Is there a resolution limit in CS6?

Is it possible to create a file with a higher resolution than 10000 Dpi? it was in CS5 and I am missing the feature!

The PS CS6 cap is 9999.999 on PPI. But that is kind of a meaningless number by itself. Photoshop can support documents up to 300,000 pixels wide by 300,000 pixels high.
What are you trying to do that requires a 10000 PPI file?

Similar Messages

Is there a size limit of the mp4 transfer to Ipod?

Hi, i have converted a video and the size is 640x480. It worked just fine for itune and quicktime player, but when i start to transfer it to my ipod video. It declines my mp4 video and said it's different format. Again i did the same thing and converted the same video to size 320x240. This time the ipod accepted it. So i wanted to know is there a size limit to the ipod??

The maximum resolution for an MPEG-4 file is 480x480.
The maximum resolution for an H.264 file is 320x240.
From the iPod Tech Specs:
H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats

2 Computer limit for CS6

I am enrolled at Academy of Art university and received a student version of CS6 for my classes. I know there is a limit saying you can install the program on up to 2 computers. I first installed the program on my compaq laptop. Then I realized I needed a better processor to run certain programs so I wiped the hard drive and sold the computer to buy a new laptop. I installed CS6 on the second laptop. Worked great. I recently bought a desktop computer and installed CS6 on there as well. Now I get the message about the 2 computer limit. I understand that the program has been installed on 3 different computers. How can I eliminate the 1st computer I installed the program on then sold? I have no way to get the computer seeing as its no longer in my possession. I have to have these programs for school.

Fintan for information on how to download Adobe software please see http://forums.adobe.com/message/5418120#5418120. Also if you have purchased the software from Adobe and choose the download option then it will be available under your account.

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks

I have an iPod touch from about three years ago. I would like to know if there is a limit on the upgrade versions because it won't let me upgrade to version 4.3 I have version 4.2.1 and it won't let me upgrade further

I have an iPod that is about three years old. I am trying to download an appf rom the app store and it says trhat I need a version 4.3 or higher. My iPOd has version 4.2.1 right now and iTunes tells me that my iPod is up to date. It won't let me upgrade any higher. Is there a limit or can I get a newer version another way?

Yes, there's a limit, and that iPod touch has reached it.
(72099)

I have a Lion content code for the free update. Is there a time limit on how long I have to download it

I received a web order number and content code for my free update of Lion. Is there a time limit on how long I have before I must actually download the application? Thanks. JVC

There is a time limit.
http://www.apple.com/macosx/uptodate/

With Oracle Portal 11g Item Text field there is no limit 32k?

I have a question to O, then Oracle Portal 11g Item Text field there is no limit 32k? Because the version old is limited to 32k for fieldText Item Text. When i add Item text than 32k have error :
http://btcportal.btc/portal/pls/portal/PORTAL.wwv_add_wizard.edititem
400 Bad Request
Unable to process request. Please check the log file for more details.
thanks!

Text items are still limited to 32k in Portal 11g. Check the Portal Online Help section 'Add/Edit Text-Based Item' for documentation of this limitation.
Thanks,
Erik Janssen

Is there a size limit on internal HD? iBook G4 1Ghz

Recently bought a used 12" iBook G4. Of course no installation discs came with it.
When received it had a 30 Gb hard drive, 528 mb RAM, and 10.3.9.
I wanted to max out RAM, increase HD size, and move to 10.4.x.
(Additional background - I have various other Macs and can use Fire Wire Target Mode from any of them to the "new" iBook.)
RAM upgrade successful. I borrowed install discs from a friend with a similar though not identical machine; his is a 1.33 Ghz. When I removed the old HD and replaced with a new 160 Gb drive, the Install discs did not see the HD. So I took the iBook apart again, put the new drive in an OWC external enclosure connected to my Powerbook G4. Saw that the drive needed formatting, duh, I did so. Put it back in the iBook. Started up from the install disc, it still did not see the HD. Started the iBook in Fire Wire Target mode; could not see the newly installed HD from the other machine either; all I could see on the iBook end of the Firewire was the CD/DVD. I have looked through various threads here related both to iBook HD replacement and to system upgrade concerns - nothing I find matches my issue.
I have since reinstalled the original 30 Gb HD, have used the borrowed installation discs to do a clean install of 10.3.x (so the similar but not identical was close enough) and a retail 10.4 Install to upgrade the system. So, 2 out of 3; I have my expanded memory, a clean upgraded system. But I hate to give up on a bigger internal HD!!!
1. Is there a size limit on the internal HD on the iBook? Is 160 Gb too large, and should I try again with a less aggressive increase? I do have a 60 Gb I could pull out of a PB G4 I will probably sell...
2. If size is not the problem, it seems that maybe it would help if I somehow pre-install the system onto the 160Gb before I physically put it into the iBook. But I do not understand the whole process of making bootable backups etc. Is there a way I can copy my current installation, or do a reinstallation of 10.3.x or 10.4.x on the 160 Gb while is is external, connected via Firewire, and then swap the 160 Gb into the iBook and have it just boot up? I see hard drives for sale in eBay "with OS X 10.x.x already installed..."? I tried, both from my Powerbook and from the iBook to do an Install onto the 160 Gb while it was attached via Firewire. The PB didn't want to have anything to do with those iBook Install discs. The iBook wouldn't allow me the option of doing an Installation onto the External drive. And I assume that a simple Select-All-and-Copy isn't going to do it for me. So how do I install onto the drive while it is external, and will it work once I move it into the iBook?
3. Probably not important, but out of curiosity... if I could use my Powerbook G4 Installation discs to burn a new system onto my 160 Gb drive (when it was connected as an external to the PB), and then put that drive into the iBook, would that work? Or would iBook vs. Powerbook differences throw off the installation?
Thanks!
Stan

