Is there a shareware file recoverey program available?

Is there a shareware file recoverey program available for Macs?
I have an external Hard Drive with only mp3 & mp4 on it (formatted Journal Extended). The "node structure" was damaged, what ever that is, when i was using iTunes.
The program just needes to allow me to save my files to a need hard drive
Thanks

This is from the DiskWarrior site:
Question
Is DiskWarrior capable of repairing an "Invalid Node Structure" as reported by the Apple Disk Utility?
Answer
Yes, DiskWarrior can repair a "Invalid Node Structure" error.
Directory nodes contain the directory entries for your files and folders. Damage to a node renders its entire contents unusable. It also makes the nodes that are linked to by the damaged node inaccessible. That's because the links to the nodes can no longer be followed. Disk Utility reports this type of damage as an "invalid node structure."
A disk with an invalid node structure can exhibit several symptoms. Depending upon which node is affected, it could be that the disk will not appear on the desktop. Alternatively, it could be that just some of the files on the disk will be in inaccessible nodes. If the disk is your startup disk it's also possible that it will no longer start up because the necessary Mac OS files are in an inaccessible node.
Fixing a damaged node is a tricky operation. Depending upon the brilliance of your disk repair utility you might be able to repair the damaged node and even recover the file and folder entries it contains. Of course if the damage is bad enough there will be nothing in the node left to recover but the right utility can still put the directory back into working order.

Similar Messages

I have 2 concerns, first my Canon 5d Mark II is not showing up when I try to download pictures. I have to use the card reader to do so. Then there is no file handling window available anywhere. Please help. Jim R.

I have 2 concerns, first my Canon 5D MarkII is not showing up in the input source when I download to lightroom. I have to use the card reader to do so. Then there is no File Handling Section listed anywhere. Please Help. Thanks Jim R.

You should find the forum for whatever prdouct your posting concerns and ask for help there.
Here is a link to a page that has links to all Adobe forums...
Forum links page:
https://forums.adobe.com/welcome

IS THERE A APP OR A PROGRAM AVAILABLE TO SPEED UP A iMAC?

I have a IMac 27" that is running Maveriks and is about 3 years old and starting to run a bit slow. Is there a APP or a program that is worthwhile installing to clean up the system and improve speed?

I have 12GB RAM, Maveriks 10.9.2 and 668 Gb left on the Hard Drive.
Here are the results of the Program you sent.
Hardware Information:
          iMac (27-inch, Mid 2010)
          iMac - model: iMac11,3
          1 3.2 GHz Intel Core i3 CPU: 2 cores
          12 GB RAM
Video Information:
          ATI Radeon HD 5670 - VRAM: 512 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 7 days 3:24:10
Disk Information:
          WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Mac internal drive (disk0s2) / [Startup]: 999.35 GB (668.18 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          OPTIARC DVD RW AD-5680H
USB Information:
          Logitech USB Receiver
          American Power Conversion Back-UPS BX1500G FW:866.L1 .D USB FW:L1
          Apple Computer, Inc. IR Receiver
          Apple Inc. Built-in iSight
          Apple Internal Memory Card Reader 31.91 GB
                    NIKON D3200 (disk5s1) /Volumes/NIKON D3200: 31.91 GB (11.88 GB free)
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
          [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
          [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          Garmin Express Service
          Solar Service
          AdobeResourceSynchronizer
          TuneupMyMac
Internet Plug-ins:
          Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 3rd-Party support link
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 13.0.0.201 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 3rd-Party support link
          Silverlight: Version: 4.0.51204.0 3rd-Party support link
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          Java 3rd-Party support link
Old Applications:
          /Applications/iWork '09
          Garmin Map Update:          Version: 4.5.1 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/Garmin/Garmin Map Update/tmp/Garmin Map Update.app
          Solar App:          Version: 1.0.40 - SDK 10.5 3rd-Party support link
          Garmin WebUpdater:          Version: 2.1.3 - SDK 10.4 3rd-Party support link
          Solar Service:          Version: 1.0.40 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/Logitech/SolarService/Solar Service.app
Time Machine:
          Auto backup: YES
          Volumes being backed up:
                    Mac internal drive: Disk size: 930.71 GB Disk used: 308.43 GB
          Destinations:
                    BACK UP [Local] (Last used)
                    Total size: 2
                    Total number of backups: 53
                    Oldest backup: 2013-08-12 20:00:51 +0000
                    Last backup: 2014-04-16 15:49:19 +0000
                    Size of backup disk: Adequate
                              Backup size 2 > (Disk used 308.43 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               2%          EtreCheck
               1%          WindowServer
               1%          App for Facebook
               0%          SystemUIServer
               0%          mDNSResponder
Top Processes by Memory:
          418 MB          App for Facebook
          184 MB          mds_stores
          160 MB          softwareupdated
          160 MB          Finder
          86 MB          Preview
Virtual Memory Information:
          5.39 GB          Free RAM
          2.58 GB          Active RAM
          2.55 GB          Inactive RAM
          1.15 GB          Wired RAM
          6.03 GB          Page-ins
          588 KB          Page-outs

