Is it possible to use dbms_debug.execute in SQL Developer?
Hi.
I use remote debug and i would like to query some tables during debug. Is it possible?
I know, that dbms_debug.execute offers functionality to run any sql or pl/sql in target session. Probably, SQL Devleoper already have this functionality?
Thanks in advance.
yes, I copied the wrong code into the example - what I actually want to display in a grid is the following:
CREATE OR REPLACE PACKAGE RSET_CURSOR IS
cursor rs_cursor is select species, location from ot;
r_c rs_cursor%rowtype;
end;
create or replace package rset_cursor2
is
procedure printSpecies;
end rset_cursor2;
create or replace package body rset_cursor2
is
procedure printSpecies is
begin
open rset_cursor.rs_cursor;
loop
fetch rset_cursor.rs_cursor into rset_cursor.r_c;
exit when rset_cursor.rs_cursor%notfound;
dbms_output.put_line(rset_cursor.r_c.species);
end loop;
close rset_cursor.rs_cursor;
end;
end;
I have also just noticed the list I am getting is only including one column of data where it should include 2, have I omitted something?
Thanks
Similar Messages
-
Error using Data Miner on SQL Developer
Dear all.
I'm trying to use Data Miner on SQL Developer (3.1.06) with Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 -
64bit Production, with the Partitioning, OLAP, Data Mining and Real Application Testing options.
I created a project, a workflow, a data source, a classification model and connected them.
I tried to show the Decision Tree generated as described in the tutorial "Using Oracle Data Miner 11g Release 2".
But, I receive the message "It's not possible to load the data mining model because it does not exist" in a dialog box entitled "Model not found".
It seems that something was missing either during installation or granting my user.
Does anybody have seen this message and know what causes it?
Any other suggestion is welcome.
Regards,
Duncan
PUCRS-BrazilHi Mark.
Thank you on replying my post.
I'm not the DBA of Oracle repository here. So, if possible, I'd like to address my issue without having to do anything in it.
I'll try to state better what we have here.
When I try to use latest SQL Developer version, 11.2.1.1.7.42, it got me a message stating current repository isn't compatible with this SQLDev version
Repository version is: 11.2.1.1.3
I don't know what type of upgrade SQL Developer wants to do...
About your other questions.
"Is the model not found error occurring for all models or just the DT model?" -- The error occurs for all 4 standard models: SVM, GLM, NB and DT. But, I'm able to see all other options: "show tests results", "Compare tests results".
You did not report that the workflow failed, so you must be seeing a successful completion status for each of the nodes. -- Yes, all steps are executed and finished OK.
Are you using a proxy user or some other connection definition other than a standard connection. -- No.
There is currently some problems supporting proxy based connections that will be fixed in a upcoming SQL Developer release.
So, if you can provide me some details on how your connection is defined, that will be helpful.
How was the product installed and the user granted rights? -- I need to ask PUCRS DBA team to answer these questions.
Was it done through the UI or by running the scripts in the dataminer/scripts directory?
Lastly, what is your client operating system and are you using the SQL Dev 64 bit or 32 bit release? -- I tested in 2 different computers, both with Windows 7 Professional. In my notebook, it's 64 bits OS version.
Thank you for your attention and kind reply.
Regards,
Duncan -
Problems using Quick Migrate in SQL Developer 1.5 for MySQL to Oracle 10g
Hi all,
I am trying to use SQL Developer 1.5 migration tools (Quick Migrate) to perform online capture and build source model to migrate from MySQL 5.x to Oracle 10g on Windows platform. I get these errors and the Quick Migrate process fails:
oracle.dbtools.metadata.persistence.PersistableObject.doInsert(PersistableObject.java:238)
I did a search and used the sqldeveloper.cmd script but still fails. Then I created a new database and truncated the repository. I now get the above error plus two new ones listed below:
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
Error loading nls:OALL8 is in an inconsistent state
Error occurred during capture: Protocol violation
It fails during the capture process for MySQL 5.1 database
when it begins to capture the tables from MySQL.
