Is the new MacPro running smoothly with Photoshop?

My current Mac is way too slow, old, etc. to handle the large files that I'm working on. The new MacPro would be great but are there major kinks and glitches that still need to get ironed out?
Thank you!

I don't have a new Mac Pro, but Adobe appears to be working with them and fixing what they find.
In Photoshop 14.2 Adobe enabled taking full advantage of the FirePro GPU in the new Mac Pro (but not both GPUs at the same time, yet).
In Photoshop 14.2.1 Adobe fixed a stability bug related to the Camera Shake Reduction filter on the new Mac Pro.
So it looks like a couple of new Mac Pro issues have already been taken care of.

Similar Messages

  • Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

    Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
    I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
    TIA,
    Jerry

    Thanks, Martin.
    Good to hear someone has had success. The lack of it here is frustrating and depressing.
    Thanks again,
    Jerry

  • Seriously... are display prefs just bad with the new MacPros?

    2010 8Core MacPro with ATI 5870 video card. OS 10.6.5
    This is my second 2010MacPro.. first was was replaced by Apple due to some hardware issue.
    Driving 3 monitors - 1-30" Apple, 2-24" Dell Ultrasharps.
    Using 2 Dual-Link DVI to Mini Display adapters (for the Dells) and plugging the 30" Apple straight into the cards DVI slot.
    NOTHING allows display preferences to be retained after the screensaver goes to sleep. The ONLY way I can get my display preferences to remain is to set the screen saver to run for a couple hours, since i'm usually not away for more than that when working.
    This SAME EXACT OS install worked perfectly in a 2006 MacPro with 2-nVidia 8800GT cards. And I mean EXACT. New 2010MP arrived, I installed everything.. was informed the machine needed to be replaced, I yanked the HDDs and put them into the 2006MP and booted right up, no issues. Replacement 2010MP arrived, I pulled HDDS for the 2006MP and put them back into the new 2010MP.
    Is anyone else finding it difficult to maintain display preference settings on the new MacPros if your'e driving 3 monitors?
    Thanks

    As Mac OS X is a Multi-User system, and your user_id could (in certain configurations) be associated with a multitude of displays on a multitude of Macs, those preferences are found in unusual places.
    Most are in your Home Directory. If the permissions on your Home Directory are damaged, so that you do not have write access to some of these folders:
    <your_home> > Library > Preferences
    <your_home> > Library > Preferences > ByHost
    and files with names like:
    com.apple.preference.displays.plist AND
    com.apple.preference.displays.<M.A.C. Address of this computer>.plist
    you may not be able to store your settings.
    The general test is to create a new User account, and see if the problem recurs with a Brand new User account.
    One broad preventative maintenance step is to Repair Permissions.

  • My macpro runs slow with or without internet on..... How can I find out if something is running in the background?

    my macpro runs slow with or without internet on..... How can I find out if something is running in the background?

    Please boot in safe mode and test. Still slow? If you connect to a wireless network, you may have to connect with Ethernet in safe mode.
    After testing, reboot as usual (not in safe mode.)
    Mac OS X: Starting up in Safe Mode

  • Will LR5 benefit of graphic cards acceleration with the new MacPro ?

    Will LR5 benefit of graphic cards acceleration with the new MacPro ?

    Well, although LR5 is a great improvement of speed, the dev. team should try to work on MF files such as from the Pentax 645D… any speed improvement would be much appreciated, especially with dust removal and masking tools.
    My actual configuration is not so bad, but I can't see how to get more speed from it :
    MacPro 2 x 2,8 GHz Quad-Core Intel Xeon
    RAM 18 Gb 800 MHz DDR2 FB-DIMM (2x1 + 2x2 + 2x3 + 2x4)
    Mac OS X 10.9.1
    ATI Radeon HD 2600 XT
    ATI Radeon HD 5870 1024 MB
    SSD Boot disk: SAMSUNG MMDOE56G5MXP-0VB - 256 Gb
    Working Disk  : 2 x Western Digital 3,5´´ S-ATA III 6 Gb/s Disque dur Caviar Green (WD30EZRX) - 7200 RPM, 64 Mo - Mounted RAID 0 - 6 Tb

  • Will the New MaPro running Maveriks do a select boot from an external HD of older OSX versions?

    Hi...
    I was wondering if the new MacPro will do an Option selective boot of an external HD bootable backup made using SuperDuper?  The drive would be a FW800 external connected via adaptor as the nMP has nonly TB and USB 3 ports.

    As shipped, the new MacPro late 2103 will boot ONLY from the software it shipped with, or a re-load of the software it shipped with. Nothing older.
    You may be able to install and fiddle with Virtualization software to get an older version to run under a Hypervisor, but it will be some work.

  • How can I get my games to run smooth with apple tv. I'm getting jerky movement

    How can I get my games to run smooth with apple tv?

    Check your network for interference (www.istumbler.net, check router manual in regards to changing channels) and other activities possibly running in the background.

  • When I zoom in to see all the details of a photograph with photoshop elements 8 the photo become pix

    When I zoom in to see all the details of a photograph with photoshop elements 8 the photo become pixelated.  is there a way I can anti alias the photo after I blow it up?

