Is it possible to show total in Crosstab on top?

Hello Everyone,
I am using cross tab on and using Display Totals set in Initial View.
It shows total at the bottom of table, is it possible to show at top?
Thanks,
Rajan

Hi Rajan,
The totals behave the same way you configure it in your Bex Query.
if you set in the properties in the bex query that you want to show the totals on top, design studio will show it on top as well
Hope it helps,
Roman

Similar Messages

  • How to Show Total Calculation in Footer of Table

    Hi everyone, is it possible to show total calculation in footer of table in webdynpro ? For the calculation, I think i can handle it because many thread in forum and weblog discuss it but for show it in footer of table , i can't find.
    Display
    A
    B
    C
    D
    | ____Total | XX |  --> XX shows total calculation for column D
    If this is not possible, how to trick it ? Thank you
    null

    Hi,
    Even i had the same requirement once, but as this is not possible i.e displaying the total as the footeer of the table.
    the other option for this is to hav a seperate table below the main table & then displaying the total in that table.
    You can collect the value of each cell of column D in an integer variable at the time of displaying the data in the table.
    A | B | C | D |
    1
    2
    3
    for(int i = 0;i<node.lenght();i++)
    int tot = wdcontext.element
    now at the end you can create the element of the node & assign this variable "tot" to that element, then add teh element to the node
    Hope it helps you.
    Regards
    Jeet

  • Help me in  'AR Details ' report shows total open invoices by customer

    hi friends,
    please  help me in  'AR Details ' report shows total open invoices by customer and PO number over selected time range.
    any thing related to open invoices please send me as early as possible.
    Thanks,
    Regards,
    Yogesh

    Hi,
    Find the T.code VF05. You will get the list of open billing docs. Its SIS report. Please find whether the SIS is active or not in your system
    Regards,

  • Is it possible to show a 'My Activity' web part on a SharePoint site if 'My Sites' is not available?

    Is it possible to show a 'My Activity' web part on a SharePoint site if 'My Sites' is not available?
    For example, say there's a SharePoint installation dedicated to particular (custom) SharePoint site. The users go to the site to carry out their tasks. There's no 'My Site' set up in this installation (and for other reasons I'm told it's not an option).
    Is it possible to show a web part here that shows the user's recent activity? The built-in web part for this fails with the error 'Invalid URI: The URI is empty', and the details of it appear to say it's looking for the user's My Site to find out what to show:
    SPMicrofeedContext.SetMySiteHostForContext failed System.UriFormatException: Invalid URI: The URI is empty.     at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)     at Microsoft.Office.Server.Microfeed.SPMicrofeedContext.SetMySiteHostForContext()
    So, while I'd be happy to write a web part (or app part) to display the information instead of using the default part, I'm not sure SharePoint is even storing the activity in a way I can access.
    Some pages like the following: http://sharepointmystery.com/2012/07/22/activity-feeds-in-sharepoint-2013/ make me think it won't be possible - it says: 'The major change from 2010 is that all the [activity] content is stored in the user’s personal site, not
    in a common database.'
    Are activity feeds dependent on 'My Sites' or is there a way to access the information when 'My Sites' is not present in the deployment? I can't find a definitive answer in Microsoft's documentation.

    To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
    Interesting question - thanks for that. Until now I didn't realise there was a difference.
    The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
    Many thanks,
        Geoff

  • How to Show total value in the header 2nd page but based on 1st page footer

    How to show total value in header in report builder but i have the total have related with the total in footer.
    Example
    ===============================================
    Page 1
    Empno Ename Sal
    1 Scott 1000
    2 ALlen 2000
    3 Susi 1000
    Total Sal Page 1: 4000
    ===============================================
    Page 2
    Total Sal Page 1: 4000 --> How to get it?????
    Empno Ename Sal
    4 Budi 1000
    5 Roger 200
    6 George 2000
    Total Sal Page 2: 3200
    Please Help..
    Thanks

    hmm .. what i would do is
    - create a placeholder column
    - create a field in the header and one in the footer
    - have the footer field reference the summary column
    - have the header field reference the placeholder column
    - create a fromat trigger on the footer field to
    store the value of the footer into the placeholder column
    so when the report is executed and the footer field is formatted, the format trigger stores the current value of the summary in the placeholder. then the pagebreak occures and the header field is formatted .. printing the value.
    there might actually be an easier way, just reference the two fields to the same summary column and in theory, since there is nothing happening between the time when the footer is formatted and the header is formatted, the values should be the same .. however this is a theory and i have not actually tested this. since reports does all kinds of fancy optimization this might have unexpected results, but it's worth a try.
    thanks,
    ph.

  • Possible to show bottom of scrolling text first when icon is displayed?

    Hi,
    Does anyone know if it is possible to show the bottom of
    scrolling text when the display comes up? For instance, let's say
    you have 20 lines of text in a scrolling display, but it only has
    room for 10. By default, Authorware shows the top 10 lines in the
    scrolled display, not the bottom 10. I want to show the bottom
    10--is this possible?
    Thanks,
    Edwin

    Hi,
    Well, I decided to have the most current information at the
    top of the display. For instance, if it were a chat, the most
    current chat info would be on top instead of on bottom. That fixed
    the problem adequately.
    Edwin

  • Do not show total price of po in pdf print out

    Dear expert,
    i am going to make a print out of po but in po it shows item wise value, but not show total price at the end of item,this problem is
    particularly for this po only. please help to solve this issue

    Please check in table EKPO against fields NETWR, BRTWR - if the net value or gross value in this certain PO are populating or not.
    Regards,
    Ahmad Farhan Khalid

  • Is it possible to show a presentation from the original iPad via wireless on an older projector with no HDMI input?

    is it possible to show a presentation from the original iPad via wireless on an older projector with no HDMI input? If so, what equipment is needed?