Is there a S4 Factory Restore program available?

I am having a firmware issue with my device and need to get it back to the original configuration.
Does anyone know of a Restoration Program which is available to accomplish this?
This is more than going into the device and selecting reset to factory specs.
Thanks

Samsung has some sort of software upgrade Assistant program that you can install on your computer when you plug the phone to the computer via the USB cable supplied with the phone. I don't know how it works though.

Are there any professional tax preparation programs available for Mac?

After seeing how much I love my Intel iMac, my dad really wants one. He does book keeping and tax preparation for his clients from home, so he would need some type of tax software that would work with a mac.
Keep in mind, he would need professional level software, like Taxwise. Home tax programs like Turbo Tax or Quicken wouldn't work. He needs software for e-filing, form generation, refund loans, etc.
Do you guys know of any?

Take a look at this link, http://www.logitech.com/en-us/product/wireless-wave-combo-mk550?crid=27&affid=31 60356
This link, http://www.amazon.com/Kinesis-KB500USB-BLK-Advantage-Contoured-Keyboard/dp/B000L VJ9W8/ref=sr_1_2?ie=UTF8&qid=1357225947&sr=8-2&keywords=kinesis+advantage+pro

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Is there any Program available to Copy a package from one System to Another

Hi all,
Is there any Program available to Copy a package from one System to Another ?
Thanks in advance
Raghu ram

Hi,
Put the Package into a TR using transaction SE80.
Provide the TR no. to BASIS consultant & ask him to provide the file of that TR.
Import the TR file in another system.
Thats it.
Best regards,
Prashant

I have numerous music movie clips that I have not purchased through iTunes, can I stream these "home" movies to apple TV? And if this is not possible, is there another complete program available that I can purchase to have my music movie clips stream to a

I have numerous music movie clips that I have not purchased through iTunes, Is it possible to stream these "home" movies using iTunes to apple TV?
And if iTunes will not allow it, is there another complete program available that I can purchase to have my music movie clips stream to a TV and/or another computer?
Any help would be appreciated. Thanks

Thanks, Winston C, I've actually tried everything you suggested. I'm thinking now that the Home Sharing problem likely is related to Bonjour--I've seen several people mention this with similar (but not identical) problems. The solution that seems to work for some people is to uninstall and reinstall Bonjour. Frankly, I don't want to go through the trouble given that the iOS 7 release is imminent.
One thing that I haven't tried is resetting the ATV to factory settings. I'll give that whirl.
Thanks for your advice!

Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site

Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site without success.

The Elements 12 shortcut can't find the Elements12.0.exe file so the program will not load. I can load the editor from its .exe file but not the organizer.

Programs that require a network connection won't work because there is no virtual IP address available for this session.

Programs that require a network connection won't work because there is no virtual IP address available for this session. Per application IP virtualization is enabled.
There are in fact available IP address's within the dhcp scope. Before I dig to deep into root cause.. Could the problem be RDS CAL licensing running out, or isn't that not a symptom of my error message?

