Is Leap supported on a point to point bridge connection within the 350?

Yes...
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350brdgs/brscg/br350ch4.htm

Similar Messages

Can I change the record an EJB points to from within the bean?

I have a problem which I hope someone can help with.
I'm programming an EJB application which references several 'price list' type tables. An order will contain several option selections, which reference options, which each have an associated price. A system administrator is going to have to change and update these prices as tim egoes on, and may want to remove options etc. In order to ensure that existing orders don't have their values changed as a result of this we've decided that, when options have their price changed, we actually create a new option record, setting an end_date on the old option record to signify that it's no longer valid for new orders being raised. In the option Beans set cost method, I set the end_date property of the bean and call the create method of the options own home interface.
My problem is this: At the moment I return the newly created option as a return value of the setCost method but I feel this is a little graceless. Ideally I'ld like to change the bean to point at the new record as part of the set method itself, that way, to the client it would appear as if tey were still looking at the same bean but with an updated price, which is what you'ld normally expect from a set method. Can this be done?

Um, yeah - graceless is a good word. Essentially, you've stuck business logic into the EntityBean (I'm guess that's what you're using for data persistence). What you need to do is move the Option.create() method out of the EntityBean and use a StatelessSessionBean to execute the logic: update the old Option record, create the new one, then return the result.
As an aside, it's considered Not Very Good Practice to have client applications directly accessing EntityBeans: serializable DataObjects (e.g. JavaBeans, not EJB) or ValueObjects (non-"changeable" DOs) are better at passing data back and forth between client applications and application container. Ideally, this flow is like this:
client <- VO -> SSB <- DO -> EntB
This lets the EntityBean just worry about getting data in/out of storage, the (business) logic resides in the StatelessSessionBean and the client interacts/shows the data.

1300 Series Access Point/Bridge Power Injector - Using power over ethernet

Can I use power over ethernet to supply the Injector with power?

Hi Mikael,
Sorry, this will not work. Have a look at these specs;
1300 Series Power
Power
The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.
The power injector is available in two models:
Cisco Aironet Power Injector LR2 standard version (included with the access point/bridge)
48-VDC input power
Uses the 48-VDC power module (included with the access point/bridge)
Cisco Aironet Power Injector LR2T optional transportation version
12- to 40-VDC input power
Note The power injector and the power module must not be placed in an outdoor unprotected environment. The power module must not be placed in a building's environmental air space, such as above a suspended ceiling.
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_chapter09186a008079b93b.html#wp1051840
Dual coaxial cable to run from the power injector to the 1300. See attached notes:
Cisco Aironet 1300 Series
Cisco Aironet 1300 Series Access Point/Bridge Power Injector
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable?enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Ethernet Ports
The access point/bridge dual-coax Ethernet ports consists of a pair of 75-ohm F-type connectors, linking the unit to your 100BASE-T Ethernet LAN through the power injector. The dual-coax cables are used to send and receive Ethernet data and to supply inline 48-VDC power from the power injector to the access point/bridge.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_book09186a00804d3095.html
AIR-PWRINJ-BLR2
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html
Hope this helps!
Rob

Point-to-point SSL connection

Hi all
In my project, I need to use SSL, however, there is a server at the middle that connects to the Internet and I want to make a point-to-point SSL connection with the Internet client through that middle server. The following is the network configuration of the system.
Server A is the server that proccesses the data and it has no internet connection.
Server B is connected with Server A with a leased line and it has internet connection, so that client with Internet access can connect to it.
Client uses the Internet and connects to Server A through Server B.
Now I want to know if it is possible that Client can make a point-to-point SSL connection to Server A because I don't want my data to be decrypted by Server B.
Thank you !
Edmond

(My remarks might be entirely beside the point. Nevertheless.)
Here a Web Service seems appropiate; Sun has its SDK, IBM offers things also, etcetera.
The advantage of a web service, is that inside the message envelope several parts can have different encryption. Just for these kind of indirect tunneling web services are meant. In fact "web" is just a buzz word, communication by email is just an option too.
However I hope, that someone else might have a more direct solution.

SSH Version Supported by Access Points

Hi,
I'm hoping this is an easy question...so apologies if it appears facile, but I can't find a definitive answer in any Cisco docs I've looked through.
When access points are used with a WLC, its possible to allow the access points to accept SSH connections (Under the advanced tab of the AP config).
My question is this: which version of SSH will be used when SSH sessions are created to the AP? (SSH v2?)
All of the data sheets etc. talk about SSH support, but give now version details.
Thanks in advance.
Nigel.

Hi Nigel,
Scott is right (as usual )
Just to confirm, I accessed a CAPWAP AP and looked at the #sh derived-config and this was the only SSH output shown, with SSH enabled on the AP:
ip ssh version 2
So, it looks like only SSH2 is allowed. Just to let you know the code ver was 7.0.116.0
Rocky

3502p AccessPoint support MESH and Point-to-Point Wireless Bridging with Outdoor Antennas??

I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging??

