Is the QT JPEG2000 implementation lossless or not?
When exporting from quicktime with the depth set to "millions of colors+" and the quality slider set to "best", is Apple's implementation of JPEG2000 completely mathematically lossless?
Or is it only visually lossless?
I need to find documentation that proves we can use Quicktime's JPEG2000 to losslessly compress government video records. Lossy compression is not an option and there are many records so compression is mandatory where possible.
Has anyone been down this path before or can point to where I can find the documentation? I have searched the forums and the www but cannot find anything concrete.
Thanks in advance...
Firstly I truly appreciate all of your responses and the time you took to research them.
I take it there is no documentation available for the quicktime implementation of the JPEG 2000 codec? I could not find any either.
The specific answers I need in written documentation for a government report are this:
Is the JPEG 2000 implementation in quicktime consistent with the Motion JPEG 2000 (often referenced as MJ2 or MJP2)? It is an open ISO standard and does not employ temporal or inter-frame compression. Each frame is an independent entity encoded by either a lossy or lossless variant of JPEG 2000.
As highlighted earlier I am specifically interested in LOSSLESS compression.
Thanks again for your responses David, Klaus and Kirk but:
David your statement "I would say since the codec uses the name jpeg that it's lossy." is mostly true but this isn't always the case, please see below. Again I am looking for where the documentation is located, so I can PROVE what you are saying is correct or not.
Klaus I disagree with your statement "No jpeg compression is lossless" and one of the reference links you gave "http://en.wikipedia.org/wiki/JPEG_2000" also contradicts that statement. That is unless you specifically mean the Quicktime implementation and not jpeg in general. This is exactly the information I am trying to discern but I need documentation to substantiate it.
Kirk "Any export could introduce additional compression of your source format." This is true but not so if I export uncompressed video as uncompressed video for example. If you can point to where the documentation says the Quicktime implementation of "JPEG 2000 is an "image" format (not a video compression codec)" I would love to see it, otherwise it is just an opinion - albeit a good and very likely correct one!!!
Being a mac fanboy I WANT to employ quicktime JPEG 2000 but unless I can PROVE with documented evidence QT JPEG2000 IS lossless for government archival use, my hands are tied.
An example of a company that does use JPEG2000 lossless today is Samma Systems: http://www.sammasystems.com/
Is there written documentation that Apple's implementation of JPEG2000 is mathematically lossless or is it only visually lossless?
Apple??? ISO??? Anyone???
Similar Messages
-
Creating the BAdI implementation: se19(OSS note )
Hi Experts,
I have to apply a Note 1330434 ( FBL5N: Performance improvement by changed selection.) in our ECC.6.0.
The 1330434 note says,
Solution
When you implement a new BAdI in the line item display, the selection logic can be optimized. The system only reads the clarification case attributes for the line items that are also displayed.
Import the specified Support Package.
To implement the correction instructions manually, proceed as follows:
1...
2. Implement the corrections in accordance with the correction instructions.
3. Creating the BAdI implementation:
Call transaction: SE19.
Under "Create Implementation", choose "Classic BAdI".
BAdI name: FI_ITEMS_CH_DATA
Implementation name: FDM_AR_ITEM_ATTR_GET
Implementation short text: FSCM-DM: Selection of attributes in FBL5N
Activate the implementation.
How to do the third step --> .."3. Creating the BAdI implementation: " ?
when I go to se19,
Under "Create Implementation", choose "Classic BAdI"... give FI_ITEMS_CH_DATA or FDM_AR_ITEM_ATTR_GET
and then press button 'create impl.'
then it says "Badi definition FI_ITEMS_CH_DATA does not exist."
I struck up at 3rd part of the note (BADI creation/implementation part of the note.).
Please suggest me how to apply this Badi part of the note ?
YOUR HELP WILL BE HIGHLY APPRECIATED!
Thanks in advance.
Edited by: sam kumar on Jul 22, 2009 12:22 AMAre you sure this note is for your system. I am also working in ECC6. I checked but I couldn't find the defibition too. Make sure note is for your component version and if it is report this problem to OSS.