Does anyone know how to resolve these issues when migrating from MySQL to Oracle 10g using Quick Migrate with SQL Developer 1.5 release?
Regards,
Ben Prusinski
Message was edited by:
benprusinski
Message was edited by:
benprusinskiHi all,
I put the following in my sqldeveloper.cmd file:
SET ORACLE_HOME=%CD%
What is very confusing is that with SQL Developer 1.5, there are several levels and several SQL Developer executables! I am really not sure which of these to use:
I created the SQLDeveloper 1.5 directory called SQLDeveloper1_5 on Windows:
1) cd C:\sqldeveloper1_5\sqldeveloper-5338
there exists a sqldeveloper.exe
2) cd c:\sqldeveloper1_5\sqldeveloper-5338\sqldeveloper\sqldeveloper.exe
3) cd c:\sqldeveloper1_5\sqldeveloper-5338\sqldeveloper\sqldeveloer\bin\sqldeveloper.exe
Which SQLDeveloper 1.5 executable should I be using and where should I place the
sqldeveloper.cmd file?
Also I did try to use a different database and schema for the repository with Quick Migrate but it appears a bug exists in SQL Developer 1.5 version that causes errors with Quick Migrate for MySQL to Oracle? Is this correct?
As an update, I ran the following commands:
cd to
c:\sqldeveloper1_5\sqldeveloper-5338\sqldeveloper\sqldeveloper\bin
sqldeveloper.cmd sqldeveloper.exe
Start sqldeveloper.exe
Perform standard capture for MySQL using the new mig2 schema as the new repository
It starts the capture but fails on the errors below:
Error loading nls:OALL8 is in an inconsistent state
UPDATE
============================
I tried this again and it worked with the exception of one error message listed below:
Here are the steps that I followed:
1. Create a Windows cmd script
Put the following entries in the script:
SET ORACLE_HOME=%CD%
save the command windows script as sqldeveloper.cmd
Copy this script to the base installation directory for SQLDeveloper
Example:
1. cd c:\SQLDeveloper1_5\sqldeveloper-5338\sqldeveloper
2. Start SQLDeveloper with the command script that you created earlier
Example:
Open a Windows shell prompt window and execute the following scripts:
a) sqldeveloper.cmd sqldeveloper.exe
b) sqldeveloper.exe
3) In SQL Developer 1.5
From the Migrate menu,
a) Delete current repository and create a new schema in Oracle target database call it mig2.
b) Then create a new repository in SQL Developer 1.5
c) Right mouse click on the MySQL 5.x database and choose capture
It worked with the exception of one error message:
o.jdbc.driver.OracleDriver
Error while registering Oracle JDBC Diagnosability MBean.
So it looks like something is screwed up with my JDBC drivers and configuration for MySQL. How do I diagnose the JDBC driver issue for MySQL?
Thanks!!!
Ben
Thanks
Ben -
Using XML functions in SQL Developer
Hi,
I'm using OSD 1.5.3 on a WinXP machine. I love OSD and use it every day! But I think i found a little bug. When you use some Oracle XML functions like (XMLELEMENTS and XMLAGG) in your query (these functions return CLOB values) it hangs OSD.
For Example:
SELECT XMLELEMENT("Relation",
XMLELEMENT("Name", 'Dennis'),
XMLELEMENT("DateOfBirth", '09/28/1975')
) as Relation
FROM DUAL;
Are there some parameters I can set to prevent this, or is this a bug?
Kind Regards,
D.Your query works fine for me from SQL Dev 1.5.3 (JDK 1.6.0_06), using either a JDBC or TNS connection (Oracle Client 9.2) to a 10.2.0.3 DB. Another thing which I have no idea if it is relevant (someone else may be able to say) is the following line from Help > About > Properties:
oracle.xdkjava.compatibility.version 9.0.4
Given that it works fine over TNS connections from SQL*Plus and PL/SQL Developer, I would assume that it is something related to your SQL Developer setup, unless you are using a different version of the Oracle client for these tools.
theFurryOne -
Import data using Excel and Oracle SQL Developer - I need some help
Dear friends,
I'm using Oracle SQL Developer 1.5.1 and I need to import an Excel file into a database table. If I try to import this file in XLS format, fields and headers are correctly being shown and separated, but if I press "Next" button, it simply doesn't do anything - it stays stopped.
