Is it possible to maintain multiple payment formats with a single Program

Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Similar Messages

Is it possible to maintain multiple pymt frmts with in a single prgm 11i

Hi,
Is it possible to maintain multiple payment formats with in a single program in 11i
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

How can we maintain multiple payment terms for a customer

how can we maintain multiple payment terms for a customer?

Hi,
You can leave the Payment terms field in the sales area data tab blank. and you can enter the payment terms at line item level while creating the sales order. By that you will achieve multiple payment terms for the same customer in the same sales order. but the invoice will be split by standard SAP based on the payment terms.
Also difference between the "Payment Terms" field in Company code tab and the sales Area tab is.
Company code tab payment terms are used only for the documents that are posted directly in FI module. for example credit and debit memos posted directly in FI and as a leading practice this should always be "payable Immidiately"
Sales area Tab payment terms are the one which are copied on to the sales order header data which are valid for all the line items unless you specifically mention different payment terms at line item level.
Regards,
Shantanu

'Format Payment Instructions with Text Output' program ending in error

Hi All,
'Format Payment Instructions with Text Output' program of the payment cycle is completing in to error.
error is:
length of the output - baos::4914
After formatting, periodicSeq is null or empty.{}
length of the output - baos::4914
Exit: iby.scheduler.FDFormatProgramUtils.doExtractAndFormatCommon()
Saving format output.
Enter: iby.scheduler.FDExtractAndFormatting.queryFileSysAttributes
Querying file system output attributes
ppDir: null
ppExt: null
ppPre: null
File system output settings that override the concurrent program default: {}
Exit: iby.scheduler.FDExtractAndFormatting.queryFileSysAttributes
Enter: iby.scheduler.FDFormatProgramUtils.saveToFileSystem()
Concurrent request output file name: /NGFQ2/oraapps/NGFQ2/inst/apps/NGFQ2_dngfdb25/logs/appl/conc/out/o19301342.out
Opened file in append mode: /NGFQ2/oraapps/NGFQ2/inst/apps/NGFQ2_dngfdb25/logs/appl/conc/out/o19301342.out
Exit: iby.scheduler.FDFormatProgramUtils.saveToFileSystem()
Enter: iby.scheduler.FDExtractAndFormatting.saveFormatOutput()
Nov 25, 2009 7:59:16 PM oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig
INFO: oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = oracle.jbo.ApplicationModuleCreateException: JBO-25222: Unable to create application module.;
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:896)
at oracle.apps.fnd.framework.OAApplicationModuleFactory.createRootOAApplicationModuleInternal(OAApplicationModuleFactory.java:476)
at oracle.apps.fnd.framework.OAApplicationModuleFactory.createRootOAApplicationModule(OAApplicationModuleFactory.java:608)
at oracle.apps.iby.util.OAAttachmentServerUtilsWrapper.<init>(OAAttachmentServerUtilsWrapper.java:35)
at oracle.apps.iby.scheduler.FDExtractAndFormatting.saveFormatOutput(FDExtractAndFormatting.java:450)
at oracle.apps.iby.scheduler.FDExtractAndFormatting.doExtractAndFormat(FDExtractAndFormatting.java:421)
at oracle.apps.iby.scheduler.FDExtractAndFormatting.runMainLogic(FDExtractAndFormatting.java:251)
at oracle.apps.iby.scheduler.FDExtractAndFormatting.runProgram(FDExtractAndFormatting.java:141)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
## Detail 0 ##
oracle.adf.mds.exception.MDSRuntimeException: Unable to load metamodel definition because the mmd file file:/NGFQ2/oraapps/NGFQ2/inst/apps/NGFQ2_dngfdb25/logs/appl/conc/log/null/jrad/JRADElementList.xml is invalid.
/NGFQ2/oraapps/NGFQ2/inst/apps/NGFQ2_dngfdb25/logs/appl/conc/log/null/jrad/JRADElementList.xml (No such file or directory)
at oracle.adf.mds.internal.ElementData.<init>(ElementData.java:113)
at oracle.adf.mds.internal.MElementImpl.<init>(MElementImpl.java:480)
at oracle.adf.mds.internal.jbo.JBODefManagerHelper.getSubstitution(JBODefManagerHelper.java:240)
at oracle.adf.mds.internal.jbo.JBODefManagerHelper.getSubstitution(JBODefManagerHelper.java:178)
at oracle.adf.mds.internal.jbo.JBODefManagerHelper.listBindings(JBODefManagerHelper.java:124)
at oracle.adf.mds.jbo.JBODefManager.listBindings(JBODefManager.java:100)
at javax.naming.InitialContext.listBindings(InitialContext.java:406)
at oracle.jbo.mom.DefinitionManager.findSubstituteName(DefinitionManager.java:451)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:411)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:358)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:340)
at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:700)
at oracle.jbo.server.ApplicationModuleDefImpl.findDefObject(ApplicationModuleDefImpl.java:232)
at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:401)
at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:91)
at oracle.apps.fnd.framework.OAApplicationModuleFactory.createRootOAApplicationModuleInternal(OAApplicationModuleFactory.java:428)
at oracle.apps.fnd.framework.OAApplicationModuleFactory.createRootOAApplicationModule(OAApplicationModuleFactory.java:608)
at oracle.apps.iby.util.OAAttachmentServerUtilsWrapper.<init>(OAAttachmentServerUtilsWrapper.java:35)
at oracle.apps.iby.scheduler.FDExtractAndFormatting.saveFormatOutput(FDExtractAndFormatting.java:450)
at oracle.apps.iby.scheduler.FDExtractAndFormatting.doExtractAndFormat(FDExtractAndFormatting.java:421)
at oracle.apps.iby.scheduler.FDExtractAndFormatting.runMainLogic(FDExtractAndFormatting.java:251)
at oracle.apps.iby.scheduler.FDExtractAndFormatting.runProgram(FDExtractAndFormatting.java:141)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
An error occurred. Roll back any changes.
Done roll back changes.
Request completed in error.
Has anybody came across this error. If yes, what needs to be done to resolve this error?
Thanks in advance for your help.
Thanks Again,
Sachin