Edited by: Gungor Ozcelebi on Jul 22, 2009 8:37 AM -
How to implement an OSS Note if you only know the key??
Hi,
I wanted to know if we can implement an OSS NOte if we only know the SSCR key.
Any help will be appreciated.Hi,
You can implement an OSS note through transaction SNOTE.
Just download the OSS note from SNOTE and it will automatically be inserted in the standard code.
If you are not able to download the note check for the note correction given.
Implement the note correction in the standard program after getting access key.
Regards,
Subhashini -
When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?
babowa wrote:
If you do not lock that folder immediately after deleting all the contents, it will simply populate again (Resume - a "feature" in Lion). You do that by doing a Get Info (highlight folder and press Command + I keys), unlock the lock at the bottom, enter your admin password, then check the box to lock the folder. lock the lock and you're done.
Yes, that is correct. The alternative is to quit all applications prior to logging out. Lion will then have a chance to remove the saved states.
babowa also wrote:
And, for the OP:
It has also been a regular feature of Mac OS to automatically open any window that was open at shutdown. To avoit that behavior, simply close any Finder windows and properly quit applications by closing their window and using Command + Q (or File >Quit).
This was true only for the Finder. Prior to Lion, no other apps would launch unless they were included in the Login Items for the account. And the OS would not restore windows for other apps.
A very small number of apps (TextWrangler is an example) implemented this capability prior to Lion. They could restore previously opened windows. But that is an application feature, and can be controlled by the application's preferences. Lion implements it at the system level, and users have virtually no control on a per application basis. -
How can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?
Hello, all,
how can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?
E.g. I want to implement a top-down-planning scenario and I have the following hierarchy:
Europe
Germany
France
UK
Spain
Italy
How can I enter a value on Europe in an input schedule in order to allocate this value afterwards?
Thanks in advance and best regards
GerdGerd,
It should be something like below -
EuropeInput
Europe
Germany
France
UK
Spain
Italy
EuropeInput shall be kept out of hierarchy and should be a base level member. Users will enter the numbers in this member. In your script logic, you will make use of this member to allocate the data in Bas(Europe) i.e. Germany, France, etc.
Effectively, after allocation the same data will be rolled up to Europe.
Many top-down planning would use such work-around as BPC doesn't allow writing to parent node.
Regards,
Ashish -
I would like some help in determining the proper structure/implementation
I would like some help in determining the proper structure/implementation for the following scenario:
I have ~10 steel rods that have been equipped with a strain gauge. The most I would have is ~30 steel rods.
Each setup has had a 10 point calibration done.
These steel rod/strain gauge setups are assigned a calibration number.
The data would be grouped for each steel rod and identified by the calibration number.
I would like to use that calibration data to determine the Young’s Modulus for each steel rod and store that within the specific rod’s information.
I want the user to be able to add new steel rods dynamically and the Young’s Modulus calculated and stored with it.
There are two different types of rods.
The cross-sectional area of the rod needs to be stored and that value is constant based on the rod type (so there are two different area values).
After a rod’s calibration data is entered the first time, the data should be static so it doesn’t need to be re-entered.
The user would enter the cal#, the 10 point calibration data, and the rod type.
The user will only see the steel rod cal# on the FP.
I am using a queue-based producer/consumer with event structure for the front panel interface. So I’m thinking whenever a rod cal# was added I would call a subvi where the calibration data can be entered and then the Young’s Modulus could be calculated and stored. An option to edit/review existing cal data should be available.
LabVIEW 2010, Win 7.
My initial idea was:
Rod Arr – array of clusters:
Rod Info - cluster:
Calibration number – string
Rod Scale cluster:
mV/V – double array
force – double array
Young’s Modulus – double
Rod type – enum
Cross-sectional area – double
I have not implemented this because I’m not sure how to implement that AND keep the data after it’s been entered. And all of the bundling/unbundling anytime I want to access/edit any rod information can be BD consuming. I thought a lookup table might work. When I looked on the forums for a lookup table I was pointed in the direction of arrays/clusters.
So I have two questions:
What would be the best structure for the steel rod data?