I did some search here in this forum and it seems to me that, when you try to import a file via XLS format, SQL Developer has bugs. Is this correct?
If I save the same file in CSV format and try to import the same file, it goes ahead, but SQL Developer is not separating fields and headers correctly. It combines all CSV fields into one - let's say Column0 and fields 1;TEST;01/01/2000 below the same Column0.
Saving the file in CSV format is not a problem, taking a very little time. But I don't know how to make SQL Developer import it correctly. Could somebody please help me? Thanks in advance.
Best regards,
FranklinHello K,
yes, you're right. I found the following topic after posting this question here.
Re: After update to 1.5.1, import from Excel fails
I downloaded version 1.5.0 and I'll use it whenever I import data from Excel.
Thanks,
Franklin -
Connect using OS authentication in SQL Developer
Hi,
We are using OS authentication to connect on Oracle, if I use SQL*PLUS I use only sqlplus /@instance but someone knows how can I connect on Oracle using OS authentication ? I tried to use / or blank username in SQL Developer and it requests an user and password...
Thanks in advance,Thanks for your answer Raghu, when this feature will be implemented it will help a lot to keep security.
Regards,
Joao -
Using tab key in SQL developer
I am trying to write my PL/SQL code using SQL developer and I want to use the tab key for my alignment. Whenever I press the tab key the cursor is not moving forward. Do any of you know how can I make it work?
Thanks in advance for your help.Thank you for pointing out a "known problem" with the accelerators! I've been having a problem whereby I suddenly became unable to use the backspace or delete keys to make changes to code. Interestingly, I loaded the preset accelerators as you suggested to handle problems with the tab key and suddenly everything else works fine now.
Regards,
John -
Unable to use backspace key in SQL Developer
hi
I am unable to use backspace or arrow keys in SQL worksheet using SQL developer.
Can any one help me out...?
You can also contact me on [email protected]
regards
AhsanHi,
to give a worst case. I downloaded actual releases for JDeveloper and SQLDeveloper for MacOS and on my Mac this case is totally unsolved. I tried to check he settings within the preferences.xml but no "googled" solution works to get SPACE and BACKSPACE to work.
I will try the older versions.
I previously used my migrated versions from my older Linux system and everything worked fine. Installing the integrated MacOS versions is fine but using the linux way (using the shell command) seems to work. Hope this will help to find the bug within the packages.
Bye,
Holger -
Error Message Using DB.Execute on SQL Server - Must use dbSeeChanges
Uh, found a post indicating that dbFailOnError and dbSeeChanges are enumerated and that to designate them both, just add them together, but its not working and I'm still getting the ever popular 'You must use the dbSeeChanges option with OpenRecordset when
accessing a SQL Server table that has an IDENTITY column.'.
