Is the 3.4 Prescott a worthy UpGrade

I was thinking of upgrading my cpu ...and from what I found the 3.4 Prescott is the last one for the 478 socket....(found no info for a 3.6 ....only on the 775 board?) and was wondering if any one here has personal exp.....with the 3.4 Prescott cpu for the 478 socket.... Is it overclockable to....say to 3.8? and do u find any speed gain from the 1MB cache.... THX...

Quote
I heard you could get 3.7ghz out of a 3.2, so you most likely don't need a 3.4.
I can get 3.61 out of my 2.8e no problem
Quote
and deffinately not a prescott cause they run too hot
Prescotts get a bad rap for this . Everyone( including me) thought that they could just plug and play with a prescott. Then they started to complain about the heat issues . Well after doing some research I found out that Intel specificallyrecomends a " thermally advantaged" chassis
While they do run hotter than a Northwood managing this heat is really not that hard. Here is a good article about Prescotts ( co authored by yours truly )
http://www.overclockers.com/tips1179/
If you are considering a Prescott you need to make sure you have the latest Bios that supports the prescott micro code, A powersupply that has at least 22 amps on the 12 volt rails and good airflow thru the case
Good Luck
Dave

Similar Messages

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

I get, You're not on the latest version of Firefox. Upgrade today to get the best of the Web! When I go to the update site it tells me that I have the latest version.

I start the Firefox browser.
When the start page displays I get just below the Google search box:
You're not on the latest version of Firefox. Upgrade today to get the best of the Web!
Not unusual but when I go to the update site it searches for a minute and then tells me that I have the current version of the software.

If you use the www.google.com/firefox site as home page that previous Firefox 3 versions use as the home page then you can ignore the message about not using the latest Firefox version on that page. 
Google no longer seems to maintain that page. 
Current Firefox 4+ versions no longer use that Google website as the home page, but use the build-in about:home page as the home page. 
Google assumes that you use an older Firefox version if you still visit that site and warns you that you use an older Firefox version and suggests to update. 
You can use another page as the home page like about:home or www.google.com or www.google.com/ig (iGoogle).

I have updated Firefox to 8.0.1 but the main screen still says " You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" What is the problem?

I downloaded Firefox Setup 8.0.1.exe from the website to my desktop and opened it as an administrator. The available choice (once opened) was to upgrade. When the process was complete my version of Firefox was identified as 8.0.1 but the main screen still said - "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!"

This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.

It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

No, since the iPad 2 is iOS 8 compatible it can only be updated to iOS 8. Apple does not support upgrading to interim iOS versions, and removes those files from the servers when a new version is released. The only path for that iPad 2 is iOS 8.0.2.

After the new 10.9.2 Maverick upgrade, my Photosmart C4480 3 in 1 printer can not scan and save the file to desktop or documents. You can only see the image in the print preview area. Does anyone know how to fix this or when a fix will be out?

After Aple support downloaded the new 10.9.2 Maverick upgrade on my MacBook Air, my Photosmart C4480 3 in 1 printer can not scan a document and load the file on to my desktop or document file. (You can see the doc image in the preview but it doesn't save it.) Does anyone know an Apple fix for this or when the fix will be out? After hours of trying reloading, and the usual fixes, etc. Apple told me to call HP, and HP told me they don't support Mac. It does not seem honorable of Apple to put out an upgrade and not tell people it will destroy their scanning ability, and that the only thing to do is to buy another printer/scanner.

Have you tried using Applications/Image Capture to scan.
Vuescan often works.
VueScan
VueScan FAQ

I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I hav

I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I have been using Apple products for years, always touting their reliability and customer service. I am not a techie, I just want to be able to do what I do on the computer and Apple always fulfilled my needs. Now I am told because of some operating system gobbledygook, I have to go out and purchase new software to use Word. This is despicable. I see no particular benefit to using Lion, but I do see a lot of detriments. Apple now seems to have turned into Microsoft, making software obsolete so they can make more money and to **** with the customer. You can be sure that my next computer will be a PC. I have completely lost confidence in Apple.

I seem to never tire of saying this. It was for Apple when they first announced 10.7 to disclose this. Yes, it was widely reported -- or rather, rumored -- but not by Apple. And many people who have gotten caught by this assumed that Apple itself would have told them beforehand about the loss of this very important feature which they had come to rely on. As far as I know, not even in fine print, does this appear anywhere on the Lion announcement or any of its links.
I am not saying Apple had to continue Rosetta in Lion, or forever, just that if it was going to be dropped, it should have been made known.
As relative "insiders" we should not forget that many people don't have the time, habit or interest to do this kind of research. I think it is a breach of trust that Apple has never directly made this announcement or given people the opportunity to decide beforehand if giving up their PPC apps for a new OS is a worthwhile tradeoff.

