Is it possible to retrieve data using RFC alone with out using BAPI ?

Hi ,
Is it possible to connect SAP to Non-SAP systems to retrieve data using RFC alone with out using BAPI ?
thanks
Rama

Hello Nelson,
Could you please explain how this can be done. Because my understanding is that only BAPI can be used to connect Non SAP and SAP system not RFC function module.
Regards
Farzan

Similar Messages

Can i use 2D API with out using JRE.

hi,
can i use 2d API with out using JRE 1.3 .
please reply
ravi

Yes, it was (still is?) supported in Java 1.2 - but no
earlier.How is it done.can u please give some sample code.
Thanks and regards,
Ravikumar

Difference Ref cursor with/with out using clause

Hi everyone,
When I am using dynamic sql with USING clause ,the results are not sorted in Ascending order.
DECLARE
TYPE emp_refcursor IS REF CURSOR;
emp_rc emp_refcursor;
TYPE v_emp_id IS TABLE OF number INDEX BY PLS_INTEGER;
TYPE v_last_name IS TABLE OF varchar2(50) INDEX BY binary_integer;
V_empno v_emp_id;
v_ename v_last_name;
p_deptno number := &U_DEPTNO;
v_limit number := 10;
v_ordcolumn varchar2(20) := 'employee_id';
v_stmt varchar2(1000);
BEGIN
v_stmt :=
'select employee_id,last_name from employees
where department_id = :x order by :y ';
dbms_output.put_line(v_stmt);
OPEN emp_rc FOR v_stmt USING p_deptno,v_ordcolumn;
LOOP
FETCH emp_rc BULK COLLECT INTO v_empno,v_ename LIMIT v_limit;
EXIT WHEN v_empno.count = 0;
FOR I IN v_empno.first .. v_empno.last
LOOP
dbms_output.put_line(v_empno(i)||' '||v_ename(i));
END LOOP;
END LOOP;
END;
When I use dynamic sql with out USING cluase,results are sorted in Ascending order.
DECLARE
TYPE emp_refcursor IS REF CURSOR;
emp_rc emp_refcursor;
TYPE v_emp_id IS TABLE OF number INDEX BY PLS_INTEGER;
TYPE v_last_name IS TABLE OF varchar2(50) INDEX BY binary_integer;
V_empno v_emp_id;
v_ename v_last_name;
p_deptno number := &U_DEPTNO;
v_limit number := 10;
v_ordcolumn varchar2(20) := 'employee_id';
v_stmt varchar2(1000);
BEGIN
v_stmt :=
'select employee_id,last_name from employees
where department_id = '||p_deptno ||
' order by '||v_ordcolumn;
dbms_output.put_line(v_stmt);
OPEN emp_rc FOR v_stmt;
LOOP
FETCH emp_rc BULK COLLECT INTO v_empno,v_ename LIMIT v_limit;
EXIT WHEN v_empno.count = 0;
FOR I IN v_empno.first .. v_empno.last
LOOP
dbms_output.put_line(v_empno(i)||' '||v_ename(i));
END LOOP;
END LOOP;
END;
P.S :---- department_id (used) = 50;
Please can some one explain why this is happening like this.
Thanks
Raghu
--------------------------------------------------------------------------------

Hi sundar,
I am new to oracle and learning/trying to get the same output by using differnt methods,rather than using FOR LOOP ,I tried to use ref cursor with dynamic sql.I am in a belief that ref cursor's with dynamic sql are faster than FOR LOOP,irrespective of the size of data.Can you correct me if I am wrong.
Coming back to ur reply,how should my statement look like,when using ref cursor
with USING claus to sort data by asc/desc order.
Thanks in advance
Raghu

Is it possible to retrieve data from an Oracle db with an LDAP query?

Our application uses an LDAP query to retrieve data from Microsoft Active Directory. Is it also possible to retrieve data from an Oracle database with an LDAP query?

if you have Oracle Internet Directory, you will retrieve with ldapsearch data, which are physically stored in the database. But to select * from emp where ename='SCOTT', it is probably not possible.
At least I have never heard of such a product which translate ldap query in sql query. But feel free to write your own one in perl :-)

Adding data file with out using brtools /sapdba

Hi all,
How to add data file to table spaces with out using brtools /sapdba.Please let meknow.
Satya.

why would you do that? whats your requirement?
You can use sql commands (I prefer doing it via brtools),
example
alter tablespace <name of the tablespace> add datafile '<path of the datafile>' size <size in Mb>M autoextend <on/off> next <size> maxsize <size>;
regards
Juan