What would be the best data type for the calibration# that the user can edit (enum, ring, ?)?I would make a couple of small change to your proposed data layout (highlighted in blue):
Rod Arr – array of clusters:
Rod Info - cluster:
Calibration number – string
Array of Rod Scale cluster:
mV/V – double
force – double
Young’s Modulus – double
Rod type – enum
Cross-sectional area – double
For the calibration data, I would have an array of clusters rather than a cluster of arrays. IMHO, this makes it easier to index through the calibration points, and makes it less likely you will ever have a situation where you don't have the same number of mV/V and force points. I'd also move the Young's modulus, type, and area info into the Rod Info cluster.
I prefer to store this type of configuration in the system registry, but that is more complicated and far from universal in the LabVIEW world. A simpler way would be to simply pass the entire array to the "write to binary file" function. If you do this, however, you might want to add a version number, otherwise it will be very difficult to maintain backwards compatibility if you ever need to change the data structure.
As far as the control type, it depends on what the user is entering. If the user is mostly entering calibration numbers already in the system, I would use a (system) combo box. This allows the user to select an existing calibration number from the menu, but also to enter a new calibration number if they need to. If the user will almost always enter new calibration numbers, then I would use a standard string control. Either way, you'll probably want to validate the format of the number the user enters.
Mark Moss
Electrical Validation Engineer
GHSP -
While installing sql server 2012 with failover clustering I got the following error:
The cluster resource 'SQL Server' could not be brought online. Error: There was a failure to call cluster code from a provider. Exception message: Generic failure. Status code: 5942. Description: The resource failed to come online due to the failure of one
or more provider resources.
The two nodes of the sql server failover have been successfully prepared. The error came while running the advance cluster completion option.
In the clustered events in failover cluster manager the following message is displayed:
Cluster resource 'SQL Network Name (CPCTestSQLClus)' of type 'Network name' in clustered role 'SQL Server (MSSQLSERVER)' failed.
I have done various checking and the issue remained. I tried to start the sqlPlease find below part of the content of the cluster log. I hope this is helpful in resolving the issue:
00000998.000010e8::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online called for resource SQL Network Name (CPCTestSQLClus)
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 997/0.
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlineCallIssued -> OnlinePending( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlineCallIssued-->OnlinePending.
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Online thread
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Initializing config info
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Skipping initialization of 'Identity' module because netname is not yet created
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual online of resource.
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Obtaining IP info for resource SQL IP Address 1 (CPCTestSQLClus)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Using provider SQL IP Address 1 (CPCTestSQLClus), ip address 10.144.166.160, mask 255.255.255.0, prefix length 24
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Resource has 1 IPs
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: IP: Type Ipv4, Address 10.144.166.160:~0~, Prefix 10.144.166.160/24, Online true, Transport \Device\NetBt_If3
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Offline
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Calling initialize of the configuration implementation
000005a4.00001350::2013/05/08-20:45:00.248 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Creating a New AD NetName (type Singleton)...
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Closing
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Initializing Name: CPCTestSQLClus, NetbiosName: CPCTESTSQLCLUS, Type: Singleton, Created: false
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: [NNLIB] GetCreatingDC - name CPCTestSQLClus, lookup flags = 1
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NNLIB] GetDCWithFlags - using DC
\\MY01DC03.Domain.net, domain name Domain.net, IsReadOnly 0, Object exists 0
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NN] Setting crypto access members for encrypt. New container = false.
