Is it possible to sort reminders in the list view?

The reminders, when entered with my iPhone, show up ordered by when I entered them. Is there a way to sort them by the due date? Is this something that will be added later on?

ICal Reminders won't sort on the actual device it was intended for - the Iphone
I just talked to Apple Express service over this problem. I went to the trouble of transferring my to-do list onto icloud Reminders - where each item asked for a priority ranking and where you are then given options for how to sort all the Reminders you entered - so that it can actually be useable as any Calendar/time management system would be. I chose "by priority" of course, but you can also choose alphabetically, etc. It must be said, at least to Apple, apparently, that the point of doing all this is so that the Reminders are available on your actual device - my iphone. The Reminders all synced immediately to the Iphone. However, the Reminders list is an unsorted jumble on my iphone. Even when I tap out a Reminder on my iphone itself and choose a priority, the item remains at the bottom of the list as the last thing I typed in. Apple Express Support "explains" that the priority ranking and the sorting choices are "not supported" on the device you want to use them on - the iphone. They offered me "an article" that explains this in detail. In other words, engaging with the Reminder function and choosing priorities and choosing sort orders is all just a cruel joke wasting your time. I would have been better off just printing off my Reminders list on paper and circling the high priority items in red ink. Oh - but you can't print it out either.
Unbelieveable. Apple's ICal Reminder function actually and actively leads you to engage with completing details and choices that don't even function, or in other words - aren't "supported" on the Apple device they are stated to be designed for. Is there a device on which this function is actually supported? "Not at this time"
The only way to have your to-do list sorted on the iphone is to assign a calendar date for each one of them and then they only appear on that specific date. You would not be able to view your whole list in anything other than the order you happened to enter the items. No calendar/time management system I know of makes you put a date on every item in a task list - some tasks have a due date, but most don't. And every calendar/time management system allows you to sort your list, or view your list in a sorted order. And print it out also.
Apple advertises this Icloud Ical/Reminders system as a time managment tool and fails to tell us that vital functions don't even work on your iphone.

Similar Messages

Is there a way to view completed reminders by the lists view rather than all together date view?

NM

Not directly, as far as I can tell.
You could create a new list, "Completed List", or something, then select all the reminders from the usual "Completed" list, copy (command-c) then paste (command-v) into "Completed List".

Is it possible to sort reminders

I'm excited to have reminders synch overicloud but is it possible to sort reminders by importance? Also it would be great to be able to rate importance directly through the interface rather than having to go to info tab

Both of your questions or statements are not possible at this time. Those are great features indeed, and I strongly encourage you to submit it through apple.com/feedback

GUI Bug Outlook 2013 while sorting E-Mail in the list view in the main window

Hello,
I found a bug in Outlook 2013 - following occures: in main window, when I sort the list view with e-mails by "sent to" or by "received from" and when I delete one mail from this list, the view is not correct, because after the deleted
E-Mail disapears when I go with my mouse Cursor over other e-mails in the list Outlook 2013 shows all mails from the top of the list (beginning in alphabetical or reverse alphabetical order) as I move with mouse over neighbour mails from the corrected view
instead of the same view with only that one item deleted. The scroll element right has the right Position, but after clicking on the arrow up or arrow down within this element it jumps to the start. This has worked in my Outlook 2010 well, and this is very
unpleasant because I can not work well everytime sorting my mails right again after I deleted one. This seems to be only the case if I sort my mails by Name, not if sorted by size or received/sent date, then list view works well. I use Windows 7 Ultimate x64
and Office 2013 x32, on HP6910 with ATI graphics Card. Whole System works fine since years. Is there any log file I can submit? Is my description clear? Please help , thanks.
regards
Bogusz Schubert
PIMPEX Bogusz Schubert
Vohwinkeler Str. 58
42329 Wuppertal
Tel +49 202 4299 2270
Fax +49 202 4299 2271

I made a screenshot of this: after deleting email from a Partner starting with letter "D" Outlook jumped back to the top of the list starting with "1" - you clearly see the wrong Position of the scroll element right and false broken view of the mails
at my mouse Cursor
Picture is under the Domain mt.i24.cc slash outlook2013guibug1.jpg
any help will be much appreciated

Is there a way to sort by description in the list view of bridge?

I am trying to sort a mass amount of PDF files using the description meta tag. Is there away to add that tab in the list view under the content panel, or a way to use another panel to view the details of multiple files at once with description included and be able to sort them that way?