Public Function deleteTrailerActivityHeaderAndChildren(lngTrailerActivityHeaderId As Long)
On Error GoTo Err_deleteTrailerActivityHeaderAndChildren
Dim wrksp As DAO.Workspace
Dim db As DAO.Database
Dim strDeleteChild As String
Dim strDeleteParent As String
Dim strComment As String
Dim errLoop As Error
strDeleteChild = "DELETE * FROM tblTrailerUtilizationDetails WHERE lngTrailerActivityHeaderId = " & lngTrailerActivityHeaderId
strDeleteParent = "DELETE * FROM tblTrailerActivityHeaders WHERE lngTrailerActivityHeader = " & lngTrailerActivityHeaderId
Set wrksp = DBEngine.Workspaces(0)
Set db = CurrentDb
wrksp.BeginTrans
On Error GoTo Err_dbExecute
strComment = "Delete child records"
db.Execute strDeleteChild, dbFailOnError + dbSeeChanges
If DBEngine.Errors.Count = 0 Then
strComment = "Delete parent"
db.Execute strDeleteParent, dbFailOnError + dbSeeChanges
If DBEngine.Errors.Count = 0 Then
strComment = "Commit changes"
wrksp.CommitTrans
Else
strComment = "Rollback changes to tblTrailerActivityHeaders"
wrksp.Rollback
MsgBox "Record cannot be deleted. Unable to delete the Trailer Utilization Detail records.", vbCritical
End If
Else
strComment = "Rollback changes to tblTrailerUtilizationDetails"
wrksp.Rollback
MsgBox "Record cannot be deleted. Unable to delete the Trailer Utilization Detail records.", vbCritical
End If
Debug.Print DBEngine.Errors(0).Description
On Error GoTo Err_deleteTrailerActivityHeaderAndChildren
Set db = Nothing
Set wrksp = Nothing
Exit_deleteTrailerActivityHeaderAndChildren:
Exit Function
Err_deleteTrailerActivityHeaderAndChildren:
MsgBox getDefaultErrorMessage("Module - Manage TrailerUtilization Details", "deleteTrailerActivityHeaderAndChildren", Err.Number, Err.Description), vbCritical
Resume Exit_deleteTrailerActivityHeaderAndChildren
Err_dbExecute:
If DBEngine.Errors.Count > 0 Then
For Each errLoop In DBEngine.Errors
Debug.Print getDefaultErrorMessage("Module - ManageTrailerUtilizationDetails", "deleteTrailerActivityHeaderAndChildren.Err_dbExecute", errLoop.Number, , "(" & strComment & ") " &
errLoop.Description)
Next errLoop
End If
Resume Next
End Function
David HHi aychekay
Try following:
- Add a TimeStamp Datatype Column to the table on the SQL Server
- Rebind the tables into your database
- Try your code again
You never should run an Access Application against an SQL Server in readwrite mode without having TimeStamp datatype columns in your tables. Already for performance reasons this is a must and also, if you have datetime datatype fields on
the SQL Server that are not exclusively maintained by Access, as the SQL Server may add miliseconds when writing the data. Same for Single precision datatypes, that may be rounded until you get the result back from the server. If you have a Timestamp datatype
column in your table then Access is sure the record wasn't changed in the meantime and will not recheck the received record again against the database for changes in one of it's fields.
Henry
<aychekay> wrote in message
news:[email protected]...
This problem didn't go away yet. I'm having it too in Access 2007 (SP2 not installed yet) with a SQL Server 2008 Express backend. I'm sure my code is not reference any form controls or other object references. Access just complains if you try to run an Execute
with "DELETE" on a table that has an identity column. I've resorted to deleting using a DAO recordset and loop instead for now.
I actually started out using MySQL with MySQL's ODBC drivers and my statement worked fine. Only when I migrated to SQL Server did I start to have this problem.
Just sayin... -
Is it possible to use Jdeveloper with Other Sql Server using JDBC-ODBC bri
I have been able to successfully establish connection with Sql server Using JDBC-ODBC bridge, but when i run the application and perform some operations such as insert the following errors occur:
(oracle.jbo.SQLStmtException) JBO-27122: SQL error during statement preparation. Statement: SELECT ItmUnit.ORG_CODE, ItmUnit.UNIT_CODE, ItmUnit.UNIT_NAME, ItmUnit.ADDRESS1, ItmUnit.ADDRESS2, ItmUnit.ADDRESS3, ItmUnit.CITY_CODE, ItmUnit.USER_ID, ItmUnit.TIME_STAMP FROM ITM_UNIT ItmUnit
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [DataDirect][ODBC Sybase Wire Protocol driver]Sybase does not allow more than one active statement when retrieving results without a cursor
(oracle.jbo.DMLException) JBO-26041: Failed to post data to database during "Insert": SQL Statement "INSERT INTO IMMS.HRM_UNIT(UNIT_CODE,UNIT_NAME) VALUES (?,?)".
