Is it possible to sort the catalog codes?

Hi
We use catalogs on notification for object, part, damage etc.
The code is numeric.
But for the user it can be difficult to find the correct code to use, as the list is not sorted.
Is there a way to sort the list of catalog codes on the description field?
Best regards
Tom

Catalog codes are not linked to technical object types but, fundamentally should be linked so as to give more clarity to the thought process. For e.g, you have centrifugal pumps as technical object type, you can have catalog codes for either for this object type or it can me made common for all pumps.
Now for damage, cause, activities and tasks, you can actually maintain the few codes same across catalog profiles. For e.g. pump, gear box, compressors, etc the codes of damage can be 0010-Broken, 0020-Leaked, etc. The only catalog code group, which will change is the object part as it will vary with equipment types.
This will actually help you in running your reports effectively. For e.g. you can look for all failures, which were due to 'Leaked' as the damage.
I hope this helps.
Regards,
Ketul

Similar Messages

  • Is it possible to find the transaction code via table name ??

    Hi
    Can any body please let me know is it possible to find the transaction code via table name ??
    Thanks in advance
    Sesh
    Edited by: seshu_sapfico on Dec 8, 2009 12:21 PM

    Please, specify your requirement... A table could be modified by various programs which are called by numerous transactions.

  • Is it possible to sort the list of Conditions/Calculations?

    Is it possible to sort the list of Conditions/Calculations so that they display alphabetically in the list?
    My list of conditions is getting quite long and haphazard now!
    Cheers
    Sapphie

    I was afraid of that!. It is very disappointing because , as I am developing a set of reports for the first time, I will create conditions/calculations in quite a non-ordered way and then end up wanting to group similar ones together.
    Hopefully a future version will allow this?
    Lee

  • Is it possible to SORT the Login Items on

    Is it possible to SORT the Login Items on
    Apple - System Preferences - System - Accounts - Login Items?
    Useful to load one of them before or after the others.
    Thanks?

    I don't think you can sort them like that but you can achieve this by using apple script.
    for example if you want to launch Mail first and Safari second, paste the following into script editor and save it as an application.
    tell application "Mail" to launch
    tell application Safari to launch
    You can also put a delay between the two:
    tell application "Mail" to launch
    delay 3
    tell application Safari to launch
    this will put a delay of 3 seconds between launches. Now remove Safari and Mail from login items and put the app you made using apple script there instead.

  • Is it possible to sort the songs which have an exclamation by them because they won't play?

    Is it possible to sort the songs which won't play and have an exclamation sign against them.
    I have just upgraded to Windows 7 which may have caused the problem as they played ok before.

    Lost & Found playlists
    Create a playlist called Found, select everything in Music and drag it into the Found playlist. Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist.
    If the files still exist on the computer my FindTracks script may be able to help reconnect iTunes to them.
    tt2

  • Is it possible to sort the Aperture Library by Lens used

    Is it possible to sort the Aperture Library by Lens used? And get statistics on the different Lenses used?
    I'm using latest Aperture.

    I would just add that your Preferences settings have to be set to show the columns you need. Go to Aperture -> Preferences, and select the Metadata tab. in the "List View Columns" field, for whichever set you have chosen with the radio button, choose the set of data from the pulldown list that shows the fields you want. For example, I have the lens model field set in EXIF-Expanded set. I choose that set and those fields will show in the columns in List View.
    Great tips, thanks!

  • Is it possible to see the source code

    is it possible to see the source code when u know the transaction code for the same?

    hi Dhakshu,
    it possible,
    u run the t.code and there go to system-> status, there u can see the prog name for tht t.code, u double click on tht , u get the source code for thr t.code
    \[removed by moderator\]
    regards,
    chandu
    Edited by: Jan Stallkamp on Jun 25, 2008 1:17 PM

  • Is it possible to export the html code from a muse site that I am building?

    Is it possible to export the html code from a muse site that I am building?

    Mac_Heibu has the right idea. When you export your site to HTML, it creates a folder that contains all of your pages. Here's an example of what the folder will contain. All of your HTML pages, all your scripts, CSS, and it'll also have individual folders WITHIN your main folder for your phone or tablet versions, if applicable. This method allows you to upload your files to an FTP host. However, if you're trying to upload it to an FTP, the BETTER option would be to go File > Upload to FTP Host. If this has helped you, please mark mac_heibu's answer as the Correct Answer, and feel free to mark my reply as a Helpful Answer.

  • Is it possible to download the LV code to pda in LabVIEW evaluation version?

    Is it possible to download the LabVIEW code to pda in LabVIEW evaluation version?
    For example: 
    I want to select New » Targets and Devices from the shortcut menu to open the Add Targets and Devices dialog box as shown in the below Figures.
    Is it possible to do the same in evaluation version of LabVIEW 8.0

    Prasada,
    In order to target a PDA device, you will need to have the PDA module installed. Fortunately we do have evaluation software also available for the LabVIEW PDA Module 8.2. Once this has been installed, you should be able to target your PDA device. Please post back if you experience any trouble. Thanks,
    Mike D.
    National Instruments
    Applications Engineer
    Message Edited by Duffman Says: on 11-21-2006 04:59 PM

  • Is it possible to sort the controls and indicators on the front panel?

