Is it possible to refresh the table from a Materialized view

Hi,
Is it possible to update the underlying table on which a Materialized view is created when some changes in a Materialized view is done.Is this reverse compatibility possible in Materialized View?
Thanks in Advance,
V.Dennis

If you created the materialized view as UPDATEABLE then changes to it should automatically be relected in the underlying table. If this is not occurring I suggest you check the replication jobs. You probably have a stack of errors in DEFERROR.
Cheers, APC

Similar Messages

Is it possible to refresh the client from serverside in j2ee application

Hello
Is it possible to refreshh the client from server side in j2ee Application server using JMS technology,
If you know about it plz. mail me on [email protected] Or plz. reply me over here.
Thank you

You can either use server push or client pull.
Server push:
Server push the changes to client on every certain time interval.
You can make client to subscribe for JMS topic created on server side. Every certain interval, server needs to publish a message and JMS will distribute all the message to the subscribers (clients)
Client pull:
Each client request/inquiry the changes from server on every certain time interval.
You can't use JMS (you can but you must use P2P (queue), which is not recommended in this case).
You can make the client to post HTTP request to get the latest data from server on every certain time interval.
Alex

Is it Possible to delete the configuration from a Material Variant?

Hi,
Can you delete the configuration from a Material Variant and then reconfigure the part in MM02?

Hi
Once we created variant we can't delete it,
Regards,
srihari

Possible to change the datasource from a business-view to a Sql Command ?

Hello,
When a business view contains a lot of elements it takes a while just to open the report.
We'd like to keep the BV as the dictionnary, but,
once the report design completed,
we'd like to disconnect the business view and replace it by the Sql command which can be seen in the menu option 'show SQL query'.
Is it possible via the RAS sdk ?
Did somebody experience this ?
How to proceed ?
Thanks a lot
Alain

Hi Ted,
I'm thinking opening a Case for this problem of opening reports based on a big BV.
We can't really reduce the BV, since it is the dictionnary and we need the whole thing...
I'm wondering why it is impossible to change the Datasource if the tables and fields underneath are identical.
Is it impossible to change the fields' mapping ?
The other solution, as you suggest, is to create a report from scratch, create a new Datasource with the Sql command format, and rebuild the report... I agree it looks like a big job...
Do you know if it is possible to export the report in XML for instance, change the XML, and then re-import ?
Thanks for your Help.
Alain

Refreshing the Data from a embed view in a view container

Hi everybody
I would like to know how can I do to refresh all data from a View with a view container the problem is:
that I have a window that has a view at the same time this has a view container. The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
The question is:
How do I force the view to refresh all the data or call again the wdDoInit() method?
Thank you for your help

Aida,
Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
1) Goto the Interface Controller of C1 and create a method there lets say doSomething
2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
wdThis.wdGetC1CompInterface().doSomething();
Chintan

Is it possible to "refresh" the INBOX from the Server?

Using POP protocole. My Inbox is corrupted, in that the older emails are missing. I was thinking that if I could 1. Delete the INBOX Folder and INBOX.MSF folders, then somhow "force" a retrieval of all the emails retained on the server I could resolve this issue.
Is it possible to force TB to "re-retrieve" emails?

right click the folder, select properties and then the repair button.

Exporting data from a materialized view in Oracle 10g

Can anybody tell me how to export data to a remote server and import data in that remote server without using ftp utility. Actually I want to export the data from a materialized view to the remote server and import the same in the remote server.
If everything works well, I'll put the exporting and importing in a cronjob.
Please let me know how can I do that if that's possible .
Any reply would be appreciated.
Thanks.

Here is what I'm trying to do.
I created materialized views using multiple base tables in my local server and the base tables got populated using a long process.
Now I want to copy those data alone to some remote server since it doesn't have any base tables in it. For now, the remote server should depends on the localserver's data. I'm going to use the remote server's data for some testing purposes.
I know it is easy to create mat.views in the remote server but it doesn't have I don't want to do that now. I just want to copy the snapshots from my local server to the remote server.
Please let me know how to do that.
Thanks.

Is it able to refresh the table view automaticlly after trigger an event?

Hi expert,
I have one table view and a "Delete" button, each time when the user click the del button, it will delete the row which is selected via a RFC module in the backend, afterwards, I want this table view to be refreshed and read the real data from backend via another function module, is it possible? how could I do it?
Thanks and best regards

Let me do some summarize if my understanding is correct
1. Use a timer as "start" point of a table view, set the "interval" to be 0.05 minute
2. use the condition in the timer with a formula (BOOL(STORE@RETURN_CODE==0)).
3. If I trigger one event in the "table view", for example, a "Delete" event and it will return the result RETURN_CODE = 0 to datastore
4. Afterwards, if the time interval of the timer has been reached, 1st it will evaluate the value of the datastore and decide whether to refresh the table view.
Am I right?
Just as you mentioned before, it is not a perfect solution, as we may still wait for the timer to be triggered after a few seconds.
Thanks for your answer.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to transfer the tables from one file group to another file group in SQL 2008.?