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: Agent: Sending request Netname/LastDcChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.452 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: LastDc Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting last DC in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: LastDc Changed (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: Agent: Sending request Netname/PasswordChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Password Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.468 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting password in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: PasswordChanged (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.00000ab8::2013/05/08-20:45:00.636 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.647 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.0000075c::2013/05/08-20:45:00.784 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OU name for VCO is OU=NewComputers,OU=WORKSTATIONS,DC=Domain,DC=net
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name: Agent: Sending request Netname/GetToken to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Identity
00000998.00000ab8::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Module is not yet initialized. Trying to obtain a new token.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining new token
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain Domain.net
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] PopulateKerbKDCLookupCache - DC flags 0
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 94, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain label Domain
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 86, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:01.018 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 0)
00000998.0000075c::2013/05/08-20:45:01.096 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 1)
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NNLIB] Logon failed for user CPCTestWinClus$ (Error 1326), DC
\\MY01DC02.Domain.net, domain Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining Windows Token for Name: CPCTestWinClus, SamName: CPCTestWinClus$, Type: Singleton, Result: 1326, LastDC:
\\MY01DC02.Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Slow Operation, FinishWithReply: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: InternalReplyHandler with event: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: End of Slow Operation, state: Error/Idle, prevWorkState: Idle
00000998.00000ab8::2013/05/08-20:45:01.096 WARN [RES] Network Name <Cluster Name>: Identity: Get Token Request, currently doesnt have a token!
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: End of Slow Operation, state: Initializing/Writing, prevWorkState: Writing
00000998.000010e8::2013/05/08-20:45:01.096 WARN [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Slow operation has exception ERROR_INVALID_HANDLE(6)' because of '::ImpersonateLoggedOnUser( GetToken() )'
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD): 6
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: InitializeReplyCreation of NetName (type Singleton), result: 6, IsCanceled: false
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Deleting ResourceData, CreatingDC, ObjectGUID for a newly created netname from cluster database
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration): 6
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 6
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: PerformOnline - Initialization of Configuration module finished with result: 6
00000998.000012f0::2013/05/08-20:45:01.112 ERR [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online thread Failed: ERROR_SUCCESS(0)' because of 'Initializing netname configuration for SQL Network Name (CPCTestSQLClus) failed with
error 6.'
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: All resources offline. Cleaning up.
00000998.000012f0::2013/05/08-20:45:01.112 ERR [RHS] Online for resource SQL Network Name (CPCTestSQLClus) failed.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 5018/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlinePending -> ProcessingFailure( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlinePending-->ProcessingFailure.
000005a4.0000050c::2013/05/08-20:45:01.112 ERR [RCM] rcm::RcmResource::HandleFailure: (SQL Network Name (CPCTestSQLClus))
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] resource SQL Network Name (CPCTestSQLClus): failure count: 6, restartAction: 2 persistentState: 1.
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Greater than restartPeriod time has elapsed since first failure of SQL Network Name (CPCTestSQLClus), resetting failureTime and failureCount.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Will queue immediate restart (500 milliseconds) of SQL Network Name (CPCTestSQLClus) after terminate is complete.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): ProcessingFailure -> WaitingToTerminate( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) ProcessingFailure-->[WaitingToTerminate to DelayRestartingResource].
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [WaitingToTerminate to DelayRestartingResource] -> Terminating( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [WaitingToTerminate to DelayRestartingResource]-->[Terminating to DelayRestartingResource].
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Terminate called for resource SQL Network Name (CPCTestSQLClus)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Offline thread
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual offline of resource.
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AdminShare
00000998.000010e8::2013/05/08-20:45:01.112 ERR [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AdminShare: OnCloseBase, Error Already Closing, previous state: Closing/Ending
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare) result: 1904
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 1904
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Canceling work, state: Closing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: OnCloseBase, previous state: Initializing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closing... (PreviousState: Initializing, Created: false, Type: Singleton)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Canceling work, state: Closing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OnCloseBase, previous state: Initializing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Finish Closing NetName (type Singleton) Module AccountAD, result 0, remaining... 0 (0)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- listing 3 instances ---------------------------------------------
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 082d8ef5-62a8-4fee-acbc-e89b769e9181:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closed
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 43dec41b-661c-42a8-ae23-b635d7ab11f5:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: c03fb105-9a50-4d00-8bee-afaf693f7efc:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Initializing/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Error/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Initialized/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- 0 Zombie modules
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(7) result 0/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [Terminating to DelayRestartingResource] -> DelayRestartingResource( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] Queueing immediate delay restart of resource SQL Network Name (CPCTestSQLClus) in 500 ms.
