Is it possible to make a ocr application in xcode 5 for ios 7?

If so where do i go? What do i do? Are there any downloadable projects for xcode 5 ios 7? Thanks

I want ocr in my latest project. Im a begginer so if you could help me with how to install/open an openocr source i would apreaciate that alot

Similar Messages

  • How to add iad's to window based application in xcode for ios

    hello,
    Im trying to add iad's to a window based application. I add the framework and add the banner in interface builder. The program builds without any problems but when I try to run the application on the simulator, the app crashes. Don't know what im doing wrong. Do I need to add any extra code or something. Please help, thanks in advance

    hello,
    Im trying to add iad's to a window based application. I add the framework and add the banner in interface builder. The program builds without any problems but when I try to run the application on the simulator, the app crashes. Don't know what im doing wrong. Do I need to add any extra code or something. Please help, thanks in advance

  • Is it possible to make an air application maximizable/non-maximizable programmatically at runtime?

    Is it possible to make an air application maximizable/non-maximizable programmatically at runtime?

    Sort of. Technically it's a NativeWindow which is maximizable or not, not the app itself. A NativeWindow is created as maximizable or not via NativeWindowInitOptions, and it can't be changed after it's created. Now, when you setup the "default content" window options with AIR, the runtime is basically creating the first window for you as a convenience, with those settings. However, there's nothing stopping you from making your initial content nothing more than a hidden window which will create a new window as maximizable or not. At this point, it would not be hard to re-create your main window with different maximizable values. (This is also how I implement multiple-instance/window apps, since only 1 AIR app can be running at a time.)
    Hope that helps!
    -Aaron

  • Is it possible to import a pdf figure into Keynote for iOS?

    Hi,
    I was eager to use Kynote on my new iPad Air to make some presentations. But I use a lot of vector graphics in pdf and eps format for my figures. I found out that it is not possible to import such file format into Keynote for iOS. I understand that .eps might be quite outdated already and will never be supported but pdf?!
    It would be best if I could insert my figures directly from Dropbox but since this doesn't seem possible I would be happy to download my pdf figures to iBook for example and import them from there. This doesn't seem to be possible either. Keynote allows me only to browse my photos and it is not possible to put pdf files in Photos.
    Overall - big disappointment from Keynote for iOS to me. It is unusable for my needs and preferences.

    You can import pdf's in keynote!
    Make a pdf with Indesign or something like that. Make sure your pdf has the same resolution as your Ipad: For example, Ipad Air: 2048 x 1536 pixels. (In Indesign, you'll have to create a doc with intent Web (instead of print).
    Then, use a file manager app, like File Manager Pro (https://itunes.apple.com/NL/app/id558270538?mt=8&affId=2083450) to copy the pdf's to your Ipad by using WIFI.
    In the app File Manager Pro, just select your pdf and copy it.
    Now start Keynote, create a new presentation and create a blank sheet.
    Now you can paste, and your pdf will appear, transparant and exactly the same size as your presentation.

  • Is it possible to digitally sign a document in reader for iOS?

    We sign documents using adobe reader 9.3 & std/pro 9.2 0. Can we create a digital signature and sign documents?

    Steve,
    Thanks for your reply.
    I did not think it was possible as yet.  We have many engineers and Pilots
    that wanted to use their iPads to sign documents.  This would eliminate the
    need to go back to their PC.
    I don't expect this feature to be too far in the future.
    Again thanks,
    Michael L. Pope
    Engineering Process Writer II, Dept 0663
    Engineering Operations
    Gulfstream Aerospace Corporation
    Tel. (912) 965-7362  Fax (912) 965-7650
    [email protected]
    This e-mail message, including all attachments, is for the sole use of the
    intended recipient(s) and may contain Personal Information under General
    Dynamics policy CP 07-105 and/or legally privileged and confidential
    information.  Any Personal Information can be accessed only by authorized
    personnel of General Dynamics and its approved service providers and may be
    used only as permitted by General Dynamics and its policies.  Contractual
    restrictions apply to third parties.  If you are not an intended recipient,
    you are hereby notified that you have either received this message in error
    or through interception, and that any review, use, distribution, copying or
    disclosure of this message or its attachments is strictly prohibited and is
    subject to criminal and civil penalties.  All personal messages express
    solely the sender's views and not those of Gulfstream Aerospace
    Corporation.
    If you received this message in error, please contact the sender by reply
    e-mail and destroy all copies of the original message.
                                                                                    From:       Steve Werner <[email protected]>                                                                               
    To:         mpope5 <[email protected]>                                                                               
    Date:       03/05/2013 11:32 AM                                                                               
    Subject:    Is it possible to digitally sign a document in reader for iOS?                                                                               

