Is there a public test server with remote objects?

Hi all,
I have to give a lecture about RMI and I have succesfully executed remote method invocations with client and server both on my local machine. Is there any machine outside with remote objects whose methods I can call? (Calling a real remote object would be more spectacular than calling a remote object residing on my local machine!)
Greetings,
Alfred

I dont believe so, but there is no reason you cannot set up a small server on another machine on your network that you could connect to in your lecture.

Similar Messages

How to configure Time Capsule etc as a local network server with remote access server and for backups

I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
We've managed to set up a wireless network and both have wireless internet access through the TC
But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?

But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
How is the security setup on the TC?
The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate but it allows me full access to all the files.
If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords.

[Locked] Switching from testing server to remote server

I set up php pages on a testing server successfully. I exported the database from the testing server to the remote server no problem. But I don't understand how to switch the pages from the testing server to my remote server and make the connection to the database there. I read the manual about switching the connections, but I'm not having any luck. Here's what's not clear:
Am I supposed to move the page to my local root folder before putting it to the remote server? When I do this, the Databases tab says there is no connection, though the page still starts with this code: <?php require_once('file:///C|/XAMPP/htdocs/TRS/Connections/trs_db.php'); ?> When I try to make a new connection, I get an error message that references that code.
Do I also move the server scripts and connections folders from the remote server to the local root folder then put them to the server?
The testing server tutorial stops short of explaining this switch, and the manual doesn't seem to address the testing server at all.
Thanks.

Sorry! My question is the following: Has anyone switched from saving calendar events to their e-mail server to icloud with success? I do not want to make the switch if I will lose events or events will not appear as they do now, or if I will lose everything in the notes that I write for events.

Test server and remote server

The sync button syncs files from the local view to the remote server. How
do you sync files from the local view to the test server?
Best,
Christopher

When you created your site in Dreamweaver, you gave it a name and defined a local site folder, right? You shouldn't have to do that twice to add a remote server.
In Site Setup > Servers, you will have to define a new server however if you want to keep your testing server. But this should not cause any conflicts, because they are both pointing to the same local folder in XAMPP, right?
If I know I'm going to need a testing server, I make sure that my site folder is in my XAMPP/htdocs/ folder. That way I don't have to bother with having to keep track of two versions of the same site. Then when it's time to upload it to the remote server, I'm just adding a new server, and checking the "Remote" box.
One site, two servers ( Local/Network & FTP), no conflicts.

How to connect a CVS server with remote Hosts(NWDS7.0)

Hi Frndz..
I installed CVSNT server in one machine n itz workiing fine with that NWDS in that machine , now i want make connect that CVS server from remote machines NWDS's to use that CVS server as a central repo'
Can anyone guide me how can i connect that server from remote machines thru NWDS.
Thnaks in Advance
Regards
Rajesh

rajesh,
did u check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d079e754-8c85-2b10-8b9a-b36db5262122
Thanks
Bala Duvvuri

SCCM 2007 Server with remote servers

I'm working on a virtual lab envirement on a server 2008 R2.
All the virtual servers run Wndows Server 2008 SP2 x86 full updated.
1. Server: DC, DHCP, DNS and all that stuff.
2. Server is a file share server for the network.
3. Server is the SQL Server whit SQL Server 2005 SP2 atm.
4. Server is the SCCM Server with WSUS SP2.
My plan is to have SCCM installed on one server and then have 2 remote servers to that one. One to the SQL (already done) and one for the updates to SCCM WSUS function..
Will that setup work?

Will it work? Sure. Is it the best practice? no.
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Error during the hotbackup restore to test server with different db name

Hi,
I am using hotbackup to restore the database with new name on other server
i moved hot backup set to test server i recreated the controlfile
SQL> @/mounts/dcsnpts1_temp/oradata/dcsnpts1/create/create.sql;
Control file created.
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 10354451046463 generated at 06/08/2010 02:51:17 needed for
thread 1
ORA-00289: suggestion :
/mounts/dcsnpts1_arch/dcsnpts1/dcsnpts1_arch_R677255203_T1_S1030.arc
ORA-00280: change 10354451046463 for thread 1 is in sequence #1030
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1:
'/mounts/dcsnpts1_data/oradata/dcsnpts1/dbfiles/system01.dbf'
ORA-01112: media recovery not started
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1:
'/mounts/dcsnpts1_data/oradata/dcsnpts1/dbfiles/system01.dbf'
i do not have archive logs how i can open the database with resetlog
apprecited inputs.
Thanks
Prakash

all 3 instances reside on single server we use netapp snapshot backup what it will do is it will take all db's snapshot in same time (hotbackup).The snapshots are NOT instantaneous!
If they were actually frozen in time, the DB would be consistent & open.
The snapshot must be handled as any other online (hot) backup.
ALTER SYSTEM SWITCH LOGFILE;
alter database begin backup
-- take hot backup
alter database end backup
ALTER SYSTEM SWITCH LOGFILE;
Restore backed up files, then apply all redos inclusive to steps above

Weblogic 10.3.0 issues with remote object calls.

All:
I was wondering if anyone has experienced any issues with Weblogic 10.3.0 dropping initial remote object calls over AMF Secure Channel. Here are the issues we are experiencing.
1. FLEX applications fail consistently on the first remote object call made across the AMF Secure Channel. Resulting in the request not returning from the application server; which has had varying affects on the different applications including missing data, application freeze and general degrading of the user experience.
2. FLEX applications require a browser/application refresh once the application has been inactive for a certain period of time. In our experiences the behavior occurs after 30 minutes of inactivity.
I've deployed this same code to Weblogic 10.3.3 and the behaviors go away. Are there any patches to 10.3.0 that might take care of this issue that we are not aware of?
Thanks for you help,
Mike

Hello,
I found the problem. But I needed change the target of all my datasources until discover that one of my datasource didn´t answer and no errors was trigged.
My server was waiting this datasource, and not get started.