How do i find the serial # for my cs5.1 upgrade, my new laptop doesn't have a dvd player.

how do i find the serial # for my cs5.1 upgrade. my new laptop doesn't have a dvd player.

Gmavaughn for information on how to locate your serial number please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
You can also download a fresh copy of the Creative Suite 5 installation files at http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html.

HT204368 I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am no

I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens. All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
Is is important to note that I am not the only one experiencing this issue:
This is a link to someone using the Motorola H19txt headset experiencing the same issue
https://forums.motorola.com/posts/94ac15ad7c
If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue. I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web. Hopefully they are already aware, but if not, maybe they will see i here.

here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

I had to upgrade from ios7 to ios8 but it needed more storage than i had so i backed up my phone to my computer then deleted the content on my phone and upgraded to ios8. i have not connect my phone and computer since. how do i get my content back?

i had to upgrade from ios7 to ios8 but it needed more storage i had so i backed up my phone to my computer then deleted the content on my phone and upgraded to ios8. i have not connect my phone and computer since. how do i get my content back?

Restore the backup from your computer

Essentials Connector: The server is not available after upgrade from Windows 8 Pro to Windows 8.1. Pro

Hi all
As many others I am facing also connection problems with Windows Server 2012 Essentials R2 and a windows client pc.
The client pc in question, with windows 8 pro, has been successfully joined through the essentials connector to the domain.
All things went good: media streaming, shared folders, a successfull backup has been started through the essentials launchpad, the client appeared as online in the devices tab of the essentials dashboard.
Then I upgraded the pc to windows 8.1 pro.
Now the client can't connect to the server. Following issues appear:
The client pc is showed as offline the the dashboard when it is online.
Backups (from launchpad or server) aren't possible -> no connection to the windows server essentials adminitration service.
Dashboard not available from launchpad
The message "the server is not available" appears, when I try to reconnect the client by the essentials connector.
BUT:
ping to the server's ip address works.
media streaming is also ok
shared folders are still available.
Any ideas what changed with the upgrade to 8.1 Pro? Is the a firewall problem on the client pc?
Many thanks for your help.
PS. If anyone needs a specific log file from the server or the client, please let me know.

