Is there a solution to the Bluetooth dropping out and disappearing on Lion 10.7.5?

Always drops out and disappears from preferences panel. There is a lot about this on the comunity but i have yet to discover a solution. Anyone?

You managed to place an item in the toolbar that has since been trashed. The solution is simple. Right click (or control click) on the toolbar and select Customize Toolbar... Now you can drag the question mark off the toolbar and release the mouse button. It will poof (disappear).

Similar Messages

TS1559 is there any solution to wifi & bluetooth, not working in 4s post IOS 7.0.4 update?? pl require a solution badly !!!

is there any solution for wifi & bluetooth (gone grey), not working in 4s post IOS 7.0.4 update?? pl require a solution badly !!!

If they are grey then the WIFI card has gone bad at this point, service would be needed

Is there a solution for the missing letter in the Arabic keyboard , IPhone 4s Os 5??

Is there a solution for the missing letter in the Arabic keyboard , IPhone 4s Os 5??

Please specify the letter you think is missing. You should be able to find all letters you need by holding down keys which generate popup menus to give you additional options.

Is there a solution for the limited time of videorecording?

Is there a solution for the limited time of videorecording?
By recording on my iPad2 there is a maximum time of 49 minutes and 51 seconds.

Hello Studio X
I have an iPad2 with 64 GB. After I start the videorecording it stops automaticly by 49 minutes en 51 seconds.
I looked in my settings and there was still enough space left. Although I do not think that the 64Gb is not the problem.
I bought myself an alternative recording app now. I hope it works properly but if the quality is OK. I do not know. I combine the recordings with my video (digitaltape) camera of Sony.
Thanks for your reply
sozave007

My mac book gives electric shock through its entire body while being charged from AC out let. is there a solution to the problem? my other two friends are haveing the same problem who recently have purchased the same note books, its weird for APPLE

My mac book gives electric shock through its entire body while being charged from AC out let. is there a solution to the problem? my other two friends are haveing the same problem who recently have purchased the same note books, its weird for APPLE products. Please give any solution.

Is the MBP properly grounded? Are you using the three prong plug? If not, do so and your problems may disappear. If not, do what SwankPeRFection suggests.
Ciao.

Is there a solution to the problem of frequent suspension automatically??

Is there a solution to the problem of frequent suspension automatically??

No No No No I'm talking about completely shutdown

Is there any solution to the colon translation bug?

Mac OS X has reserved characters that cannot be used in file or folder names. One of them is the colon: It is used by the operating system in paths to designated separate directories and files, exactly as Microsoft uses the backslash character for the same purposed.
However, Mac OS X is 'supposed' to translate colons to another character when saving files from within an application or the Mac OS X Save dialog. The typical translation is to forward slash or dash. For example, "Bug: Colon Translation" becomes "Bug- Colon Translation". Of if I am saving a web page to a PDF, the source name of an article with this title would change to "Bug/ Colon Translation".
The bug: The above colon translation process does NOT work reliably in the Mac OS X Save Dialog with reliability. I guestimate that 95% of the time the translation of colons in source titles does NOT work. Using the example of translating a web article title to a PDF saved file, the results are typically the following: "Untitled.pdf". This forces the user to copy then paste in the actual title of the article. THEN, 100% of the time, the colon translation actually works. For example, if I have a web article titled "Bug: Colon Translation", it is extremely rare for that title to be anything but BLOCKED, resulting in 'Untitled.PDF' as the resulting title in the dialog box. When I then copy and paste the source title into the title area, replacing 'Untitled', I get: "Bug- Colon Translation".
What will happen perhaps 5% of the time: The colon translation of the source title will actually work. When this occurs, using my example above, the OS provides the following translation: "Bug/ Colon Translation". Note that when it works in this situation I get a forward slash, not a dash.
I research, read and save web articles all day long. A lot of articles use colons. I have to contend with this bug all day long every day. This bug is many years old. I can't recall when it started. But it certainly has been consistent in Mac OS X 10.5 Leopard, 10.6 Snow Leopard and now 10.7 Lion. Three versions of Lion are enough for me to realize that Apple is either oblivious to this bug or they don't care.
Clearly, the colon translation CAN work. It is MEANT to work. No one can dispute that. The user is NOT supposed to be messed over with 'Untitled.PDF' files. They are MEANT to have actual PDF file titles, as seen in our example above.
Therefore the question:
Is there any solution to the colon translation bug?
It is incredibly annoying.

My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion.

I suffer from the problem of cutting picture and sound when Link Mac Pro with the TV via the Apple TV Is there a solution to the problem

Have trouble cutting (the delay) picture and sound when Link Mac Book Pro with the TV via the Apple TV Is there a solution to the problem.
(this problem is when I follow films in the sites and forums or watch the live broadcast of certain programs by using the browser Safari)
I want a solution TV Apple made meI feel disappointed

Has anyone else encountered or solved this problem? Same thing is happening for me with a new MacBook Pro, 13" i7 and an Echo Audiofire 4. It's not even clear to me from searching if this is the processor idling or the firewire port hardware. Only thing clear to me from testing is that it does have something to do with using an audio interface - I don't get this noise plugging in my external hard drive, but I still hear it if I daisy-chain the hd through my interface. Any help or recommendations appreciated - do pc firewire ports have this issue too?