Is it possible to call custom designed RFC function module, apart from BAPI

Hi Friends,
1. Is it possible to call custom designed RFC function module, apart from BAPI.
2. Why we call it Adaptive RFC layer, Since every time the JCO layer updated with SAP, Why cant be dynamic.
Thanx for Ur time.
Cheers,
Sam

Also check <a href="http://help.sap.com/saphelp_nw04/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm">here</a> for more information on aRFC. Here you can find why it is called adaptive.
Regards,
Christophe

Is it possible to transfer music between iPhones and iPods with out using iTunes

Is it possible to transfer music between iPhones and iPods with out using iTunes

Nope. Both require iTunes on a computer to sync music from.
Unless the iPod is an iPod Touch and the music was bought from iTunes. In which case the Touch can simply go to the iTunes App, under Purchased and download the purchased songs for free.

I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi ‏51 KB
Binning example.png ‏12 KB

Selecting records from DB table with out using internal tables

hi,
i need to retrieve values from a database table based on few fields and date as well. however, i need to check whether the date is less or equal to the current date and along with that i should get the appropriate record. how can i do that with out using internal table.
field1-----date---
11111----
20070219
11111--20070214 <---
11111----
20070205
in the above scenario i should get the second record
Regards,
Kranthi.

Try:
REPORT ztest MESSAGE-ID 00.
TABLES bkpf.
SELECT * FROM bkpf
UP TO 1 ROWS
WHERE budat <= sy-datum
ORDER BY budat DESCENDING.
ENDSELECT.
Rob

Async-Sync scenario with out using BPM

Hi All,
With SP19 we can implement File-RFC-File scenario with out using BPM.
But can any one suggest how can I implement the following File-RFC-File scenario without using BPM.
My input file has five elements. A1,A2,A3,A4,A5
The RFC (BAPI) needs A2 and A3 as input and it produces the output R6.
Now in the destination I need to populate D1,D2,D3,D4,D5,D6.
D1 has to be mapped from A1 and so on till fifth element. D6 will be mapped from R6. In order to achieve this we need to store the value of source interface before calling the RFC so that when we get the response back we can populate the entire destination structure.
Can anyone advise how to go about it. I don't want to use a BPM here.
Thanks
Abinash

Hi
the following thread may help you
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
File - RFC - File without a BPM - Possible from SP 19.
Thanks,
Ram

BDC PROGRAM WITH OUT USING A FM?

Hi Experts,
I need wirte a BDC program for tcode PA30.
i did the screen recording part using tcode-shdb.
i need to use field i recorded as input fields.
Now the main part is how to write code? with out using a class/method?
class/method which i earlier used is class : CL_GUI_FRONTEND_SERVICES.
                                                         method: gui_upload.
am not using ny flat file/xml file to upload?
are there any function modules which i can use?
and how to write code with out using FM?
if any can solve my issue would be very helpful...plz provide code...which would be more helpful.
Thanks in Adv.
Krrish.

