Is there a way to export an image from Aperature into Adobe Raw before Photoshop?

Is there any way to export an image out of Aperature into Adobe Camera Raw before using Photoshop?

If you want to send a TIFF file via the 'Edit with External Editor' command after selecting Photoshop as your external editor, you can try the following:
1 - Open Camera Raw preferences (either via Bridge or ACR).
2 - Find the 'JPEG and TIFF Handling' section
3 - Use the 'TIFF:' drop-down menu to select 'Automatically open all supported TIFFs' option
4 - Click OK and restart Bridge or ACR
This should automatically launch ACR when Aperture sends a TIFF to PS.
Note - you would then need to use the 'Open Image' command from ACR to render to Photoshop and use the 'Save' command to go back to Aperture and see the changes. This is only for a TIFF file format though.

Similar Messages

Is there a way to export still images from Quicktime or do I need Quicktime Pro (and is Quicktime Pro even still a thing?)

I'm sure there used to be an option "export to still image" but not any more.
Do I need to switch to Quicktime Pro? I used to have it back in my P.C. days but I'm not sure if Quicktime Pro is even a thing any more.
I don't want to go down the "screen grab" option because my source footage is larger than the screen size and so I want to do my cropping after I've exported the stills, not before.

I played a little with live trace in CS5. Seems to do quite a good job if I had the right contrast between the blood (white stuff) and the myocardium (the dark circular wall surrounding the white round area). Picture one is the contrasted picture taken off a dicom medium (these media allow adjusting the contrast very well). Left ventricle is the smiley face on the right of image. The right ventricle is on the left, kind of D shaped. The second picture is the live trace image (with "make and expand" selection). I selected the image with the "direct selection tool (A)", then used the live trace with make and expand. The tracing can not be seen here, but it is very accurate.
The third image is the same MRI image as in picture one without contrast adjustment. Live trace did bad - fourth picture.

Is there a way to put a video from facebook into imovie?

Is there a way to put a video from facebook into imovie? The facebook video is on my friends wall. Draging it does not seem to work.

You won't be able to drag and drop it, I think the workaround would be to try and 're-record' it using QuickTime. There's a screen recording ability that will record your hold desktop. My suggestion is to launch QuickTime. Under File Menu > Screen Recording. Get that all setup and ready to hit the red record button. Open Facebook. Playback full screen if possible, then pause it. Start the screen recording, then play the Facebook video. By default, the video will be saved into your Home folder>Movies folder. Open iMovie, go to File Menu > Import > Movies... and then navigate your way to your Movies folder and import that clip into an iMovie Event.

Is there a way to prevent an image from turning blue when selecting it?

I'm exported a pdf from InDesign that will be used as a brochure for one of the exhibitions at our museum. I'm wondering if there's any way to prevent an image from turning blue when a reader clicks on it. Since all of the images are works of art, I'd rather that they not change color when people click on them.
I changed the security settings so the images couldn't be copies, hoping that would prevent the blue square, but it didn't help.
thanks for any suggestions.
Chris

There are several ways to do that and here are but two of them.
1. If you want to make a new image you can right click on the channel, click on Duplicate Channel and under Destination>Document, select New
2. If you want to add a new layer to your document, click on the channel in the channels panel, go to Select>All, then Edit>Copy, click on RGB in the channels panel and then Edit>Paste

Is there any way to save an image from a nested movieclip as a .png using PNGEncoder

Hello all,
I am new to AIR and AS3 and I am developing a small AIR desktop application in Flash CS5 that saves a user generated image locally to their computer.
The image is generated from a series of user choices based on .png files that are loaded dynamically into a series of nested movieclips via XML. The final image is constructed by a series of these "user choices".
Sourcing alot of code examples from here and there, I have managed to build a "working" example of the application. I am able to "draw" the parent movieclip to which all the other dynamic movieclips reside and can then encode it using PNGEncoder. The problem is that the images loaded dynamically into the nested movieclips show as blank in the final .png generated by the user.
Is there a way to "draw" and encode these nested movieclips or do I need to find another way? I can provide my clumsy code if required but would like to know if this concept is viable before moving any further.....
Thanks in advance....

