Is it possible to save or export an e-book chapter from Adobe Digital Editions? Is it possible to export or save from Adobe Digital Editions to an Adobe pdf?
Is it possible to save or export an e-book chapter from Adobe Digital Editions? Is it possible to export or save from Adobe Digital Editions to an Adobe pdf?
I hope you won't see this as rude, but what you are missing is the obvious point that Adobe are in business to make money. So they put as little in Adobe Reader as they can, so people are motivated to buy stuff. Every development intended for Reader has severe limitations on feasibility and techniques for this reason; it's a huge (but very common) mistake to just develop for Acrobat and assume Reader will follow.
Similar Messages
-
Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
== This happened ==
Every time Firefox opened
== possibly when the most recent updates were installed, a few days agoThanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source. -
Hi thee. As logical as I can be. I export a file back into my folder as a PSD. I then export that file to PS. Work on it, save and return it to LR. The file goes to the bottom of the folder from where I have to put it back in the original place, taking time and driving me slightly mad. Why does the file not go back to where it came from please? Thanks Tim
Umm, but this folder is an amalgam of two cameras and five cards, and I want them in capture order! Thanks for trying though Jim.
Cheers
Tim -
Is it possible to save keynotes on a central place so that multople users on mac/ipad.iphon can always have the latest version and edit this ?
If you mean saving the project files; iCloud, Dropbox, Skydrive will do this.
If you mean the application, then definitely not possible. -
How can I remove my name from being associated with the GB file I export?
I am using Garage Band '11, 6.0.5.
I am editing an audio recording for a friend.
When I exported the edited recording, it had my name associated with the file as the artist, album, etc.
I searched and found "My info" (in "Preferences") and deleted my information from ALL name, album, artist fields, but it still exported the file with my name as the artist (but it did not list it as from my album this time)?
Does anyone know how/where/what I need to do to remove all references of my name associated with this file I'm editing?
And also, can I change who is associated with a GB file, from file to file (i.e. if editing my audio, use my name & info, if editing for a friend or colleague, theirs? or is the name associated with my GB account universally embedded into every file, no matter if I want it to be mine or not)?
Thank you for your support!
JoeWhen I exported the edited recording, it had my name associated with the file as the artist, album, etc.
The problem is, that this information is stored with the GarageBand project, when you first create the project. You have to edit the Preferences, before you create the project.
If the project already exists, you can change this option by turning the project into a podcast. Add a Podcast track (Track menu, Show Podcast Track), select the podcast track, and open the Info panel. Then edit the artist field in the Info panel, before you save the song to disk.
(added: I saw the workaround with the Podcast track first in a post by Edgar). -
FAQ: How do I migrate my saved presets from an earlier version of Photoshop or import/export them?
You now have the option to migrate presets from a previous version, export presets and to save to a directory as a zip file (great for instructors).
Preset Migration migrates your saved presets, not your preferences. The message says "Would you like to migrate presets from the following versions?" It simply carries on the preset files you have already saved (things like Brush Tips, HDR Toning presets, Curve presets, Styles etc.) to CS6.
HOW TO USE PHOTOSHOP CS6 AUTOMATED PRESET MIGRATION
Photoshop CS6 offers the great new functionality of automated preset migration for your custom presets from Photoshop versions as far back as CS3.
When Photoshop CS6 launches for the first time, it checks for previous installations of Photoshop on the computer to see if there are custom presets that need to be migrated. Photoshop looks in each of these presets folders for your saved custom preset files that it can migrate.
Preset migration script copies all the files in user preset folders of older versions. If there are more than one preset files with the same name, presets from the newer version will be given priority. These types of presets will be migrated by the script:
3DLUTs, Actions, Black and White, Brushes, Channel Mixer, Color Books, Color Swatches, Contours, Curves, Custom Shapes, Deco, Duotones, Exposure, Flash 3D, Gradients, HDR Toning, Hue and Saturation, Levels, Lighting Effects, Lights, Materials, Meshes, Optimized Colors, Optimized Output Settings, Optimized Settings, Patterns, Render Settings, Repousse, Scripts, Styles, Tools, Video, Volumes, Widgets, Zoomify, and Workspaces
If this is not your first launch and you would like Photoshop to look for presets,
Choose Edit > Presets > Migrate Presets
When Photoshop notices that you have custom presets saved in their appropriate folders it will give the message "Would you like to migrate presets from the following versions?"
