Is there a limit on the size of the input for the Solve Linear Equations block?

Hello,
I'm trying to figure out why the Solve Linear Equations block will properly function with some sets of data and why it won't with others. What my program is doing is taking a signal and comparing it with a batch of sine and cosine waves to try and pick out patterns in the data. I have different sample sizes and it seems to work when I throw 3900 points at it. However, I have another set with 4550 points and it gives me incorrect amplitudes for my sinusoids. Is there some limit to the size of the matrices that I can give this block? Or is there some other workaround that still allows me to keep all of my data?
Thanks,
David Joseph

Well, the best way to show what I expect is to see the entire program. It's pretty evident that when looking at the graphs, something isn't right. What is supposed to happen is that the runout amplitudes are found, and then those sinusoids are subtracted from the initial data, leaving tooth to tooth data and noise. When I use the larger arrays, it seems as though not all of the data gets through (count the peaks on the product gear runout graph vs. initial) and the amplitudes are much to small, such that nothing is really taken out and the tooth to tooth data looks like the initial data.
Also, we will also be using an FFT, but it will be limited to only determining the frequencies we should check. I've fought with the fft blocks quite a bit and I just prefer to not use them. Plus, the guy I'm writing this for wants exact answers and does not want to pad or resample the data or use windows.
The exact number of data points isn't important (ie. 4550 vs 4551) since I use the array size block to index the for loop.
As for typical values, they can change a lot based on materials. But, the original 3900 data point sets and the 4550 data point sets used practically identical gears. So, use the original 3900 sets I've included as references (check the RO array block numbers to compare).
I've included 3 3900 samples, 3 4550 samples, and 3 4550 samples that have been truncated to 3900 or so as constants on the block diagram.
Also, the check for additional runouts (like 3 per rev, 4 per rev, etc..) is optional, but if you choose to use it, use positive integers only.
I don't know how much of this program will make sense and I have wires running everywhere.. so good luck. Keep in mind I'm only a student and I hadn't touched Labview until about 2 or 3 months ago.
Thanks,
David Joseph
Attachments:
Full example.vi ‏139 KB

Similar Messages

DeserializeJSON - is there a limit on the size of the JSON data that can be converted?

I have some valid JSON data that's being converted successfully by DeserializeJSON... until it gets to a certain size, or that's certainly what appears to be happening. The breaking point seems to be somewhere in the neighborhood of 35,000 characters... about 35KB. When the conversion fails, it fails with a "JSON parsing failure: Unexpected end of JSON string" message. And when the conversion fails, the JSON data is deemed to be valid per tools like this one: http://www.freeformatter.com/json-validator.html.
So, is there a limit on the size of the JSON data that can be converted by DeserializeJSON?
Thanks!

Thanks Carl.
The JSON is being submitted in its entirety, confirmed by Fiddler. And it's actually being successfully saved to a SQL Server nvarchar(MAX) field too. I can validate that saved JSON.
I'm actually grabbing the JSON to convert directly from the SQL Server, and your comments / thoughts led me down the path of resolution.
Turns out that the JSON was being truncated prior to getting to the DeserializeJSON command, but it was the cfquery pull that was doing the truncating. The fix was to enable "long text retrieval (CLOB)" for this datasource in CF Admin. I'd never run into that before or even knew that this setting existed.
Thanks again for your comments!

Is there a limit on the size of Exchange mailbox?

One of my user has 8Gb of data stored on the Exchange server mailbox. (Yes, on the server, not local pst)
Since ipad can store up to 1,000 recent messages, is there is limit on the size of 1,000 emails to be stored locally on the iPad, assuming the user has a 64Gb New iPad?

no

Is there a limit on the size of SDHC card that can be read with the iPad camera connectioin kit?

Is there a limit on the size of SDHC card that can be read with the iPad camera connection kit?

I've successfully connected 32 gig SDHC and CF cards so if there is an upper limit, it's at least 32 gig.
I know SDXC will not work.
With the cards that don't work, have they been formatted correctly? the camera connection kit will only read cards holding images. (Well, it'll only see the images) And those images have to have a file name of exactly 8 characters (DSC_2342 for example) and they have to be in a folder named DCIM.
Anything else it wont' read.
I put a photo on there called 'Christmas' and the connection kit won't see it. I put a photo on there in the DCIM folder named XMAS2342 it'll see that.
So it's possible that those cards weren't read because they weren't speaking the right language.

