Is there a way to create new keywords that are NOT subcategories of other keywords in PSE Organizer?

I would like to create a new keyword in the Organizer that is not a subcategory of OTHER.
Specifically I would like to create the keyword PETS, which could in turn have subcategories of different pets.
Currently the only way I can do this is to create PETS as a subcategory of OTHER which I would prefer not to do.
If this can be done, please advise me (in detail) how this can be done.
I am using PSE13 with Windows 8.1 (64-bit) as my OS.
Thank you, in advance, for your assistance.

Hi,
Have you tried selecting New Category from the drop down list?
Brian

Similar Messages

  • Is there a way to only view photos that are not already in an album?

    Not much more to say than, what is in the subject.
    I have gotten behind on organizing my photos in to albums, and I would love a method to view ONLY the pictures that have yet to be added to album. Especially useful would be if that un-albumed picture would then disappear from that view, i.e. where I could have a pile of pics that would diminish to zero once I had filed them all properly.
    Any tips?

    Create a smart album with the criteria "Album is not any"
    LN

  • Is there a way to create a playlist that will not play the songs when shuffle is selected?

    I created a playlist of children's songs to play in my kindergarten classroom.  I placed these songs in a specific playlist so I could easilly access them when needed.  Problem is, when I'm working out, I don't want these songs to pop up in my "shuffle" mix.  How do I designate this playlist to only contribute songs when selected?

    You can also set the "Skip when shuffling" property of the children's songs to Yes. Select the songs, Get. Info., look on the Options tab.
    tt2

  • Is there a way to create new events on the new iPhoto app?

    Is there a way to create new events on the new iPhoto app?  I seem to only be able to create albums.  I would really like the app to allow me to do all the same things that I was able to do on my Mac.  I would create events and then sync to all devices.  Can someone please instruct me on how to create new events from the photos imported from the photo stream.
    Thanks for all the help!

    The iPhoto for iOS seems to be aimed at working on photos then sharing them to social media sites or to iCloud for sharing there. iPhoto for iOS does not perform many of the organizing tasks that iPhoto on your Mac does. Many people expected that there would be more capabilities in iPhoto for iOS that would allow it to work more closely with iPhoto on your computer but this is not the case. They are separate apps.

  • All my photos on my phone are in 1 album. Is there a way to create new albums and move some pictures to them?

    All my photos on my phone are in one album. Is there a way to create new albums and move some of them?

    With photos transferred from your computer, you create the albums or folders on your computer.
    If you manually manage photo storage on your computer, create a parent folder that will store the named folders of photos you want transferred to your iPhone. Place the named folders of photos in this parent folder and select the parent folder under the Photos tab for your iPhone sync preferences with iTunes followed by a sync. The folders of photos inside of the parent folder on your computer's hard drive will be transferred to your iPhone as separate albums. To add an additional album of photos to your iPhone, place the folder of photos in the parent folder followed by a sync. To remove an album of photos from your iPhone, move the folder of photos outside of the parent folder followed by a sync.

  • Is there a way to create a button that links to a website?

    Is there a way to create a button that links to a website?
    I was reading up that it's possible to this with menus, and tracks but can you do it with a button and how?
    I am hoping to create a button that people viewing my discs on a computer can click on the link and their web browser will pop up and take them to a website.
    Any help is appreciated.
    Thanks.
    -Fraky

    dvd@ccess questions are being asked once a week on this forum, so I'll repeat why it's useless:
    - Mac users have to enable the feature in the preferences of DVD Player in order to for the links to work.
    - PC users have to install a small application on their PC, and they have to reboot the PC in order for the links to work.
    - On top of this, it's still unreliable, and may not work on some computers.
    It's a dog: Don't use it.

  • Is there a way in iTunes to "stich" or combine songs?  Example Journey's Anytime and Feeling That Way are always played together.  Is there a way to combine them so they are not separate songs?

    Is there a way in iTunes to "stich" or combine songs?  Example Journey's Anytime and Feeling That Way are always played together on the radio.  Or ZZ Tops Waitin' For the Bus and Jesus Just left Chicago are always played together. Is there a way to combine them so they are not separate songs?

    Not in iTunes.
    Are these ripped from a CD?
    See hhgttg27s post here
    -> https://discussions.apple.com/thread/6867148
    If not, you will need to use another application to combine them such as this script...
    -> http://dougscripts.com/itunes/itinfo/jointogether.php

  • Is there any way to create new decorations in LabVIEW 7.1?

    I've been reading the discussion threads, and now have a pretty good idea about how to programmatically manipulate the color and visibility of LabVIEW decorations.  The available decorations, however, are fairly limited.  Is there any way to create custom decorations?

    You can't create new decorations, but you can import vectoric images (from Office, for example) and use them as decorations (although you can't control their color).
    See here for some examples.
    Try to take over the world!

  • Is there a way to create a function that concatenates

    Hello,
    I constantly find myself needing to create a forumla tha concatenates employee's ID, last name, and first name.  Is there a way to create a function in Crystal that will allow me to create a function that already has this concatenation in place?  I am using Crystal XiR2.
    Thanks,
    Z

    Hi Zack,
    Custom function is a function that can be used in any report and it doesn't depend on database. We have to provide the values in order to claculate what we want and basing on the values provided it calculates accordingly. We cannot use global variables in custom functions and also evaluation time functions (like whileprintingrecords,whilereadingrecords). So I think it is not possible to get the strings concatenated without passing the values.
    Alternatively you can go for a query using Add Command like this
    select IDFirstNameLastName as value from table
    Regards,
    Raghavendra

  • Is there a way to create new Barcodes for Adobe Printforms

    Hi All,
    As far I know there is currently no way to add new barcodes to the Adobe designer..SAP Note #430887 says the same..
    Can I get any exact SAP note which states that adding new barcodes is not currently possible..
    If there is any way we can do this please let me know..
    Appreciate your time..
    Thanks,
    Sethu

