Is there a way to force applications to use window opening (and closing) animations?

I'm not a big fan of the fact that most of the time, when windows open, they don't display any sort of animation, and pretty much nothing has a closing animation.
Is there any way to force all apps to use some sort of animations, and also, is there a way to enable window closing animations?
It just kind of bothers me, probably because of that fact that I just abandoned Windows 8 for OS X.

Hack using spell checker's smart quote feature:
If the document doesn't use double quotes...
Edit > Find/Change:
Change all ( to "
Change all ) to "
Those are straight quotes.
Edit > Spell Check:
On all instances with "string", click [Correct]
On all instances with "string, type in (string) and click [Correct].
Edit > Find/Change:
Change all \` to (
Change all \' to )
Those are left and right double curly quotes.
Yes, you have to hit each instance, but it will be click-to-continue except on mismatch.

Similar Messages

Is there a way to force essbase to use a certain disk?

We run essbase 9.3.1 most bso databases, but also some ASO.
Is there a way to force essbase to use a certain disk?
Our operating system runs on C:\. Essbase is installed on D:\ Our M:\ drive is for data purpose.
We want to direct essbase to create the *.ind and *pag files on the M:\ drive.
To do so I added "DISKVOLUMES M C 0k D 0k " to the essbase.cfg, restarted essbasse and created and loaded a new application. But is still creates the ind and pag file soin D:\ With configure application I am able to move the files before a databases is loaded.
Is there a way to force essbase to use a certain disk?

ok ok ok (not ok)
all the answers seems to say that it is NOT posible to force it from start.
You can only correct it afterwards.
We want the essbase admins NOT be able to create a application on a certain path.
All the given answers tell me: let them do it and change it later on.
To bad.
But anyhow thanks for all the replies.

Is there a way to 'Force all Links to be opened in New Tabs ' like Maxthon browser?

Is there a way to get Firefox to 'Force all Links to be opened in New Tabs, like Maxthon browser does ? I really like this Maxthon feature but hate Maxthon as it has always has and continues to lock up all the time (what a pain!!)
Hoping Firefox can do this. By the way I know if you right click a link and ask for it to open in a new tab it will. I want it to be automatic.
Thank you

Question already asked and answered.
I gave an AppleScript and an other helper described a scheme relying upon standard features.
Yvan KOENIG (VALLAURIS, France) jeudi 21 juillet 2011 23:08:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Is there a way to force kmix to use pulseaudio? [SOLVED]

I am using pulseaudio and the phonon-vlc backend, most of the time Kmix will use pulseaudio, but on some occasions I will reboot and kmix will be using alsa (it will show up as Master instead of Internal Audio Analog Stereo) and I have to kill kmix and restart kmix in order for Kmix to control pulseaudio again.
I was wondering if maybe there is something I can put into kmixs config file to always force pulseaudio in kmix
Last edited by trc (2012-01-21 10:31:25)

Otamay wrote:
I've had the same problem for almost one year. The problem is that kmix starts before pulseaudio does, so kmix only have access to primary volume control.
KDE4 startup applications are stored in /usr/share/autostart, /etc/xdg/autostart and ~/.kde4/Autostart. The first directory contains the system programs that must be loaded, and the second and third directories contains user applications. KMix, when installed, stores kmix_autostart.desktop and restore_kmix_volumes.desktop in /usr/share/autostart, and pulseaudio stores pulseaudio-kde.desktop under /etc/xdg/autostart directory.
Moving /usr/share/autostart/kmix_autostart.desktop and /usr/share/autostart/restore_kmix_volumes.desktop to /etc/xdg/autostart seems to solve the problem, allowing to pulseaudio start before kmix.
A delay of almost 9 months jajaja. That was a very frustrating problem.
Ufff thank you, finally I solved my issue.
I had done what u say but it didn't work. So, I moved too /etc/xdg/autostart/pulseaudio* to /usr/share/autostart/ and I got it.
The files I moved are pulseaudio-kde.desktop and pulseaudio.desktop.
Thank you !!!

Is there a way to create an object using Trapcode Form and then use that object as a particle in Trapcode Particular?

I made some objects in Cinema 4D and I tried to import them into After Effects CC 2014. I get an error saying 'Cannot find Adobe Premiere Pro Dynamic Link'. So I tried it in AE CC and that worked. However, I want to create a form object and then use that as a particle for Trapcode Particular. Is this even possible?
Thank you for any help!