Thanks for the files.......
Yeah I'm doing it in Flash but importing the images via an xml document. The problem isn't in being able to view the eyes (based on the selection of the user) its when I go to save the resulting image as a .png. When I open up the saved .png the eyes are blank even though they are visible in the swf
Even when the user clicks on the option to copy the image to the clipboard, it works as intended.
My only guess is there is an issue with the way my xml is loading (but this appears to work fine) or when the file is converted and saved.....
As I said I'm still learning but surely there must be a simple answer to this....
I have included the xml code I am using and also the save code to see if anyone spots an issue..... (I hope I copied it all)
// XML
import flash.net.URLRequest;
import flash.net.URLLoader;
var xmlRequest:URLRequest = new URLRequest("imageData.xml");
var xmlLoader:URLLoader = new URLLoader(xmlRequest);
var imgData:XML;
var imageLoader:Loader;
var imgNum:Number = 0;
var numberOfChildren:Number;
function packaged():void
rawImage = imgData.image[imgNum].imgURL;
numberOfChildren = imgData.*.length();
imageLoader = new Loader ;
imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadedImage);
imageLoader.load(new URLRequest(rawImage));
faceBG_mc.Eyes.addChild(imageLoader);
function loadedImage(event:Event):void
imageLoader.x = -186;
imageLoader.y = -94;
imageLoader.width = 373;
imageLoader.height = 186;
// Clipboard
btn_Copy.addEventListener(MouseEvent.CLICK, onCopyClick);
function onCopyClick(event:MouseEvent):void
var bd:BitmapData = renderBitmapData();
Clipboard.generalClipboard.setData(ClipboardFormats.BITMAP_FORMAT, bd);
function renderBitmapData():BitmapData
var bd:BitmapData = new BitmapData(faceBG_mc.width,faceBG_mc.height);
bd.draw(faceBG_mc);
return bd;
// Save faceBG_mc as .png
var fileRef:FileReference = new FileReference();
var myBitmapData:BitmapData = new BitmapData (faceBG_mc.width,faceBG_mc.height, true, 0);
myBitmapData.draw(faceBG_mc);
var myPNG:ByteArray = PNGEncoder.encode(myBitmapData);
function onSaveClickPNG(e:Event)
fileRef.save(myPNG, "myPNG.png");
So my problem is....
The final image is copied to the clipboard with the eyes visible - yes
The eyes appear in the image in the swf as intended - yes
When the image is saved as a .png and is meant to include the eyes, they are blank (see picture above)
I hope this helps.....
Thanks in advance

Is there a way to export multiple pages from an application?

Hi,
I need to export multiple pages from one application and import them to an other application in one shot?
Thanks

Go into Shared components > on the right hand side select Export Application Components > and export multiple pages,components at once

Batch export of images from fla in flash professional to photoshop

Hi I need to use the images of a lot of flas and put them inside photoshop to add effects to them. We have over a thousand. Is there a way of doing this?
Thanks in advance.

It may be better to ask in the http://forums.adobe.com/community/flash flash professional forum as what file formats can flash export the can be opened and processed by Photoshop. I would think a video file like mov or avi may be possible. Photoshop can do some video editing and make frame layer from video. However Photoshop has a layer limit around 8,000. I would not expect performance with 8,000 layers to be fast. 4 minuets of 30FPS video.

Is there a way to import photos stored in iPhoto into Adobe Bridge CS6?

I am having a problem opening my iPhotos in Adobe Bridge or Photoshop. Any help would be appreciated.

1. Bridge or iPhoto: take your pick. The both do the same job so using both makes no sense. Trying to use them both will add confusion and complexity that you don't need.
2. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> Advanced -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

Is there a way to export photo images and their metadata from Adobe Bridge to MS excel?

Is there a plugin, or script that allows photos and their metadata to be exported from Adobe Bridge to Microsoft excel?

