          tell application "Terminal"
activate
                    if (the (count of the window) = 0) or ¬
                              (the busy of window 1 = true) then
                              tell application "System Events"
keystroke "n" using command down
                              end tell
                    end if
                    do script "cd /Users/behole/Desktop/FlickrUpload/" & "python uploadr.py -d" in window 1
          end tell
          return input
end run
this is the error I get in terminal after I run it
Last login: Mon Jul 23 15:37:17 on ttys000
be-holes-MacBook-Pro:~ behole$ cd /Users/behole/Desktop/FlickrUpload/python uploadr.py -d
-bash: cd: /Users/behole/Desktop/FlickrUpload/python: No such file or directory
be-holes-MacBook-Pro:~ behole$

Ways to run a shell script that starts a python script

I have a shell script that is used to launch a python (2.5.1 installed via Fink) script (IDLE). The shell script, the IDLE script, and the python binary are all in /sw/bin as usual. This all has to be done AFTER X11 has been launched. I have to make this easy for my students to use.
In each account's home .xinitrc file, I have the lines
source .profile
vpython2.5 *
and this works, but it calls the vpython2.5 script every time X11 is launched. I've tried adding the vpython2.5 command to the X11 Applications menu, but this works ONLY if I add /sw/bin to the script name. Apparently the menu doesn't "know" about the current PATH setting. The keyboard shortcut I put in the menu neither shows up nor works either. So much for that option.
Now I've discovered Platypus and it looked promising, but I'm obiously not using it correctly and from the documentation, I can't figure out what I'm doing wrong.
So here's the ultimate question. Is there a way to use Platypus to encapsulate the vpython2.5 script, preferably also starting up X11, so students will only have to click on the new app's icon? This is how OpenOffice.org starts up. It seemed simple enough to do in Platypus, but I never saw the IDLE window open up.

I added a shortcut key "j" for the "xman" app in X11, and it seems to work fine. Did you press the command key with the shortcut key? Are you sure the shortcut key you selected does not overlap with others in the menubar?
There should be no problems creating an application with Platypus using a shell script. In my experience, you have to source all necessary files, assuming that the shell script does not recognize your terminal settings. You can also launch X11.app in the shell script with the following command:
command open -a X11
It is a good idea to pause the shell script until X11 finishes launching. To do this, you need a command like,
command sleep 5
Otherwise, if you try to start X11-dependent apps in the shell script while X11 is launching, it will fail. There may be better ways to do this.
Hope this helps.

Weird problem using "Login" in MaxL script

Hi there
I have created a MaxL script for loading som data into an Essbase. The script you can see below.
login 'user' 'password' on 'nkm18k14';
import database 'realtest'.'Loadtest'
data from text data_file '\\nkm18k00\Planning\Loaddata\lonbud.txt'
using server rules_file 'LonBLoad'
on error write to '\\nkm18k00\Planning\Errorlogs\realtest.txt';
When I try to execute it, as it is i get the following error "(3) Syntax error near ['$'], which im guessin is line 3, right?
When I remove line 1 (the login statement), the script runs just fine. What is goin on, any ideas?
I as a user have write acces to the network locations specified, could it be that the essbase uses som kind of system user that doesn't have acces to the network location?
Any valuable input will be appreciated.
Regards, Jacob

