Is there a Session End function in Cold Fusion?

In .net there's a session end function that allows you to
perform functions when a users session ends, does Cold Fusion have
anything like this? The reason I ask is I have a user who generates
multiple xml files with data and stores them to the hard drive
while they visit the site, but once they leave, I submit all those
xml files to a database and I'm trying to figure out the best way
to do this. It would be for multple users on the site. Anyone have
any ideas?

Thanks, I suppose I can do that. I've never done a scheduled
job before, but it doesn't look too difficult to setup.
Thanks.

Similar Messages

Replace Function in Cold Fusion

Hello All,
The code below does the following: It finds an item in Spanish (in this case it's GetBasket.options, 2) and add `SPA` to the SKU code.
<cfif ListContains(GetBasket.options, 2)><option value="2"><cfset basketsku = GetBasket.SKU & "SPA"></option></cfif>
How do I do the following?
The SKU code is a 5 digit code for all languages. For example: the SKU code in English is 902013, but the SKU code for Spanish is 903013. As you can see the 3rd number is being replaced with 3. It will be standard for all items in Spanish. How do I modify the code above to replace the 3rd number with 3?
Thank you all very much in advance!

not sure if you found an answer to this question but if you use the Replace function you can do this.
Replace(DB.value, 2, 3 )

Email a form without Cold Fusion

Hi everyone,
I have a client whose hosting doesn't provide Cold Fusion. on
his website, there is a form that the content must be emailed to
him after customer submission. Is there anyway to do it without
cold fusion, Cfmail command?
thanks in advance.

you can just use a regular mailto with a form, and it will
send. However the
formatting on the receiving end is somewhat of a pain in the
"Shida" <[email protected]> wrote in message
news:eo1cgi$s0o$[email protected]..
> is there any way other than CF or ASP or PHP?
> I have heard of some kinds of web forms, but I don't
know about them
> either.

What is the latest on opening Cold Fusion files? I'm still using CS 6 because of this issue.

anyone have any ideas here?
thanks !

Hi logion,
There is a workaround to open cold fusion files in Dreamweaver CC.
http://helpx.adobe.com/x-productkb/policy-pricing/open-coldfusion-dreamweaver-cc.html
See if this works for you.

Is there any BAPI or function module to delete entries from a table (VBAK)

Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK     sales document: header data
selection fields:
VBAK-LIFSK      ≠     <BLANK>
VBAK-ERNAM     =     userID used by e-Sales / IVE
          (EP-BATCH / EAI-BATCH)
VBAK-ERDAT      <=     Current system Date
VBAK-ERZET     <=     Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
Reddy

Hi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
     p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
   s_lifsk FOR vbak-lifsk DEFAULT '10',
    s_ernam FOR vbak-ernam,
    s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
    s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
   s_erdat like vbak-erdat,
   s_erzet like vbak-erzet.
DATA:
   BEGIN OF int_final OCCURS 0,
        w_vbeln TYPE vbak-vbeln,
   END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
                   INTO TABLE int_final
                   WHERE lifsk EQ p_lifsk
                     AND ernam IN s_ernam
                     AND erdat IN s_erdat
                     AND erzet IN s_erzet.
IF sy-subrc = 0.
    LOOP AT int_final.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          salesdocument         = int_final-w_vbeln
ORDER_HEADER_IN             =
    order_header_inx            = int_order_header_inx
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
        TABLES
          return                      = int_return
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
    ENDLOOP.
    LOOP AT int_return.
      WRITE:/ int_return-type,
              int_return-id,
              int_return-number,
              int_return-message.
    ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy

How do I close a connection when the session ends?

I have a website that is using JavaMail to display a user's mail through the browser. I'd like to keep the connection to the mail server open during the whole session that the user is logged in, in order to improve response time. The problem is, I can't detect if a user closes their browser so that I can close the connection to the server.
Is there a way for me to close the mail server connection when the session ends?
Thanks.

Create session listener, Impliment sessionDestryoyed
method with your connection close statements.I was wondering how to use the listener for a Servlet as well, what would you type in that method to close the connection?.
public class ServletListener
     implements
          ServletContextListener,
          ServletContextAttributeListener,
          HttpSessionListener,
          HttpSessionAttributeListener
public void sessionDestroyed(HttpSessionEvent arg0)
          //System.out.println( arg0 );
}

Flashbuilder and Cold Fusion (using application/session variables)

I would like to know if anybody uses Flashbuilder with Cold Fusion?
Since Cold Fusion has lots of different scopes of variables (application, session, client, form, url, etc...) how do you manage this in Flex/Flashbuilder?
Are there forums or groups specifically for using Flex3/Flashbuilder with backend server side technologies such as Cold Fusion?.
The only server side technology that I have interest in is Cold Fusion. I've seen basic tutorials and videos using Cold Fusion CFC's and data binding with Flex. I haven't seen or heard anything using a Cold Fusion application, session, or client variable in Flex.
Hopefully some of you have some experience on this topic.
Thanks

