Is it possible to pass the Interactive Form on dynamic?

Hi,
Is it possible to pass the Interactive Form on dynamic?
In webdynpro I am handling the header part that will be common for the entire input screen, based on the application name I want to call the different interactive forms. I have seen in template source there is no option to provide binding with context.
Regards,
Mahesh.Gattu

Hi Mahesh,
You can create different views with different PDF forms in their template source and dynamically navigate to the required view/ make the required view visible.
say on your main view, create the header part with the necesaary UI elements and insert multiple view containers below it. Embed a pdf view in the respectve view containers.
Create a context node UI_RENDER .. cardinality 1..1
Create attributes pdf1_visible type wdui_visibility
pdf2_visible and so on. Bind these to the visible property of the respective view container.
based on the application name, set them to either visible or invisible.
Hope this helps.
Regards,
Reema.

Similar Messages

  • Is it possible to create Adobe Interactive form in ECC 5.0 IDES using WDA?

    Hi every body,
    I am trying to create an adobe interactive form in ECC 5.0 IDES using Web Dynpro for ABAP. But I am facing some configuration problems. My doubt here is -> "Is it possible to create abobe interactive forms in ECC 5.0 IDES using Web Dynpro for ABAP ?"
    Please help me out.
    thanks in advance,
    best regards,
    naveen.

    Hi Naveen,
    ECC 5.0 is NW04 - not NW04s so you don't have WDA at all as you should be able to see from e.g. it not appearing in the list of possible programming objects in transaction SE80.
    You'd need ECC 6.0.
    Double-check your SAP_BASIS release in menu System > Status > Component Information.  If it says 6.40 then that's no good... you need to be on 7.00.
    You can still use Java WebDynpro with ECC 5.0 of course.
    Regards,
    Jocelyn

  • Drop-downs on the interactive form?

    Hello
    I put a drop-down field (its lables is COUNTRY OF VISITOR ) on the interactive form (my_form_of_visitor_info) and bound it to a data source, which data source is passing USA, UK, fine, working well. It should always ALLOW only 3 characters max. length
    I also gave a ability to modify/input end-user own value in this drop-down field by checking  "Allow Custom Text Entry" box of the field tab of the object palette, fine.
    To accommidate all the label(COUNTRY OF VISITOR) of the field, i gave the WIDTH as 5 inches.
    But, now user is entering CANADA, but It should always ALLOW only 3 characters max. length. I did not see any MAX.CHARACTERS ALLOWED feature for the drop-downs as like TEXT FIELDS!
    Pls. let me know, How can i get it done this rquirement that systsem should allow ONLY 3 characters in this field? I saw some VALIDATION PATTERN for Zipcode, Tele #..but, i am not sure can i use it for my drop-down field? if so, How?
    Thank you

    see the answer in your other post

  • Problem in accessing the Interactive forms in an ISR Senario(like MSS)

    Hi all,
    I am facing a problem whenever I try to access the interactive form.I am doing this from the standard Business Package, MSS.
    I have done all the configurations needed for these ISR Senarios.
    I suspect the the error is because of some missing IMG customizing.
    Pls provide some directions to solve this problem.
    Exception 1)
    initial exception that caused the request to fail, was:
    com.sap.tc.webdynpro.services.exceptions.PDFDocumentCreationException: ../../sap.com/pcui_gpisr/IsrForm/wd_key13_1171540676406/Error+PDF.pdf?sap-wd-download=1&sap-wd-dl_behaviour=1&sap-wd-cltwndid=DefaultExternal1171589446921&sap-ext-sid=dIiSA97eM6QRuNvwpwdigw%3D%3DzPkd%2BOwplNQFa31FtlR6vA%3D%3D%2Fpcd%3Aportal_content%2Fcom.sap.pct%2Fspecialist%2Fcom.sap.pct.erp.busunan.bp_folder%2Fcom.sap.pct.erp.busunan.roles%2Fcom.sap.pct.erp.busunan.business_unit_analyst_20%2Fcom.sap.pct.erp.busunan.business_unit_analyst_20%2Foverviewfolder%2Fcom.sap.pct.erp.busunan.overview_2%2Fcom.sap.pct.erp.busunan.masterdata_1%2Fcom.sap.pct.erp.common.isrform_page%2Fsap.com%2Fpcui_gp%7Eisr%2FIsrForm%2Fbase&sap-wd-norefresh=X&sap-ep-version=7.00.200611091758
    Exception 2: This Exception occurs when I try to run the application(sap.com/pcui_gp~isr/IsrForm) from the Webdynpro Content Administration Screen.
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No scenario specified
    at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
    at com.sap.pcui_gp.isr.isrprocessevent.init.VcISRInit.onBeforeOutput(VcISRInit.java:228)
    at com.sap.pcui_gp.isr.isrprocessevent.init.wdp.InternalVcISRInit.onBeforeOutput(InternalVcISRInit.java:181)
    at com.sap.pcui_gp.isr.isrprocessevent.init.VcISRInitInterface.onBeforeOutput(VcISRInitInterface.java:139)
    at com.sap.pcui_gp.isr.isrprocessevent.init.wdp.InternalVcISRInitInterface.onBeforeOutput(InternalVcISRInitInterface.java:136)
    at com.sap.pcui_gp.isr.isrprocessevent.init.wdp.InternalVcISRInitInterface$External.onBeforeOutput(InternalVcISRInitInterface.java:212)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:602)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:568)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
    Thanks in advance,
    Sethu

