Is it possible to to parse data from a log file and dump to an evt or evtx
Have a need to query a set of servers and look for a particular event code. I need to dump the identified events to an .evt or evtx format so it can be read by windows event viewer as well as be read by splunk.
This is the bit I have setup for running against my set of servers:
$servers = "host1","host2",...
foreach ($host in $servers) {
Get-WinEvent -ComputerName $host -filterhashtable @{logname='security';id=4738}
Right now I have it so it pipes the output to a text file, but have not found a way to pipe out only the events I want to an evt or evtx file.
Any suggestions or ideas?
Eric
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4738</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>13824</Task>
<Opcode>0</Opcode>
<Keywords>0x8020000000000000</Keywords>
<TimeCreated SystemTime="2015-01-18T17:47:40.357063000Z" />
<EventRecordID>5276578090</EventRecordID>
<Correlation />
<Execution ProcessID="692" ThreadID="6160" />
<Channel>Security</Channel>
<Computer>somedchostname</Computer>
<Security />
</System>
- <EventData>
<Data Name="Dummy">-</Data>
<Data Name="TargetUserName">someaccountname</Data>
<Data Name="TargetDomainName">somedomainname</Data>
<Data Name="TargetSid">S-something</Data>
<Data Name="SubjectUserSid">S-somethingelse</Data>
<Data Name="SubjectUserName">accountmakingchange</Data>
<Data Name="SubjectDomainName">domainofaccountmakingchange</Data>
<Data Name="SubjectLogonId">0xidofaccount</Data>
<Data Name="PrivilegeList">-</Data>
<Data Name="SamAccountName">-</Data>
<Data Name="DisplayName">-</Data>
<Data Name="UserPrincipalName">-</Data>
<Data Name="HomeDirectory">-</Data>
<Data Name="HomePath">-</Data>
<Data Name="ScriptPath">-</Data>
<Data Name="ProfilePath">-</Data>
<Data Name="UserWorkstations">-</Data>
<Data Name="PasswordLastSet">-</Data>
<Data Name="AccountExpires">-</Data>
<Data Name="PrimaryGroupId">-</Data>
<Data Name="AllowedToDelegateTo">-</Data>
<Data Name="OldUacValue">0x1014</Data>
<Data Name="NewUacValue">0x14</Data>
<Data Name="UserAccountControl">%%2060</Data>
<Data Name="UserParameters">-</Data>
<Data Name="SidHistory">-</Data>
<Data Name="LogonHours">-</Data>
</EventData>
</Event>
Similar Messages
-
I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt 2 KB
read_array.vi 21 KBThe problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does. -
Read data from a log file to flex textarea while deploying
Hi,
I am new to flex. I am able to read data from a log file that placed in C drive and able to write that data into flex textarea, but I am unable to read the same file while it is deployed into weblogic sever.
Could anyone please tell me how to solve this problem.
Thanks,
Sri.Do you have it trying to read that same file on your C drive or is the file actually deployed somewhere on the server?
-
Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg 3797 KBRoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question? -
Deletion of data from change log table and PSA
Hi,
For a DSO I want to delete data from "Chnage log table" and " PSA Tabel".
For the DSO manage screen I have seen " Environment-> " Delete changelog table" from this we can delete chnage log table data as per my understanding.
at PSA Level Mange screen also I have seen " Environment-> " Delete changelog table" from this option also it deletes the data from change log table or it deletes data from PSA table?.
if this option also deletes data from changelog table then how we can delete data from PSA table?
Please clarify meHi,
I am not sure what are you referring to from your point "PSA Level Mange screen also I have seen " Environment-> " Delete changelog table". When ever you click on manage for your psa you will be routed to a popup where you can see all your requests in the PSA table & there after if you click on any single request you will get Environment menu option but there wotn be any change log deletion option available. Please check again? Right clicking on your data source will take you to the manage requests for PSA. You can selectively delete the requests as required.
For DSO when you right click on manage you can directly find Delete change log data option in the Environment tab. there you can select the requests you want to delete.
Also if you want to automate the deletion process then you can simply create a chain and include the steps for PSA deletion & change Log deletion accordingly.
Also it is recommended to keep on clearing the PSA table & Chage log data at regular intervals as it saves the disk space & thus helping in performance optimization
Please refer the below doc at SDN, it will be helpful for you in automating the process of change log deletion & PSA deletion.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Hope it clears your doubts
Thanks -
How to parse data from a text file with no convenient delimiters?
I need to read data from a text file. This file contains one line of data with the repeating pattern "time 00 ADVar2: ___ Height: ____ time 01 ADVar2: ___ Height: ___ ..." I need LabView to parse out the "time" and "height" values, build an array with the values, and graph the correlation on an X&Y plot. Does Labview have an automated way to read to the input data file and parse out the correct values, even without convenient delimiters? Thank you.