Hello all,
I have few issues regarding the transfer of the tables from one file group to another file group  in SQL 2008 and also How can we  backup
and restore the particular database based on file group level.
Let’s say I have a tables stored within the different FG. such as
Tables
  File group
Dimension tables
Primary
Fact tables
  FG1
FG2…
zzz_tables
  DEFAULT_FG
dim.table1                                                                                                                          DEFAULT_FG
dim.table2                                                                                                                          DEFAULT_FG
Here all I want to transfer the dim.table1 ,dim.table2  from  DEFAULT_FG to the Primary File
group .So is there simple methods for transfer the dim.table1,2  from one FG to another .I have tried somewhat but I couldn’t get the exact way .So if someone have better idea please share your knowledge that would be really appreciated.
Secondly after moving those dim.table1 ,dim.table2 from DEFAULT_FG to Primary ,All I want to backup and restore the database only containing  the Primary and FG1,FG2… not
a DEFAULT_FG.Is it possible or not.?
Hope to hear from the one who knows better approach for this kind of task .Your simple help will be much appreciated.
Regards,
Anil Maharjan

Well after all my full day research on this topic had paid off, I finally got the solution and am so happy to research on these things. It makes
us feel really happy after all our research and hard work doesn't goes as waste.
Finally I got what I am looking for and want to make sure that I am able to transfer the tables from DEFAULT_FG to another FG without tables
having clustered index on that tables .
With the help of the link below I finally got my solution where Roberto’s coded store procedure simply works for this.
Really thanks to him for his great post and thanks to all for your response and your valuable time.
http://gallery.technet.microsoft.com/scriptcenter/c1da9334-2885-468c-a374-775da60f256f
Regards,
Anil Maharjan

Is it possible to Extract the Data from Website?

Dear Experts,
Is it possible to Extract the Data from Website and Upload it in the SAP Table?.It is very Urgent.Please help me.
Thanks & Regards,
Ashok.

Hi Friend,
Generaly if it is one time activity you can do it manually by copy paste in excel.
But if it is weekly or monthly activity then you have to ask website provide to provide data in excel or CSV file and upload it into SAP.
I have a situtation like this, and they (Rapaport price) provide it in CSV format with defined columns.
So it is better to raise the issue to website provider.
Regards
Krishnendu

Is it possible to import the total from one worksheet to appear in a cell in another worksheet?

Is it possible to import the total from one worksheet into another separate worksheet?

In Numbers terminology a File (of document) contains sheets. Sheets contain tables, and graphic elements (circles, text, lines, charts, etc.).
So...
if you are asking if you can reference a cell of a table in another table in the same sheet: yes
if you are asking if you can reference a cell of a table in another sheet: yes
if you are asking if you can reference a cell of a table in another sheet of another document: no

Is it possible to retrieve the data from maintainance view?

Hi experts,
Am facing one problem.
Is it possible to retrieve the data from Maintainance View ,If yes how?
IF it is not possible then Y?
While am trying to retrieve data from maintainance view it's showing message like
"it is not a database view or table".
Can u pls give me ans.
Thanks&Regards,
Arun.

Hi Arun,
It is not possible to retrieve the data from Maintenance view. Maintenance View is different and Database View is different.
Maintenance view : Maintenance view permits you to maintain the data of an application object together.The data is automatically distributed in the underlying database tables.
A standardized table maintenance transaction is provided (SM30), permitting you to maintain the data from the base tables of a maintenance view together.
In other words, Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Database View: Data about an application object is often distributed on several database tables. A database view provides an application-specific view on such distributed data.A database view is automatically created in the underlying database when it is activated.Database views implement an inner join.If the database view only contains a single table, the maintenance status can be used to determine if data records can also be inserted with the view. If the database view contains more than one table, you can only read the data.
Database views should be created if want to select logically connected data from different tables simultaneously. Selection with a database view is generally faster than access to individual tables. When selecting with views, you should also ensure that there are suitable indexes on the tables contained in the view.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

Is it possible to delete the table of contents in a pdf but keep the bookmarks?

Is it possible to delete the table of contents in a pdf but keep the bookmarks?

If the TOC is located on certain pages, you can simply delete those (from the Pages panel).
Make sure it doesn't screw up with how your bookmarks work, though...

Is it possible to extract the DN from a certificate?

Is it possible to extract the DN from a certificate?
During the SSL Handshaking process, does ORACLE read the certificate, write the certificate properties to some V$ table or enviroment variable?

There is no problem yet. I just want to know ORACLE's capablities.
I want know at any time does ORACLE record/store/save/etc the properties of a client's digital certificate. I want to use the DN from the certificate to login to an APEX application. Then use the DN as a parameter to call a WebService.
Your thoughts!!!

Is it possible to refresh the table from a Materialized view

Similar Messages

Maybe you are looking for