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt
(oracle.jbo.AttrValException) JBO-27014: Attribute DeptCode in HrmUnitDept is required
(oracle.jbo.SQLStmtException) JBO-27122: SQL error during statement preparation. Statement: SELECT HrmUnit.UNIT_CODE, HrmUnit.UNIT_NAME FROM IMMS.HRM_UNIT HrmUnit
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmtYes, you can do that. For testing purposes you can also create simple files (with mkfile) and add these to ASM. That way you could also experiment with deleting files and see what happens in ASM
Bjoern -
How to view changes using SVN plugin for SQL developer
Hi,
We recently moved to SVN. I have checked out the PL/SQL code from the SVN server to my local C Drive. But after I have made changes to couple of PL/SQL files, I am not able to figure out how to see my changes and compare with the checked out version (for example, like we have CVS diff option). I searched through the options but could not find any suitable option.
Can someone point or help how to do this ?
I want to check my changes before committing to the main trunk
Thanks,
RaviIn your window where you edit queries, right above the window, below the tab, next to a tab that says "SQL Worksheet" there is a tab that says "History"; click that, see diff(s). See here: http://duncandavies.files.wordpress.com/2009/02/sqldeveloperhistorytab.jpg?w=460&h=257
-
How to operate multiple querys using DB Adapter and 'Execute Custom SQL'
I have a requirment that I need to create database adapter in your BPEL process with 'Execute Custom SQL' to operate multiple query in DB in one atomic
here are the details:
inbound request:
<ns1:Query_bpelProcessRequest>
<ns1:input>
<ns1:ItemDetail>
<ns1:ItemID>1123DDDS</ns1:ItemID>
</ns1:ItemDetail>
<ns1:ItemDetail>
<ns1:ItemID>1126EWWA</ns1:ItemID>
</ns1:ItemDetail>
<ns1:ItemDetail>
<ns1:ItemID>11208FSAA</ns1:ItemID>
</ns1:ItemDetail>
</ns1:input>
</ns1:Query_bpelProcessRequest>
I use for-each fuction in XSLT to mapping the all ItemID value:
<xsl:template match="/">
<xsl:for-each select="/tns:Query_bpelProcessRequest/tns:input/tns:ItemDetail">
<ns1:QueryFromDB_Input>
<ns1:ItemID>
<xsl:value-of select="tns:ItemID"/>
</ns1:ItemID>
</ns1:QueryFromDB_Input>
</xsl:for-each>
</xsl:template>
and in DB Adapter I use the 'Execute Custom SQL' to query the CONTENT value according the ItemID value:
select distinct CONTENT from agile.item where ITEM_NUMBER=’<ItemID>’
However, in the result, It only query the first item value for <ns1:ItemID>1123DDDS</ns1:ItemID>
<<QueryFromDB_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="QueryFromDB_Input_msg">
<QueryFromDB_Input xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/QueryFromDB" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/QueryFromDB">
<ns1:ItemID>1123DDDS</ns1:ItemID>
</QueryFromDB_Input>
</part></QueryFromDB_InputVariable>
<QueryFromDB_OutputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="QueryFromDB_OutputCollection">
<QueryFromDB_OutputCollection xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/QueryFromDB">
<QueryFromDB_Output>
<ITEM_NUMBER>1123DDDS</ITEM_NUMBER>
<CONTENT >SJIFESSFFJ</CONTENT >
</QueryFromDB_Output>
</QueryFromDB_OutputCollection>
</part></QueryFromDB_OutputVariable>
the other two querys are not operated.
what can I do to operate multiple querys??
ThanksHi Rod,
I are using while loop and assign array inputvalue to the inputvarable of DBadapter now, but actually it doesn't work.
Throw expection
<selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"><part name="summary"><summary>XPath query string returns multiple nodes.
According to BPEL4WS spec 1.1 section 14.3, The assign activity part and query /client:ItemsQuery_bpelProcessRequest/client:input/client:inputDetail/client:ProductID["ItemIndex"] should not return multipe nodes.