Flex and CFC with Remote Object

I wrote a simple cold fusion componenet on my webserver at:
http://www.paramountmediainc.com/webservices/eadexchange/agent_sys.cfc
Now I want to play with that in Flex with a Remote Object.
I'm writing the flex on my local machine. I tried this approach but
was uncessfull:
<mx:RemoteObject id="acctRO" showBusyCursor="true"
source="webservices.eadexchange.agent_sys"
endpoint="
http://www.paramountmediainc.com/flashservices/gateway">
I get the following error ...
TypeError: Error #1034: Type Coercion failed: cannot convert
Object@3b15da1 to mx.messaging.messages.ErrorMessage.
Any ideas what I'm doing wrong here?

You cant really replace Struts with Flex, maybe a view part
, thats about is, you still need backend processioning
logic,all that you are asking is difficult to answer is one reply,
IMHO, best thing you can do is to dive into following URLs :
http://www.adobe.com/devnet/flex/
http://livedocs.adobe.com/flex/3/html/help.html?content=Part2_DevApps_1.html
http://livedocs.adobe.com/blazeds/1/blazeds_devguide/
http://livedocs.adobe.com/flex/3/html/help.html?content=Part6_ProgAS_1.html
and of course your best friend :
http://livedocs.adobe.com/flex/3/langref/index.html

Checklist for making transition from local testing server to remote

Does anyone know of any resources which take one through the necessary steps required in putting an ADDT-built site to a remote server? I test on XAMPP (basic) and am dreading the errors I will discover when I actually put one of these sites to server...

It all depends on waht you are going to do with the data on the remote.
if tehre are no updates there, creating a simple materialized view on the remote to pull it's data from the local should suffice.
If there are updates on the remote, you will more than likely want to look into either Multi-master replication, or updatable materialized views.

Using local/testing server with cs5 inserting images look fine in the split screen but do not show

Hi
If I open example: header.php and insert any photo jpeg/.html ecs i can see the images in the split screen but not in the browser if i save then refresh. I am able to make any change to the code ecs. and they are reflected just fine. I have tried this with my fireworks images .html and when that did not work i tried a strait jpeg off the desktop. This all did not work. I have deleted the local server then step by step created a new one via devnet instruction. This did not work! everything looks fine i even tried in 3 sep browsers with 0 luck....There is no remote server connected at this time because i am making a child theme for my current site. After all changes are done we will the ftp the word press files to site and change.
Ps i even started over from scratch with 0 positive affects....

After a lot of pain!!!!!!! the issue is fixed lol After 3 weeks I have overlooked the obvious !!! so the simple fix was the path of the image. Yes i feel stupid 10 years in lol....
Apparently dreamweaver cs 5 will not use the full path when inserting images into the page example: If you drag the image out of your assets folder or however you do it, DW will give you a path like this <img src="images/glass.jpg" width="800" height="729"> This is not the full path and when your pist!!! you cant see things like that ;( so the image path should look like this:
<img src="wp-content/themes/adszoom/images/glass.jpg" width="800" height="729">
also in the html files example of bad then good!

<img name="navigation" src="navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>

</body>
NOW THE GOOD!

<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>

</body>
THIS LINE IS YOUR ISSUE
<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
Ok thanks and if there are any issues with dw please ask: [email protected]

How to set up a local testing server with local-only access

Hi folks,
I've reached the point where I need to do some simple server-side scripting in my Dreamweaver work. I work remotely pretty often, so I want to be able to preview my work without having to go back and forth to the production server. It seems to me the solution would be to install a little web server on my laptop, BUT I'm concerned about security. Is there any way I can set up a local webhost but not make it accessible to the outside world?
I'm really pretty clueless about this stuff, so I'd appreciate any advice. Thanks!
-Kim

I would recommend using XAMPP Lite. It's very lightweight and portable when installed on a USB drive or flash stick.
http://www.howtogeek.com/howto/14998/
Nancy O.

Setting up testing server with MySQL

I am just migrating to the MacBook from an older iMac G5. I was running PHP with MySQL 4.1.15. I just downloaded the PHP 5.2.2 and need to know which version of MySQL will run with it on my MacBook. Any help, please, especially if you are using Dreamweaver and have migrated to CS3. Thanks, Jay

Hi
I am successfully running MySQL 5.0.37 with PHP 5.2.1. (I don't use Dreamweaver or CS3 though.)
Matt

I just updated firefox to the lastest version. I have a network in which we access the server with remote desktop. Now I can only open firefox on one of the remote terminals or the server. I need to be able to use firefox on all of the terminals.

I get an error message that says an instance of mozilla firefox is already running, please close it to continue.
The question already explains the situation. I need all three terminals to use firefox concurrently.
Did not have this problem with the previous version.

That happens if all instances use the same profile folder.
Only one instance can use a specific profile.
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Just deployed to external weblogic test server with oid

I am getting errors for the beans that have to do with progress bars. It says these objects are not serializable.
When I try to implement serializable I still get that error. What do I need to do?
I have 3 progress bars in view scope.
SEVERE: ADFc: Scope object serialization failed (object not serializable), scope='viewScope[page.jsf]', objectKey='progressBarSampleBean',
Edited by: veena pandit on May 2, 2012 3:39 PM

SEVERE: ADFc: Scope object serialization failed (object not serializable), scope='viewScope[page.jsf]', objectKey='progressBarSampleBean',

Is there a public test server with remote objects?

Similar Messages

Maybe you are looking for