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.143 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.252 INFO [RES] Network Name: Agent: Sending request Netname/RecheckConfig to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Netbios
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: Slow Operation, FinishWithReply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: End of Slow Operation, state: Initialized/Idle, prevWorkState: Idle -
Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values
Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank youMy programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi -
Why the creation of a infotype is not traced by infotype change log report?
Hello Experts,
I triggered the trace of IT655 change for infotype auditing report RPUAUD00. But I found out if just create the infotype with a certain start date without changing any field, this creation cannot be picked up by the report. Is this normal or not? What else I can do to trace the creation also?
Thanks,
AllanAllan - We are having a similar issue with Events (0000) infotype? Did you apply note 44206 in your system?
If you applied the note, did the developer implement the changes to the 2 Standard SAP programs (per note 44206)?
If you didn't apply the note, how did you resolve the issue of the trace within the infotype?
Any response is appreciated. -
Why we go for SAP ?what are the benifits to implement SAP inanyorganizat?
Hi,
Why we go for SAP ?what are the benifits to implement SAP in any organization?
Early reply is highely appruciable.
Regards,
Chow.Hi
check following link for ur doubts
http://www.sap.com/solutions/business-suite/erp/businessbenefits/index.epx
Some key points to switch to SAP is like
Focus on Business Processes
Elimination of Redundant Data (Common & Consistent Data)
Easier Corporate Consolidation
Better Managerial Control
Elimination of Interfaces
Faster reaction to changing structures
Organization/Customers/Competitors
Integration is the Key
Integration of all business modules
Major reduction in time required for accounts finalization
Easier Corporate Consolidation
Cost control Batch wise / Cost centre wise
Centralised Inventory planning and control
Reduction in Inventory carrying Costs
Best Business practices across the organisation
Elimination of redundant data
Better Managerial control
Data Integrity
Enhanced Organisational flexibility
Improvement in Personal productivity
High Data availability
Improved Order cycle time / accuracy / cost
hope this is what ur looking for
If not pls revert
Vishal... -
ORA-29829: implementation type does not exist
Hello,
I get ORA-29829: implementation type does not exist when creating an external table in
Oracle 10g 10.2.0.3.0. Anyone knows why this happens?
Wrote file afiedt.buf
1 CREATE TABLE tim
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATA_PUMP
5 DEFAULT DIRECTORY tim_dir
6 LOCATION ('tim.dmp')
7 )
8* AS SELECT * FROM dba_tables
AB0318@ditoa1> /
CREATE TABLE tim
ERROR at line 1:
ORA-29829: implementation type does not exist
AB0318@ditoa1> select * from V$OPTION;
PARAMETER VALUE
================================================================ ===================================
Objects TRUE
Regards,
TimORA-29829: implementation type does not exist
Cause: The implementation type specified with USING clause could not be found.
Action: Check to see if the type exists and the user has EXECUTE privilege on this type. -
Some of the services of ITS 640 are not working
Hi All,
I have implemented SAP NW 04 SR 1 Portal and integrated SRM 4.0(EBP 5.0).I have also implemented Business Package for mySAP SRM 4.0 60.2.
I am using internal ITS for HTML GUI.
Some of the iviews of the business packages are working but some of them are not.
I am getting an error message
"The URL http://g4kwas642.corp.rwdtech.com:8050/sap/bc/gui/sap/its/bbpsc05/! was not called due to an error.
Note
The following error text was processed in the system SRM : Attribute for user PBHONDELE contains errors. Inform system admin.
The error occurred on the application server g4kwas642_SRM_50 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS"
I have published all the services that are under SICF.
I had also published all the services using w3_publish_services and siac_publish_all_int.
It says that all the services are succesfully published.
When I go to SICf to test the service,some of them are not working.
Can you guys tell me what are the steps that I am missing?
Thanks,
ParitoshI am also getting the same th_res_free error..
I have installed nw04 sr1 and trying to run ESS on it.
My problem is, i have installed sap WAS 6.4 on different machine and R/3 on different machine..
So now.. where i have WAS.. does not have all the services. All services are there on R/3 server..
Now how do i publish the services on WAS 6.4??
