Is there a way to assign sounds to individual key strokes.

Would like to have letters on keyboard strike different musical notes as a reinforcement for learning to type. Any ideas?

Ok Wharf rat,
Here's the app. As of yet, I haven't been able to get the app to remain active while word is open, but I did put in a box to type, save, and open text files so let me know if that will work for you. I used your higher and lower idea for each set of keys, so the the home row A is a middle C and continues the scale until the apostrophe. Then upper and lower keys are 2 octaves away from the home row in their respective directions. I also set the app so that a different instrument besides that grand piano is used when a key pressed is lower case. Let me know if you need anything else/ if you like the app. Good Luck!
http://home.comcast.net/~jigipistachio/MusicNoteAssociation.zip
--Justin S.
P.S. I'll email it to you as well...

Similar Messages

  • Is there a way to assign an "outgoing" email sound for a PC using mozilla?

    I have a incoming email notification sound. Is there a way to assign a sound when i send an email from a PC?

    Not that I am aware of, but why would you want one. You have a sending dialog in front of you until the mail is gone.

  • Is there a way to record sounds from keyboard as they are?

    So I have a musical keyboard that I've attached to my macbook to record in Garageband. I have a ton of sounds on my keyboard from percussion, brass, piano, etc.
    When I record, for example, a trumpet sound from my keyboard into Garageband, Garageband just records the notes using its one version of trumpet or piano or whatever.
    How do I get GarageBand to just record the sound as is?
    I tried the "real instrument" track option but that ends up record all sound from the microphone on the MacBook and not recording the sound through the MIDI connection.

    goneil wrote:
    Is there a way to record sounds from keyboard as they are?
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • HT2500 Why is there no way to assign Junk Mail to a Spam file in my Yahoo?

    Why is there no way to assign Junk Mail to a Spam file in my OSX Mail App - Yahoo account. I can do it online at Yahoo, but not thru OSX Mail App? And why is there no 'NOT JUNK' button to restore items mistakenly sent to Junk Mail? There is in the G-mail file on the App (I think!).

    There normally is a thumbs up button in the top of the e-mail which allows you to mark it as not junk. The screen shot shows a thumbs down, but replace that with a thumbs up.

  • Is there a way to assign CPU limitations to a specific software ?

    Is there a way to assign CPU limitations to a specific software ?
    For example.. when I launch a render.. I don't care if it takes 4hours or 6hours... I prefer that some CPU is kept free so not to slow down the rest of my activities during the day. Is there a way to assign to a specific application a maximum in CPU usage? Or maybe just one core?
    Obviously I am asking this for applications that don't have this option internally... I've seen some that let you choose single or dual core for example.
    Is there an external software (?) a OS setting (?) or so to do this?

    I found this where they also speak about RENICE...
    http://hints.macworld.com/article.php?story=20110131001708255
    To me is greek.. but seems ok.. I don't understand if the other CPU is freed for other apps or is  "blocked" in some way (making this useless for my needs)

  • Is there any way to assign colored labels to events?

    Is there any way to assign colored labels to events without having to create numerous calendars?

    You can use numactl to lock any process to a NUMA node, but that only helps if your machine really is NUMA (AMD Opteron servers are, Itanium systems often are).
    You should be able to enumerate nodes using:
    numactl -H
    And lock the process to a node using for instance:
    numactl cpubind=$node_num membind=$node_num java MyClass
    It is hardware dependent how many CPUs and how much memory you have per node. A common number of CPUs is 1-4 sockets.
    Regards -- Henrik

  • Is there a way to create a custom shortcut key to paste my email address?  I would like to be able to press a key combination that will paste whatever I set it to, i.e. my email address.

    Is there a way to create a custom shortcut key to paste my email address?  I would like to be able to press a key combination that will paste whatever I set it to, i.e. my email address.

    There are multiple ways to do similar things. One, built into the system, is to use text replacement. See:
    http://www.tuaw.com/2009/12/31/mac-101-making-text-replacement-work/
    There are other programs you can buy that can do the job in different ways, such as TextExpander. You could also just create a clipping file by dragging your e-mail address to somewhere like the desktop, and then you can simply drag that file to wherever you like to insert your e-mail address there.

  • HT204406 Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

    Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

    Begin by tapping on the Settings app.
    Scroll to the Store menu and tap that.
    This is where you can manage your Automatic Download settings. You can control Music, Apps, and Books (if you have the iBooks app installed) here. Slide to On any of the kinds of files you want iCloud to automatically download to your device.