It's true that they are not "needed" from a security approach, but from a maintenance approach you still end up having to touch a large number of scripts if you store the connection details in them.
As a system user, you don't even have to change the password -- but if you have someone leave the company you may just want to.
Either way, I would never want to hard code connectivity details inside dozens of scripts when I can keep it in a single place.
Here is the MXL_Shell file for Windows -- you can obtain the SendEmail.exe from multiple places, but the syntax should be validated.
The location of the scripts, log files, and batch items can of course be modified to your liking as well...
The Errors that are ignored are stored in a file called "IGNORED.TXT" in the Batch directory (see below for what I ignore).
@echo off
REM ================================================================
REM   MXL_Shell.cmd - Wrapper to call EssMsh (MXL) scripts
REM ----------------------------------------------------------------
REM   Author: Doug Bliss
REM   Initial QC: 5/21/2005
REM ----------------------------------------------------------------
REM   Script to Execute should be base name (without extension)
REM   Script should exist in the ..\Scripts directory
REM   Both StdOut and StdErr are redirected to ..\Logs\<Script>.log
REM   Call activity is logged to ..\Logs\Daily_ddmmyy.log
REM   Log file is appended to ..\Logs\<Script>.hst at finish
REM   Log file is processed for "Error" tokens to determine if
REM      the result was successful or not
REM   Notifications are taken from comment blocks in the script:
REM      /* Notifications:
REM         ONSUCCESS [email protected]
REM         ONERR [email protected]
REM       */
REM   Localization details: Update the variables set immediately below (typically SRCPATH and EMAIL*)
REM ================================================================
SET SRCPATH=C:\Automation
SET EMAILDOM=<yourcompany.com>
SET EMAILRELAY=<relay>.%EMAILDOM%
SET DEVBOX=<devboxname>
SET IGNORE=%SRCPATH%\Batch\Ignored.txt
SET MXLFILE=%SRCPATH%\Scripts\%1.mxl
SET LOGPATH=%SRCPATH%\Logs
SET LOGFILE=%LOGPATH%\%1.log
SET ERRFILE=%LOGPATH%\%1.err
SET HSTFILE=%LOGPATH%\%1.hst
SET DAYFILE=%LOGPATH%\Daily_%date:~4,2%%date:~7,2%%date:~10,4%.log
REM ################################## Step 1: Sanity Checks
IF "%1"=="" EXIT /B 1
IF NOT EXIST %MXLFILE% EXIT /B 2
REM ################################## Step 2: Initialize Log entries
IF NOT EXIST %LOGPATH%\. MKDIR %LOGPATH% >nul
IF EXIST %ERRFILE% MOVE /Y %ERRFILE% %SRCPATH%\Logs\%1.bak.err >nul
IF EXIST %LOGFILE% MOVE /Y %LOGFILE% %SRCPATH%\Logs\%1.bak.log >nul
REM ################################## Step 3: Call the Script
ECHO %time% -- Calling EssMsh Script: %1.mxl %2 %3 %4 %5 %6 %7 %8 %9 >>%DAYFILE%
ECHO ============================== ESSBASE SESSION LOG >%LOGFILE%
ECHO Log Opened: %date% %time% >>%LOGFILE%
CALL User.cmd
essmsh.exe -s %COMPUTERNAME% -u %UID% -p %PWD% %MXLFILE% "%2" "%3" "%4" "%5" "%6" "%7" "%8" "%9" >>%LOGFILE% 2>&1
REM ################################## Step 4: Post Processing
REM #### Daily Log Entry (return call)
ECHO %time% -- Returned from Maxl Script: %1.mxl >>%DAYFILE%
ECHO Log Closed: %date% %time% >>%LOGFILE%
ECHO ============================== END OF SESSION >>%LOGFILE%
REM #### Process Error entries and filter via Ignored.txt file
TYPE %LOGFILE% | FIND "ERROR" >%ERRFILE%
FOR /f "tokens=1" %%a in (%IGNORE%) DO TYPE %ERRFILE% | FIND /V "%%a" >%ERRFILE%
FOR %%a in (%ERRFILE%) DO SET /a ErrCount=%%~za >nul
IF '%COMPUTERNAME%'=='%DEVBOX%' (
     SET TYPE=NON-Production
     SET SVR=development
) ELSE (
     SET TYPE=Production
     SET SVR=production
IF %ErrCount% EQU 0 (
     ERASE /Q %ERRFILE%
     SET SUBJECT=Essbase %TYPE% Script Completed
     SET MESSAGE=Maxl script '%1' has successfully completed on the %SVR% server.
     SET ATTACH=
     SET RESULT=SUCCESS
) ELSE (
     REM ################################## ERROR Processing
     SET SUBJECT=Essbase %TYPE% Script Error
     SET MESSAGE=Errors were detected in Maxl script '%1', the job's log and error files are attached.
     SET ATTACH=%LOGFILE% %ERRFILE%
     SET RESULT=ERR
TYPE %MXLFILE% | FIND "ON%RESULT%" >Notify.tmp
FOR /f "tokens=2" %%a in (Notify.tmp) DO SendEmail -f %COMPUTERNAME%@%EMAILDOM% -t %%a -u "%SUBJECT%" -m "%MESSAGE%" -s %EMAILRELAY% -a %ATTACH%
ERASE /Q Notify.tmp
ECHO. >>%DAYFILE%
ECHO. >>%HSTFILE%
TYPE %LOGFILE% >>%HSTFILE%
:FIN
ECHO.
EXIT /B %ERRCOUNT%Here is my IGNORED.TXT file (only the code itself is used, the rest is for reference).
0000000 This file contains Essbase Error codes which should be ignored by ESS_Shell.cmd or MXL_Shell.cmd
1051083 This substitution variable does not exist.
1003029 Encountered formatting error in spreadsheet file [%s]
1090010 Error in File [%s] Which is a [%s] Spreadsheet
1051068 Database is not in archive read-only mode

{"success":false,"msg":"package file parameter missing"} while trying to upload a package via python

Hello,
I try to write a command line script for administrating CQ5 via command line not using curl or wget. When I try to upload a package I get the following error message: {"success":false,"msg":"package file parameter missing"} So what parameter (sure "file") is missing or how do I have to "put it in"?
To be more precise:
When using curl, everything works fine, so I looked at the header and body curl sends and rebuilt both via python - without success. And curl does not send a "file" parameter by the way, or I didn't see it.
Best regards,
Rene