You actually do have a convenient delimiter: "time". Thus, you can make an array using that as the delimiter. Only caveat is that the first array element will be empty. Then you can conveniently use the Scan From String function in a for-loop. Something like this:
Message Edited by smercurio_fc on 11-21-2008 03:13 PM
Attachments:
Example_VI.png 9 KB -
I need to read data from a text file and display it in a datagrid.how can this be done..please help
hey ppl
i have a datagrid in my form.i need to read input(fields..sort of a database) from a text file and display its contents in the datagrid.
how can this be done.. and also after every few seconds reading event should be re executed.. and that the contents of the datagrid will keep changing as per the changes in the file...
please help as this is urgent and important.. if possible please provide me with an example code as i am completely new to flex...
thanks.....It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing. -
Retrieve data from one numbers file and insert it in another?
My goal is this: I want to essentially link two numbers files. I need data from several different tables in different sheets to automatically populate cells in a totally separate numbers file.
Here is why: I have very detailed orders that all feed (link) to summary pages that are shared with clients. I also need that same summary information, however, to feed to another file that calculates the margins. The summary pages (sometimes dozens of pages) are critical for clients to see, but as you can imagine, the margins tables must never be seen by the clients. My preference is to have them be totally separate files so it eliminates the possibility of the margins table every being accidentally sent to clients.
I'm wondering if applescript is the only or best way to accomplish this, or if there might be a more simple solution.
Thanks in advance.
BobIt may be done with a script but as I have no info about the structure of the document and about which values must be passed, I can't help you.
More, I doubt that you are sending the Numbers document to your clients because this app isn't widely used.
My guess is that you print the file in a PDF.
The number of pages in the PDF will dramatically change if you include the sheets containing the margins so, it would be easy to check if you built a wrong document.
To do the trick with a script, it seems that the easiest scheme would be:
duplicate the original file
add the columns required for the calculations
create the formulas and insert them
copy the relevant columns
paste them in the original document.
I'm reluctant to work this way. The risk of errors is too big.
Here is an alternate scheme.
In your document, change the layout so that columns which are supposed to be seen by clients are contiguous.
This way, you may easily hide the columns which you want to keep 'secret'.
I don't know the way you are working but with a bit of luck, once the formulas are built, maybe you have no need to unhide the 'margins columns'.
Yvan KOENIG (VALLAURIS, France) mercredi 4 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios -
How to Extract data from a flat file and how to upload it into table
Hi
i want to extract the data from a web page, that data i want to keep in text file.
from the text file i want to read it and i want to upload into table
can any one help me its very urgenthere is my 20min try without debugging (needs a rs232 and loopback connector )
use the probe and highlight the dataflow to see how it works.
as always: there are many ways to solve your problem
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
read write file to RS232.vi 69 KB -
Retrieve data from a text file and insert in table
hi,
i am writing an application which when executes would creates a user table and populates it with the data i.e. username and passwords taking it from a text file.
i would like to know if anybody can help as to how can i retreive the user name and password for every insert statement that will be fired to populate the user table.
thanks in advance for the helpfor csv try a little search:
http://search.java.sun.com/Search/java?col=javafrm&qp=%2Bforum%3A31&qt=csv+import
search for ini files:
http://search.java.sun.com/Search/java?qt=ini+file&col=javafrm&rf=0&qp=%2Bforum%3A31
hope this helps
tobias -
Shell scripts to read data from a text file and to load it into a table
Hi All,
I have a text file consisting of rows and columns as follows,
GEF001 000093625 MKL002510 000001 000000 000000 000000 000000 000000 000001
GEF001 000093625 MKL003604 000001 000000 000000 000000 000000 000000 000001
GEF001 000093625 MKL005675 000001 000000 000000 000000 000000 000000 000001 My requirement is that, i should read the first 3 columns of this file using a shell script and then i have to insert the data into a table consisting of 3 rows in oracle .
the whole application is deployed in unix and that text file comes from mainframe. am working in the unix side of the application and i cant access the data directly from the mainframe. so am required to write a script which reads the data from text file which is placed in certain location and i have to load it to oracle database.
so I can't use SQL * loader.
Please help me something with this...
Thanks in advance.1. Create a dictionary object in Oracle and assign it to the folder where your file resides
2. Write a little procedure which opens the file in the newly created directory object using ULT_FILE and inside the FOR LOOP and do INSERTs to table you want
3. Create a shell script and call that procedure
You can use the post in my Blog for such issues
[Using Oracle UTL_FILE, UTL_SMTP packages and Linux Shell Scripting and Cron utility together|http://kamranagayev.wordpress.com/2009/02/23/using-oracle-utl_file-utl_smtp-packages-and-linux-shell-scripting-and-cron-utility-together-2/]
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com -
Importing data from a .txt file and have Acrobat create new pages
Hi everyone,
I've created a form in Acrobat 9 to be used as an invoice. I want to be able to import data from an excel spreadsheet or .txt file into all the form fields. I know that I can go Forms > Manage form Data > Import Data to import 1 record at a time, but say I have about 50 invoices to populate, is there a way to import all the records at once and have acrobat create a new invoice for each of the customer's records?