Is there a possibility that the Bluetooth send some content to other mobile phone brands (Nokia, SonyEricsson ...)

Is there a possibility that the Bluetooth send some content to other mobile phone brands (Nokia, SonyEricsson ...)

You can only send Top Secret Stolen Documents by bluetooth, nothing else .

Is there a solution to the problems created when I up rated my iPad2 to IOS8?

IS there a solution to the problems created when I uprated my iPad 2 to IOS8?

Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
This is a troubleshooting methodology that you are going through. See it through to the end.
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

I forgot my icloud account Is there a solution because the two hanging on block screan

I forgot my icloud account Is there a solution because the two hanging on block screan

Try this:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Click "fFnd my Apple ID"

How I got the Bluetooth Magic mouse and Aluminum keyboard to work in XP

NOTE: The following steps fixed my issue. I thought I would share what worked for me but I really don't ever visit these discussion groups. I used a combination of Sysinternal tools to isolate what was causing my issue and rectified it.
I couldn't for the life of me get the bluetooth magic mouse and keyboard working in a bootcamp'd windows xp. Here are the steps that I performed to finally get it to work. The assumptions are that you are running a clean XP build with SP3 and all windows updates installed.
1. Using a USB mouse and keyboard. Insert the OS X install disc into the drive and run through the bootcamp drivers install. (These steps are outlined at Page 12 in the Apple Boot Camp Installation Guide: http://manuals.info.apple.com/en/bootcampinstall-setup.pdf). Let the installers run per apple instructions in the bootcamp installation guide. At the end it will want to reboot. Reboot the system.
2. After the system reboots login and run the Apple Software Update utility to update from bootcamp 3.1 to 3.2. It will run through a bunch of installers and ask to reboot at the end. Reboot.
3. After the system reboots login and go to start=>run and type "services.msc" to bring up the services control panel.
4. Double-click the "Bluetooth Support Service" to open the properties.
5. Go to the "log on" tab and look to see what is set. If it is set to "NT Authority\LocalService" then click above it to change to "Local System account." Then click "OK." It will tell you the changes won't take effect until the service is restarted. No worries.
6. You will be back in the main services control panel. Make sure the "Bluetooth Support Service" is highlighted and look up to the left and select "restart the service."
7. Close all the open windows and then go to start=>run and type "control panel" and hit enter.
8. Double-click the "Bluetooth devices" control panel applet and follow the Apple instructions provided on Page 18 of the guide referred to earlier. Start with the mouse first. Stop when done with the mouse and don't continue on to the keyboard yet.
9. At this point my mouse was "installed" but did not show "connected" in the bluetooth devices applet. I then highlighted the mouse and clicked the "properties" button down to the right.
10. Once in the properties of the mouse I selected the "services" tab. My issue before making the switch to "Local System" account for the Bluetooth services was then when I tried to click the check box to enable "Drivers for keyboard, mice, etc (HID)" I would get an "access denied" error. Now that the switch has been made you should be able to click that check box without error. Click OK after enabling.
11. You will suddenly see systray (lower right of the screen where the clock is) saying that new hardware has been detected and enabled. Once this is all done you will see "connected" below the device in the Bluetooth applet. Give your mouse a go. It should be working now. Sweet!
12. Follow the steps in the Apple guide for your keyboard. This should work too now. Sweet!
Best of luck.

It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should.

The cover of the case dropped out of hands at installation.

Sorry for wrong english. When clothing cover on the computer case the roof dropped out of hands and, probably, touched elements on a motherboard.
There quite small radioelements therefore with the naked eye it wasn't succeeded to define were located, whether something came off there. Such question: if something flew away, it will be noticeable right after turning on of the computer or can be expressed in deterioration of work of a motherboard (for example, qualities of a sound)?

Quote from: XFM on 06-October-13, 07:23:40
I don't see any visible damage even though most of your pictures are out of focus and not very clear.
I compared your pictures to other picture of the same MB and yours is the same so any parts that appear to be missing were never there to begin with. The empty contact pads came from the factory like that so there is no problem in that respect.
I stand by that conclusion and same as what bb2k says.
Good pictures 2nd time by the way, no damage what so ever can be seen.
Quote from: XFM on 11-October-13, 04:19:18
If you're having performance issues then start a new topic regarding that. List your components you have installed, refer to my signature below for example of what to list and then describe the problem(s) you have. So far you have shown no damage to MB that could be causing any problems. If you suspect any other small components on the MB that you think might be damage then post pictures of them.

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. help

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button

I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button.
I tried connecting the device to my computer and itunes said that it could not identify my device.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Is there a solution to the Bluetooth dropping out and disappearing on Lion 10.7.5?

Similar Messages

Maybe you are looking for