HT2729 I'm not able copy an audio file (mp3) of size 18,890KB to my Iphone that has the latest OS - iOS5.1.1. Is there a limit on the audio file size ?

I'm not able copy an audio file (mp3) of size 18,890KB to my Iphone that has the latest OS - iOS5.1.1. Is there a limit on the audio file size ? I was able to play the same song on iTunes but not able load it into my iphone. .. Any suggestions ?

I'm not able copy an audio file (mp3) of size 18,890KB to my Iphone that has the latest OS - iOS5.1.1. Is there a limit on the audio file size ? I was able to play the same song on iTunes but not able load it into my iphone. .. Any suggestions ?

Is there a limit to the size of string we can paste in a text area ?

Hi,
I have a dialog box and in it a Text Area. When I copy from another page a large amount of data and try to paste it in the text area - it doesn't work.
I can't paste in it more data but I can type in it manually.
Is there a limit to the size of string we can paste in a text area ??
Thanks in advance:)
maya

There is no Limit to the string size. Since Swing follows MVC architecture, the data to be pasted is stored in model and the view shows the text to the user. If the text size is large, the screen appears to freeze for the some time while the data is stored in model and painted on the screen.

Is there a limit to the number of photos I can include in a PSE 12 slide show?

I recently took a trip to Ireland and...being the camera addict that I am ...took right at 3000 pictures.
Obviously -- I don't want to include all of them, but I do have several hundred that I would like to put into a slide show.   Is there a limit to the number of photos I can use?
Also, I notice that there's an option for adding a narration.    I'm new to "12",   so .... how do I go about this?
Hope you can point me in the right direction.
Thanks so much,
MarDee

I just discovered that I have the trial version of Adobe Premier.   I've
been playing around with it a little bit and NOW I wonder if it might not
be the perfect program for me to use to create my Ireland travelogue.   I'm
about to the point of thinking that the investment in the program &
upgrading to the "real" thing will be worth the money.
NOW...should I do this, is it going to be better to leave the photos in
their current size (just a step below RAW)   or resize them down to the
size used in email?    That being said --- what is going to be best for
putting on a DVD to share with friends & family.   Looks like AT LEAST 1000
photos.
On Tue, Jun 10, 2014 at 10:04 AM, MarDee McDougal <[email protected]>

I have 15000 photos in my 1Phooto library in 58 events. I have also made 27 slide shows from some of these events. When opening iPhoto, the photoscome up slmost instantly but the side bar seems to take forever to come up. Is there s limit to the amount o

I have 15000 photos in my 1Phooto library in 58 events. I have also made 27 slide shows from some of these events. When opening iPhoto, the photoscome up slmost instantly but the side bar seems to take forever to come up. Is there s limit to the amount of photos yu can have or to the amount if items in the side bar?

Try this basic troubleshooting technique: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - reboot
4 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Is there a limit to the number of email addresses in one message?

Hello
Is there a limit to the number of email addresses in one message with Mac Mail?
I am trying to send out to c900 email addys and am being told my server does not recognise the email addresses. I will check with the folks hosting the email also.
Many thanks
Matthew Causon

Ooh, yes, 900 emails at once will absolutely not work (unless you get very very lucky).
If this is just a one-off, you should group the addresses into, at the very most, 50 addresses, and send batches. If you're doing this a lot, I would recommend using something like DirectMail.
Matt

Is there a limit to the number of addresses can I put into a group of multiple users in my address book?

I have just started using Thunderbird and want to set up a number of list groups in my Address Book so that I can simply click on the list name and the email goes to multiple people.
Is there a limit to the number of addresses that I can put into each group? Or, can I put as many addresses into each group as I want to? Thanks for your answer.

Thunderbird has no limit.
See http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List

In my Mail program (4.6), OS10.6.8, can I send bulk email bcc? If so is there a limit to the number of names/addresses that I can send?

