Creating the BAdI implementation: se19(OSS note )

Hi Experts,
I have to apply a Note 1330434 ( FBL5N: Performance improvement by changed selection.) in our ECC.6.0.
The 1330434 note says,
Solution
When you implement a new BAdI in the line item display, the selection logic can be optimized. The system only reads the clarification case attributes for the line items that are also displayed.
Import the specified Support Package.
To implement the correction instructions manually, proceed as follows:
1...
2. Implement the corrections in accordance with the correction instructions.
3. Creating the BAdI implementation:
Call transaction: SE19.
Under "Create Implementation", choose "Classic BAdI".
BAdI name: FI_ITEMS_CH_DATA
Implementation name: FDM_AR_ITEM_ATTR_GET
Implementation short text: FSCM-DM: Selection of attributes in FBL5N
Activate the implementation.
How to do the third step --> .."3. Creating the BAdI implementation: " ?
when I go to se19,
Under "Create Implementation", choose "Classic BAdI"... give FI_ITEMS_CH_DATA or FDM_AR_ITEM_ATTR_GET
and then press button 'create impl.'
then it says "Badi definition FI_ITEMS_CH_DATA does not exist."
I struck up at 3rd part of the note (BADI creation/implementation part of the note.).
Please suggest me how to apply this Badi part of the note ?
YOUR HELP WILL BE HIGHLY APPRECIATED!
Thanks in advance.
Edited by: sam kumar on Jul 22, 2009 12:22 AM

Are you sure this note is for your system. I am also working in ECC6. I checked but I couldn't find the defibition too. Make sure note is for your component version and if it is report this problem to OSS.
Edited by: Gungor Ozcelebi on Jul 22, 2009 8:37 AM

Similar Messages

How to implement an OSS Note if you only know the key??

Hi,
I wanted to know if we can implement an OSS NOte if we only know the SSCR key.
Any help will be appreciated.

Hi,
You can implement an OSS note through transaction SNOTE.
Just download the OSS note from SNOTE and it will automatically be inserted in the standard code.
If you are not able to download the note check for the note correction given.
Implement the note correction in the standard program after getting access key.
Regards,
Subhashini

BADI implementation for NOTIF_EVENT_POST not getting triggered

Hi All,
We have created an implementaion for the NOTIF_EVENT_POST. And it was working fine previously. Now it is not working for some reason. In fact issue is that the implemetation is not getting triggerd at all. I have put a BREAK-POINT statement in the code, but does not even goes into the code.
I have checked all the properties. It is active. The table V_EXT_IMP has a entry corresponding to the BADI definition and implementation.
I tried to debug the standard transaction IW52 (which uses this). The program runs till the FM call for CL_EXITHANDLER=>GET_INSTANCE. It created a instance also. But it does not get inside the call for the method of the BADI LR_BADI_INST->CHECK_DATA_AT_POST.
I am at a fix now. Can somebody answer this issue? It would be very helpful.
Regards
Barada.
Edited by: Baradakanta Swain on Aug 5, 2008 4:06 PM

I did not get the issue with the BADI implementation. But as our time line was very tight, we moved the code to BTE event for Updating Notifications.
This required a little tweaking of the code and now it is working.
I am marking it ANSWERED so as to remove it from the list of unanswered questions.
Regards
Barada

The time when the BADI implementation class really initialize.

when I debug the cl_exithanler=>get_instance, I found that it returns the class name as: CL_IM_EX..., not the implementation class name begin with: ZCL_IM... which is created by me. So when does the BADI implementation class really initialize?

It's not a macro, as Uwe showed you. Inside your Constructor method just enter the following code:
break sy-uname
Because of the '.' in your name you cannot use
break yuan.gan.
I am suprised to see that as a user name like that though.

Implement an OSS note

hi everybody
i have to implement an OSS note 99507
where its said to create a program zlisdel
ive created it,should it be executed when the note is still in process or i shd wait, during the implementation of the note, the program is executed automatically?