Hi,
oracle.adf.mds.exception.MDSRuntimeException: Unable to load metamodel definition because the mmd file file:/NGFQ2/oraapps/NGFQ2/inst/apps/NGFQ2_dngfdb25/logs/appl/conc/log/null/jrad/JRADElementList.xml is invalid. Please see if (Note: 556812.1 - R12 Error When Running The Payment Format: JRADElementList.xml is Invalid) is applicable.
Regards,
Hussein

Multiple Form Regions with a single Save button

Hello,
Is it possible to have multiple form regions on a single page, with a single Save button that commits changes in all form regions? If so, would the forms have to be manual forms?
If that is not possible, or a bad way to go with APEX, what are my alternatives?
I am trying to avoid the user having to click through many screens to input the data. Logically each section should be in a different table, but I would like to group some of the sections together to reduce the number of pages the users need to navigate to.
Thanks in advance for your help,
Johnnie
Edited by: johnniebillings on Jun 1, 2009 9:33 PM

Hi Johnnie,
I assume that the tables are related somehow?
If so, you can create a SQL View on the joined tables (making sure that you have a unique ID for each record in the view that can act as the Primary Key), base the form on that view and then use an INSTEAD OF trigger on the view to populate the individual tables.
Andy

Multiple payment term with different day limit

We have three payment terms with multiple day limit. for example: ED11 (day limit 10), ED11 (25 day limit) and ED11 (32 days).
User enter just ED11 but i dont understand how system understand which out of the three is the require payment term.
Users feel that due date calculated is wrong. In most case it calculate the due date exactly based on the days mentioned in the payment term. In all cases, days mentioned are 90 days.
In one case, due date if it is (just 90 days) 30/04 but user feels it should be 10th May in the following (obviously he is reffering to ED11 daylimit 10). In this case, SAP calculate 90 days. Is it because of too many payment terms which same name.
Best,
Bala

Hi,
Please go and check the following path.If teh user wants no. of days as 10, then it should be maintained as 10 in the no. of days field in Payment terms. I think in your case it may be maintained as 90.
IMG->Finacial Accounting->General Ledger Accounting->Accounts Receivable and accounts Payable->Business Transactions->Outgoing Invoices/Credit memos->Maintain Terms of Payment->Check No. of days in Payment terms.
Assign points if u consider this to be useful.
Thanks,
Prithwiraj

Multiple payment advises in one single pymnt document

Hi gurus,
we are having payment advises getting generated through IDOCs, there will be many payment advises for one single customer, so we thought of including multiple payment advises while choosing open item, but system is allowing only one payment advise.
can we go for multiple payment advises
or
we tried to modify the g/l fast entry screen, but in that we did not find the payment advise field.
Thanks in advance.

hello Babu,
now i got the same problem like you.......... you find the solution for tht.....
if you know the solution plz help me
bye laxmi

Is it possible to deploy multiple apps(ContextRoots) into a single stack?