Choose Yes. Photoshop will begin the preset migration script.
When the migration has completed Photoshop will pop up another message saying:
"Preset files from older versions successfully migrated"
In order to use your newly migrated presets, you must restart Photoshop.
If you had Photoshop CS6 beta installed and have saved custom presets, you will need to export those presets before uninstalling the previous version and installing the release version of Photoshop CS6.
HOW TO SAVE PRESETS
For PS, check that you have saved all your presets using:
Edit>Preset Manager... (in previous versions) Edit>Presets>Preset Manager... (in CS6)
HOW TO IMPORT AND EXPORT PRESETS
In the main PS menu,
Choose Edit > Presets > Export/Import Presets
In this dialog you can export the presets and then import them when you load the new version using the same Export/Import dialog.
If you have gone through the automated preset migration and notice that some of your presets didn't get migrated with the rest, make sure you have exported your presets to their default folders.
PRESET FILE LOCATIONS:
(Note that there are two different folder locations for presets, one for application provided default presets, and one for user created preset files)
These are the presets that are unique to each user on the computer. These can be migrated automatically: (this is the location that the user should save their personal presets in)
Windows: Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS6/Presets
Mac: Users/[Username]/Library/Application Support/Adobe/Adobe Photoshop CS6/Presets
These are the default presets that ship with Photoshop. These presets can be imported but will not copy over using the migrate feature because each version of Photoshop will install defaults for that version.
Windows 64 bit:
[Hard Drive]:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Presets
WindowsXP and Windows7 32 bit:
[Hard Drive]:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Presets
Mac:
[Hard Drive]/Applications/Adobe Photoshop CS6/Presets
Frequently used preset filename extensions:
ABR Brush preset
ACO Swatch preset
ASL Style preset
ATN Action preset
CSH Custom Shape preset
GRD Gradient preset
PAT Pattern preset
SHC Contour preset
Here is a helpful tutorial:
http://tv.adobe.com/watch/learn-photoshop-cs6/preset-migration-and-sharing/Do you have an iPhoto Library from the old machine? If you have then simply open it - there's no importing involved.
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
If you don't have an actual library there is no way to do what you want.
Regards
TD -
Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created".
What's the problem?
Any help in finding a solution is greatly appreciated.
Thank you,Installed AcrobatXI PRO 11.0.09 on seven computers and laptops. Two of them gives an error when you try to save a document in WORD, EXCEL, Power Point, or when exporting to... error: Save failed to process this document. No File was created.
But all good saves in the format of TXT and jpg.
I have uninstalled and restored and re-installed and updated and registry cleaned and removed using the special utility Cleaner Tool for Acrobat, but nothing helps.
On one notebook with Windows 8.1 and Microsoft office 2013, on another laptop with Windows 7 and Microsoft office 2010, the same problem, although there are computers with Windows 7 and Microsoft office 2010 and everything works.
Tell me where to find the problem and how to solve it.
Thank you. -
Adobe Reader X/10 - continued crash problems trying to save PDFs
Dear all,
I wonder if anyone can help me.... I have been having ongoing problems when trying to save PDF documents online while using the downloaded Adobe Reader 10 or X version. It always crashes/freezers when I press the 'save' button in the 'save as' dialogue box. I have to use end program and start all over again.
I use Windows XP (Professional, Service Pack 3) and both Mozilla Firefox 4.0.1 and IE 8 web browsers. I have followed the links suggested to prevent in future after the problem has been reported - I have unstalled and reinstalled Reader a few times now, as well as checked that I have been using the most up to date version of Reader 10 or X. Then reopened everything again thinking it's solved and then crash (ARGH!). Has anyone else had similar issues?