These are the tabs that are displayed and the ones it gives me options for.
There are many improvements needed for Bridge and the default metadata workspace is certainly one of them. In fact, in its current state it is next to useless and no help at all. But you are right, it should provide you with at least the description field but it does not. Oddly enough, the only way to achieve this is using the bottom right icons in the Bridge window. You see three of them, thumbs, large thumb with list and small thumbs with list. Currently you have selected the default small thumbs with list, if you use the middle one (large thumbs with list) and fiddle around with the slider for the size of the thumbs the description field magically appears in view but you are not able to put it in a separate column.
So the find option is still your best option I'm afraid...
You can also try to create your own workspace. Start dragging the borders to change the size of the panels to your comfort so you have a good overview of the panels you want to have in view.
You can also change the order and place of panels in multiple rows but you are limited to max three columns. Place the cursor on a panel tab and start dragging it to a new location. A single blue line means either between a row or a column, a surrounded blue line means add as a tab in same location. You also can drag the tabs for your custom order.
Now with the content panel in reasonable size use the icon bottom right for large thumbs and list view and use the slider for correct position of the description field. Save it as a new workspace (important to retrieve it when messed up). You can also have multiple windows in Bridge (at least on a Mac, you seem to be on Windows) and use one for list view and another for find results. etc. etc.

New (8.0.0) vs. old (7.x.x) sorting of albums in the list view

Hi!
I am having a few little issues with the new classification system in iTunes 8.0.
I have just changed for the first time the album name of a few songs I imported after updating to 8.0. The album name of the CD was starting with "The". After renaming the CD, I have noticed that whenever I try to punch the name of the album directly in the Albums column in the Browser pane of the List view, I can't find it. But, if I strip the "The" from the name of the album, therefore basically punching on my keyboard whatever comes after the "The", I can find it right away. This was not the behavior found in iTunes 7.x, which somehow confuses me now. But, another problem comes up when typing the name of the songs I imported in iTunes 7.x and before. Their album names are still classified as the "The" being part of the Album name. This means that everything I had before upgrading is still behaving as if I was in iTunes 7.x (but in iTunes 8.0), and everything I imported after the update is behaving in the new fashion. I tried renaming a few "old" albums (7.x) in 8.0, and they are now sorted with the new 8.0 style.
I also don't like the new Grid view, as I can't seem to be able to type in to go directly to an album, even when the Album tab is selected. I always end up instead on artists having names similar to the album I'm looking for...
Is there a way to circumvent this new (re)naming "automation"? I like to find my albums the way their name appear on their respective album art...
Anyways, I hope I am the only one being affected by this changing, as I will find myself utterly confused, or will be forced to rename every album starting with "The" I have in my iTunes library which, by the way, seems to be a very popular way of naming albums nowadays!
Thank you, Martin
P.S. Sorry for the double post, I didn't put it in the right section at first...

Hi,
As of now, your authorizations still in 3.x. so please check the below tables.
RSSBAUTHGEN - it holds info provider and authorization object
RSSBAUTHGENERATD - it have user name and info provider
RSSBAUTHTRACE
RSSBAUTHTRUSER
RSSBAUTVAL
RSSAUTHHIER
RSSAUTHHIERNODE
Coming to 7.x , Above mentioned T code kumar is enough to handle authorization concepts.
There is best document about 3.x and 7.x comparison on Google.
please search for it by using search term "An Expert Guide to new SAP BW Security Features"
Written by Marc Bernard
Thanks

Is it possible to have multiple pause the require view to click "continue" button to proceed?

Is it possible to have multiple pauses the require view to click "continue" button to proceed?

1. Turn the video into a symbol.
2. Set stage, symbol and video to not autoplay.
3. Set play in the video playback at the start of the video timeline.
4. Set pause in the video playback at the prefered time on symbol timeline.
Once I convert it to a symbol , the pause funtion is not showing on playback.
5. Zoom in as much as you can on symbol timeline and set trigger "stop all" for the symbol right after the pause playback marking.
6. Set play in the video playback right after the "stop all trigger" marking.
7. Create button with action play symbol.
You can now play a video which will stop at a pre set pause, and make it countinue to run by clicking the play button again.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

How to get items from a list that has more items than the List View Threshold?

