Is my apple ID password my passcode for my iPad after ios 7?

I have recently updated my iPad to the new os, (ios 7). When it turned on again it said I must input a passcode but I have never set one. I am woondering if it could be my apple ID password.
On a side note, I have also tried to reset my iPad but it won't let me due me needing to enter a passcode.
Any help would be much appreciated.

I am having exactly the same issue and tearing my hair out. I never set up a passcode, yet it has locked me out and insists on a passcode. I have tried all combinations and none were accepted, so I am also stuck.
Itunes says it can't sync with it because it has been disabled. I followed online instructions to reset the IPAD by unplugging from computer and turning it off then using button below and plug it back in, restore factory settings etc which was another 1 hour downloading proces, but it made no difference, it still wants a passcode. AAARGH has anyone had any success gettting theirs unlocked? Mine is brandnew and never even been used...

Similar Messages

  • HT201365 I have forgotten my passcode for my iPad air and I have tried to erase it and start over, but I stuck!!  I just got it and I'm just starting to activate it as a new iPad

    I have forgotten my passcode for my iPad air and I have tried to erase it and start over, but I stuck!!  I just got it and I'm just starting to activate it as a new iPad

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I forgot my passcode for my ipad

    I forgot my passcode for my iPad how do I open my iPad now???

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    This will tell you how to restore
    http://support.apple.com/kb/HT1414
    You will probably need to use recovery mode
    http://support.apple.com/kb/ht4097

  • I never set a passcode for my iPad but it is locked and I can't get it unlocked.  The "slide to unlock" does not work.  How do I get it unlocked?

    I never set up a passcode for my iPad 2 but it is locked and I can't unlock it.  The "slide to unlock" does not work.  Any suggestions on how to unlock it?

    You have to slide to unlock to bring up the keyboard if a passcode is set. If you can't slide then try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • I have forgotten/never had a passcode for my ipad how can I find/set one up?

    I have forgotten/never had a passcode for my ipad.  How can I find/set one up?

    Hi doph4140,
    If you are able to access/unlock your iPad currently (does not have a passcode) and you are looking to set one up, you may find the following article helpful:
    iOS: Using passcodes
    http://support.apple.com/kb/ht4113
    If, instead, you are unable to unlock your iPad due to a forgotten passcode, then this article may be more useful:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Regards,
    - Brenden

  • HT1620 I have forgotten my passcode for my iPad what can I do?

    I have forgotten my passcode for my iPad.  I have managed to resotre my iPad but I am now back to "enter passcode". How do i find it?.

    http://support.apple.com/kb/HT1212

  • My apple id/password work on my iPhone, iPad and new iMac, except when I try to access the cloud, then it says the id/password are incorrect.   same id and password works on everything else.  Help

    my apple id/password work on my iPhone, iPad, and on my new iMac, except for the Cloud that says the id/password are incorrect.   works on all the other iMac apps, just not the cloud.  Help

    Go to settings>store and make sure the new apple ID is logged in at the bottom of the page.
    If not, log out of the old one and sign in with the new one.

  • HT2305 I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unloc

    I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unlock it.

    Also when I am trying to connect ipad to my windows PC, it shows, your software is up to date and later starts restoring while updating again. Then automatically it stops to update halfway and I have to repeat the process again and again, still in vain.

  • HT1222 Does apple make a drawing pen for the iPad?

    Does apple make a drawing pen for the iPad ?

    No, apple doesnt have any apple branded stylus pens. An apple store worker recommended one to me and I loved it so my recommendation is the amPen Hybrid Stylus pen from Amazon. Great stylus, features the fiber mesh tips that dont stick or drag on the screen. They have a few colors you can choose from too.
    They are under 8$ and have free shipping too.
    http://amzn.to/1b5zJo0

  • I can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi

    i can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi.

    i switched off all the security settings and all the firewalls.
    i m unable to install any of the app on the ipad
    so i saw the apple support and it said to update the older version of my ipad.
    and niether am i able to download the update nor am i able to download any app and install it in my ipad2
    i also tried to download an .ipsw file (ios5 update) from torrentz bt i am also unable to install from that as itunes rjects that file and gives an error. and also tries to delete that file. plz anyone help urgently.

  • HT5654 hello i wander if you could help me i cannot remember the passcod for the ipad ive tried restoring the ipad but because the ipad needs a software update i cant do it!!!!

    Hi i am unable to remember the passcode for our ipad can u help please

    Forgotten passcode or device disabled after entering wrong passcode

  • I forgot my passcode for my iPad. How do I retrieve it?

    I forgot my passcode for my iPad. How do I retrieve it?

    Try and force iPad into Recovery Mode:
    1. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    2. Connect USB cable to computer, leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • How do i disable a incorrect passcode for my ipad

    How do i disable or reset a incorrect passcode for my ipad? can anyone assist.

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • I forgot my restrictions passcode for my ipad. under settings i went to "erase all content and settings" but it needs the passcode. how do i restart my ipad so it can go back to normal? i dont care about losing everything on it

    i forgot my restrictions passcode for my ipad. under settings i went to "erase all content and settings" but it needs the passcode. how do i restart my ipad so it can go back to normal? i dont care about losing everything on it

    Try and force the iPad Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

Maybe you are looking for

  • What version of final cut pro works with ibook G4

    I recently installed Final Cut Pro 4 HD in my iBook G4. The install went well although the program hangs when it reaches the part when it searches for audio drivers. I'm a newbe to Mac so any help would be appreciated.

  • ABAP Today's Inventory

    Hello ABAP developers, I need to calculate today's inventory for an specific material (from table MARA) How can I do this? Thanks, Ol Pom.

  • I've seen several issues with updating Apps.  Is there a problem on Apple's end?

    I'm unable to update my Apps.  The "Update All" button is not highlighted.  If I click on the individual App, it just goes to that App, instead of updating it.  I've seen this issue from other people, but no one has supplied an answer that I've seen.

  • Build SVG graphic for Select statement

    I asked an earlier question and need to refine it or even ask it differently.. So here goes.. I have a report, that is built using a select statement.. In this report I need to have an item that is a barcode printed. I have a function that is from a

  • Requirement Tracking number used in WM modules

    Dear all, What are the different Requirement Tracking number used in WM modules. Like we use 632 for auto TO creation for outbound delivery. please suggest me Regards, Rock