This is most frustrating to say the least, not withstanding the time delays affecting work outputs when the system crashes on the 'save as' dialogue box (after pressing save). I have lost faith in Adobe now ... I used to consider the free download of Reader a great asset, now it is a true annoyance and may or may not work entirely.
Any help or advice would be great, even alternative PDF software.
Many thanks in advance
RuthThe response from 370H55V is correct in theory and in actual fact was very close to the solution, but the response was more cryptic than helpful. I first encountered this yesterday after upgrading users on a Terminal Server from Reader v8 to v9. My first instinct was to upgrade to v10, which I did, but the problem still existed, so I rolled back to v8 and the issue was resolved. Unfortunately however this was not a solution and it was a requirement that we upgraded to at least v9. The error was as described that in IE 8 when a PDF file was opened inside the browser(or embedded as some might say), and you press SAVE (or even sometimes print) within the adobe reader toolbar, IE would flicker and crash on the page and then recover the page, saying this page has been recovered, but no saving would happen. This would happen if protection was turned off in Adobe Reader, and if it was on (default), then pressing SAVE would just make IE freeze as previously reported.
So to understand what was happening, I ran FILEMON and REGMON by SYSINTERNALS. Regmon showed nothing of significance. Filemon showed a lot more. It was getting an access denied error on c:\windows\system32\shell32.dll. There was no reason for this however because the permissions on this file allow all users to read and execute. But then I remembered what shell32.dll does. It brings up the SAVE AS dialog box that allows you select the path of where to save the file – essentially this is calling the shell of explorer.exe.
So this is actually the cause of the crash. When Adobe Reader makes the call to the SAVE AS dialog box – CRASH!!!!! Why???
Well it’s quite simple. The default location that the SAVE AS dialog box starts in is MY Documents and this is where to start looking for the source of the error. To find out were “my documents” is for your session, open REGEDIT and go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
Look for the key: PERSONAL and in it is a REG_SZ containing the path to “my documents” for the current user. This is generally something like C:\documents and settings\<username>\My Documents on Windows XP/2003 and something like C:\Users\<username>\Documents on Win7/ 2008.
Now in our case the setting for this key was U:\ which was a mapped network drive to the path: \\server\username\mydocs. U:\ did exist and the user had full permission to it. So I changed the path on the personal key to C:\documents and settings\<username>\My Documents – the default setting. I went back to IE, opened a PDF document from a website, viewed the file and then pressed SAVE on the adobe toolbar. BINGO BABY!!!! Worked perfectly.
But again this was not a solution because in a network, you need your users to have their “my documents” in their own home drive, which is generally located on a remote share on a server. So I put the PERSONAL setting in the registry back to U:\ and crash back to square one. I then put the path of the U:\ in the key instead of just U: drive, so PERSONAL now had a REG_SZ value of \\server\username\mydocs. Went out to IE again, launched a PDF, pressed SAVE. BINGO BABY!! It worked. So clearly this was a UNC Path resolution issue or something similar, but why did it only happen from v9 of Adobe Reader and whose fault is it – Microsoft or Adobe. Well I suspect both. I suspect that Adobe maybe making a weak Shell call in their code which doesn’t resolve the path properly, and a possible bug in the MS Shell call may be adding to this issue.
Anyway, I did some further testing for some fun. I took permissions away from the user to their “My documents” folder and was also able to replicate the same crash. I set the PERSONAL registry key to a folder that didn’t exist and same crash. So basically if the SAVE AS shell call can’t resolve or access the path as set in the PERSONAL key the you will get this crash.
The way I solved it for the network users, was to set the registry key for PERSONAL to \\server\username\mydocs via Group Policy, also a logon script may also work. Additionally you could use Folder Redirection in Group Policy to set the path for MY Documents on a per user basis. This also was tested and work.
For non-network users check the PERSONAL key and get the path and then find that path and check permissions etc. Replace it with the default location or even point it to a path that you know exists and has full access.