For RMA Line. I am assuming you have already created a 'RETURN' type transaction Type, and tied that to the AR transaction type. if yes, then just follow the COPY UTILITY to copy the original line into a RMA line using the Copy Utility as below. Let me know if that was helpful.
debug_message('Start Copying order..');
l_copy_rec.api_version_number := 1;
l_copy_rec.init_msg_list := 'T';
l_copy_rec.COMMIT := 'T';
l_copy_rec.Copy_Order := 'T';
l_copy_rec.hdr_count := 1;
l_copy_rec.append_to_header_id:= NULL;
l_copy_rec.hdr_info := 'T';
l_copy_rec.hdr_type := l_refund_order_type_id;
l_copy_rec.hdr_descflex := 'T'; -- changed to 'T'; Dipanjan; 03/06/2012
l_copy_rec.hdr_credit_card_details := 'F';
l_copy_rec.hdr_scredits := 'T';
l_copy_rec.hdr_attchmnts := 'T';
l_copy_rec.hdr_holds := 'F';
l_copy_rec.manual_order_number:= NULL;
l_copy_rec.all_lines := 'F';
l_copy_rec.line_count := l_line_ids.count;
l_copy_rec.line_type :=&l_refund_line_type_id; -- replace with the 'Return' type transaction type Id
l_copy_rec.incl_cancelled := 'T';
l_copy_rec.line_price_mode := 1;
--l_copy_rec.line_price_date := NULL;
-- l_copy_rec.line_discount_id := NULL;
l_copy_rec.line_descflex := 'T';
l_copy_rec.line_scredits := 'F';
l_copy_rec.line_attchmnts := 'T';
l_copy_rec.line_payments := 'T';
l_copy_rec.return_reason_code := 'WRONG ITEM';
l_copy_rec.default_null_values:= 'F';
l_copy_rec.copy_complete_config := 'T';
l_header_id(1).id1 := &l_orig_header_id;--- replace with original header Id
Oe_order_copy_util.copy_order( p_copy_rec => l_copy_rec
,p_hdr_id_tbl => l_header_id
,p_line_id_tbl => l_line_ids
,x_header_id => l_query_header_id
,x_return_status => l_return_status
,x_msg_count => l_msg_count
,x_msg_data => l_msg_data);
debug_message('End Copying order..');

Kerberos & AFP fails to login via kerberos

Hi,
I am unable to login via afp using kerberos. When i used the kadmin.local -q listprincs comand to list the principals the afpserver is listed. When i change the authorization to kerberos. I revice a : "Connection Failed! The User Authentication Method required by this server can't be found." It was working under 10.4.3 is there any changes since.
PowerMac G5 DP 2.0 Mac OS X (10.4.4)

You get this message:
<blockquote>The server has rejected your login. Please verify that your user name and password are correct. Error Code: 800cccd1 </blockquote>
And Thunderbird can successfully receive/send on the test account but not on your own account, with the same server/port/SSL settings?
Other than the possibility that your password is incorrect...
Does your server require or have you tried entering your login username in this format:
domain\username
I don't know whether the following is relevant to your mailbox (server-side issue): [http://support.microsoft.com/kb/949926 Error when you use an IMAP4 client or a POP3 client to log on to a delegate mailbox of Exchange Server 2007: "800cccd1"].

Using the advanced telemetry Python script (unrecognized signature)

I am trying to profile an AIR for Mobile project (using AIR 3.5) in Scout. I (apparently) cannot compile the project in Flash Builder because it utilizies CameraRoll. I'm trying to add advanced telemetry using the Python script at https://github.com/adamcath/telemetry-utils
First, AFAICT that script has typos in it, where tabs and spaces were mixed for indentation. After fixing those (I think), I always get the error:
"add-opt-in.py", line 158, in <module>
    raise Exception("Bad SWF: Unrecognized signature: %s" % signature)
Exception: Bad SWF: Unrecognized signature: b'CWS'

Hi,
   I have converted all space based indentations to tabs in the attached script and it works fine for all the SWFs that I tried.
   Could you please give this a try with your SWFs and let us know if it works ?
   Dowload link - https://docs.google.com/open?id=0B_py8ocVzd4edG51cEN3MkhPbWM
   If it still does not work, can you send us below details and a sample SWF if possible.
       1. OS : Win / Mac version
       2. Version of Python
        3. Compiler / IDE / SDK used to generate the SWF
Thanks
Srinivas