If the note says to execute the program, then do so anytime after the program has been activated. I assume that you needed to create the program and the note put the code in it for you? If so, go to SE38 and make sure there is code in the program and activate, then you can run it directly from there. The note will not execte the program for you.
Regards,
Rich Heilman

While creating the Transfer Order system is not picking Sale order stock?

Hi All,
In the B2B process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
Regards.

C S Javali
Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
Regards
Pradeep

After an "event" on my computer, all of my playlists were deleted. All of my music is still there, but I am concerned about synching my idpod, as many hundreds of hours were involved in creating the playlists and I do not want to lose them. Suggestions?

After an "event" on my computer, all of my playlists were deleted. All of my music is still on iTunes on my computer, but I am concerned about synching my idpod, as many hundreds of hours were involved in creating the playlists and I do not want to lose them. Suggestions?

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

The 2,000,000th OSS Note

as can be seen from the Wiki I maintain, I'm a bit of an OSS Notes geek.
As we move towards the 2,000,000th OSS Note, I wonder who from SAP
will get that Note ?
Andy.

wow! Makes you wonder really how huge SAP is.
When I started my SAP career a professor once told me that it was impossible to completely understand every part of SAP as a human being. My initial reaction was:"Oh yeah, well I'm gonna show you!"
But when I first logged on to R/3 and found out that there were more than 73.000 transactions I stood corrected
This was more than 10 years ago
It is probably close to impossible to even read 2.000.000 notes in 1 human lifetime.
Cheers, Rob.

Problem in Activate the BADI implementation

HI All,
I doing the implementation for the MB_DOCUMENT_BADi, when I am activating the implementation, it is giving one message
'Select or Create Enhancement implemenation' , in that it is showing enhancement points options.
How to activte the BADI implemetation in ECC>
reg,
Ajay reddy

Hi,
In se19 select classical badi ...give the z* name ...under create implementation select classical badi and give the badi name as
MB_DOCUMENT_BADI ......click create button...
Next after giving short desc...a pop-up window will be displayed for the creation of enh.implementation ...select the create button ...give the enhancement impl. name and short desc..now in the pop-up you can see the enhancement implementation jus created select that same ...and press enter......now you can activate the implementation......as normal..
Thanks,
Shailaja Ainala.

Implementation of OSS Note-304290

Hi,
This is Kiran Kumar. We have an issue with the US tax classification.
Issue is Tax classification is not passing to the subsequent documents like Invoice to Debit Memo Request /Credit Memo Request. Hence Tax values are becoming zero. ususally XR1, X2, XR3,... are coming from the Vertex system (US tax system). Hence SAP suggested to implement the OSS Note-304290
if you refer the OSS Note-304290 they are suggesting to new condition base formula and attaching the source code (Given in correction instructions-167690 ) in the base formula and finally assigning this Condition base formula to the tax conditions in the pricing procedure.
if we refer the current pricing procedure , Tax conditions XR1,....XR6 are with the AltCty is 301 to 306 and AltCBV is 16.and the requirement is ZERO.
Please suggest me where the new condition formula has to be applied- is it to be implemented in AltCty or AltCBV
guide me to proceed furthur
Regards,
Kiran Kumar

Hi ,
Please go through the folowing points to implement the new source code.
1. Use transaction VOFM to create a new condition base formula for Application 'V' (Sales/Distribution) in the customer name range.
2. Implement the attached source code into the newly created formula. Save and activate this.
3. Now assign the new base formula to the affected tax conditions in the used costing procedures (transaction V/08) for field Alternative condition base value.
Hope it helps.
Regards,
Pasapula.

Problem in invoking the BADI in SE19

Hi,
I am working on a BADI for the Tcode VD02 and i am facing a problem that when i am trying to activate the Implementation it is asking for the creation or assign of the Enhancement Implementation,but i am working on the existing BADI .
Please provide me guidelines whether should i create the Enhancement or assign it to the Existing ones which are displaying in the pop-up screen......