Coz that option to publish on INTERNAL site is not coming on my R/3 (4.7) as it does not have WAS 6.4.. its on different machine.
Please tell me what can be done in this case.
I cant create a R/3 transaction iView using webgui because of this. my Web gui service on WAS 6.4 runs fine whne i test it in SICF .. but not in Iview..
Please help me out .. i dont want to install a ITS on another machine which is simple solution.. -
The stock in transit field is not visible in MD04
Hi Team
Stock in transit visible on MD04
STPO 28801084 is internal stock transfer from FI25 to FI28.
Qty of PO is visible in the ´stock in transit´ field on SAO transaction MD04 under plant FI28
when corresponding delivery 1202400481 have been PGId at FI25 (2014/07/07)
Stock in transit NOT visible on MD04
STPO 28502250 is internal stock transfer from FI31 to FI28.
The ´stock in transit´ Qty of PO is not visible on MD04 under plant FI28.
even if the corresponding delivery 1202323564 have been PGId at FI31 (2014/06/23)
Br, Kiran UndeHello
Please take a look on question 9 of the following FAQ note, which explains the standard system behavior:
549752 - FAQ: MRP elements in transaction MD04/MD05
9. Question: Why does the system not display stock in transit for stock
transport orders with order confirmation (notified orders)?
Answer:
Purchase order confirmations do not have to match the original
purchase order delivery schedule lines. Moreover, the purchase order
confirmation (view MDLA in materials planning) does not contain the
same information as the purchase order to determine the stock in
transit. The display of the stock in transit is therefore not
implemented for the purchase order confirmation in the materials
planning evaluation transactions.
BR
Caetano -
Getting Error in AppPart "The feed you've requested does not exist."
I am getting " The feed you've requested does not exist." Error while app-part is getting loaded on
a page. It works well while we open the app alone. The feed we are using is Yammer feed.
Ashish Baranwal || To know what you know and what you do not know, that is true knowledgeIssue confirmed and addressed by MS. From the O365 portal:
Closure Summary: On Wednesday, September 24, 2014, at approximately 6:40 PM UTC, engineers identified an issue in which some customers may have been unable to use the embed feature in Yammer. The investigation determined that a small portion of infrastructure
which processes authentication was degraded. Engineers implemented a fix which remediated end-user impact. The issue was successfully fixed on Wednesday, September 24, 2014, at 8:50 PM UTC. Upon analysis of the incident, service impact was determined to be
limited. Next steps have been identified and will be implemented to ensure that the issue does not reoccur. Please consider this Closure Summary the final update on the event.
Our feeds are working now. -
How to know side effects of implementing an SAP Note
Hi All,
Im new in implementing SAP Note.
Kindly suggest how to analyize whether implementing an SAP Note will cause some side effect.
How to do that ,I think just by looking at code can we assure that there will be no side effects.
Kindly suggest.hello,
the easiest way is to implement note and check the functionality manually for example execute transaction and post document or you could open the correction object (ABAP code) and analyse the correction which ll be imported and how those changes will effect your systems work. if you implemented the note and you noticed that corrections destroyed your previous functionality then you could rollback the note in your development system.
best regards
dez_
Maybe you are looking for
-
Asm instances on single system
Hi , How many ASM instance can reside on one single machine.....
-
Receiver File Adapter J2SE Adapter Engine
Hi, We have configured a receiver file adapter on a J2SE adapter engine through the administrator page of the J2SE adapter. XI.httpPort=8222 XI.httpService=/file/Receive and the rest of the adapter parameters. I have configured a channel in ID as XI
-
Hi I have downloaded the new itunes 12.01 - since then I have had nothing but trouble with my Zepplin Air. Now I cant remotely change the volume control on it, only being able to change it on my connect
-
How can I get my songs on my ipod mini to my new computer Itunes?
How can I get my songs on my ipod mini to my new computer's Itunes library. hp Windows XP
-
Using logical operators when creating software groups
Is there a way to use simple logical operators when using filters for creating software groups? An example of what I want to do is to select all updates for the past month - but not include Definition Updates for instance. So all update classificatio