    Hey Sethu,
    Check the QISRSCENARIO settings.Also make sure that your ADS is configured.
    Also, please make sure that you have maintained all the settings which are mentioned in this link.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/3b/52dd3747934311abee4376f383fdf2/frameset.htm
    Regards
    <i><b>Raja Sekhar</b></i>

  • On the interactive form - the filter icon

    I have a user that has a dumb question, they want to the filter to go away they selected when they come back to the first page of the interactive form, when there is no data left.
    Of course all they have to do is click the x to make the filter list appear. The reason it says no data when you go back to the first form is that that records no longer meets the criteria for the filter. The user wants the filter with the green check and the red x to disapear if there is no data left for that filter.
    Hope this makes sense.

    Hi -
    Two things you might want to look at are:
    1) To reset an interactive report in a link, use the string "RIR" in the Clear-Cache section of a URL. This is equivalent to the end user choosing the Reset option from the interactive report actions menu on the target page. The report is returned to the default report settings specified by the developer.
    or
    2) You can reset a report with a js call also: javascript:gReport.reset()
    Good luck.

  • Attachments added to the Interactive form is lost after submit

    Hi All,
    I have a scenario where the user can add attachments to the Interactive Form Online and click on Submit to archive the filled form. The problem is that i am not able to retrieve the attachments added to the form.
    The datasource of the ITF is bound to the View Context node and the pdfsource is bound to an attribute of XSTRING type.
    Here i am able to see the changed values of the Input fields in my context node. But, any attachments added is lost.
    How can i retrieve the attachments? I tries calling the Methods SET_TASK_GETATTACHMENTS and GET_ATTACHMENTS of PDF Objects but it always returns null.
    FYI,
    if i use file upload UI Element and upload an existing form with attachments then i am able to get the list of attachments by calling the Methods SET_TASK_GETATTACHMENTS and GET_ATTACHMENTS of PDF Objects before this PDF is displayed in the next view. (binding the XSTRING of FIle Upload UI to the PDFSOURCE of the ITF).
    Here also if i add some new attachments to the PDF and click on submit then these new docs are  lost.
    In short whenever i add attachments to the pdf dynamically via add attachment option after the PDF is displayed the new attachments are lost.
    Please let me know how to correct this.
    Thanks,
    Abhishek

    There is a default functionality provided by Adobe... If all your fields are field, you can not submit. It will prompt .. to fill the form.
    Only you have to mark those field as mandatory.
    So select the field -> Go to Object Pallet -> Value Tab -> select the type as User entered Required
    This will solve your problem.
    You can also customise the requirements through scripting language.
    cheers
    Satya

  • How to display grid the interactive form

    Dear All
    I m trying to print the grid into the interactive form using adobe life cycle 8.1.
    My requirement is like I am getting the value in my local node in the view. From there i have to populate those value into the Pdf.
    So that user can take the print of the pdf.
    Value are getting in local. But it is not showing in the PDF. At the same time in other value are showing success fully only inthe table i am not able to get the value.
    Kindly help me out with your document or solution note
    Prashant Krishen