Hi Justin
I executed all you instructions, but nothing helped.
I add here the ClientDeploy.log and the ComputerConnector.log
The ClientDeploy stopps after a registry insert error.
The user executing the connector is member of the Administrators Group on the Client pc.
I started the connector even with "Run as Administrator" but nothing helped.
Any ideas why this registry insert failes?
Thanks for you help and best regards
Hans
[5692] 140604.211748.1774: ClientSetup: Start of ClientDeploy
[5692] 140604.211748.3181: General: Initializing...C:\WINDOWS\system32\Essentials\ClientDeploy.exe
[5692] 140604.211748.3337: ClientSetup: Create client deployment registry subkey if necessary
[5692] 140604.211748.3493: ClientSetup: The initial launching way: -LaunchedFrom:installer
[5692] 140604.211748.3493: ClientSetup: The initial state is set
[5692] 140604.211748.3493: ClientSetup: The initial serverName: 192.168.3.21
[5692] 140604.211748.3493: ClientSetup: Loading Wizard Data
[5692] 140604.211748.3649: ClientSetup: Saving Wizard Data
[5692] 140604.211748.3649: ClientSetup: Current DeploymentStatus=Start
[5692] 140604.211748.7400: ClientSetup: Showing the Client Deployment Wizard
[5692] 140604.211748.8493: ClientSetup: Machine name:PCFA, length:4
[5692] 140604.211748.8650: ClientSetup: The input server name is 192.168.3.21
[2156] 140604.211748.8806: ClientSetup: Entering ConnectorWizardForm.RunTasks
[2156] 140604.211748.8806: ClientSetup: Running Task with Id=ClientDeploy.PreConfiguration
[5692] 140604.211748.8962: ClientSetup: InitWizard, The currrent stage is ConnectingToServer
[5692] 140604.211748.8962: ClientSetup: Set the Deployment Sync Event
[2156] 140604.211748.8962: ClientSetup: The configuration cab will be downloaded from 192.168.3.21
[2156] 140604.211748.9118: ClientSetup: Download file Setup.cab from server
[2156] 140604.211748.9275: ClientSetup: Making web request:
https://192.168.3.21//connect/default.aspx?Get=Setup.cab&LanguageId=1031&64bit=1
[2156] 140604.211748.9743: ClientSetup: Failed to download Setup.cab from server: System.Net.WebException: Die zugrunde liegende Verbindung wurde geschlossen: Für den geschützten SSL/TLS-Kanal konnte keine Vertrauensstellung hergestellt werden.. ---> System.Security.Authentication.AuthenticationException:
Das Remotezertifikat ist laut Validierungsverfahren ungültig.
   bei System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   bei System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   bei System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   bei System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   bei System.Net.ConnectStream.WriteHeaders(Boolean async)
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei System.Net.HttpWebRequest.GetResponse()
   bei Microsoft.WindowsServerSolutions.ClientSetup.CSCommon.DownloadFileFromConnectSite(String outputDirectory, Uri serverUrl, String fileName, Int32 languageId, Boolean is64bit)
[2156] 140604.211748.9743: ClientSetup: Cannot get configuration file with https, will try http...
[2156] 140604.211748.9743: ClientSetup: Download file Setup.cab from server
[2156] 140604.211748.9743: ClientSetup: Making web request:
http://192.168.3.21//connect/default.aspx?Get=Setup.cab&LanguageId=1031&64bit=1
[2156] 140604.211749.0369: ClientSetup: Downloaded file C:\WINDOWS\Temp\ClientDeploymentTempFiles\Setup.cab
[2156] 140604.211749.0369: ClientSetup: The configuration cab is downloaded to C:\WINDOWS\Temp\ClientDeploymentTempFiles\Setup.cab
[2156] 140604.211749.1775: ClientSetup: Adding Server Info data in the Product Registry
[2156] 140604.211749.1931: DnsEnvironmentDetector: GetHostAddresses() returned 192.168.3.21, normal environment
[2156] 140604.211749.1931: ClientSetup: Exiting PreConfigTask.Run()
[2156] 140604.211749.1931: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has TaskStatus=Success
[2156] 140604.211749.1931: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has RebootStatus=NoReboot
[2156] 140604.211749.1931: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5792] 140604.211758.0217: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
[5792] 140604.211758.0373: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5792] 140604.211758.0373: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
[5792] 140604.211758.0373: ClientSetup: Entering InstallRootCertTask.Run
[5792] 140604.211758.0373: ClientSetup: Install root cert to local trusted store
[5792] 140604.211758.0373: ClientSetup: Exiting InstallRootCertTask.Run
[5792] 140604.211758.0373: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
[5792] 140604.211758.0373: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
[5792] 140604.211758.0373: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5792] 140604.211758.0373: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
[5792] 140604.211758.0373: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5792] 140604.211758.0373: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
[5792] 140604.211758.0529: ClientSetup: Entering SetupVpnAndDATask.Run
[5792] 140604.211758.0685: ClientSetup: Deploy VPN profile
[5792] 140604.211758.0998: ClientSetup: Exting SetupVpnAndDATask.Run
[5792] 140604.211758.0998: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
[5792] 140604.211758.0998: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
[5792] 140604.211758.0998: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5792] 140604.211758.0998: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
[5792] 140604.211758.0998: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5792] 140604.211758.0998: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
[5792] 140604.211758.0998: ClientSetup: Entering ValidateUserTask.Run
[5792] 140604.211758.0998: ClientSetup: Validating User
[5792] 140604.211758.0998: ClientSetup: Call MachineIdentityManager.GetMachineStatus
[5792] 140604.211758.1779: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.Security.SecurityNegotiationException: Es konnte keine Vertrauensstellung für den sicheren SSL/TLS-Kanal