  • Is there any way to find whether the private key is capable of 40 bits encr

    Is there any way to find whether the private key is capable of 40 bits encrypted or 128 bits encrypted.

    kanth_kanth wrote:
    Is there any way to find whether the private key is capable of 40 bits encrypted or 128 bits encrypted.Assuming an RSA private key, to get the number of bits extract the length of the 'modulus' in bytes and multiply by 8. How you extract the modulus depends on what format the private key has been stored in.

  • T530 - Is there a way to program the "Fx" function keys to do what missing keys did?

    T530 - Is there a way to program the "Fx" function keys to do what missing keys did? Print screen Break, etc? Running Windows 7 Professional

    Hi,
    Welcome to Lenovo Community Forums!
    Check in BIOS -> config -> Keyboard if there is an option to switch between default and legacy mode.
    If you don’t find that option, you may try the Fn+esc combination that changes the function keys to legacy mode, but when the computer reboots, it might reset back to a default mode and you have to use Fn+esc again.
    Hope this helps!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I've connected my ipad to my TV via hdmi but cannot get sound. Is there a way to get sound from the TV?

    I'd like to get sound from the tv for my keynote presentations. Is there a way to do this via the hdmi connection? Or do I need to connect an 'audio-out? Thanks in advance for your help

    the hdmi should transfer both sound and picture
    http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k?fnode=a8e08a2bb3c16bf3cd606aecff68b12c10fe327cd7b063c9bbc492e57158bbfa0778 d5b941eb2a8c1c5f2e25e51cf7b82e193c9a722651b3fc2694996f7b5281b8bf4338c46284247b76 ccce6907fa6caee062d974158ee4d0336fca558384426e7a6c6cbf3ee58c8f53f8db53c9ef91
    Supports multi-channel digital audio output on compatible devices
    make sure your ipad is not muted
    make sure you volume is not all the way down
    make sure audio play out of the ipad when not connected to the hdmi adapter
    if you did and it don't work then it's likely an issue with the connetor
    or the tv or it's settings

  • Is there a way to assign the default font for font substitution?

    I use PsCS3 at home and work. I took some work home today, and SHOCK, I didn't have any of the same fonts I have on my Mac at work. Right now, I'm laboriously changing all my type layers one by one to a suitable replacement font on my PC. There's got to be a better way - more suitable to a lazy sod like me, right?
    The perfect solution would be to assign the font I want to use for the default substitution font (which is Myrid Pro). I've searched everywhere, but have come up with nada. Is there a way to change this default font to one of my selection?
    Any tips to help out will be greatly appreciated. Thanks!

    You can change all the type layers at on by selecting them all (Ctrl+click on each or Shift+click a range) then make the change.

  • Is there a way to recover sound from recorded video?

    I went to a concert a few days ago and recorded some videos to find out the next day that the sound wasn't recorded. I tried making another video and the mic works fine. The speakers and mic you talk into work fine too. So is there any way to recover the audio part of the video?

    not likely if a finger was blocking the mic or the likes then no audio was ever added to the video

  • With GREP, is there a way to assign a character find/change to a p style?

    I'm looking for more ways to automate text styling in the magazine I produce. In InDesign, I can assign find/replace command strings in the Find/Change GREP window, but I've found no online source that tells me how to find/replace characters using GREP WITHIN a p style. It seems as if the latter GREP capability is limited to changing character styles and can't search and replace actual characters.
    Example: I have a list of recipe ingredients. I want to replace the quantity (one to three digits) at the beginning of each ingredient with a tab-digit(s)-tab combination. In Find/Change, I can enter "\d+\s" and replace with "\t$0\t" but I don't see a way to assign that capability to a p style. I want this find/change to occur automatically any time copy is added to text tagged with the Recipe Ingredients paragraph style, so I don't have to keep running a Find/Change each time we edit the page. One power user has told me it's not possible. Any insight or alternative solution would be much appreciated.

    Your power source has it right, GREP Styles can only apply character styles to the text it finds.
    And there is no easy way to have text replaced automatically -- you would still need to run a script, or press a hotkey or something.

  • Is there a way to Assign Values in many rows based on search values in APEX.

    I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using a tabular form in APEX. My main aim is to assign auditors based on Region, not equal to Processed by.
    Any support on this will highly be appreciated.

    There are company-internal resources for assistance with company-internal issues.
    There are MOS forums available through a MOS login, readability limited to anyone with a MOS login, so that one is quasi-public.
    ... then there are these public-readable forums-dot-oracle-dot-com that are for the generic user community -- readable to anyone in the world regardless whether logged in or not.
    I think you may need to take some time to get familiar with where you need to seek help for each individual occasion.
    In the mean time, I have arranged to have this thread locked.
    The text in it may help others in the future to pause for a moment before joining and posting.

Maybe you are looking for