Hi,
Thank you for posting in Windows Server Forum.
As per my research, there is no any issue related to RDS CAL licensing. Prior to the issue which you are facing, there are some basic setting which need to configure.
Application Compatibility – Turn on Remote Desktop IP virtualization
Some applications require a unique IP address, which is by default logically not the case if the application is running on RD Session Host. To solve this issue, Remote Desktop IP Virtualization is introduced. With this setting you enable the IP virtualization
feature. When enabling this setting you need to specify if the virtual IP is provided per session or per program. When using per program you need to define the executable to which an IP address should be configured. Desktop IP virtualization also needs the
configuration of the next setting.
Application Compatibility – Select the network adapter to be used for Remote Desktop IP Virtualization
When you need to use Remote Desktop IP virtualization configuring this setting is mandatory. You need to specify the IP address of the Network Interface Card which should be used for this feature. Besides the IP address you need also to specify the network
mask using the slash notation, for example 192.168.77.201/24.
Application Compatibility – Do not use Remote Desktop Session Host server IP address when virtual IP address is not available
More information:
Microsoft RDS Policies explained (Part 2)
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/microsoft-rds-policies-explained-part2.html
Configuring Remote Desktop IP Virtualization II
http://blogs.msdn.com/b/rds/archive/2009/07/15/configuring-remote-desktop-ip-virtualization-ii.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Is there any script or batch program that can pick a xml file...

Hi,
Is there any script or batch program that can pick a .xml file from a folder and place it in a different folder on the same directory periodically without using an XI interface.
Thanks,
np

Hi Nadini,
Please refer below link for how to sechdule a batch file.
[Schedule Batch File-How to?|http://www.tech-archive.net/Archive/WinXP/microsoft.public.windowsxp.general/2006-04/msg01349.html]
And please refer below links for how to write a batch file and other one as batch file commands.
http://www.wikihow.com/Write-a-Batch-File
http://www.aumha.org/a/batches.php
these two links was a click away in google :).
regards
Aashish Sinha

Zip 7 says there is no default email program. How do I make gmail my default email program so i can zip and mail files using zip 7.

Can't use zip 7 to zip and send files. Keep getting error message
There is no email program associated to perform the requested action. Please install a program or if one is already installed, create an association in the Default Programs control panel. There is no mail program in the default programs control panel. There's no file to associate with it.
I'm getting very frustrated. I have school files that need to be emailed and I can't figure this zip7 out
Any help would be appreciated.

Hi CB01,
Thank you for your question. I understand that you need to set up a default mail program to mail zip 7 files.
In the Control Panel of your operating system there are file extensions that you can set a default program to use for mailing.
*[http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7]
In order to add a mailto option in Firefox[[Set how Firefox handles different types of files]]

Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

The operation cannot complete because there isn't enough memory (RAM) available

Illustrator CS5 Verison 15.1 on a MacBook Pro Retina, 15-inch, Early 2013 Processor 2.7 GHz Intel Core i7, Memory 16 GB 1600 MHz DDR3,
Graphics NVIDIA GeForce GT 650M 1024 MB. Illustrator opens .ai and .pdf files. When I try to open a .dwg file, I get the following message, “The operation cannot complete because there isn’t enough memory (RAM) available”. I have been using the program for some time to successfully open .dwg files. This is a recent occurrence and I have not made any changes to the hard drive other than installing OS 10.9

Have you already opened that specific file at some former time?
Have you already tried a restart?
Apart from that:
Illustrator CS5 cannot use more than 3 GB of RAM, no matter how much is installed. OS 10.9 causes all kinds of problem even with newer versions of Illustrator.

What P2P file sharing programs will work with 10.4?

I tried downloading utorrent, vuze, frostwire and a couple others but they said java had an error or it needed to be at least version 6. but when i tried to update java it didnt install and jsut stayed at 5. are there any file sharing programs that work with java 5 and OS X 10.4? Thanks!

I'm not on 10.4 at the moment, but there saare APPs that work if you can find them, but if you can upgrade then that would be even better...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6.
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
http://store.apple.com/us/browse/home/shop_mac/software/apple?mco=OTY2ODUzOA

Is there a shareware file recoverey program available?

Similar Messages

Maybe you are looking for