mit Autorität mars01:65500 eingerichtet werden. ---> System.Net.WebException: Die zugrunde liegende Verbindung wurde geschlossen: Für den geschützten SSL/TLS-Kanal konnte keine Vertrauensstellung hergestellt werden.. ---> System.Security.Authentication.AuthenticationException:
Das Remotezertifikat ist laut Validierungsverfahren ungültig.
   bei System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   bei System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   bei System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   bei System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   bei System.Net.ConnectStream.WriteHeaders(Boolean async)
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei System.Net.HttpWebRequest.GetResponse()
   bei System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   --- Ende der internen Ausnahmestapelüberwachung ---
Server stack trace:
   bei System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
   bei System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   bei System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   bei System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   bei System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   bei System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   bei System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   bei System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   bei Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.ICertService.GetMachineStatus(GetMachineStatusRequest request)
   bei Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.CertServiceClient.GetMachineStatus(String userName, String password, String machineName, MachineStatus& status, Boolean& isAdmin, Int32& maxClientNum, Int32& currentClientNum)
   bei Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
   bei Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.ValidateUserTask.Run(WizData data)
[5792] 140604.211758.1779: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\ipconfig.exe" /all
[2156] 140604.211758.2092: ClientSetup: Standard Ouptput:
[2156] 140604.211758.2092: ClientSetup: Standard Ouptput: Windows-IP-Konfiguration
[2156] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Hostname . . . . . . . . . . . . : PCFA
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Prim„res DNS-Suffix . . . . . . . : mydomain.local
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Knotentyp . . . . . . . . . . . . : Hybrid
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    IP-Routing aktiviert . . . . . . : Nein
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    WINS-Proxy aktiviert . . . . . . : Nein
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DNS-Suffixsuchliste . . . . . . . : mydomain.local
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Drahtlos-LAN-Adapter LAN-Verbindung* 11:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Medienstatus. . . . . . . . . . . : Medium getrennt
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Virtueller Microsoft-Adapter fr direktes WiFi
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : 16-
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Ethernet-Adapter LAN-Verbindung:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Broadcom NetLink (TM)-Gigabit-Ethernet
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : DC-
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    IPv4-Adresse . . . . . . . . . . : 192.168.2.6(Bevorzugt)
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Subnetzmaske . . . . . . . . . . : 255.255.255.0
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Lease erhalten. . . . . . . . . . : Mittwoch, 4. Juni 2014 18:03:36
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Lease l„uft ab. . . . . . . . . . : Freitag, 6. Juni 2014 20:49:17
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Standardgateway . . . . . . . . . : 192.168.2.1
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP-Server . . . . . . . . . . . : 192.168.2.1
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DNS-Server . . . . . . . . . . . : 192.168.3.21
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
192.168.1.52
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    NetBIOS ber TCP/IP . . . . . . . : Aktiviert
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Drahtlos-LAN-Adapter WiFi:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Medienstatus. . . . . . . . . . . : Medium getrennt
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix: Home
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Qualcomm Atheros AR5B97-Funknetzwerkadapter
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : 94-
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Tunneladapter isatap.{8F57A34A-FE47-429C-97D0-AA777D79C23F}:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Medienstatus. . . . . . . . . . . : Medium getrennt
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : 00-00-00-00-00-00-00-E0
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Nein
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[4504] 140604.211758.2092: ClientSetup: Standard Error:
[5792] 140604.211758.2248: ClientSetup: The exit code of the process (C:\WINDOWS\system32\ipconfig.exe) is: 0
[5792] 140604.211758.2248: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\route.exe" print
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Schnittstellenliste
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   9...16 39 e5 4c c5 f2 ......Virtueller Microsoft-Adapter fr direktes WiFi
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   4...dc 0e a1 06 1f c9 ......Broadcom NetLink (TM)-Gigabit-Ethernet
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   3...94 39 e5 4c c5 f2 ......Qualcomm Atheros AR5B97-Funknetzwerkadapter
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   1...........................Software Loopback Interface 1