The 3502p is only used for arenas and or stadiums. These are different units than the 3500's and 3600's. So no they can't be.
You can use Cisco Aironet 1400 Series Wireless Bridge for a wireless link between two buildings (1km) to extend your LAN. For more detail you can go through the below link.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5279/ps5285/product_data_sheet09186a008018495c.html

Feature request: Add left-handed users support for Show Pointer

Show Pointer is a very useful tool for precise movements and operations on the touch display.
However, the way it currently works is optimized for right-handed people (as the button is on the left side and you maneuver with the right hand.
As there are very many left-handed people among creative individuals, I'm kindly asking to add left-hand support to Show Pointer, which would effectively mirror the user interface of the tool (button on the right side).
This could be configured in the Photoshop Touch setting panel.
I would really appreciate someone from Adobe reading this and adding this to the product backlog. Thanks.

If I'm ever asked to give input, I'll be sure to +1 for you.

Does Web Dynpro support adding Enhancement Points/Sections

Hi,
Can someone answer whether the ABAP Web Dynpro framework is supposed to support add enhancement points/sections to code within a component method?
Cheers
Michael Arter

hi,
check out this link :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/c21ba177be3376e10000000a421937/frameset.htm
also check out the foll post:
Pre-Exits and Post-Exits for WDA
hope this will surely help you!!!
Thanks & regards,
Punit Raval.
Edited by: punit raval on Jul 9, 2009 10:53 AM

HT201209 When my purchase points in one of the programs through the iPhone show me this message:- Your purchase could not be completed.. contact iTunes store support to complete this transaction

When my purchase points in one of the programs through the iPhone show me this message:- Your purchase could not be completed.. contact iTunes store support to complete this transaction??

Welcome to the Apple Community.
Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

Page slow - Disabled grid support for display point

The page loads slowly and it shows the following debug entries "Disabled grid support for display point".
There is as well global page 0's regions in the page.
I can't figure out which page regions/items are our exceeding the grid.
The show-grid on the page shows green grid, but hmm. cant figure out the amount of grids.
1. Where to look for this grid + items problem in the Page Designer?
Application Express 5.0.0.00.31
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
Theme 25, subscribed from Apex5 repository
Upgraded application from 4.2
Two Level Tabs - Left Sidebar
Elapsed
Execution
Message
Level
0.13712
5.94805
Disabled grid support for display point BODY because there are no more grid columns available!
2
6.08515
6.19260
Disabled grid support for display point BODY because there are no more grid columns available!
2
12.27775
Page contains page items/buttons which are not assigned to a region!
2
Rgrds Paavo

Hi, found inefficient sql and by using Tuning Advisor I was able to tune them, so now it renders faster.
When looking the LEVEL9 debugs there are still those rows with
0.40106
0.00180
Disabled grid support for display point BODY because there are no more grid columns available!
and
0.56902
0.00003
Page contains page items/buttons which are not assigned to a region!
0.56906
0.00010
......Render page items and buttons
0.56916
0.00038
...No grid layout necessary, because
everything is displayed in first column
So the question are those messages 'harmless' and can I leave the page as it is or should I try to find what is leaking on the page?
What is the consequence of Disabling grid support - messed page on certain browser?
Is there method to show how many GRID's there are (12 ?) and which page item is in which grid.
Rgrds Paavo

Can I create a wi-fi network on my macbook and still connect to the internet via an actual wifi point?

Hi,
I got TrakProDJ from the app store and installed it.
It allows me to control a DJing software with my iPad by setting up a network via Wifi Symbol in Toolbar>Create Network...
The problem with this is the network I create isn't based in the internet--it's just a wifi link between my laptop and iPad.
I'm sure I'll get asked to play songs I'll have to look up on youtube, so how is it possible that I can maintain my wifi network connection on my macbook and create an access point for my iPad to use to communicate with my laptop (to control the DJing software)?
I'll really appreciate any help I can get!
Thank you!

You cannot use both an ad-hoc network and a normal ap based one with any wireless device. Your only solution is to use a wired Internet connection to do so on the laptop, that way you use that for Internet access and your wifi for the ad-hoc network the app requires. You might want to contact the developer of that app and find out why they limit the setup to just an ad-hoc wifi setup. Seems that if all it requires is just a network connection to the laptop, they could simply use any existing network connection as long as both devices can see each other on it. Either that or also give the user the option to use Bluetooth for it if they have the higher version of hardware to support the necessary data exchange.

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

Hello Pushtheriver,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud storage issues:
Get help using iCloud storage
This may also help:
Understanding iOS device capacity
You can sync and download many different types of content on your device. Some types of content (such as music and videos) typically take more space than others (such as notes and books). The amount of space taken by an app depends on the app's purpose; complex or graphically intense apps usually take more space than simpler apps.
If your device is near its capacity, you can remove some of the less used content to make room for more.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. Any thoughts?

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?

Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

Welcome to Apple Support Communities
Press Alt, Command and Esc keys, select the crashed app and force quit it. Then, open this app again.
If you didn't save this document, it's possible that you lost the changes you made unless you have OS X Lion or Mountain Lion and they saved your document automatically

Is Leap supported on a point to point bridge connection within the 350?

Similar Messages

Maybe you are looking for