    Hi Prashant,
    For populating a table on a pdf the node structure should be different.
    You need to create node structure of the data which you want to show in Table like this
    DataNode            0..n
        SubNode         1..1
              att1
              att2
    Create the elements of DataNode only and set the attribute values.
    Now create the structure of the UI element in Form like this
    Subform1
            Subform2
                   Header1
                   Header2
            Subform3
                   Textfield1
                   Textfield2
    Bind the Subform3 to the node DataNode and Textfield1 and Textfield2 to att1 and att2 respectively.
    Set the 'Repeat Subform to each data Item* property of Subform3 to true.
    Now at runtime you will get all the data of the node in PDF form as a Table.
    Regards
    Ravindra

  • Is possible to take the Infopath form with two repeat section in one SharePoint list

    Is possible to take the Infopath form  with two repeat section in one Sharepoint list 
    Take two repeat section and put them one bellow to other one in a SP list.
    The motive is that the first repeat section is based in account own by the requestor and the second repeat section is when the requestor is doing backup time for some one else where need to log the amount of time that spend in the peer account.
    I have basic logic in the form when requestor said Are you doing backup for some else? and press YES it is be able to use the second repeat section.
     Le me know how much pain full is going tobe or not..
    –Q1: Is possible to do this ?  With codeless or not
    –Q2:What steps I need to do to accomplish this?  feasible or not
    the following picture give a better idea of what I am looking to accomplish:
    CRISTINA&amp;amp MICROSOFT Forum

    Hi,
    Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
    Thanks,
    Linda Li
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • Is it possible to pass the idoc between the same client

    Is it possible to transfer the idoc between the same system. I do not have two clients . I have only one client access. Is it possible to pass the idoc between the same client.

    Hello Preethy,
    This would not be possible as when you have to create the logical systems, you cannot create two entries for the same client.
    And  while defining the partner profiles as well.
    IDocs are basically for two systems or two clients.
    YOu may not require IDoc in one system itself.

  • Is it possible to pass the property value dynamically to composite.xml

    Hi,
    Is it possible to pass the property value dynamically to composite.xml from bpel?
    For ex:
    <property name="bpel.config.auditLevel">$variable</property>
    I will get a different $variable value every time to bpel.
    Also, when I included the following code inside .bpel
    invoke name="InvokeListFileFTPAdapter-ListFiles"
    partnerLink="ListFilesFTPAdapter"
    portType="ns3:FileListing_ptt" operation="FileListing"
    inputVariable="listfilesRequest"
    outputVariable="listfilesResponse" bpelx:invokeAsDetail="no">
    <bpelx:toProperties>
    <bpelx:toProperty name="bpel.auditLevel"
    variable="AuditVariable"/>
    </bpelx:toProperties>
    </invoke>
    where auditvariable='Off'
    I don't see any change in em. The invoke activity is showing full payload, Can't we turn off the audit level from .bpel not from composite.xml

    Hi,
    You can use bpel preferences for that:
    1.
    In the composite add a property, for ex:
    <component name="test">
    <implementation.bpel src="test.bpel"/>
    <property name="bpel.preference.exam">abc</property>
    </component>
    2.
    To get the value within your bpel process use: ora:getPreference(exam)
    3.
    Then, you can change the value in the EM:
    Under Farm_soa_domain>weblogic domain>your_domain>soa_server1
    Right click on menu>system Mbean browser>oracle.soa.config>server:soa_server1>SCAComposite>your project>SCAComposite.SCAComponent>processName>
    Now, click on the properties attribute : you can see the exam property and change the value.
    Arik

  • Syntax error in the Interactive form methods

    Hi all,
    In one of the method of the interactive form i am using the below statement
    DATA:LS_ZDYN_TBL_FORM type WD_THIS->ELEMENT_ZDYN_TBL_FORM.
    When i use the above statement i am getting the following syntax error
    The type "WDCTX_ZDYN_TBL_FORM" is unknown.          
    Thanks in advance
    Ajay

    Try following thigs:
    1) Make sure that you have created node 'ZDYN_TBL_FORM' in the context
    2) try following code: WD_THIS=>ELEMENT_ZDYN_TBL_FORM.
    3) If you are writting this code in the method of a view, try following code:
      DATA: t_data TYPE if_<view_name>=>elements_ZDYN_TBL_FORM.
    Regards,
    Saket.