Hi,
We want to deploy multiple Application Codes with different Context Roots to a single JavaStack using SDM. The purpose for it is to support our multiple Test environments(AIT, AFT, Prod Regression or etc.) using a single JavaStack environment. AIT will have AIT Context Root, AFT will have AFT Context Root and etc. Is it possible to do so? If so, how can we configure the SDM to support the deployment? We already know how to change the *.xml file for different context root.
Thanks
J

If the structure of the Excel sheets does not change from file to file then you can by having one ForEach Loop processing always the "Enrolled" sheet and another always the "Engaged" this is doable because the Excel OLEDB connector allows
to pick individual sheets, it is problematic therefore when sheet names themselves change.
MSDN has an example: https://msdn.microsoft.com/en-ca/library/ms345182.aspx
Arthur
MyBlog
Twitter

Export multiple resolutions/formats/versions in single export preset

I would like to be able export multiple resolutions of a project at the same time into separate folders. I can kind of do this now by having multiple export presets and running each of them right after the other and then letting them export simultaneously. Even though the export preset has a folder name specified, I have to manually type in the unique project name into each export preset. Unfortunately this becomes a little bit cumbersome as I often use 3 or 4 export presets for each project, and I may be exporting multiple projects at the same time. Obviously it makes sense to just type the unique text once (or have it automatically read from metadata) to avoid typos and make it easier on me.
I think there are two parts to make this work. The first is using metadata to name the folder name (to ensure unique foldernames), and the second is to allow "export preset groups" that export multiple presets together.
Here is my scenario:
I have three export presets:
600px saves to subfolder "project 600px for web"
2400px saves to subfolder "project 2400px for print"
600px watermark saves to subfolder "project 600px watermark"
So I have to type the real project name, replacing "project" three times for each project. This information could be easily entered automatically because lightroom already has that metadata in the folder name, or collection name.
This could be entered for the folder name in the same way custom file naming is done with the Filename Template Editor.
Another option would be use the Custom Text field in the Filename Template Editor to manually enter the project name if it's not already in some metadata field.
All of this already works great with the file name options, it just needs to be applied to the folder name as well.
Once the folder naming is taken care of, just group multiple presets into a preset group, or allow to select multiple presets at once, and exporting multiple resolutions/formats/versions of a group of images is made easy.

Thanks Rob
Your export plugin does allow running multiple export presets in a single group, however it still doesn't address the folder naming issue. Using your tool, I can easily initiate my multiple presets in a single export, however I am stuck using the generic foldername that I specified in my original export preset. This means that after the export completes, I still have to rename the folders to the particular project name. I would save the time of typing the project name into lightroom, but then just have to repeat that same task later outside of lightroom. It also prevents me from exporting two projects at the same time (or one after the other) because both projects would end up in the same generically named folders.
That said it is a useful plugin that I will likely use under the specific scenarios where it does work.

Multiple payment options with single iTunes account

I use itunes as a resource for teaching music. I also use it as a resource for our church's music ministry. I want to use a gift card for church purchases and my credit card for my business purchases so I can accurately track my business vs. personal expenses. Is there any way to have multiple payment options under one account? I haven't been able to locate any info on this...
Any help would be greatly appreciated!

Sorry, but to the best of my knowledge, you can only have a single payment method for a give iTunes Music Store account. You can use a gift card with an account with a credit card, but the iTMS will charge the gift card balance first until it runs out; there's no way to allocate certain purchases to the card and others to the credit card. If you want to keep them separate, you'll have to have two separate iTunes Music Store accounts (you can have up to five accounts on a single computer).
Regards.

Multiple iTunes accounts with a single ipod?

I just bought my daughter a new ipod Touch. Will she be able to download music into the ipod from both my itunes account and from her mom's seperate itunes account, or will her ipod only be able to be associated with a single itunes account? Thanks.

You can use multiple iTunes accounts on one iPod. Just note that you can only sync with one iTunes library/computer. However, yu can manage music among different computers. See:
Using iPhone, iPad, or iPod with multiple computers

Replace multiple space characters with a single space

Hi,
Oracle 11g R2.
Looking for a way to replace multiple space characters in a row with a single space. For example, the text "abc abc" should look like "abc abc". I tried toying with replace, but it only works for the case of 2 spaces. Need a solution for the cases where there could be 2 or more spaces.
select replace(column1, chr(32)||chr(32), chr(32)) from tablea

Hi,
If you had to do this without regular expressions, you could use:
SELECT REPLACE ( REPLACE ( REPLACE (str, ' ', '~ ')
                 , ' ~'
          , '~ '
          )     AS new_str
FROM    table_x;assuming there is some sub-string (I used '~' above) that never occurs right next to a space.
However, unless you're uisng Oracle 9 (or earlier, which you're not doing) you don't have to do this without regular expressions. As you can see, the way Solomon showed is much simpler.

Is is possible to allow multiple date format strings pass DateFormat.parse?