If there is a way, will it be compatible for Acrobat Reader users since this form will be used by someone who only has the Reader?
Really appreciate any help.Sure.. this is what we use. "New Micro Right Click Tools"
http://www.nowmicro.com/rct/ -
Compare data from 2 text files and output match
Hi all,
I need some advice.
Firstly in BinaryCode.txt the data is as such:
Replace BinaryCode0 1 0 0 0 0 0 0 0 0
Replace BinaryCode0 1 0 0 0 0 0 0 0 1
Replace BinaryCode1 1 1 1 0 1 1 1 1 1
Replace BinaryCode1 1 0 0 0 0 0 0 0 0
the first line in the text file is the header. So I need to check if the names in the second column (BinaryCode0 or BinaryCode1)appear in the Timed_Sets.txt file.
The data in Timed_Sets.txt is as such:
BinaryCode0,6,40,.........................
BinaryCode0,7,40,.........................
BCName1,0,20,.............................
BCName1,1,20,.............................
For example since BinaryCode0 is a match I will output the entire row in Timed_Set.txt to another array.
I have been working on a program but I don't get the expected output.
The text files and the VI are attached.
I appreciate your kind assistance in the matter.
Thank You
Regards
kart
Solved!
Go to Solution.
Attachments:
BinaryCode.txt 1 KB
compare text files.vi 15 KB
Timed_Sets.txt 2 KBIf I understood correctly what the output should be then what you basically need to do is to walk through the column in BinaryCode.txt and for each unique value pull out the corresponding rows from Timed_Sets.txt. There's a variety of ways to do this, depending on how much data you have and whether or not you can use any kind of prior knowledge as to the actual file content (such as the names of the keys being searched). Attached is one way. Modify as needed.
Attachments:
compare text files MOD.vi 27 KB -
Getting data from an XML file and pushing it to a database
I need to create a coldfusion page that grabs an incoming xml file, extract the data and then push it into a database. I have never done anything like this, and have been reading as much as I can find. Can anyone recomend a good resource or give me a hand on how I go about doing this?
The xml file is coming from another page. Basically the source page is a simple text box that an xml file is pasted into and submited. The action page must grab the xml file, pull out the data and funnel it into a table. Then it must query the table and based on the results of the query, push a new xml file back to the user.
<my brain is already hurting>I'd start by looking at the CF documentation related to XML and Ben Forta's books.
"About XML and ColdFusion" from CF docs:
http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec133ba -8000.html
Ben Forta's books
http://www.forta.com/books/0321679199/
It would be good to know:
1. What the workflow is for your task. Can you describe your task in detail and provide samples of the XML and database?
2. The database you are using and the structure of your tables.
3. The version of CF you are using. -
How can I use Automator to extract specific Data from a text file?
I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE memory (+ 68 range fill )
16 789
bytes of DATA memory (+ 59 absolute )
1 875
bytes of XDATA memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
# CSV spec
# - record separator is CRLF
# - field separator is comma
# - every field is quoted
# - text encoding is UTF-8
local $\\ = qq(\\015\\012); # CRLF
local $, = qq(,); # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
my $f = shift @ff; # file path
if ( ! open(IN, '<', $f) ) {
warn qq(Failed to open $f: $!);
next;
$f =~ s%^.*/%%og; # file name
@dd = ('', $f, '', '', '', '');
while (<IN>) {
chomp;
$dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
last unless grep { /^$/ } @dd;
close IN;
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H
Maybe you are looking for
-
How to get web module for CUSTCRMPRJ (crm 5.0)?
Hello all. I try to create test CRM 5.0 application with own context root. Here are steps from Extension guide: 1) Import the Development Configuration into your Netweaver IDE. 2) Create a new Enterprise Application Development Component in Software
-
Can't set password after upgrade to iOS4 on my iPhone 3g
It took forever but I upgraded my iPhone 3G with iOS4 upgrade. When I tried to open "General" settings the screen reverts back to the default first page with all the apps displayed. I want to set a password but I can't get past this screen. I have tr
-
I am unable to use the disk drive on my G4 with my new MacMini (late 2011)
I have followed the directions RE: enabling sharing on both computers and the G4 shows up on the Mini, but the disk in the drive doesn't show up. I am trying to install some newly purchased software (Adobe Photoshop Elements 10) from the G4 drive to
-
Hi, I'm working with two spark solaris 9 servers in cluster running sun one 6.1 web servers. The servelets/jsp applications have problems reloading a changed class. The java applications are in a storage engine connected by nfs to the servers. We Uss
-
I am trying to update an app but i keep getting a messages saying "your apple ID has been disabled".
I am trying to update an app but i keep getting the message "Your Apple ID has been disabled". What do I do? How can I fix this? My Apple ID works on my mac fine. Help please!