  • Unable to open the interactive form

    Hi,
    I have created a interactive form.
    I'm trying to send this as an e-mail attachment.
    I'm able to receive the mail but I'm not able to open the interactive form.
    Can someone help me on this.
    Regards
    Nancy

    Hi Nancy,
    Check this Code.. i am able to open the ADOBE in my SAP Inbox.
      ie_outputparams-device   = 'PRINTER'.
      ie_outputparams-getpdf = 'X'.
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = ie_outputparams
        EXCEPTIONS
          cancel          = 1
          usage_error     = 2
          system_error    = 3
          internal_error  = 4
          OTHERS          = 5.
      IF sy-subrc <> 0.
        WRITE : 'Exit at FP_JOB_OPEN'.
        EXIT.
      ENDIF.
      docparams-langu = 'E'.
      docparams-country = 'US'.
      docparams-fillable = 'X'.
    * Get the name of the generated function module
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = <adobe-form-name>
        IMPORTING
          e_funcname = e_funcname.
      IF sy-subrc <> 0.
        WRITE : 'Exit at FP_FUNCTION_MODULE_NAME'.
        EXIT.
      ENDIF.
    CALL FUNCTION  e_funcname
    EXPORTING
    *   /1BCDWB/DOCPARAMS        =
       PERNR                    = p_pernr
    IMPORTING
       /1BCDWB/FORMOUTPUT       = output
    * EXCEPTIONS
    *   USAGE_ERROR              = 1
    *   SYSTEM_ERROR             = 2
    *   INTERNAL_ERROR           = 3
    *   OTHERS                   = 4
      IF sy-subrc <> 0.
        WRITE : 'Exit at e_funcname'.
        EXIT.
      ENDIF.
      CALL FUNCTION 'FP_JOB_CLOSE'
    * IMPORTING
    *   E_RESULT             =
       EXCEPTIONS
         usage_error          = 1
         system_error         = 2
         internal_error       = 3
         OTHERS               = 4
      IF sy-subrc <> 0.
        WRITE : 'FP_JOB_CLOSE'.
        EXIT.
      ENDIF.
    code for  Sending and code for attachment goes here.
    Let me know if it works.
    ~ Bhawanidutt.

  • Capturing the changed data in the interactive forms through HTML Viewer

    Dear all,
    I'm showing the Interactive Adobe form in the HTML Viewer and I want to capture it back after the user enters data in the form and save it to application server.
    Can I get some help on this. Please attach supporting documents if any.
    Regards
    Aravind

    sorry i've got no document describing this. under service.sap.com/adobe you'll find a lot of Adobe content.
    But basically use the Adobe Designer from program files\adobe\design 7.0\formdesigner.exe
    create new form based on the CAF tutorials in the Interactive Forms section, add a new data connection to a wsdl, bind input/output parameters to form fields and get a button executing the wsdl operation.
    create your interactive form callable object based on that template, configure the form to start process and as impersonalized form. create the form from the GP administration screen, download it and test it.
    ...And Good Luck!!!

  • Is it possible to pass the score of the memory game as a variable using javascript?

    Hi,
    I would like to create a score table for the memory game. For that I need captivate to pass the last sore to a form/page. In the memory game widget there is a variable displayed: memGame_var. Is this really the memory game score, and do you think that I can achieve my goal using javascript?
    thank you!
    Heloisa

    Beware: you have to create a variable, it is not automatically created. And you don't have to use the same name, but in this case for some reason it is not possible to use capitals in the variable name.
    Contrary to some other games, this variable will retain the score indeed.
    Lilybiri

  • Is it possible to use Adobe Interactive Forms in SAP (ABAP) Trial Version?

    Dear All,
    i need some help concerning the usage of Adobe Interactive Forms in SAP (ABAP) Trial Version.
    I installed SAP Netweaver 7.01 (ABAP Trial Version) and i would like to use the Adobe Interactive Form editor (transaction SFP). Is this trial version prepared for this? Is it possible to edit and test Interactive Forms in the ABAP Trial Version too?
    Somebody told me that he installed Adobe Lifecycle Designer 7.1 but the layout manager part of the editor shortdumped when he wanted to go back to other  parts of the editor or he wanted to save what he did...
    Is it enough to install Adobe Lifecycle Designer 7.1? Is there something else to install or configure?
    Thank you for your help in advance.
    All the best, P. Phil.

    Yes, you need the lifecycle designer installed.  That should be enough to work with the SFP transaction.  But to actually use the form, I think you do need the ADS(Adobe Document Services) which runs on the java stack.
    Regards,
    Rich Heilman

Maybe you are looking for