  • Edit application settings AIR for iOS not working

    Hi all,
    I'm trying to create a .ipa so I can test my app on my iPhone but my Flash cs6 will no longer let me edit application settings so I can publish the file.
    The first time I did it, it was working fine. I added my certificate and my Provisioning Profile and published a .ipa file.
    Now, when I click the wrench tool icon or go through the file menu and select AIR for iOS settings, nothing happens. All it does is generate an .xml file for me ("filename"-app.xml).
    What is wrong and how can I fix this?
    I've tried rebooting.
    I have the same problem on Flash cs6 and Flash cs5.5 on two different computers.
    I have an iOS development Certificate.
    I have an iOS development Provisioning Profile.
    Thanks in advance for your help!
    Cheers,
    André

    Here's the link to the bug report in Adobe bugbase:
    Bug#3850040 - Flash CS6 crash
    Everyone PLEASE up Vote this bug ASAP!   (right side panel - under Attachments section)
    It's been 2 weeks since the bug was reported and it's status is still "unverified"...

  • Is it possible to make an Autostart application in Java?

    Hi,
    I have some stuff that I would like to burn on a CD and I thought that it would be very nice if I could put an autostart application on the same CD which would start as soon as I put this CD in CD-drive. I dont know whether this can be done in Java. I am using Excelsior Jet so I would make this as an usual autostart.exe application.
    Thanx

    The only thing you have to do, is to put the JRE on the CD as well. Say in sub-directory jre (you can copy the jre folder from your JDK installation)
    I'm not sure how the autostart stuff works, but as far as I can remember it's just the name of an exe. So you could put someting like
    jre\javaw.exe -jar MyApplication.jar
    into the autostart definition

  • Is it possible to make a screen control appear only for a specific patch?

    I use MainStage almost exclusively for guitar. Frequently I will use different guitar amps in different patches (usually the AmpliTube plugin, but occasionally Amp Designer). I'd like to use different screen controls for specific patches. For example, I might be using a Marshall JCM900 amp model for one patch, and a Vox AC-30 Top Boost amp model for a different patch. The Marshall has a gain control, and a master volume, but the AC-30 only has a master volume. Conversely, the AC-30 has a top cut control that doesn't exist on the Marshall.
    Is there a way to hide the screen control for the Marshall gain on a patch that uses an AC-30 model?
    It seems like there would be many, may scenarios where controls that are relevant to one patch would be undesirable with a different patch, but it seems like screen controls are global for an entire concert. Sure, a given control can be mapped to different parameters in different patches (but you can't give a screen control different names in different patches), but there's limited space on a layout, and it seems wasteful to have to provide a given screen control that might only be relevant for one patch out of a dozen in a given set or concert visible in every single patch.

    Hi
    Standard Screen Controls will always appear in Edit Mod and in Perform Mode for a given Concert. Controls that are not assigned to any parameter will be grayed out in Performance Mode. To do this, select the control in Edit, and choose "None" in the Screen Control Inspector.
    Smart Controls adapt for a particular Patch. Different layouts can be assigned per patch.
    ericmurphysf wrote:
    you can't give a screen control different names in different patches)
    That depends on the method you used to name them in the first place:
    Controls can have different formats of labelling ( done in Layout mode), where they can show the particular parameter name etc etc. These can change from patch to patch.
    You can assign a "Hardware Label" that is global.
    Separate Text labels can have global or Set/Patch labels, and they can be labelled for a single Patch by overriding any higher level labelling
    hth
    CCT

  • HOW TO MAKE A REVERSE VIDEO IN IMOVIE FOR IOS

    I woud like to know, if possible, in how to make a reverse video in my IPad.
    Thanks to everyone!
    G'day.

    Searched for a solution and I found a video tutorial about this:
    http://www.imoviehowto.com/imovie-ios-8-how-to-reverse-a-video-clip/

  • Is it possible to do a L-Cut in iMovie for iOS?