I would like to see the description with the image when it is attached to an email. I would also like to be able to create a DVD of the images that would include the descriptions when the DVD is played back.
For that you will need iDVD to create a slideshow of the images and then display either the Title, Description or both as shown below and then burn to disk creating a video DVD to play on a TV set:
If you want the description on the image itself you'll need to use a 3rd party editor like one of those below or the free watermark iPhoto plugin, BorderFX.
Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
GraphicConverter - $40
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
GIMP for Mac - Free
Xee 2.1 - free

Is there any way to set an image from your camera roll as a wallpaper without having a shadow over it on iOS7?

Everytime you set a picture from Camera Roll as a wallpaper a dark shadow appears on the top and the bottom of the image.
Is there anyway one can turn this off? I've noticed this doesn't happen with the preset wallpapers the phone brings.. Thanks
Any suggestions would be appreciated!
Thanks,
Emilia

I believe the iPhone does this a default so you can view the time more clearly There is no way to turn this I think. But I have found zooming in on an image ever so slightly and moving it around can change the effect. Good luck

Is there a way to export Itunes library including playlists into folders?

Hey, i have quite a large library with over 100 playlists some playlists themselves in playlist folders
Is it possible to export all playlists (Including playlist folders) into folders and for them to keep there structure?
For example
Playlist folder
"Best playlists"
     "Playlist1"
     "Playlist 2"
     "Playlist 3"
"Other Playlists"
     "Playlist 1"
     "Playlist 2"
     Playlist 3"
So i would get a folder with "Best playlists" then 3 folders inside with "Playlist 1, 2, 3" etc.
Of course i want the music inside as well
Maybe there is a script that will do it?

Bump

Is there a way to save an image from the Internet on my MacBook Pro v10.6?

I am creating a poster on a website and want to upload some images of stars onto the poster. They can just be graphics. Can this be done?
How? Thanks!

Yes. Use Google to search for the type of stars you want to use for your poster. Download them to your desktop & follow the instructions on the poster website on how to upload to your poster.

Is there a way to export (or open) an InDesign CC layered document with Photoshop CC?

I'd like to be able to visually design websites in InDesign CC as opposed to using Photoshop. But, the end result needs to be delivered in a layered, Photoshop file.
I have read about scripts that are available but it looks like that information is fairly dated. I was wondering if this might be a new feature.
Any suggestions!

I have read about scripts that are available but it looks like that information is fairly dated
If you are using OSX this AppleScript will do it
http://www.zenodesign.com/forum/PageToPSLayersV6.zip
And this thread covers the version history
how to export indesign layers to photoshop layers (same structure)

Best Way to export synth tracks from logic into Protools LE

Hi I have recorded my song in Logic using the software instruments and I am going to mix it in protools any suggestions as to the best way to get these tracks out of logic and into protools? Just wondered what different options there are and if there are any audible differences once put into protools. thanks for any thoughts.

"Export all Tracks as Audio Files" found under File>Export.
This will render audio files of your software instruments that start at bar 1, beat 1, and can be dragged right into Pro Tools. The export happens "pre-fader", so it is bounced at unity gain, and excludes any automation.
If there is automation that needs to be included (like a filter sweep or something like that), you'll need to solo the track, and bounce it, because a bounced file does include automation.
Also, if you're using a multi-channel instrument, you'll need to bounce those tracks separately as well.

Is there any way to add a text from html into a PDF form using javascript?

I have a SCORM based package having only a PDF form to show. I want to add user name from SCORM LMS to be added on the PDF whenever user launches PDF from LMS.
Please let me know if there is any way to execute this.
Thanx.

Hi, hbirkie, and welcome to Apple Discussions. No, there isn't any way to apply text to a photo in iPhoto — you have to do that in a different application. MS Word is the last one I would ever have thought of using for that purpose, but if it works for you, great!

Is there a way to export an image from Aperature into Adobe Raw before Photoshop?

Similar Messages

Maybe you are looking for