Access System Resources using Java Applet via Java Script

Hello
I can access my Applet public methods (and this methods access system resources) via Java Script if I do the following: System.setSecurityManager(null);However, I'm making this post because I don't like this solution.
Supposedly, setting the SM to null is like making the Applet (which is signed and was accepted by the user via a prompt from the browser) behave like a normal Java program that has no restrictions. (http://java.sun.com/docs/books/tutorial/essential/environment/security.html, second paragraph)
However, this feels like a workaround of something that is supposed to be there (the SM).
Also, if I make the methods invocation from inside the applet (using swing buttons and textboxes for example) I can use the standard SM without no problems.
From my readings, the problem regarding Java Script invocation, comes from the fact that the Java Script is not a secure (not signed) source (because you can invoke public methods the way you wish from it i guess) on the contrary to the applet methods invoked by the buttons.
Possible solutions I found in the web range from using the public static Object doPrivileged(PrivilegedAction action) method or imaginative things like creating new threads on the public method that call the private methods that access the system resources (supposedly because the new thread runs under the safe environment of the applet)
I almost got a glimpse of hope with this post http://forums.sun.com/thread.jspa?threadID=5325271&tstart=0
However, none of these solutions worked, the only results were with the setResourceManager(null)So, any one can contribute with a solution for this? Should I keep trying to find a solution other then the one I already have?
Regards
Cad

1. yes
2. yes
Note for 2. the converter will run the applet with SUN jre for sure if the user has IE.
IE will use the ActiveX technology to run the applet (as with Macromedia Flash).
For Netscape I am not sure, but I would think Netsape will use the plug in provided by
SUN.
Note for SUN jre 1.3. If this applet is to be used within a company that uses a proxy with
ntlm authentication the 1.3 applet cannot connect (to the Internet) through this proxy since
ntlm athentication is supported since j2re1.4.2_03. There is one version before that but
that one will pop up a window asking for the user's domain account and password wich
is both lame and crappy.
As for the IE settings, IE has a default setting that askes users the "do you trust"
queston for AciveX controls within the Internet securety zone (tools -> internet options
-> security).
Sincy anybody can make ActiveX controls (allso sign them) a user that has a problem
to find the "no" button will sooner or later install a malicuous ActiveX control (spy ware
or a virus).
If this user's desktop is within your company's network it will cause serious harm.
This is why most company's disable this by changing the default internet expolorer
settings. Since I assume you are writhing this applet to be used by a company I allso
assumed that company has someone to maintain the desktops. In that case I
assume that person would want to control the security within the SUN jre instead of
letting the user deside what to trust and what not.

Load an Advanced Print Setting in Acrobat via Java-Script

Hi there,
I'd like to know, if there's a way to load an advanced print setting in the Acrobat via Java Script or some other way? (See Screenshot)
Or is it possible to set an created setting as default-setting? (also via Java or something)
Or can somebody tell me, where these created print settings are saved? (in Acrobat X)
Thank you very much for your help and sorry for my english, I hope you understand me. :-)
Kind regards
Mankro

Why wouldn't you want to set itas part of an input/output parameter?
This is really the right way ofdoing this. Otherwise you'll end up with hardcoded variable name in your customcomponent and that not ideal.
If you're trying to define a default value for it coming from a properties file, you can just make it a "Configuration" variable and set the value from adminui.
Jasmin

Python script integration in SCOM - Example needed?

Hello,
I've been googling around a lot looking for an example of Python script integrated with SCOM. I understood that is possible, but I only find example for PowerShell or VisualBasic (for instance here >> http://opsit.blogspot.hk/2013/11/scom-scripting-basics.html
). This link looks great for what I need, but it's not coded in Python.. :-(
I'm not a native programmer so I'm struggling in reading VisualBasic/PowerShell code and trying to understand how to do the same in Python. Even a simple example of Python+SCOM integration would be of great help in understanding how it works in terms
of libraries to include and input/output between the systems.
Can you point me towards any example of Python+SCOM integration?
Thanks in advance.
W.

Hi,
I would prefer to rewrite your library in Powershell as it is fully supported by SCOM and you also get Powershell Know-How which is always fine :).
A good starting point is always the Python Developers Guide to Powershell ;)
http://mohd-akram.github.io/2013/05/16/a-python-developers-guide-to-powershell
Please find below some Articles about Invoke-Restmethod in Powershell:
http://technet.microsoft.com/en-us/library/hh849971.aspx
http://blogs.technet.com/b/heyscriptingguy/archive/2013/10/21/invokerestmethod-for-the-rest-of-us.aspx
Update: If you want to keep you Python Script you still could write a Wrapper Function for it in Powershell:
https://craigwwright.wordpress.com/2009/05/31/running-python-scripts-inside-windows-power-shell/
Cheers,
Christoph
Blog:
http://blog.cmaresch.at/
Twitter:
LinkedIn:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Is it possible to login via python script ?

Similar Messages

Maybe you are looking for