Shiftless:
Is there a size limit on the internal HD on the iBook?
The only limitation of HDD size is due to availability. The largest capacity ATA/IDE HDD available is 250 GB. Theoretically there is no limit to the capacity your computer will support, if larger capacity HDDs were available.
If size is not the problem, it seems that maybe it would help if I somehow pre-install the system onto the 160Gb before I physically put it into the iBook.
This is not necessary, although you could do it this way. I note in your later responses that you have already attempted this process and have some difficulties. Here is the procedure I would recommend, after the HDD is installed.
• Clone the old internal HDD to an external firewire HDD. I gather you have done this.
• Format and erase the newly installed HDD (directions follow).
• Install new OS from disk or clone back from external HDD. (Post back for directions if you choose to install from this and then restore from backup).
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Is there a size limit to how many emails in Mail?

Is there a size limit to how many emails in Mail?
I have recently converted from MS Outlook 2007, where the maximum storage is 20 GB.
Is there any such limit in Mail?
In other words, I currently have 30,000 inbox emails and 20,000 sent emails. Together, my Outlook PST file is 2 GB. Would Mail prevent me in any way, or could I keep as many emails as my hard drive will permit?
I thank you all in advance for any thoughts and/or suggestions.

Harold,
Have you checked this in Synchronization Preview? Did you see any error?
Regards,
Manuj Khurana

HT5213 I am about to publish my iBook with photographs. It is interactive in that small images will go full screen when touched. Is there a size limit on my book? If so how many megs?

I am about to publish my iBook with many photographs. It is interactive in that small images will go full screen when touched. Is there a size limit on my book? If so how many megs?

2Gb is the max

Is there any session limit in operator?

Hi,
I am trying to run a loop thru a query, like " select col1 from table1", then in this loop I am trying to call a scenario, like : OdiStartScen -SCEN_NAME=TESTEXTRACT -LOG_LEVEL=5 -SYNC_MODE=1 "-project.var1=#col" , the query should return about 7000 rows, that means the scenario should run for about 7000 times, but the fact is in operator is only run about 60 times, and no new session produced, and the main loop is hanging there?
Is there any session limit for the operator? or any other possible resovle method for this?
Thanks

Hi ,
You can limit the number of session u can view in the Operator.
In Operator--- > File --- > User parameters = In this you can see operator display limit. In tat you can set ....
Hope this helps !
Thanks
Ananda

Is there a size limit when importing videos?

Is there a size limit when importing videos into iTunes (8)? I have a 4+ gig video file I'm trying to import, but when I drag/drop it into the movies, nothing happens. It works fine with smaller files.
thanks
Scott

ah I see something in other forums about a Windows size limit of 4 gigs, so I guess that answers it.
thanks
ss

Is there a character limit for a field in CrystalReports?

Is there a character limit for a field in CrystalReports?
Hello,
I'm trying to display a long text (+100.000 characters) stored in a MySql database in CrystalReports but CR is not showing the complete text. Is this because there is a length limit for fields in CR?
Thanks,
Eddy G.

This is not a great answer, but you can base your report on a SQL Command, then use something like this for the command(MS SQL):
select
case when length(table.field) > 65535
      then substring(table.field,1,65535)
      else table.field end as field_part1,
case when length(table.field) > 65536+65535
      then substring(table.field,65536, 65535)
      when length(table.field) between 65536 and 65536+65535
      then substring(table.field,65536, length(table.field)-65535)
      else '' end as field_part2
from table...
Then in the report, display both fields where you want the BLOB data.
HTH,
Carl

Is there a size limit to the document? I have been trying to convert a pdf to excel without success

Is there a size limit to the document? I have been trying to convert a pdf to excel without success

Is there a size limit to the document? I have been trying to convert a pdf to excel without success

Is there a size limit on the iPod for the song database file ?

I have been running into the same issue for the last 2 weeks: Once I exceed 110 GB on my iPod Classic 160 GB, iTunes is no longer able to update the database file on the iPod.
When clicking (on the iPod) on Settings/About, the iPod displays the wrong number of songs. Also, the iPod is no longer able to play any songs.
Is there a size limit for the database file on the iPod ?
I am making excessive use of the 'comments' field in every song that I load to the iPod. This increases the size of the database file.
Is there a way, that I can manually update the database file on the iPod ?
Thanks for your help !

did you experience some crashing of the ipod as well? do you know how many separate items you had?

Is there a resolution limit in CS6?

Similar Messages

Maybe you are looking for