Is there a practical and effective iFrame extension for DW CS5 ?

I have been looking for a oractical and effective iFrame extension for CS5.
There used to be an excellent one years ago for DW4 and some other versions, that manipulated the iLayer properties inspector so that you had complete and thorough control over all aspects of you iFrame from just one tool bar/property inspector. This was a free given away extension, but absolutely superb in its function and precticality.
Does anyone know of anything similar for todays versions of DW ?

I code my own which is very simple with the <iframe> tag.
http://www.w3schools.com/html/html_iframe.asp
Four Level offers this extension for DW CS5
http://www.fourlevel.com/product/iframe/
Nancy O.

Similar Messages

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Flash Catalyst CS5 FXG Extension for Photoshop CS5

Hello,
I'm having an error message (you do not have the appropriate permissions required to perform the operation..) when i install the FXG extensions for Photoshop CS5. I'd like to use the Round-Trip-Editing function and it asks me to install the FXG extensions.
Is there something i missed? I'm currently using windows7 (64)
Thank you
Thomas

Hey Thomas, I don't know if you have figured it out yet, but I was having the same issue. To install it turn UAC off, restart computer and then install the plugin with no issues. Regards

Where's the Adobe AIR Extension for Dreamweaver CS5

I see only the Adobe AIR extension for Dreamweaver CS3 and CS4. Where's the AIR extension for Dreamweaver CS5?
~Oscar

We expect to have an updated extension out in the next few weeks. Please stay tuned for an announcement on our blog here: http://blogs.adobe.com/air/
Rob Christensen
Product Manager, Adobe AIR

When Will the Adobe AIR 2.5 Extension for Dreamweaver CS5 Be Available?

To Adobe AIR Development Team,
When will the Adobe AIR 2.5 Extension for Dreamweaver CS5 be available? If it's already available, where can I find it? If not, when will it be available?
Thanks!

Thanks i will iinstall again
WOW Extension for Dreamweaver CS5!
Air 2.5 Extensions for Flash Builder 4.4 / 4.5x ???
Thanks merry xmas, SnakeMedia

Downloading and Installing Dreamweaver Extensions for ProStores

I've come across a few mentions about there being a ProStores extension for Dreamweaver, but have no actually been able to find the plugin to use it. Is this a real thing, or not? Thanks!

AFAIK, ProStores is an eBay owned e-commerce solution with its own PageBuilder software.
eCommerce Solutions for Your Web Storefront | ProStores
Nancy O.

HTML5 Extensions for Photoshop CS5 and above ?

Hi guys,
I am trying to get into developing HTML5 extensions for Photoshop, and I'm a little confused about the compatibility of this kind of extension across the different versions.
I have downloaded this starting point code (hallodom/photoshop-extension-example · GitHub) and it runs without problems on Photoshop CC. I just added the manifest.xml file in a CSXS folder, based on what I got from a dummy projet I created with Extension Builder 3.
Now I have tried to make this work in CC 2014, without success. All I did is move the extension from the CEPServiceManager4 folder to simply CEP, and update this part of the manifest.xml :
<HostList>
<Host Name="PHSP" Version="[15.0,15.9]" />
<Host Name="PHXS" Version="[15.0,15.9]" />
</HostList>
The extension appears in the Extensions menu, but when I launch it, the panel appears but is empty, and I get the following error message :
Cannot complete command because the extension could not be loaded.
Also I wanted to know if this kind of extension can be used on CS5, CS6 ? I really would like to make an extension that works at least from CS5 and above.
Thanks for your help!

Hi,
You should probably set the Debug Flag for CC 2014 too, see instruction here:
undavide/PS-Panels-Boilerplate · GitHub
(PS: HTML extensions are for CC onwards, not CS6 and previous versions)
Regards
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

How to Package Photoshop Extension for cs4/cs5 with manifest.xml

Hello,
tl;dr: How can I package my extension for both cs4 and cs5 in a way that respects the extension's window geometry?
I have a panel that specifies window geometry in it's manifest.xml. When the panel is installed into Photoshop's panels/ folder, the geometry gets ignored, so I'm trying to package the panel as an extension to be installed via the Extension Manager. I have run into different problems for each CS version. I've read quite a few pdfs about the Extension Manager, UCF command line packaging, etc, and have not been able to find a solution that works for both platforms.
My understaning
My trial and error research has lead me to understand that the extension's files must eventually end up in the (mac) /Library/Application Support/Adobe/<CSversion>ServiceManager/extensions/ directory. In CS5, if the extension's folder contains a manifest.xml file (ex: /extensions/GuideGuide/CSXS/manifest.xml) that specifies window geometry, Photoshop will respect that window geometry when the panel opens. However, in CS4, this is not enough. From my tests, Photoshop CS4 doesn't seem to do anything with the manifest.xml file. Instead, I had to modify /Library/Application Support/Adobe/CS4ServiceManager/ServiceManifest.xml and add my extension to it's contents. Once I did this, Photoshop CS4 launches my panel and respects it's window geometry.
The problem with this is that it's a manual installation. I can't ask my users to dig around in their system files to install my panel. In addition, since it's unsigned using this method, it won't work if they're not flagged for debugging. I've started exploring using the Extension Manager, but I have run into problems that I cannot find ansers in the few pdfs about packaging that I've been able to find.
CS5 Problems
If I use the UCF command line tool, I can package and sign my file. It installs fine and does what I want. However, using this method, I haven't been able to find a way to specify the author and description that shows up in the Extension Manager.
CS4 Problems
The UCF command line tool doesn't appear to make packages that can be installed by CS4, and I haven't been able to find one that is compatable. I've had to result to using the Extension Manager to package my extension based on a .mxi file. The problem I have here is that installing files this way limits me to putting them in the /panels directory, which then causes the panel to ignore the indow geometry. Is there a way with an .mxi file to install in the /Library/Application Support/Adobe/<CSversion>ServiceManager/extensions/ directory and modify the /Library/Application Support/Adobe/CS4ServiceManager/ServiceManifest.xml file?
There must be, because Kuler and other extensions are installed there.
Thank you SO much for any help you might provide. I've spent weeks trying to get this to work and have run into nothing but dead ends and wild goose chases.