Hi,
   If you are migrating employee data, I would suggest you to do it through PA40 transaction rather PA30. systematic screen validations it will go through. If you dont want to use any FM and wanted to do using recording pls find the below code which will update the employee data through PA40 with call transaction method.
SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE   text-001.
PARAMETERS: p_plan TYPE ibipparms-path OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK b1.
TYPES: BEGIN OF ty_error,
         pernr TYPE persno,       " Personnel number
         rel_obj_id(12),         " Related Object ID
         msg(200) TYPE c,       " To store Message
       END   OF ty_error.
DATA: i_tplan TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
      i_intern TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
      i_error    TYPE ty_error OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF w_pa000,
       pernr TYPE persno,
       begda TYPE begda,
      END OF w_pa000.
DATA: wa_plan LIKE i_plan,
      wa_messtab    TYPE bdcmsgcoll, " Messages
      wa_error      TYPE ty_error. " Errors
DATA: it_pa000 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
      it_pa002 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
      it_pa001 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE.
DATA: g_mode LIKE ctu_params-dismode VALUE 'N',
       g_file TYPE ibipparms-path.
ALV field catalog
DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
      Batchinputdata of single transaction
DATA:   i_bdcdata LIKE bdcdata    OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   i_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
      error session opened (' ' or 'X')
Table to hold the return messages
DATA: BEGIN OF i_errmsg OCCURS 10.
        INCLUDE STRUCTURE bapiret2.
DATA: END OF i_errmsg.
ALV List header table
DATA : i_header1 TYPE slis_t_listheader.
ALV List header table
DATA : i_header TYPE slis_listheader.
***ALV Events
DATA: is_layout TYPE slis_layout_alv.
DATA : it_event TYPE slis_alv_event.
DATA : it_event1 TYPE slis_t_event.
To get the F4 help for file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_plan.
PERFORM get_filename.
START OF SELECTION
START-OF-SELECTION.
Initialise data
PERFORM initialise_events.
Retrieve data from Excel file
PERFORM retreive_data.
Populate final data into an internal table
PERFORM populate_data.
Process the excel file data to create a record for IT0007
PERFORM process_data.
END OF SELECTION
END-OF-SELECTION.
PERFORM final_output.
*&      Form GET_FILENAME
FORM get_filename .
*Function module used for F4 help
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_plan.
ENDFORM.                    " GET_FILENAME
*&      Form INITIALISE_EVENTS
FORM initialise_events .
i_header-typ = 'H'.
i_header-key = 'R'.
i_header-info = 'BDC Interface for PA Infotypes 0000,0001,0002'.
APPEND i_header TO i_header1.
CLEAR i_header.
i_header-typ = 'S'.
i_header-info = 'Hiring, Org.Assignment, Personnel Data'.
APPEND i_header TO i_header1.
CLEAR i_header.
***Events and form name
it_event-name = 'TOP_OF_PAGE'.
it_event-form = 'TOP_OF_PAGE'.
APPEND it_event TO it_event1.
ENDFORM.                    " INITIALISE_EVENTS
*&      Form RETREIVE_DATA
FORM retreive_data .
PERFORM upload_data.
ENDFORM.                    " RETREIVE_DATA
*&      Form UPLOAD_DATA
FORM upload_data .
FM to upload data from excel sheet to internal table
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_plan
      i_begin_col             = g_colbeg
      i_begin_row             = g_rowbeg
      i_end_col               = g_colend
      i_end_row               = g_rowend
    TABLES
      intern                  = i_tplan
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " UPLOAD_DATA
*&      Form POPULATE_DATA
FORM populate_data .
processing the internal table generated from the function module
Passing data from Excel file to internal table
CLEAR: g_cnt_processed,
         g_cnt_err_processed,
         i_intern,
         i_plan.
LOOP AT i_tplan.
    AT NEW row.
      CLEAR i_plan.
    ENDAT.
    CASE i_tplan-col.
Begin Date
      WHEN '0001'.
        i_plan-pernr = i_tplan-value.
End Date
      WHEN '0002'.
        i_plan-begda = i_tplan-value.
      WHEN '0003'.
        i_plan-massg = i_tplan-value.
Sign
      WHEN '0004'.
        i_plan-plans = i_tplan-value.
      WHEN '0005'.
        i_plan-werks = i_tplan-value.
      WHEN '0006'.
        i_plan-persg = i_tplan-value.
      WHEN '0007'.
        i_plan-persk = i_tplan-value.
      WHEN '0008'.
        i_plan-anrex = i_tplan-value.
      WHEN '0009'.
        i_plan-nachn = i_tplan-value.
      WHEN '0010'.
        i_plan-vorna = i_tplan-value.
      WHEN '0011'.
        i_plan-gesch = i_tplan-value.
      WHEN '0012'.
        i_plan-gbdat = i_tplan-value.
      WHEN '0013'.
        i_plan-fatxt = i_tplan-value.
      WHEN '0014'.
        i_plan-famdt = i_tplan-value.
      WHEN '0015'.
        i_plan-gblnd = i_tplan-value.
      WHEN '0016'.
        i_plan-anzkd = i_tplan-value.
      WHEN '0017'.
        i_plan-natio = i_tplan-value.
      WHEN '0018'.
        i_plan-btrtl = i_tplan-value.
      WHEN '0019'.
        i_plan-gsber = i_tplan-value.
      WHEN '0020'.
        i_plan-abkrs = i_tplan-value.
    ENDCASE.
Appending the internal table tb_data, tb_chng
    AT END OF row.
      APPEND i_plan.
      IF i_plan IS INITIAL.