    I would like to start the audio of the second clip at the end of the first clip. Is it possible to do such a L-Cut in iMovie on my iPad?
    Thanks for answers,
    Thomas

    I am looking for the same info on l-cut. it seems like the audio attached to the clip should have separate handles or at least have a way to detach it.  btw, i had a big breakthrough in clip management to share. if you use iphoto u can actually remove, archive and sync clips from the pad (sorry pc users). i guess that was overlooked in the help menu.

  • Is it possible to create pull-down menus in Numbers for iOS ?

    Ideally, I would like to propose values for a text column according to a list in another table. Strolling on the different helpfiles for iwork/numbers, I more or less saw this feature on the Mac version. What about the iOS version ?

    I am looking for the same info on l-cut. it seems like the audio attached to the clip should have separate handles or at least have a way to detach it.  btw, i had a big breakthrough in clip management to share. if you use iphoto u can actually remove, archive and sync clips from the pad (sorry pc users). i guess that was overlooked in the help menu.

  • Is it possible to make a game for a mobile phone?

    Im a new newbie(means that i completely unaware of J2ME programing)
    I wonder if it is possible to make a game to my pc for a mobile phone and then send it to the mobile using Irda
    ..or more generally if a mobile phone uses or supports j2me can i change the menu(ex add something like a calculator)
    Thanx!!

    Yes, if your phone supports both J2ME and reciving applications by IRDA, but you will need to learn Java, and the J2ME APIs.
    http://developer.java.sun.com/developer/onlineTraining/

  • Is it possible to make a composite picture using Faces.  e.g. for a family xmas card ?  If so, how is it done ?

              Is it possible to make a composite picture using "Faces" for example on a family Xmas or other Greetings card ?
                   Eric

    Afraid not.
    You can make composite images with a Photo Editor and use that.
    In order of price here are some suggestions:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

  • Is it possible to make a broadband connection in iOS for ipad?

    Hi, is it possible to make a broadband connection on iPad using iOS 6.1.3 ?
    As I had this problem in my apple devices, I searched a lot and finally I found out how to make a broadband connection like what what we do on widows 7 or windows 8 on Mac OS X mountain Lion, but I still can't make it on iPad, I just want to know if it's possible.
    Thanks.

    For example, in the university where I study in order to use wi-Fi you are given a user name and a pass word first you connect to the Wi-Fi but you won't have access to the Internet if you just try to connect to the Wi-Fi after that you have to connect to the broadband you've made in your PC with that username and password, this is what I mean. Of course I have used Wi-Fi this way on windows and Mac but not in iOS.

  • E71 : Is it possible to make a shortcut to the mai...

    Is it possible to make a shortcut to the mail for exchange inbox? I am used to having the inbox accessable from the main screen and I would like to find a work around.
    Any ideas?
    Message Edited by massi on 16-Aug-2008 12:35 PM

    On Eseries device you can assign the Mailbox key to this MfE Inbox.
    However, most Nseries devices do not have such a key.

Maybe you are looking for

  • PI 7.1 HTTPS Communication

    Hi PI Experts, We are enabling HTTPS communication in PI 7.1 EHP1 using CIDX adapter. We have nearly completed settings after going through several threads and sap help documentation. 1. Defined SSL parameters in RZ10 (ssl/pse_provider = Java and oth

  • How do I turn on multiple desktops in Lion?

    How do I turn on multiple desktops in Lion?  I have a new (Aug 2011) MBP with Lion, and cannot find any way  to create one.  I have no "+" icon on mission control. I do have the high res screen, and some data appears to be off screen.  They worked fi

  • Canon Eos-1d

    I have a Canon Eos-1d and a Mark II. They have a firewire connection. Does anyone know if they can be connected to the firewire cord and plugged into the iPod? Is there any way I can get my photos, including raw off of the camera and onto the iPod? G

  • I am looking for a kitchen design ap. photo the kitchen, then clone a new stone countertop and cabinet finish. Help please

    I am searching for an app which would clones new materials onto a photographed kitchen. do you have one?

  • CS4 to CS5: Jagged edges and color shift

    Hello, world! I have a problem when I try to open Flash CS4 file in CS5. In the workspace, the edges of shapes become jagged, and the colors shift. But when I export the image as PNG with CS5, everything looks normal. What is causing this?