    Hi,
    I hope this will help you.
    MW6 Barcode DLL for SAP R/3 is compatible with SAPsprint and SAPlpd, it allows you to print 1D barcodes.
    Example:
    Code39, Code128, EAN13, EAN8, UPCA and UPCE,
    PDF417, DataMatrix, Aztec and QRCode virtually on any windows printer from SAP R/3 system.
    TBarCode/SAPwin is a Barcode DLL for SAP R/3, SAP ECC and mySAP ERP. This barcode DLL extends SAPsprint, SAPlpd and SAPWIN DLL with barcode printing features.
    TBarCode/SAPwin prints ALL common linear and 2D bar codes on all Windows printers.
    Costly barcode equipment like barcode cartridges, barcode fonts or barcode printers are avoided! TBarCode/SAPwin works with SAPscript, ABAP and SmartForms. All SAP-forms are supported without modification.
    Thanks

  • Is there a way to create a rule that sends and Auto Response for a shared mailbox?

    I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
    [email protected]
    [email protected]
    [email protected]
    I would like to create a rule that would send an auto response when someone emails one of these addresses.  However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
    Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
    Nate

    Hi 
    we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
    1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
    2. Configure the Outlook account for the shared mailbox in Outlook.
    3. Click Rules > Manage Rules & Alerts.
    4. Create a rule like the following format:
         Apply this rule after the message arrives
         Have server reply using a specific message
         Except if the subject contains specific words
         Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
    5. Apply the auto reply rules for this shared mailbox.
    Then users can receive auto reply of the shared mailbox except the exceptions we have set  when they send messages to this shared mailbox.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

  • Is there a way to create a guide that can't be cleared or removed?

    We are trying to create master logos that would have the name on it made with guides. This would give us a quick way of seeing if the master was placed. Can the guide be set so if someone clears guides this one would not be cleared? I think I know the answer just hoping someone might know of a way to do this.
    Thanks in advance.

    if the guides are on a locked layer they wont be deleted with the Clear Guides menu command.
    you can put your guides in a templated layer. the user can still unlcok the layer and delete them, but it would have to be more conscious.
    what i've done in my office when i need the same guide in every document is i made a script that creates this guides. so when someone delete them, it only took me a second to recreate them.

  • Is there any way to create a field that will auto increment i.e. document request id field?

    I would like to have a "Request #" automatically assigned to a form.  Is there any way to do that?

    We currently don't support this type of field. You can vote for this feature request here: http://forums.adobe.com/ideas/1047
    We use this to help prioritize our work.
    Randy

  • Is there a way to create a button that works the same as the ImageField?

    I am trying to create a button that acts like the ImageField tool. I want to be able to click on the button and it will direct me to browse for my photo that I want to attach.
    I am using LiveCycle. (I am a nooby and have limited skills when it comes to script)
    The ImageField function is to complex of a function for the use on my IPAD (PDF Expert APP). I can create a photo button using Adobe Form Creater and it works fine with the below script:
    event.target.buttonImportIcon ();
    This is a mouseup Action Event.
    My form that has been created in LiveCycle works perfectly on my IPad, except the photos. If I can simplify the function of the photos to act more like the Adobe Form Creater tool, then perhaps it will all work together.
    Any ideas, or is this just a waste of time? I have created the form over using Adobe Form Creater, but it has some limitations that make it not function as nice as LiveCycle's form.
    Thanks

    Not in Acrobat unless your image is already in the PDF format.
    This is a feature of forms created with LiveCycle Designer.

  • Is there a way to search for photographs that are missing?

    I have discovered that some shots that I thought had been imported from iphoto are in fact missing (when I go to open them there is a badge with the yield sign and an exclamation point in it)
    I don't think this is the end of the world as I have the original files in various places and can import them (I guess)
    but is there a way to search to find all the shots that are missing?
    right now I'm having to scroll through the whole database in the list format and I have a lot of shots. can't seem to figure out how to do a search for missing shots…
    m

    1. Create a smart album and in the drop down in the top right corner select file status
    2. Check mark the file status box and select 'Offline'
    Now you should have all your 'Offline' (Yellow Exclamation and/or Red Slash) files.
    To reconnect..
    1. Select the missing files.
    2. Go to File and scroll to Manage Referenced Files
    The dialog box will have one of the photos selected
    3. Select the drive and folder that contains the referenced file and select it
    4. Click 'Reconnect All'
    This might not reconnect all of them, but the dialog box will still be open and you can reconnect the ones left.
    Narvon
    Message was edited by: Narvon

Maybe you are looking for

  • How do I incorporate text entry boxes into a quiz?

    Hi Everyone, I am very new to Captivate 8. I am trying to incorporate TEB's into a quiz. When I try to check the button (include in quiz) it is grey and does not allow me to check it. In addition I do not know how to let the programme know what text

  • Me51n - set focus

    hi everyone... i set an user exit in order to validate some fields, not in the header of the lines but in the imputation screen. the thing is that when one of the fields doesn t pass the validation i send a message but the problem is that it doesnt g

  • Can you have multiple accounts on the same ipad2?

    Can my wife and I share the same iPad using two different accounts? If so, how?

  • Regarding door invoice

    I developed sale tax register. in this report i want to add door invoice no. which is vbeln from table vbrp. i check it against the pgi no. when i entered the pgi no.  it give me two vbeln no. one is billing doc. no. and other is door invoice no. i d

  • Public folder in WAS

    Hi everyone, Where in the J2EE engine server should I put files in order to reach them via HTTP protocol (like in IIS server in the wwwroot folder) ? Thanks in advance.