        g_cnt_err_processed = g_cnt_err_processed + 1.
      ENDIF.
    ENDAT.
ENDLOOP.
To get the total number of records processed
DESCRIBE TABLE i_plan LINES g_lines.
g_cnt_processed = g_cnt_err_processed + g_lines.
CLEAR g_lines.
ENDFORM.                    " POPULATE_DATA
*&      Form PROCESS_DATA
FORM process_data .
CLEAR wa_error.
REFRESH i_bdcdata.
Check if the employee numbers from the template has already been hired
SELECT pernr
         begda
         FROM pa0000
         INTO TABLE it_pa000
         FOR ALL ENTRIES IN i_plan
         WHERE pernr = i_plan-pernr
           AND massn = 'ZA'.
IF sy-subrc = 0.
    SORT it_pa000 BY pernr.
Check if employee has a corresponding infotype 0001 record
    SELECT pernr
           begda
           FROM pa0001
           INTO TABLE it_pa001
           FOR ALL ENTRIES IN it_pa000
           WHERE pernr = it_pa000-pernr AND
                 begda = it_pa000-begda.
    IF sy-subrc = 0.
      SORT it_pa001 BY pernr.
Check if employee has a corresponding infotype 0002 record
      SELECT pernr
           begda
           FROM pa0001
           INTO TABLE it_pa002
           FOR ALL ENTRIES IN it_pa001
           WHERE pernr = it_pa001-pernr AND
                 begda = it_pa001-begda.
      IF sy-subrc = 0.
        SORT it_pa002 BY pernr.
      ENDIF.
    ENDIF.
ENDIF.
LOOP AT i_plan.
    REFRESH i_bdcdata.
***your recording to be pasted here***
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'P0006-BEGDA'.
    PERFORM call_transaction.
    APPEND wa_error TO i_error.
    REFRESH: i_bdcdata, i_messtab.
    CLEAR: wa_error, i_error.
ENDLOOP.
ENDFORM.                    " PROCESS_DATA
*&      Form BDC_DYNPRO
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro   = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
ENDFORM.                    "BDC_DYNPRO
*&      Form BDC_FIELD
FORM bdc_field USING fnam fval.
IF fval <> nodata.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
ENDIF.
ENDFORM.                    "bdc_field
*&      Form ERROR_RECORD_DATA
FORM error_record_data .
CLEAR: g_lines,
       wa_messtab,
       g_msg.
DESCRIBE TABLE i_messtab LINES g_lines.
READ TABLE i_messtab INTO wa_messtab INDEX g_lines.
IF sy-subrc = 0.
    CLEAR g_msg.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = wa_messtab-msgid
        lang      = sy-langu
        no        = wa_messtab-msgnr
        v1        = wa_messtab-msgv1
        v2        = wa_messtab-msgv2
        v3        = wa_messtab-msgv3
        v4        = wa_messtab-msgv4
      IMPORTING
        msg       = g_msg
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
   IF wa_messtab-msgtyp = 'E'.
    IF wa_messtab-msgtyp = 'S' AND wa_messtab-msgnr = '102' AND wa_messtab-msgid = 'PG'.
      wa_error-pernr = i_plan-pernr.
      wa_error-rel_obj_id = 'S'.
      wa_error-msg = 'Personnel Number Created Successfully'.
    ELSE.
      wa_error-pernr = i_plan-pernr.
      wa_error-rel_obj_id = 'E'.
      wa_error-msg = g_msg.
    ENDIF.
   APPEND wa_error TO i_error.
   CLEAR i_error.
ENDIF.
ENDFORM.                    " ERROR_RECORD_DATA
*&      Form FINAL_OUTPUT
FORM final_output .
CLEAR g_lines.
SORT i_error.
*************added*********************************************
loop at i_error into wa_error.
    if wa_error-MSG eq 'No batch input data for screen MP000600 2000'.
      wa_error-rel_obj_id = 'S'.
      wa_error-MSG = 'Record Created Successfully'.
      modify i_error from wa_error.
    endif.
endloop.
loop at i_error into wa_error.
    if wa_error-rel_obj_id = 'S'.
      g_cnt_success = g_cnt_success + 1.       " Append success count
    elseif wa_error-rel_obj_id = 'E'.
      g_cnt_failure = g_cnt_failure + 1.       " Append error count
    endif.
endloop.
***Field catalog
PERFORM field_cat.
***Assigning Program name
g_repid = sy-repid.
SORT i_error.
***Display Output
IF NOT it_final[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program       = g_repid
           i_callback_user_command = 'USER_COMMAND'
           i_callback_pf_status_set = 'PF_STATUS_SET'
            i_save                   = 'A'
            it_events                = it_event1
            is_layout                = is_layout
            it_fieldcat              = i_fieldcat[]
       TABLES
            t_outtab                 = i_error[].
ELSE.
   MESSAGE i015(zv_msg) WITH 'No Data Found for this selection'.
   LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM.                    " FINAL_OUTPUT
*&      Form top_of_page
      text
FORM top_of_page.
***FM for Displaying Heading
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_header1[]
      i_logo             = 'ENJOYSAP_LOGO'.
ENDFORM.                    "top_of_page
*&      Form FIELD_CAT
FORM field_cat .
ENDFORM.                    " FIELD_CAT
*&      Form CALL_TRANSACTION
FORM call_transaction .
CALL TRANSACTION 'PA40' USING i_bdcdata
                               MODE g_mode
                               UPDATE 'S'
                               MESSAGES INTO i_messtab.
If call transaction successful
IF sy-subrc = 0.
   g_cnt_success = g_cnt_success + 1.       " Append success count "changed
    PERFORM error_record_data. " Populate all data
If call transaction not successful
ELSE.
    PERFORM error_record_data. " Populate all table
   g_cnt_failure = g_cnt_failure + 1.       " Append error count "changed
ENDIF.
ENDFORM.                    " CALL_TRANSACTION