Your extension is a CSXS extension. For CSXS extension it's introduced in Extension Manager 2.1. (You can download Extension manager 2.1 from http://www.adobe.com/exchange/em_download/em20_download.html)
In Extension Manager CS2.1 only MXP package is supported. In Extension Manager CS5 CSXS extension must be packaged by ZXP format. So you have to generate two packages for CS4(mxp) and CS5(zxp)
For CS5, you can use ucf.jar to generate the zxp package.
For CS4, you have to create an MXI file and package it by Extension Manager 2.1 to mxp package. Here is a sample CSXS mxi file:
<macromedia-extension
           name="CSXS_TEST_EXTENSION"
           version="1.0.0"
           type="Command"
           requires-restart="true">
          <author name="Macromedia" />
          <products>
                    <product name="Dreamweaver" version="10" primary="true" />
                    <product name="Fireworks" version="10" primary="true" />
                    <product name="Flash" version="10" primary="true" />
                    <product name="" version="11" familyname="Photoshop" primary="true" />
                    <product name="Illustrator" version="14" primary="true" />
                    <product name="CSXS" version="1" />
          </products>
          <description>
          <![CDATA[
          CSXS extension sample.
          ]]>
          </description>
          <ui-access>
          <![CDATA[
          Extension Name: kuler
          ]]>
          </ui-access>
          <license-agreement>
          <![CDATA[
          ]]>
          </license-agreement>
          <files>
                    <file source="test_extension" destination="" />
          </files>
</macromedia-extension>

Where can I get the Adobe AIR extension for Dreamweaver CS5.5 ??

I am either going insane or all the links I can find are broken.
http://www.adobe.com/products/air/tools/ajax/ redirects to http://www.adobe.com/devnet/air.html, which has no apparent download link.
Any help most welcome.

I have been looking for the past couple of weeks. Some dweeb at adobe decided to redirect all URLs that had "air" in them to the stupid dev site that of course has no information on it about dreamweaver (except to buy it). It would be logical to put something big on the right side that says "if you got here to download the adobe air extension for dreamweaver it has been moved to here..... I guess nobody is monitoring the thousands of redirects from the air/tools/ajax and might say.. hey I should fix that.....

Extension for dreamweaver cs5.5

I seek extensions for dreamweaver 5.5

Hi bozosky14,
Welcome to Adobe Forums. See https://www.adobe.com/cfusion/exchange/index.cfm?event=productHome&exc=3 for DW extensions.
Thanks,
Preran

Are there any memory and cpu logging extensions that is addon, not process oriented, that will detect ram/cpu usage, even within the main Firefox process?

And why wasn't this a feature in FF already? I hear it was, but it was dropped in FF4 as part of some kind of feature freeze? Why was this most important of all features removed, and how can I patch this? So I can use my browser properly again. Maybe an addon that would make about-addonsmemory detect that kind of stuff would do, maybe something that forces all addons to operate within the plugin container. Or maybe just something that will moniter everything right.

The CPU usage part is the most important

Is there a Play Store .apk downloading extension for Firefox desktop like there is for Chrome (Which I don't use)

Just looking for an extension or plugin to download .apks from the Play Store to my desktop. I'm talking legally purchased or officially free ones. Chrome has it, but I don't use chrome. I also don't have anything Google on my phone other than, arguably, the OS, which is CyanogenMod. There are apps I'd purchased when I was still running the default OS and I'd like to have them back.

What is that? How should it be used?

Flash learning interaction and Course Builder extensions for CC products?

Hi all, Could anyone advise me where I could get extension Flash learning interaction for Flash CC and Course Builder for Dreamweaver CC? Sometimes their use and after stopping the development of eLearning Suite I anywhere on the Adobe site found these extensions.
Thanks for any response.
Yarik

You would be better advised to ask these questions on the Flash or Dreamweaver forums. This is the Adobe Captivate forum.

Is there any reliable and free add-on for itunes that automatically adds lyrics to songs in my library?

I'm trying to find an iTunes add-on that will automatically add lyrics to all the songs in my library. They are ripped in AAC format. I'm using XP with SP3, and iTunes 10.5. As I have over 6000 tracks in my library, you can understand that adding them all individually would take the kind of patience a saint would envy.
So far I've tried and add-on (the name of which escapes me) which claims to be compatible with iTunes, WMP and WinAmp but, in reality, only works with WMP - and the songs it scans aren't actually in my library. I've also tried SoundCrank but every time I try to install the **** thing it tells me I need to install a version of iTunes that is 7.0.1 or later. I did mention I'm using 10.5 right?
Are there any other alternatives that are reliable and free (or at least really cheap)?

http://www.apple.com/support/contact/
This can point you to authorized repair places. But doesn't list unauthorized ones, which may be what you're wanting.

Is there a SATA and USB 2 CARD for my G4?

I am looking to expand my old G4 to read SATA HD and USB2 DRIVE. Please recommend one. Heard some problem about deep sleep freeze. Thanks!

hi P.O.
Using a SIIG serial ata card (sc-satm12) with a Western Digital 200Gb drive, and an IOGear USB 2.0 card without any problems. I also made sure to set energy saver to "never"...
ken

Is there a practical and effective iFrame extension for DW CS5 ?

Similar Messages

Maybe you are looking for