[1344] 140604.211758.2404: ClientSetup: Standard Error:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   5...00 00 00 00 00 00 00 e0 Microsoft-ISATAP-Adapter
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: IPv4-Routentabelle
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Aktive Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:      Netzwerkziel    Netzwerkmaske          Gateway    Schnittstelle Metrik
[5792] 140604.211758.2404: ClientSetup: The exit code of the process (C:\WINDOWS\system32\route.exe) is: 0
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:           0.0.0.0          0.0.0.0      192.168.2.1
192.168.2.6     10
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         127.0.0.0        255.0.0.0   Auf Verbindung         127.0.0.1
306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         127.0.0.1 255.255.255.255   Auf Verbindung         127.0.0.1    306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   127.255.255.255 255.255.255.255   Auf Verbindung         127.0.0.1    306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:       192.168.2.0    255.255.255.0   Auf Verbindung       192.168.2.6    266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:       192.168.2.6 255.255.255.255   Auf Verbindung       192.168.2.6    266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:     192.168.2.255 255.255.255.255   Auf Verbindung       192.168.2.6    266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         224.0.0.0        240.0.0.0   Auf Verbindung         127.0.0.1
306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         224.0.0.0        240.0.0.0   Auf Verbindung       192.168.2.6
266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   255.255.255.255 255.255.255.255   Auf Verbindung         127.0.0.1    306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   255.255.255.255 255.255.255.255   Auf Verbindung       192.168.2.6    266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: St„ndige Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   Keine
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
[5792] 140604.211758.2404: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\nslookup.exe" mars01
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: IPv6-Routentabelle
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Aktive Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: If Metrik Netzwerkziel             Gateway
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   1    306 ::1/128                  Auf Verbindung
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   1    306 ff00::/8                 Auf Verbindung
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: St„ndige Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   Keine
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Server: UnKnown
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Address: 192.168.3.21
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Name:    mars01.mydomain.local
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Addresses: 192.168.3.21
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:    192.168.1.131
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:    192.168.4.31
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
[4504] 140604.211758.2560: ClientSetup: Standard Error:
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
[5792] 140604.211758.2560: ClientSetup: The exit code of the process (C:\WINDOWS\system32\nslookup.exe) is: 0
[5792] 140604.211758.2717: ClientSetup: Set CD Fail reason 10 for SQM in ClientDeployment.exe
[5792] 140604.211758.2717: ClientSetup: RecordClientDeploymentFailReason: Save registry failed in ClientDeployment.exe : System.UnauthorizedAccessException: In den Registrierungsschlüssel kann nicht geschrieben werden.
   bei Microsoft.Win32.RegistryKey.EnsureWriteable()
   bei Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions)
   bei Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck)
   bei Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.Helper.RecordClientDeploymentFailReason(UInt32 failReason)
[5792] 140604.211758.2717: ClientSetup: Exiting ValidateUserTask.Run
[5792] 140604.211758.2717: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
[5792] 140604.211758.2717: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[5792] 140604.211758.2717: ClientSetup: Exting ConnectorWizardForm.RunTasks
[06/04/2014 20:23:38 1730] --------------------------------------------------------------------------------------------------
[06/04/2014 20:23:38 1730] wmain: Start of Computerconnector
[06/04/2014 20:23:38 1730] GlobalData::Initialize (192.168.3.10, C:\Users\johndoe.mydomain\Downloads\ComputerConnector(192.168.3.10).exe)
[06/04/2014 20:23:38 1730] =================================
[06/04/2014 20:23:38 1730] Current Os information:
[06/04/2014 20:23:38 1730] Suite = [256]
[06/04/2014 20:23:38 1730] Type = [1]
[06/04/2014 20:23:38 1730] Architecture = [9]
[06/04/2014 20:23:38 1730] IsStarterEdition = [0]
[06/04/2014 20:23:38 1730] IsHomeSku = [0]
[06/04/2014 20:23:38 1730] Major = [6]
[06/04/2014 20:23:38 1730] Minor = [3]
[06/04/2014 20:23:38 1730] Build = [9600]
[06/04/2014 20:23:38 1730] SPMajor = [0]
[06/04/2014 20:23:38 1730] SPMinor = [0]
[06/04/2014 20:23:38 1730] =================================
[06/04/2014 20:23:38 1730] ExpandEnvironmentStrings return (C:\WINDOWS\Temp\ClientDeploymentTempFiles\)
[06/04/2014 20:23:38 1730] SetPackageDlcUrl: .NET url is set to
http://go.microsoft.com/?linkid=9816306
[06/04/2014 20:23:38 1730] SetPackageDlcUrl: Connector url is set to
http://go.microsoft.com/fwlink/p/?LinkId=275102
[06/04/2014 20:23:38 1730] wmain: Calling Computerconnector::ShowWizard()
[06/04/2014 20:23:38 1730] CComputerconnector::ShowWizard: Initializing common controls
[06/04/2014 20:23:38 1730] CComputerconnector::ShowWizard: Done initializing common controls
[06/04/2014 20:23:38 1730] Displaying the wizard
[06/04/2014 20:23:38 1730] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