Hi ,
goto SE18 and give you badi name then click on change , clcick on enter , when you are in change definition screen , from Menu click on implementation and then create , give a name and when you are in Implementation name then click on interface tab , double click on the method ,it will take you to the editor screen , you wiite your code,activate it and activate the BADI.
Please let me know if you still need any more help.
Thanks and regards,
Rajeshwar

Use solution manager to create customer message and apply oss notes

Hello All,
Is it possible to use SAP Solution Manager to create/ open Customer Messages and for the application of OSS notes in satellite systems via solution manager?
Currently, our Solution Manager system is bieng used for Central System Monitoring!
Please let me your your expert thoughts!
Thanks,
Antarpreet

Hi,
By using Service Desk scenario of Solution Manager you can convert an issue to an OSS message and follow it up.
Refer the [Link|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Snote application is also integrated with this Service Desk, you can apply SAP notes to any satellite systems.

While creating the user getting iPlanetAMUserService does not exist error.

Hi,
I was trying to create a user in access manger 7.1 console . I am getting error like iPlanetAMUserService does not exist.
path: Access control>Realm>Subjects.
can anyone please help me to give the suggestions.
Thanks
GV

And why do you think those jars are required? Guess work? Glassfish already provides them, remove them from the application deployment and try again.

Unable to delete the bad request,and also not activated.

Hi,
I am having ods1 existing in process chain,it is exporting 4ods.At the 3 ods the request was failed at datatarget level,but in RSMO status shows as green only.
For all the ODSes the data has runned for two days,on first day the request was failed,if i am going to activate or delete its not accepting.plz help me in this issue.update type for that ODS is deltaupdate..
Thanks & Regards,
Aswini.

Hi Ashwini,
In your case, the data was loaded successfully, but the activation got failed.
to confirm that, check the number of records loaded as below.
No. of records loaded.
No. of records available in "New Data Table"
If the data load is successful and there are '0' records in new data table, you can turn the QM status to green and then activate the data.
If still there are records in New Data Table, The failure might be because of the table space problem. Check the short dumps in ST22. You may find a runtime error called "DBIF_RSQL_SQL_ERROR". You'll see a message "Unable to extend table". You can notify this runtime error to Basis team and they can help you out.
If it's not the table space problem, you can delete the request by turning the QM status to red in RSMO/Data target (though it is already red, turn it to red again) .
let me know the source system where you are getting the data from. I can suggest you whether to delete the data.
Regards,
Shashi

Unable to create the implementation for BBP_PD_DOWNLOAD badi

Hi ,
Iam trying to create a new implementation for this BADI BBP_PD_DOWNLOAD as zbbp_pd_download but when iam trying to activate it .iam getting a message that already active implementation is there and i cannot create a new implementation unless i deactivate the other one.since it is a standard one i cannot deactivate it .
Has any one used this earlier . any inputs on this wil be of great help .
Thanks in advance

Hi
You can create any number of Customer Implementations, provided only one is active at a time.
Here are the steps ->
Either Using SE18 / SE19 Transaction, or
After you call the IMG activity, the system displays a dialog box where you enter a name for the implementation.
If implementations of this Business Add-In have already been created, the system displays them in a dialog box. You then choose one of them by choosing Create, and continue as follows:
1. In the dialog box, enter a name for the implementation of the Add-In and choose Create. (Say ZBADI)
The system displays the initial screen for creating Business Add-In implementations.
2. On this screen, enter a short description for you implementation in the Implementation Short Text field.
3. If you choose the Interface tab, you will notice that the system has filled in the Name of the Implementing Class field automatically, by assigning a class name based on the name of your implementation.
4. Save your entries and assign the Add-In to a package.
5. To edit a method, double-click its name.
6. Enter your implementation code between the method <Interface Name>~<Name of Method>. and endmethod. statements.
7. Save and activate your code. Navigate back to the Change Implementation screen.
Note: You can also create an implementation for an Add-In and not activate it until later. If you want to do this, do not carry out the following step:
8. Choose Activate.
When the application program is executed, the system carries out the code in the method you wrote.
Regards
- Atul

Creating the BAdI implementation: se19(OSS note )

Similar Messages

Maybe you are looking for