I'm trying to use DateFormat.parse to validate a date in the 20/12/08 format. I would like to allow users to input 20-12-08 or 20 12 08.
The code currently looks like this:
formatter = DateFormat.getDateInstance(DateFormat.SMALL, US);It is currently throwing an exception if 10-12-08 is sent in where as 10/12/08 works just fine.
Is there a alternate us locale that is more lenient?
setLenient(true) didn't solve the problem for me. I think that would accept 32/12/08 not 10-12-08.
I could parse the date string and replace - or ' ' with a /.. Is that best practice?
What other options do I have? Could I use SimpleDateFormat somehow?
Thanks for the input

That just doesn't seem clean. It will work, but I would rather not have a valid application flow use an exception to get its job done.
The application is also international, so many locales on one format is valid. The US user base seems to think they can type in the date however they want. So passed into the method is the locale, I would have to modify a lot of code to send in a list of valid locales.
The best solution for me would be to have a locale that would allow - or ' ' or /. That way I still only have to make one call to df.parse and an exception produces an invalid date message. Is that possible?
Thanks

Maintain multiple video formats as versions

I have a large Aperture library of personal photos and videos from a history of digital cameras going back over 10 years. The videos are in a number of formats ranging from AVI, MPEG, MP4 and MOV.
I have had issues syncing videos to our iPhones/iPad through iTunes using the Aperture library as the sync source due to the video format not being supported (there are a number of discussions on this forum that talk about this error). From what I can gather, iTunes will only sync certain supported video formats, requiring the videos to be converted accordingly. The majority of my videos fall into this category.
I want to try keep all my videos in their raw format and was thinking maybe I can create iTunes friendly versions of the videos (mp4 or m4v etc) and store them in Aperture as versions of the orginal videos. I have looked at a few articles that mention videos can be externally edited (http://aperture.maccreate.com/2011/03/14/setting-mpeg-streamclip-as-your-externa l-video-editor-aperture-3/) and saved back into Aperture as versions, however I have not been able to get this to work correctly and am usually prompted upon saving to pick a folder location for the new version. I'm not sure how this works in a managed Aperture library.
Has anyone had any experience with this or can offer any solutions?
I was considering writing a plugin or AppleScript to go through my library and do this automatically, however I'm not too sure how feasible the option of hosting multiple video files linked back to one master is.
Thoughts or suggestions welcome.

To alleviate confusion, a "version" in Aperture world is a master image that has had changes applied to it in Aperture. Aperture gives you a thumbnail or preview of the master using the changes contained in the version file.
What you want to do cannot be done by using versions, because video is not edited in Aperture. That is why each time you edit it with an outside editor, it is asking to import as a new Master, and thus, where you would like to store it. In a managed library, master images are stored in the Aperture library along with everything else. In a referenced library, the masters are stored wherever you like and only versions ("changes") and preview files are stored in the library.
The answer to your question is to use stacks. Import all your converted videos and stack them with the originals. Use the "friendly" version as the stack pick. It should be seen by other programs. When you want that original "unfriendly" file, its in the stack. This will double all your videos though...you won't have versions, you will have two masters.
There is no need to write an applescript. View all your picturs, then use the magnifying glass tool in the top right corner of the browser view. Click on "Add rule", go to file type, and pick movies. Or, conversley, you could display everything that is not an image. Then you can see all your videos and drag them to an album. You could also make a smart album that contains all your videos by adding the same rule. I highlighted my movies in purple using the metadata editor. Much faster to spot them.
My personal point of view is that doubling your videos will make your library much larger unless you are using referenced masters. If you are using a managed library, you could make the original, unsharable videos referenced once they are stacked. Aperture would know where they are, but not keep them in the library. If you are unfamiliar with referenced masters, I would either learn about them or use the method below.
I don't see much point in even keeping videos in formats that cannot be shared, edited, or viewed by the programs you want, unless its solely for organizational purposes or you are mixing work and life. I would just convert all the movies, leave the originals in an untouched folder, then import the converted ones I am actually going to share and watch into Aperture. But I can easily imagine reasons to use the stacks method as well.
Good luck, hope that all made sense.

Is it possible to use multiple hard drives with iphoto?

I am pretty new to Mac's so bear with me, I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives. Is it possible to run iphoto with multiple hard drives without the photos loading onto my Imac? If so, How do I set it up. I have tried importing to a external drive, but when I check the file path of the photos it shows my Imac hd in the address. I seriously dont know why I cant just add the external hard drive as a library and have Iphoto work, Help

There are instructions - and not the caveats - on how to do what you want below.
However, you'e not quite grasping iPhoto:
I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives.
When you do this, you're using the Finder (or file manager) to categorise the photos. All well and good, but why? That's exactly iPhoto's job. iPhoto is a database designed to help you manage your pics - including categorising them.
Anyway:
*How to do it:*
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
*What Happens:*
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. *Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.*
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
If you really want to spread your photos across volumes like this, Aperture would be a better fit.
Regards
TD

Is it possible to maintain multiple payment formats with a single Program

Similar Messages

Maybe you are looking for