[06/04/2014 20:23:38 1730] Current user default UI lang setting is 1031
[06/04/2014 20:23:38   c8] CComputerconnector::Run: Installation is ready to run
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die aktuellen Systemanforderungen werden ermittelt... Index= 0
[06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
[06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
[06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
[06/04/2014 20:23:42 1774] Connector installation state is 1
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird heruntergeladen... Index= 1
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird installiert... Index= 2
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Der Connector wird heruntergeladen... Index= 3
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Windows Server Essentials Connector wird installiert... Index= 4
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die Einrichtung von Windows Server Essentials Connector wird gestartet... Index= 5
[06/04/2014 20:23:42 1774] RunShellExecute: ShellExecute [C:\WINDOWS\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.3.10 -LaunchedFrom:installer]
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die aktuellen Systemanforderungen werden ermittelt...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird heruntergeladen...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird installiert...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Der Connector wird heruntergeladen...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Windows Server Essentials Connector wird installiert...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die Einrichtung von Windows Server Essentials Connector wird gestartet...
[06/04/2014 20:23:42 1774] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
[06/04/2014 20:23:43 1774] CComputerconnector::Run: WaitForSingleObject RetVal = 0
[06/04/2014 20:23:43 1730] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
[06/04/2014 20:23:43 1730] wmain: End of Computerconnector: hr=0x0
[06/04/2014 20:54:06 1220] --------------------------------------------------------------------------------------------------
[06/04/2014 20:54:06 1220] wmain: Start of Computerconnector
[06/04/2014 20:54:06 1220] GlobalData::Initialize (192.168.3.10, C:\Users\johndoe.mydomain\Downloads\ComputerConnector(192.168.3.10)(1).exe)
[06/04/2014 20:54:06 1220] =================================
[06/04/2014 20:54:06 1220] Current Os information:
[06/04/2014 20:54:06 1220] Suite = [256]
[06/04/2014 20:54:06 1220] Type = [1]
[06/04/2014 20:54:06 1220] Architecture = [9]
[06/04/2014 20:54:06 1220] IsStarterEdition = [0]
[06/04/2014 20:54:06 1220] IsHomeSku = [0]
[06/04/2014 20:54:06 1220] Major = [6]
[06/04/2014 20:54:06 1220] Minor = [3]
[06/04/2014 20:54:06 1220] Build = [9600]
[06/04/2014 20:54:06 1220] SPMajor = [0]
[06/04/2014 20:54:06 1220] SPMinor = [0]
[06/04/2014 20:54:06 1220] =================================
[06/04/2014 20:54:06 1220] ExpandEnvironmentStrings return (C:\WINDOWS\Temp\ClientDeploymentTempFiles\)
[06/04/2014 20:54:06 1220] SetPackageDlcUrl: .NET url is set to
http://go.microsoft.com/?linkid=9816306
[06/04/2014 20:54:06 1220] SetPackageDlcUrl: Connector url is set to
http://go.microsoft.com/fwlink/p/?LinkId=275102
[06/04/2014 20:54:06 1220] wmain: Calling Computerconnector::ShowWizard()
[06/04/2014 20:54:06 1220] CComputerconnector::ShowWizard: Initializing common controls
[06/04/2014 20:54:06 1220] CComputerconnector::ShowWizard: Done initializing common controls
[06/04/2014 20:54:06 1220] Displaying the wizard
[06/04/2014 20:54:06 1220] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
[06/04/2014 20:54:06 1220] Current user default UI lang setting is 1031
[06/04/2014 20:54:06 1404] CComputerconnector::Run: Installation is ready to run
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die aktuellen Systemanforderungen werden ermittelt... Index= 0
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die aktuellen Systemanforderungen werden ermittelt...
[06/04/2014 20:54:09 e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
[06/04/2014 20:54:09 e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
[06/04/2014 20:54:09 e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
[06/04/2014 20:54:09 e90] Connector installation state is 1
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird heruntergeladen... Index= 1
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird installiert... Index= 2
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Der Connector wird heruntergeladen... Index= 3
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird heruntergeladen...
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Windows Server Essentials Connector wird installiert... Index= 4
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die Einrichtung von Windows Server Essentials Connector wird gestartet... Index= 5
[06/04/2014 20:54:09 e90] RunShellExecute: ShellExecute [C:\WINDOWS\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.3.10 -LaunchedFrom:installer]
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird installiert...
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Der Connector wird heruntergeladen...
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Windows Server Essentials Connector wird installiert...
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die Einrichtung von Windows Server Essentials Connector wird gestartet...
[06/04/2014 20:54:09 e90] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
[06/04/2014 20:54:13 e90] CComputerconnector::Run: WaitForSingleObject RetVal = 0
[06/04/2014 20:54:13 1220] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
[06/04/2014 20:54:13 1220] wmain: End of Computerconnector: hr=0x0

XMP data not showing up in the custom file info panels when upgraded to CC

For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

Is the 3.4 Prescott a worthy UpGrade

Similar Messages

Maybe you are looking for