I'm using SharePoints object model and I'm trying to get all or a subset of the items from a SharePoint 2010 list which has many more items than the list view threshold (20,000+) using the SPList.GetItems() method. However no matter what I do the SPQueryThrottledException
always seems to be thrown and I get no items back.
I'm sorting based on the ID field, so it is indexed. I've tried setting the RowLimit property on the SPQuery object(had no effect). I tried specifying the RowLimit in the SPQuerys ViewXml property, but that still throws a throttle exception. I tried using the
ContentIterator as defined here:http://msdn.microsoft.com/en-us/library/microsoft.office.server.utilities.contentiterator.aspx,
but that still throws the query throttle exception. I tried specifying the RowLimit parameter in the ProcessListItems functions, as suggested by the first comment here:http://tomvangaever.be/blogv2/2011/05/contentiterator-very-large-lists/,
but it still throws the query throttle exception. I tried using GetDataTable instead, still throws query throttle exception. I can't run this as admin, I can't raise the threshold limit, I can't raise the threshold limit temporarily, I can't override the lists
throttling(i.e. list.EnableThrottling = false;), and I can't override the SPQuery(query.QueryThrottleMode = SPQueryThrottleOption.Override;). Does anyone know how to get items back in this situation or has anyone succesfully beaten the query throttle exception?
Thanks.
My Query:
<OrderBy>
<FieldRef Name='ID' Ascending='TRUE' />
</OrderBy>
<Where>
<Geq><FieldRef Name='ID' /><Value Type='Counter'>0</Value></Geq>
</Where>
My ViewXml:
<View>
<Query>
<OrderBy><FieldRef Name='ID' Ascending='TRUE' /></OrderBy>
<Where>
<Geq><FieldRef Name='ID' /><Value Type='Counter'>0</Value></Geq>
</Where>
</Query>
<RowLimit>2000</RowLimit>
</View>
Thanks again.

I was using code below to work with 700000+ items in the list.
SPWeb oWebsite = SPContext.Current.Web;
SPList oList = oWebsite.Lists["MyList"];
SPQuery oQuery = new SPQuery();
oQuery.RowLimit = 2000;
int intIndex = 1;
do
SPListItemCollection collListItems = oList.GetItems(oQuery);
foreach (SPListItem oListItem in collListItems)
//do something oListItem["Title"].ToString()
oQuery.ListItemCollectionPosition = collListItems.ListItemCollectionPosition;
intIndex++;
} while (oQuery.ListItemCollectionPosition != null);
Oleg
Hi Oleg, thanks for replying.
The problem with the code you have is that your SPQuery object's QueryThrottleMode is set to default. If you run that code as a local admin no throttle limits will be applied, but if you're not admin you will still have the normal throttle limits. In my
situation it won't be run as a local admin so the code you provided won't work. You can simulate my dilemma by setting the QuerryThrottleMode property to SPQueryThrottleOption.Strict, and I'm sure you'll start to get SPQueryThrottledException's
as well on that list of 700000+ items.
Thanks anyway though

Todo tab: Routes displayed when selecting the List View

Hi,
I have a question about the routes that appear on the workspace's "To do" list view, and how to perform validations when they are clicked.
I've created a process that starts with a form being created by a user. Then, it's validated by a sequence of other users. Each one sees a different set of routes. On one of the steps of the process, one of the routes requires the user to input a text.
The condition is checked on the click event of the AWS_SUBMIT button, where I've also put the text request. If the user is using the card view on the "To do" tab and clicks on the item, the form opens and, when the user submits it, all works as expected. However, if he has the list view and clicks once on the item, the route names appear on the bottom right of the workspace, and he's able to select them. As the form hasn't been opened, there's no control on the selected route, and the user is never asked to input the text. On the next step of the process, which depends on this text, the process gets stalled.
Is it possible to hide these routes on the workspace, disable the list view, or stop the submit if it hasn't been started without opening the form? I know you can customize the workspace, would this allow me to remove the route buttons?
The version we are using is LiveCycle ES 8.2.1.3.
Thank you

Is there any way to hide the submit button(green check mark) that appears on the task card when a user saves a form in their draft folder.
Users are bypassing the form validation by submitting a form this way. For instance, a user will fill out the form with values that do not pass validation. They will save the form in their drafts folder. The user will then close the form and navigate to their draft folder. Without opening the form again, they will click the green check box submit button and a form with invalid data will be submitted to the process.
This is LC 8.2.1.3.

Error: List View Threshold. The number of items in this list exceeds the list view threshold, which is 5000 items.

Hi, i had created a SharePoint List in cloud ( office 365) using List Template.
List template contains 12000 items taken as template from SharePoint on Premise.
I am getting this error message, in SharePoint Online (Office 365)
The number of items in this list exceeds the list view threshold, which is 5000 items. Tasks that cause excessive server load (such as those involving all list items) are currently prohibited.
How to resolve it, to get data in my SharePoint list, any help will be appreciated.