    Hi ,
    Anti- alisa feature only available to text layers not image layers.
    you can add blur to make it smooth (if image has not too much details ).
    thanks,

  • I've read that Promise Pegasus2 series does not sell replacement parts. I'm buying the new MacPro but am concerned about spending $2K for storage that may break and cannot be fixed. What are others buying for storage for the new MacPro?

    I've read that Promise Pegasus2 R6 thunderbolt 2 series does not sell replacement parts (no replacement parts for any of the Pegasus line). I'm buying the new MacPro but am concerned about spending $2K for storage (12tb version) that may break and cannot be fixed (am told that one must purchase a new unit if a part breaks). What are others buying for storage for the new MacPro? Thanks so much for your help.
    Discussion about this issue at MacWorld.com:  http://www.macworld.com/article/2082783/first-look-promises-pegasus2-r6-thunderb olt-2-raid-array.html

    I've used the original Pegasus R6 units for a couple of years now and have been very pleased with them.  On the two occasions I've had to call on their technical sujpport, I've found them readily available, knowledgeable, and very helpful.  In one case it involved the reset of a unit after a power failure at an inopportune time; in the other case it was a question about upgrading disk drives to higher capacities (1 Gb gto 4 Gb).  I was pleased to learn that their tech support people were in California and as good if not better than upper-tier AppleCare reps. The hardware itself has functioned flawlessly so far.

  • TS1363 Just installed the new ITunes (running Windows 7) and now it cant see my IPhone

    Just installed the new ITunes (running Windows 7) and now it cant see my IPhone (which it saw fine just a few minutes ago). So I can't do a backup etc. What's wrong and how do I put it right?

    Well, without my doing anything, the situation has now righted itself. I came down this morning, switched on the computer and the IPhone - and now ITunes recognises the IPhone (it is listed under "Devices", which it wasn't before)
    I notice however that the IPhone doesn't get listed under "Devices" until the backup process is complete. So maybe this points to what may have been going on before? Except that the reason I was worried was because the first thing I wanted to do after dowloading the new version of ITunes is make a backup - and I couldn't because ITunes didn't "see" the phone.
    Anyway, not the first time I have had the eerie feeling that my relationship with IWorld is not in my control.

  • In a Google search, clicking on a search result causes the new page to open with the search terms highlighted in yellow -- how can I turn off th

    In a Google search within a Firefox session, clicking on a search result causes the new page to open with the search terms highlighted in yellow -- how can I turn off this highlighting?

    Try to clear the Google cookies and redo those Google options.
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • Using the new 160gb Ipod Classic with my Alpine ida-x001

    just wondering if anyone knows if the new Classic will work with my Alpine iDA-X001 head unit in USB mode? Did apple change anything in the disk mode that would make it not work? I could really use the extra room over my 80gb 5.5g, apple lossless takes a lot of room

    According to this thread, it works
    http://forums.ilounge.com/showthread.php?t=204971
    Let us know how it works for you. I'd like the 160GB so I can use my lossless collection as well.

  • Has anyone tried syncing the new iPod Touch 4 with OS 10.4.11?

    I know the "official" Apple spec's state the new iPod Touch 4 are
    for it to sync with OS 10.5.8 and use iTunes 10 .... but has anyone been
    successful in using the new iPod Touch 4 with OS 10.4.11 and iTunes 9.2.1?

    Does iTunes see the iPod? If not
    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    You need iTunes 10.7 or later on the computer
    The iPod touch uses different drivers than the Nano

  • I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

    I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

    NicholasLiban -
       When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process.  This provides a complete install of the very latest version of Lion, including the recovery partition.  The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple. 
       - Randy

  • Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    stephan ach wrote:
    but i read that there are lots of problems with the new macbook pro. i  have all my data on ext. la cie hard drive. i wont have a problem reading them?
    What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
    External USB devices including hard drives and DVD work fine on the new Macbook Pros.

Maybe you are looking for

  • Unable to Schedule BIP report in OBIEE 11g

    Hi all, When we schedule a BIP report from our new Production Environment(11.1.1.6.6) , we are getting the below error in output Document generation failed [INSTANCE_ID=pxprhlwcobia05.wyn.wyndhamworldwide.com.1362571918550] [OUTPUT_ID=1202]/tmp/bip54

  • Problems copying and pasting a head from one photo onto a body of another photo

    I used the magnetic lasso tool in PSE8 to trace around the head and then copied it from the edit menu.  Opened the new photo with the body I wanted and pasted the head into the photo.  Instead of just the head, a white margin was around the head and

  • Manipulate Frequency Data

    I'm reading in sound data, getting the FFT and displaying the data - frequency Vs.. Magnitude. I wish to set certain frequency bands to zero. The output data type following the FFT (PS/PSD VI) is a cluster of 3 elements, fo, df and magnitude (1-D arr

  • Abend 1 happens about every 15 days

    I tried figuring this out, but abends seem to be really close, and yet different. Seems like you have to be really knowledgable to really understand these logs. This server runs all the GW agents (ie Doc, WebAccess, etc) and GWAVA4. It has been runni

  • Decoding 2D barcode on forms printed from Adobe Reader

    We use LiveCycle Designer 8 in Adobe Acrobat 8 Pro to create forms, which are then opened, completed and printed using Adobe Reader, then signed by the user and mailed back. We believe we can put a 2D paper forms barcode on the form, but if filled in