Please check the BPEL source at line number "89" and verify the part and xpath query /client:ItemsQuery_bpelProcessRequest/client:input/client:inputDetail/client:ProductID["ItemIndex"].
Possible reasons behind this problems are: some xml elements has maxOccurs > 1 or the xml data is invalid according to XML Schema.
To verify whether XML data received by a process is valid, user can turn on validateXML switch at the domain administration page.
</summary>
</part></selectionFailure>
my inbound XSD:
<element name="ItemsQuery_bpelProcessRequest">
<complexType>
<sequence>
<element name="input" type="tns:inputType"/>
</sequence>
</complexType>
</element>
<complexType name="inputType">
<sequence>
<element name="inputDetail" minOccurs="0" maxOccurs="unbounded">
<complexType>
<sequence>
<element name="ProductID" type="string" minOccurs="0"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
<element name="ItemsQuery_bpelProcessResponse">
<complexType>
<sequence>
<element name="result" type="tns:outputType"/>
</sequence>
</complexType>
</element>
<complexType name="outputType">
<sequence>
<element name="ItemOutput" minOccurs="0" maxOccurs="unbounded">
<complexType>
<sequence>
<element name="item_id" type="string" minOccurs="0"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
DB Adapter XSD:
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/QueryItem" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/QueryItem" elementFormDefault="qualified" attributeFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="QueryItem_Input" type="QueryItem_Input"/>
<xs:complexType name="QueryFrom_Input">
<xs:sequence>
<xs:element name="ProductID" type="xs:string" nillable="true"/>
</xs:sequence>
</xs:complexType>
<xs:element name="QueryItem_OutputCollection" type="QueryItem_OutputCollection"/>
<xs:complexType name="QueryItem_OutputCollection">
<xs:sequence>
<xs:element name="QueryItem_Output" type="QueryItem_Output" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="QueryItem_Output">
<xs:sequence>
<xs:element name="item_id" type="xs:string" nillable="true"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
the bpel assign:
<assign name="Initial_Index">
<copy>
<from expression="0"/>
<to variable="ItemIndex"/>
</copy>
</assign>
<while name="While_1"
condition="bpws:getVariableData('ItemIndex')<ora:countNodes('inputVariable','payload','/client:ItemsQuery_bpelProcessRequest/client:input/client:inputDetail/client:ProductID)">
<sequence name="Sequence_1">
<assign name="Assign_QueryInput">
<copy>
<from variable="inputVariable" part="payload"
query='/client:ItemsQuery_bpelProcessRequest/client:input/client:inputDetail/client:ProductID{bpws:getVariableData('ItemIndex')}'/>
<to variable="QueryItem_InputVariable"
part="QueryItem_nput_msg"
query="/ns2:QueryItem_Input/ns2:ProductID"/>
</copy>
</assign>
<invoke name="Invoke_QueryDB" partnerLink="QueryItem"
portType="ns1:QueryItem_ptt"
operation="QueryItem_PSFT"
inputVariable="QueryItem_InputVariable"
outputVariable="QueryItem_OutputVariable"/>
<assign name="Assign_Output">
<copy>
<from variable="QueryItem_OutputVariable"
part="QueryItem_OutputCollection"
query="/ns2:QueryItem_OutputCollection/ns2:QueryItem_Output/ns2:item_id"/>
<to variable="outputVariable" part="payload"
query='/client:ItemsQuery_bpelProcessResponse/client:result/client:ItemOutput/client:item_id{bpws:getVariableData('ItemIndex')}'/>
</copy>
<copy>
<from expression="bpws:getVariableData('ItemIndex')+1"/>
<to variable="ItemIndex"/>
</copy>
</assign>
</sequence>
</while>
I use {} instead of [] for array, because [] seams not reveal in this message board
seems I can't assign array values to the DB inputvalue, Are there any solutions for this ?
I still haven't found any way for operating multiple querys using DB Adapter.
Thanks
Edited by: user1065212 on 07-Jan-2010 19:39
Edited by: user1065212 on 07-Jan-2010 19:41
Edited by: user1065212 on 07-Jan-2010 19:44
Edited by: user1065212 on 07-Jan-2010 19:45 -
Using PPR in PL/SQL generated webpages
I have a question about using PPR with web pages written in PL/SQL.