With O365 lists over 5k items are now officially supported but they will have limited behaviour due to the threshold. There are no workarounds or options to increase the threshold either temporarily, for specific users or for the list itself as you have
with on-prem.
You'll need to remove enough items to get it below the threshold limit, add indexed columns to support indexed views, then re-add the items again. This article is for 2010 but the section around indexed columns and views is still accurate:
https://technet.microsoft.com/en-us/library/cc262813(v=office.14).aspx
It may be possible to add the indexes on your on-prem list where you can increase/avoid the threshold, then re-export the list. That would rely upon the list creation script adding indexes before it uploads items but it's a logical assumption.

Help ! The 'list view' for the Calendar app. on my Ipod touch is haywire..

The 'list view' seems to be all wonky in Calendar on my iPod touch.
The dates for a given day that's displayed don't make sense:
i.e. Sunday Oct. 27 2030 followed by Saturday July 14 2001 followed by Tuesday Jan. 16 2001 are listed in consecutive order instead of today, tomorrow and next day (with correct dates).
Also, the 'events' given for each day listed don't make sense and are often duplicated.
The 'day' and 'month' views however, seem to be ok and not corrupted. The 'list' field in the month view also seems fine ?
Has anybody experienced this ? Very frustrating, since I like the list view.
I make most of my entries/changes to iCal on our main desktop (iMac 24") then sync. to my iPod. The list view seems ok on the desktop.
Any help greatly appreciated.
ps. not sure if the problem corresponded with an upgrade of the Ipod software to OS 3.1 from 2.x....
ipod touch 16 GB 2nd generation iPhone OS 3.1 iPhone OS 3.1.1 (7C145)

Attach the iPod and launch iTunes.
Select it and goto Info tab / Advanced.
Try using the "replace..." option and sync to see if it places the good data on there.

ICal under 10.5 doesn't print the List view with To Do's correctly.

The problem is this: I have a bunch of To Do's in iCal. I usually print them out on paper using the LIST VIEW (print dialog) so that I can take my To Do list with me. Unfortunately, after updating to Leopard 10.5, all the URL's in my To Do's have wierd links to my email and print funny code on paper now. It's like the added feature of To Do's in mail has caused something here. Anyone else experiencing this? By this way, this only happens with old to do's (before the upgrade), not new ones.

John,
This has happened to me as well. Our school uses phpicalendar to publish lesson plans to our web server. I have had this happen to three other teachers as well. In order to get them back to the correct server I have to export their calendars to the desktop, create a new calendar and publish it to the correct location, then import their calendars from the desktop. I haven't been able to re-enter the correct URL in the existing calendars - get an error when publishing.

How to add custom columns to the list view in Finder

Hi,
I'm looking for a way to view additional file details in the list view in Finder, for example audio bit rate, so I don't have to do "Get Info" for each file separately. I couldn't find a way to add columns other than the ones listed on the view options dialog.
Can anyone help me find a way to do it?
Thanks,
Tal

Have you checked the Help menu for what you want to do? I found this in Apple support - List View Options
Check the AppleScript Forums. There is probably a script that you can use.

Workflow not working if the trigger field isn't in the list view!

I have a list that displays important dates, and I have set up a reminder date column which calculated the reminder date by adding 7 days on to the set date. I then have a workflow that emails out reminder of this task if the reminder date matches today.
I have noticed that if I include the reminder date column in my list view, the workflow works fine. But as soon as I remove the reminder date field from the list view my workflow no longer works. It's obviously quite confusing to other having this reminder
date column there when it is only needed to trigger a workflow, so how do I trigger the workflow without having it on view?
Thanks!

Hi Sarah,
As I understand, you have a Date column for user to set date, then you want a reminder date to add 7days to Date column. Then you would like to trigger a workflow if reminder date matches today.
If you do not want reminder date in the list, you could use the workflow 2013 action Core Actions > Add time to Date, to set a workflow variable to replace reminder date, and compare with today. Then you could omit reminder date column.
If you do want reminder date in the list, please try hide reminder date column in the list and test the issue again.
http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2013/06/03/how-to-hide-a-sharepoint-list-column-from-a-list-form.aspx
Regards,
Rebecca Tu
TechNet Community Support

Is it possible to sort reminders in the list view?

Similar Messages

Maybe you are looking for