Accessing BAPI's using JAVA with out using webdynpro URGENT

hi Experts,
What is the procedure for calling RFC/BAPI's using JAVA with out using the webdynpro. Please let me know what are the possibilities with step by step implementation.
Regards
Vijay

Hi Boris Rubarth,
Thaks for relavant information.
I have kind of the requirement. The clinet is asking for connecting the SAP RFC using java application. The build Jar or .war or .Ear for which are going to develop should be compatible for running on any of the Applications server like they have Tom cat, weblogic, websphere server.
so the .jar for or .ear file which we are going to develop should be able to run accessing the RFC/ BAPIs from any of these servers other than SAP WAS that is what their target.
Please give me your suggestion, which is better approach. currently their SAP system is 4.6c . So presently it is not possible the webservice approach. But they have plans to go for upgrade to ECC6.0
In that case only JCO option is possible. If use this option . Is it possible to access application which is deployed irrespective of the WAS by doing the required configuration.
Basically i am aware of the ABAP webservice work bech steps and also the JAVA coding also.
Please suggest me what is the better way to achieve this.
Regards

With out using IDX2.....in file to idoc scenario

Hi Masters,
                   i have one doubt .. Can i send normal file from sender system to sap system in the form of idoc.. with out using IDX2...
if it is possible then plz explain me about the steps .. and also explain me wht is the actual use of IDX2 .. as wel as IDX1,,
if u say in IDX2 we have to load the metadata of the idoc .. then we already uploaded the structure of the idoc in XI system ... then why we are using again IDX2 to load the metadata. i have full confusion now .. plz explain me in details ..
          hoping for quick response ..
               Thanks in advance ,
                   jp.

Hi,
You can send an idoc to SAP system through XI without using IDX2. When u send an Idoc through XI, the metadata will be automatically loaded in Idx2.
IDX1 is used for creating a port in XI for Idoc. This port will be responsible for loading the metadata.
Also have a look at this:
Importance of IDX1
Regards,
Divija.

With out using pivot function need a Query

Hi
I am having table which has 7 columns
data in table:
ID,Region,area, year-month, sales_target, actual_sales,
1, abc,    xyz,   200907,       1000,          500
2, abc,    pqr,   200908,       2000,         1500
3, mnr,   xyz,   200907,       3000,          2000
I need the data in year and month with out using pivot funtion
intial
region, area,    jul,   aug, sep, oct .......jun
abc,     xyz,    1000,0,     0,    0...         0
actual
region, area,    jul,   aug, sep, oct .......jun
abc,     xyz,    500,   0,     0,    0...         0Thanks

Here it is
with d as ( select 1 ID, 'abc' Region, 'xyz' area, 200907 yearmonth, 1000 sales_target, 500 actual_sales from dual
union all   select 2, 'abc',    'pqr',   200908,       2000,         1500 from dual
union all   select 3, 'mnr',   'xyz',   200907,       3000,          2000 from dual
select region, area,
max(case extract(month from to_date(yearmonth,'yyyymm')) when 7 then sales_target
else 0 end ) TGT_JUL
max(case extract(month from to_date(yearmonth,'yyyymm')) WHEN 8 then sales_target
else 0 end ) TGT_AUG
max(case extract(month from to_date(yearmonth,'yyyymm')) WHEN 9 then sales_target
else 0 end ) TGT_SEP
from d
group by region, area
REG ARE    TGT_JUL    TGT_AUG    TGT_SEP
abc pqr          0       2000          0
mnr xyz       3000          0          0
abc xyz       1000          0          0You can copy and replicate the results for another one - actual_sales.

How to get the line in the template (smartform) with out using under score

Hi,
     How to get the line in the template (smartform) with out using under score,
     and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
     Please provide the valueble answer as early as possible.
Thanks,
Ravi

Hi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar

Is it possible to retrieve data using RFC alone with out using BAPI ?

Similar Messages

Maybe you are looking for