I have a dropdown menu that I want to limit by the value selected in the preceding dropdown (pick-list).
So far I have not found much information on PPR other than on OTN, and was unable to find any PL/SQL coding samples; so I guess I should ask...
- Is it possible to use PPR in a webpage generated from a stored PL/SQL procedure/package?
- If so, how do I make use of PPR in PL/SQL?
- If it is NOT possible to use PPR with PL/SQL, what other methods could I make use of other than JavaScript?
Thank you in advance,
CharlieWhen I run the following script, the 2nd time the test1 procedure runs, it fails with "PLS-00905: object TEST1 is invalid", whereas test2 runs fine both times.
Feel free to try it yourself!
create table boneist_test (col1 number, col2 varchar2(10));
insert into boneist_test values (1, 'a');
commit;
create procedure test1
is
v_num number;
v_var varchar2(10);
begin
select *
into v_num, v_var
from boneist_test
where rownum = 1;
end test1;
create procedure test2
is
v_num number;
v_var varchar2(10);
begin
select col1, col2
into v_num, v_var
from boneist_test
where rownum = 1;
end test2;
begin
test1;
end;
begin
test2;
end;
alter table boneist_test add (col3 number);
begin
test1;
end;
begin
test2;
end;
drop table boneist_test;
drop procedure test1;
drop procedure test2; -
Using https protocol thru Oracle Developer 6.0
Hi ,
I would like to know if it is possible to use https protocol from Oracle Developer 6.0.
we have used http protocol when using
Show_Document() and it works fine. But when we try to use https (which our application requires - secure mode)then we get the following error:
FRM-99999 Invalid URL sent to browser with target_BLANK.
Full Details: unknown protocol:https
We would appreciate any help on this problem.
Are there any patches which would enable the use of this protocol??
Thanks,
Sanjay Sinha
email:[email protected]
nullThere are other services that may cause you trouble.
I have had to turn off SMTP and DHCP services in the past. -
Limit users to execute "SELECT" statemes only from SQL Developer
Hi:
Is there a way to control what SQL command can be executed from SQL Developer?
I am trying to limit users to execute "SELECT" statements only from SQL Developer.
I believe SQL*Plus used to have the product profile where I can control what SQL command can be executed from what user.
Thanks in advance.There's nothing special in sqldev to enforce privileges, the database does all that already. See the database documentation on the GRANT and REVOKE statements. Basically, you would only want to grant SELECT privileges to your users...
Have fun,
K.
Maybe you are looking for
-
BAPI/RFC for Service Complaints Creation in CRM 5.0
Hi, We are working on the Complaints and Returns module in CRM 5.0. We have found the Transaction Code for the same. (CRMD_BUS2000120). Not able to find the BAPI/RFC for the same.Let us know if any. Appreciate your comments on the same. Thanks, Moort
-
About a few weeks ago my iPad 2 screen cracked. I don't know how it happened, but we think that someone might have stepped on it. It wasn't bad at all, but then it spread. One small crack across the middle & top, with a large "spider web" crack on
-
So AEBS doesn't work with my OS?
I just got back from the Apple store with a brand new 802.11n router which the sales rep assured me will work on my older "g" laptop. What he didn't tell me is that it is not compatible with OS 10.3.9 which I discovered AFTER opening the box and read
-
Nokia 5800 V40.0.005 now available in South Africa
Just found out that V 40.0.005 is now available for South African Phones (0575950). On my way to download it now - - - Such a long wait!!! Nokia 5800 XpressMusic Red V52.0.007 Hit the Kudos if I helped!
-
HOW TO CONNECT FROM CLIENT MACHINE TO REMOTE MACHINE(SERVER DATABASE MACHINE)
Hi friends. I need your valuable help, I am using oracle 11g database. I have two system.One is client machine and installed oracle 11G client software. and from this machine user can connect remote server database(This is old remote system, this is