    Programming events would be much easier in an application with lots of
    controls and indicators, if there where a means to sort and group them.
    Is there any means to do so such that you see a sorted list when choosing the control that triggers an event etc..?

    I am not aware of a way to sort the list of controls (that are listed in the edit events dialog) by name. They seem to be sorted in the order they were created.
    I agree, sorting could be useful for large VIs.
    LabVIEW Champion . Do more with less code and in less time .

  • Is it possible to sort the VPN list?

    I've got 15 different VPNs that I connect to, and I'd like to sort the list that shows in the VPN menu and in the network preferences. Is there any way to do this?

    How wrong some one can be by reading to fast.
    Sorry for the misunderstanding.
    You are writhe, I using a MS Laptop from the company I work for , and YES, I use VPN to log-in the company server. But sorry I don't know how to help you.
    Dimaxum

  • Is it possible to sort the document order in Windows 7 taskbar preview?

    I am using Reader X and open many PDF docs at once.
    When I hover the mouse over the taskbar icon for Adobe Reader the list of all open documents appears, but they do not appear sorted by the document name.
    Is this possible to configure - either in Windows 7 or in Reader?

    Not possible to configure this in Adobe Reader.

  • Is it possible to get the source code of sun package in JDK1.4?

    If i want to review the code of the HTTP protocol handler and some other things.
    how can i get the source. or is it possible?
    thank you.

    See this post if you can figure out something out of it ....
    http://forum.java.sun.com/thread.jsp?forum=31&thread=391451

  • Is it possible to have the time code follow the footage on playback?

    Hey everybody.
    I searched the forums, but I didn't find anything relevant to my question.
    My question is, is it possible to have time code follow your footage on playback?
    For example, when I scrub along the clip, the clip will tell me the entire length at the first thumbnail, but then as I scrub along, there is no time code, so I am unable to know how far along the sequence I am.
    I was talking to a faculty member, and he was told to grab certain portions of the footage, and he is wondering if this is possible within iMovie '09. I know that this feature is available in iMovie '06 and Final Cut Pro (of course), but I just started working with iMovie '09 last week, and wanted to know if this is possible.
    Any help is appreciated, and please let me know if I need to further clarify my question.
    John

    If you click VIEW/SHOW PLAYHEAD INFO, you will see the timecodes as you scrub. (Consumer timecodes, not pro timecodes).
    This works if you imported your footage from a camcorder, either miniDV or AVCHD.
    However, if you have imported an analog file, or saved a DV file to a QuickTime File, you may just see the file creation date in VIEW PLAYHEAD.
    However, there is a trick to getting even these clips to display timecodes if you know the start time.
    First pick a clip. Make a copy and drag it to your desktop, just so you don't lose anything.
    Rename this copy in the following format clip-yyyy-mm-dd hh;mm;ss.current file extension.
    For example, clip-2001-07-14 09;30;45.mov (note the space between the day and the hour)
    This would be a .mov clip that starts with the first frame at July 14, 2001 at 9:30:45 AM
    Then import the clip into iMovie. You now have timecodes at the playhead.

  • Is it possible to sort the order of accounts in Mail?

    I have many email accounts, and when they're synced to my iPhone, they show up in a seemingly random order (not alphabetical, by type, etc).
    Is there any way to sort email accounts on the main Mail screen in a custom order (or simply alphabetically)?
    Thanks!

    There is not. You'd have to delete them and readd them in the order you want.

Maybe you are looking for

  • Major Prolem with 30GB Video!!  Underwater, Instant death.  Help Please?

    I have had a 30GB Video Ipod for about a year now. For the first few months it worked like a charm, but now it is not working at all. I have tried everything i can from FAQ's and other posts on apple.com, but none of the common problems pertain to mi

  • How do I get my bookmarks back after updating to Windows 7?

    I updated to Windows 7 on a new hard drive. I backed up my C:\ drive to a Seagate external hard drive first. After installing Windows & all my programs. I restored the data from my Seagate drive, but I don't have any bookmarks from Firefox. I had ove

  • R12 Bank Accounts Table and cloumns

    When the data from ap_bank_accounts_all table got migrated into R12 instance.What are the tables in which the data got inserted. Like in CE_BANK_ACCOUNTS. Below columns were present in ap_bank_accounts_all ,what are the replacement columns in replace

  • Every single 3rd party App crashes

    Hello, I'm running a 8gb EDGE 2.0.1 iphone. Every single 3rd party app crashes all of a sudden. I tried restore. all native apple apps load, but even when I just synce 1 3rd party app to the iphone (so all native iphone apps and 1 3rd party) that alw

  • Reg: Advantages from 4.6c to ECC 6 in terms of security

    Hi, Here I need inputs about the recommendations on different functionality or the advantages from 4.6c to ECC 6 in terms of Security. So please give your inputs about the additional functionality and advantages Thanks in advance......... Regards, Sr