    The ipad not support wireless projector yet.
    The workaround is you are using computer that connected wirelessly [needs 2 wireless adapter] / via cable to projector and connected also to the wireless router.
    You are controlling the computer via wireless connected to the router using remote desktop app like splashtop, teamviewer, logmein, vnc, etc. You must set the remote desktop port and app at the computer too as ipad app support.

  • Query that show total discount on A/R Invoice

    Dear all,
    I would like to have query that show summary of each invoice number that show 'Total of discount'  ( 'Total of discount' = total of discount in line item + discount of total invoice ). Data that I would like to show on this query is as follow :
    Invoice No, Invoice Date, Customer Code, Total before discount, 'Total of discount',  Total Amount, Vat amount
    Please kindly suggest the way to get this data.
    Thanks you in advanced.
    Angnam

    Hi Angnam K,
    Try This one...hope this will serve your purpose.
    SELECT  DocEntry, DocNum,   CardCode, CardName, DocDate, [Total Before Discount] , [Totaldiscount]+  [OinvDiscount] as [Total of discount], VatSum [Total Tax]      FROM (
    SELECT T0.DocEntry,T0.[DocNum], T0.[DocDate], T0.[CardCode], T0.[CardName], SUM(T1.[LineTotal])[Total Before Discount],
    SUM(T1.[PriceBefDi] * T1.Quantity *T1.[DiscPrcnt])/100 as [Totaldiscount]
    ,Case When T0.[DiscPrcnt] <> 0 Then  (SUM(T1.[LineTotal])/ T0.[DiscPrcnt]) Else 0 end [OinvDiscount] ,T0.VatSum
    FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
    Group By T0.DocEntry,T0.[DocNum], T0.[DocDate], T0.[CardCode], T0.[CardName], T0.[DiscSum] ,T0.[DiscPrcnt],T0.VatSum )Sales
    thanks,
    Kumar
    Edited by: itskumaramit on Jul 13, 2011 12:43 PM

  • Latest ep of my podcast doesn't show in iTunes. Subscribers CAN download it. Podcast page shows 'Total: 3 items' but lists only items 2 and 3. RSS feed is validated and fine.

    Latest ep of my podcast doesn't show in iTunes store. Subscribers CAN download it. Podcast page shows 'Total: 3 items' but lists only items 2 and 3. RSS feed is validated and fine. How do I get iTunes to display it?

    I've used Feedburner many times and never had such a problem. I am a bit confused, forgive me if I ask for questions already answerd. Have you tried updating the podcast in someone elses copy of iTunes? My guess is that the file is bad since it is working in other programs but not iTunes. I would try making a new .mp4 file and podcasting it and seeing if that works.
    Good luck!
    ~Ben

  • I have recently received a pdf file that, although previously opened, now shows totally blacked out?  What can I do to correct this?

    I have recently received a pdf file that, although previously opened, now shows totally blacked out?  What can I do to correct this?

    Hi rdfnra,
    Please check the Page Display preferences (File > Preferences/Acrobat > Preferences) and make sure that Show Large Images is selected. If sounds as though this PDF may have been created from a scanned document, and this preference is disabled.
    Please let us know how it goes.
    Best,
    Sara

  • Is it possible to show data from two different sql tables?

    Is it possible to show data from two different sql tables? Either to show combined data by using a join on a foreign key or showing a typical master detail view?
    I have one table With data about a house, and another table With URL's to images in the blob. Could these two be combined in the same Gallery?
    Best regards Terje F - Norway

    Hi Terje,
    If you have a unique key, you could use one of the following functions for your scenarios:
    If you only have one image per house, you can use LookUp:
    http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745501
    If you have multiple images per house, you can use Filter:
    http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745487
    Thanks
    Robin

  • Is it possible to show the campaign name in the opportunity page?

    Hi Everyone,
    I'm wondering if its possible to show the campaign name in the opportunity page as a referrence as to which campaign the opportunity as associated with.
    Thanks,
    Wayne

    there is a Source Campaign field on oppty.

  • Is there any possibility to show English interface in Chinese windows-xp?

    I'm using English Windows-XP, but "Language for non-Unicode program" setting has to be set as "Chinese(PRC)" to show Chinese word correctly in my laptop.
    ODI interface in this environment always show in Chinese, but all the manual is in English, so it's difficult for me to make clear which word in ODI interface is the meaning in manual.
    My question is, Is there any possibility to show ODI English interface even "Language for non-Unicode program" setting in my Windows-XP is "Chinese(PRC)"?

    OK, I got the answer.
    set lines below in odiparams.bat in windows and odiparams.sh in unix:
    set ODI_ADDITIONAL_JAVA_OPTIONS="-Duser.language=en" "-Duser.region=US"

  • Is it possible to show Nikons raw files (.nef) in the organizer as thumbnails?

    Hello
    Is it possible to show Nikons raw files (.nef) in the organizer as thumbnails?
    Best regards Dieter

    Yes it is possible, depending on your camera and version of PSE

Maybe you are looking for