hey popster,
i too had this question some time ago. my entire app was built on CF with HTML before i started integrating Flex 3 with it. i found that i needed to create cookie variables for all my session variables i was using in order to maintain and remember who the user was in my CFC calls. i also found that after i compiled a flex app, i changed the .html to .cfm (the file that loads the compiled SWF file). by doing this i was able to pass CF session variables into the flex app and you can refer to these anywhere in Flex by using Application.application.parameters.{variable name here}
add the CF variable in the FlashVars line to pass it into Flex (see the last line of code). this will create a variable (in my case i'm passing session.employeenumber). then in your flex app you can reference it by using Application.application.parameters.emplid:
AC_FL_RunContent(
   "src", "Request",
   "width", "100%",
   "height", "87%",
   "align", "middle",
   "id", "Request",
   "quality", "high",
   "bgcolor", "#869ca7",
   "name", "Request",
   "allowScriptAccess","sameDomain",
   "type", "application/x-shockwave-flash",
   "pluginspage", "http://www.adobe.com/go/getflashplayer",
   "wmode","transparent",
   "FlashVars","emplid=<cfoutput>#session.employeenumber#</cfoutput"
A little trick I learned (does Adobe really expect us to re-engineer how our apps have been working by no longer using sessions for Flex?). Then in your CFCs if you also create cookies for every session variable you can maintain the variables based on user login. HOPE THIS HELPS!
-Matt

Session End in JSP

hi friends ,
is there is any possibility to capture the event of a session end from the server side.this is neede to terminate the files created during the session.so after the sessionthose temp files have to be cleared.this can be done only if we know about when a session ends.so please friends if any body can throw some light on this it will be more help full.
with regards
Venkat

If you can afford the luxury of using Servlet API 2.3, there is javax.servlet.http.HttpSessionListener
An object implementing this interface will receive notifications of the type you are loking for.
If interested read about it in the Java Servlet Specifications version 2.3

Missing netbook PgUp PgDn Home End function

on a new mini Compaq CQ10-400AC, no PgUp PgDn Home End keys, and the often suggested Fn+arrow keys have no effect.....
Is there any other way to solve this problem ?
to HP - Is this a BIOS or Win7 or hardware issue ?
I too haven't been able to find anything in the knowledgebase. Can't understand how HP wouldn't advance any further info, it's like leaving their users to torture themselves....
Has to be incredibly easy to just state the answer in response, one way or the other.
This question was solved.
View Solution.

This netbook is not equipped with Pg Up,Pg Dn, Home and End function on the keyboard....BIOS update should do the job but at this moment of all BIOS version I have tested, dont bring that functionality...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

How to get the event before the session end?

Currently i using a connection pool (dbpool). I need to release my pool when user logout or closing the browser. I have a session that keeping the user information and the connection pool manager.
How i detect the event when session end? I need to know is that can catch an event and perform release() command before the session that store login information ended.
Or have other solution to release the pool (it acually is only 1 pool, it will close the pool when no user(s) using it)

you do not need to do this.
In your db code, when you use
conn.close(); your connection will be released to the pool.
If you do not do this you will get connection pool leaks.
There is no benefit in using a pool if you try and keep a connection for a single user, the idea is to SHARE connections between many users.
If you want to detect session expiry yoyu need to use a 'session listener', if you search the forums you can easily find out how to do this.
The main thng is NOT to tie your connections up in this way, you MUST use conn.close(); to release your connections back to the pool as soon as you have finished using them.

How to fire trigger/event on session end !?

Is there a way to fire trigger or some store procedure just before session ends, but also get info from ending session (like Terminal, Machine, User...) ?

create table logoff_tbl (
who varchar2(30),
when date
create trigger trg_logoff
before logoff on database
begin
insert into logoff_tbl values(sys_context('userenv','session_user'), sysdate);
end;
/

Is there such a SQL function?

Hi,
Is there such a SQL function to implement the following function?
cancletime = cancletime>to_date('03-08-31','YY-MM-DD')?to_date('03-08-31','YY-MM-DD'):cancletime
If there is such a function, for example, named XYZ(), I can use it in the following SQL to accomplish my task.
select name, sum(XYZ(cancletime)-beginTime) from UserSubscription group by name;
Thank you very much in advance!
BR/Shirley

Or, If you are on Oracle9i:
SELECT CASE
           WHEN SYSDATE > to_date('2003-08-31',
                                  'YYYY-MM-DD') THEN
            to_date('2003-08-31',
                    'YYYY-MM-DD')
           ELSE
            SYSDATE
       END CASE
FROM   dual;Should work for Oracle8i SQL (not PL/SQL).

Front-end functions cannot be executed in the background in SM37

Hi ,
I have developed a BDC program for Tcode HRUSER . The program is working fine in Frontend but when Executed in Background through SM37 gives a error -:
"Front-end functions cannot be executed in the background".
I am not using any function like GUI_DOWNLOAD or anything like that .
Thanks
Nikhil Arya.

Hi ,
No , the program is not taking any inputs from the user .
when i am executing the program in background mode it is just showing the messages at the end which i am writing in the program for eg:
"creating a user for employee 2306328".
So , only the list of messages comes at the end .
Thanks
Nikhil Arya.

I would like to put Dreamweaver 8 on a new computer. There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this?

There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?

If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O.

There is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter in there low cost mobile

there is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter function in excel in there low cost mobile.
APPLE KINDLY PROVIDE THIS FEATURE AS UPDATE SOON,COZ I WORK ON EXCEL N NUMBERS IN MY IPAD IS DEAD WITH OUT FILTER FUNCTION,I CAN NOT TRAVEL WITH MY IPAD DUE TO THIS REASON,AS I HAVE TO BE IN FIELD WITH SALES FORCE SO I BOUGHT IPAD.

Probably you know that the new version of Numbers for iOS uses the filters created in the Numbers for Mac version.
It's not the best solution but it helps (of course, if you have a Mac!)

Is there a Session End function in Cold Fusion?

Similar Messages

Maybe you are looking for