In my Mail program (4.6), OS10.6.8, can I send bulk email bcc? If so is there a limit to the number of names/addresses that I can send?

To add the BCC field to the message window, create a new message, click the 'three lines' button near the to and from fields & select the 'BCC Address field' or choose the 'customise' option. This button may be a 'gear' on the older OS (I don't recall for 10.6.8 Mail).
The BCC field is more likely to be limited by the email server than Mail app. If you add hundreds of addresses (or use large groups with many addresses) the email server may assume you are sending spam. Sometimes it causes the server to drop the message or bounce them, different providers also have different rules, so you need to use bcc & ccc with care.
If you plan on doing mass mailing you would be better with a service that handles it correctly for you (i.e. sends multiple messages without using ccc or bcc).

Is there a limit to the number of Apple TV's attached to an iTunes Library

I recently replaced 7 (seven) Version 1 Apple TV's with Version 3 Apple TV's and noticed that I now receive an error, "Cannot connect to the iTunes Library, ensure that you are on the same network, etc." on two of the Apple TV's. Shutting down iTunes and relaunching results in two others not being able to connect, but two of the previous non-connects now do. I've tried this several times and each time it appears as if only 5 of the ATV's can connect at once. Is this a limit imposed upon by Apple? Is there any workaround besides having two of the "non-connects" access the iTunes store for purchased content? The library is extensive and contains a lot of purchased content, but also contains legacy content from old CD's, DVD's and the like. I'd like to be able to access all of it if possible.
Note that the way this used to work with the older ATV's was that 2 would directly sync and 5 would stream. But with each new iteration of iTunes these ATV's seemed to get flakier and flakier hence the replacement. The new ATV's are all connected via Home Sharing.
I'm running iTunes 11.0.2 on a Mac Mini OS X Server (10.6.8). Would it help to upgrade to the latest OS? I can understand bandwidth issues, but we're running a Gigabit ethernet (wired) network to these ATV's and the old ones worked fine previously. Why impose this limit? Come on Apple. Give us a little love for those of us that push your tech to the limit.

deviates322 wrote:
is there a limit to the amount of music you can put into your itunes library? i just passed 10 GB (just over 1600 songs) and i'm getting a warning telling me i have to much music and the library will not be saved.
Perhaps you would post the exact message (because that is not what is states)?

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my wireless network. Is there a limit on the number of devices I can connect to my AirPort? I never have a problem connecting an Apple device (AirBook, iPad, etc).

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.

The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.

Is there a limit on the number of Key Lookups against a table in a mapping

I'm using OWB 11.1 and have a mapping with 15 Key Lookups against the one table. When I Validate the mapping it objects to a Key Lookup not being connected, even thuogh in the mapping all the Key Lookups have been renamed to their relevant fields?
Is there a limit to the number of key lookups against the one table?

Thanks for the replys.
I'm getting a validation error, so can't run the mapping. Error VLD-1108: Operator Key_LOOKUP is not properly connected.
The issue is solved, after checking each of the Key_Lookups, one was not connected to an output. The error occurs if an output field isn't used (connected to) a table or other operator.
Edited by: user616385 on Sep 30, 2009 7:58 PM
Edited by: user616385 on Sep 30, 2009 8:01 PM

Is there a limit in the number of user accounts on Mavericks?

Hi
I would like to create a system with a lot of user accounts (+/- 200).
I have two questions:
- Is there a limit in the user accounts on Mavericks? Where can I find more infomation about this?
- Is there a possibility to automatically create a high number of accounts? Or at least some sort of template?
Huge thanks for any help.

I don't think that there is a limit.
Are you using OS X Maverics Server?
https://help.apple.com/advancedserveradmin/mac/3.0/#apdDC3BA60F-246B-43E8-AB24-F 6419B32FF6D
In many organizations, a single shared directory domain is adequate. It can handle hundreds of thousands of users and thousands of computers sharing the same resources, such as printer queues, share points for home directories, share points for applications, and share points for documents.

Is there a limit on the size of the input for the Solve Linear Equations block?

Similar Messages

Maybe you are looking for