As a final tip, also look at the registry Key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
And find the PERSONAL path. It will be something like %USERPROFILE%\my documents in XP/2003 and %USERPROFILE%\Documents in Win7/2008. This is the default location and if the PERSONAL KEY does not exist in HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders then windows reverts back to the User Shell Folders key to get the path. It is a good idea to check that path in this area as well.
Hope this helps. -
i want to make a schedular probably in Coldfusion or using javascript , which read xml files from a folder ,import in Indesign template then export as a pdf....
I don't think you understand: I want to open Dreamweaver and build a brand new site, then when I am done I want to host the dreamweaver site on the Business Catalyst platform. I dont want to use anything in BC to build the site, I just want to use the hosting platform. I do not want to import a BC site into dreamweaver or anything like that. I just want to use BC the same way I would use godaddy, or uhost or any other hosting provider. Based on your response you said that "of course its possible to build a BC site in Dreamweaver" I dont want to build a BC site, I want to build a Dreamweaver site and host it on the BC platform. Like I said before it doesnt seem like this is possible. As of now we can only build a new site in MUSE and integrate it into BC without using a BC template. Can you understand what I am saying. I DONT WANT TO USE A BC TEMPLATE, I WANT NOTHING TO DO WITH BC WHILE I AM BUILDING THE SITE WITH DREAMWEAVER, JUST LIKE MUSE DOES.
-
how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).
Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.
-
I am making an album with Snapfish and would like to download some of my photos from iphoto to Snapfish, is this possible?
You mean "upload"?
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected. -
how do I save my itunes libabry on my computer and not on an exteernal hard drive, how do I save my itunes libabry on my computer and not on an exteernal hard drive
It is on the internal boot drive by default.
How/why did you change it?
It is on the internal boot drive by default.
How/why did you change it? -
HT1353 I have an iPod Touch and want to transfer apps and games from my Mac. Is it possible? Thanks
I have an iPod Touch and want to transfer apps and games from my Mac. Is it possible? Thanks
thanks againYou can sync iOS apps from your compute's iTunes library to your iPod. An iPod will only run iOS apps/games. It will not run or even sync computer apps/games.
-
When printing photos in iPhoto 9.5.1 with my HP inkjet printer the multitude of colors in the photos are reduced to two, Magenta and Yellow. If the photos are exported to my desktop (MacPro) and printed from Preview, the colors in the prints are fine. How do I get iPhoto to print the colors correctly?
Brad
What settings did you use in the Export Dialogue?
When you go File -> Export you get a tabbed box with various options. In the File Export tab you can choose to scale the pics, or keep them the same size, change or retain the format.
Regards
TD -
In My iphone 5s,i have disabled automatic download from whatsapp app.So whichever images,video i feel is good i download them and then save them to my camera roll section.So i want to know how can i remove the images from cache of my phone which are downloaded and not saved,but they remain in cache.
Even in some apps i have data which i want to remove,but cant find a way to remove them and they are in my cache eating up my memory.Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
Maybe you are looking for
-
InDesign CS5 or 5.5 interactive pdfs - can I create a button for printing?
Hello lovely InDesign experts. I am creating an interactive pdf using CS 5.5 and would like to have a button on each page that, when pushed, opens a print window (so the user can print the page, or range of pages, if they want). I know you can do thi
-
"Error establishing socket" error on JDBC Receiver Channel.
Dear All, Scenario: Soap to JDBC. I m getting error on JDBC Receiver Channel. messages are processed succesfully on ABAP Stack and receiver channel is on below error: ERROR : Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableExcep
-
Oracle 8i enterprise edition - client installation
Hi, I want to connect to an Oracle 8i enterprise edition database. I want to install Oracle client on a windows Vista machine. Should I install any patch after the client installation? Can I connect to Oracle 8i DB using newer version of client softw
-
I cannot print using Mozilla FireFox. It prints blank pages. It prints ok with Internet Explorer
-
Error in Infopackage- retrieve error data
Hello experts, During execution of infopackage to extract data from ECC i had this error : "Error in codepage mapping for source system" read some thread i understand there was some idoc in error therefore i found the problem in BD87 in source system