There are also size limitations or rather suggestions for particle size. If I were creating an animated 3D shape using Form or C4D and wanted to use it as a particle I would keep the size of the particle about 1/6 to 1/8 of the comp size. You would create a new comp for your particle, animate it, then nest the particle comp in your main comp, turn off visibility, and then use it as a particle in Particular.

Is there a check list ti send emails rather than opening and closing contacts for each entry?

Maybe I got spoiled but in my hotmail if I wanted to forward an email all my contacts came up and I would just choose and check them off my contact list. Now I have to do one atbabtime on my iPad and mobile hotmail. I know I can make groups but seems like I lost a great feature.

CS7981 wrote:
is "Is there any benefit to using my Airport Express with my wireless router
no.

Is there a way to force the charset to utf-8 with the IIS plug-in?

We're using AJAX. The initial request for the HTML has charset=utf-8 set on the HTTP header as seen in this Live HTTP Headers capture:
http://plper.mysite.com/mysupport/index.jsf
GET /mysupport/index.jsf HTTP/1.1
Host: plper.mysite.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=FN3WLTNJFJCfYhHHVrwKvLHF2gGdnnTb11DrCyZqR9YbGhcG28lK!-1728721171; mysession=AAAAAgABAFBy5LRMDmjSRCN%2FByvfquVwFeKCpmES4x9lReRava35fxKfwcbJimb3YyPhEd0vBq7ZxgJVecL475TFZwQuSphLOwRWAQw2t7PEW%2BrxsfxgnQ%3D%3D
HTTP/1.x 200 OK
Date: Tue, 10 Jun 2008 18:53:01 GMT
Server: Microsoft-IIS/6.0
Cache-Control: no-store,no-cache,must-revalidate, no-cache="set-cookie"
Pragma: No-cache
Transfer-Encoding: chunked
Content-Type: text/html;charset=UTF-8
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Set-Cookie: JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; path=/
Content-Language: en-US
X-Powered-By: Servlet/2.5 JSP/2.1
Subsequent requests do not:
http://plper.mysite.com/mysupport/index.jsf
POST /mysupport/index.jsf HTTP/1.1
Host: plper.mysite.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
Accept: application/x-backbase+xml,application/xhtml+xml,application/xml,text/xml,application/x-www-form-urlencoded,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Content-Type: application/x-www-form-urlencoded
Referer: http://plper.mysite.com/mysupport/index.jsf
Content-Length: 122
Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; mysession=AAAAAgABAFBRtE5lAyr85YM0aIap%2Bekf1Qu8FoA6BNh4JVl1JgvDNDQgYrQm5m9W%2FQa4HLK767CtXV5c%2FhtXchbug9%2BE1zoCmqSBqqYmqXE9VG1lXi%2F%2Brg%3D%3D
Pragma: no-cache
Cache-Control: no-cache
BackbaseClientDelta=%5Bevt%3DsrQuery%3AsiteList%7Cevent%7Csubmit%5D%5Bvalue%3DsrQuery%3AsiteList%7Cmultivalue%7C3971957%5D
HTTP/1.x 200 OK
Date: Tue, 10 Jun 2008 18:58:17 GMT
Server: Microsoft-IIS/6.0
Content-Length: 1720
Content-Type: text/xml
X-Powered-By: Servlet/2.5 JSP/2.1
Is there a way to force requests going through the proxy plug-in to get a charset=utf-8 set in the HTTP header for all requests?
Thanks!
Edited by f2racer at 06/10/2008 12:01 PM

If for some reason you have failed to maintain a backup copy of your computer ( not good), then transfer purchases form your ipod.
Without syncing, click File>Transfer Purchases

Is there a way to force a new session so my "on new session" code will run?

I'm using apex.oracle.com and I find values of application (global) and page items persisting across logins.
I didn't expect that? I thought they would go away when I logged out of APEX. But I can change the values, logout, and log back in to the same values. And when I login and start an application, it's not running my "shared components > application processes" initialization code which is set "on new session".
I thought each login would be a distinct new session with it's distinct set of items. (see definition below)
So when I run an application, is there a way to force a new session so my "on new session" code will run?
>
What Is a Session?
A session is a logical construct that establishes persistence (or stateful behavior) across page views. Each session is assigned a unique identifier. The Application Express engine uses this identifier (or session ID) to store and retrieve an application's working set of data (or session state) before and after each page view.
Because sessions are entirely independent of one another, any number of sessions can exist in the database at the same time. Also, because sessions persist in the database until purged by an administrator, a user can return to an old session and continue running an application long after first launching it. A user can also run multiple instances of an application simultaneously in different browser sessions.
Sessions are logically and physically distinct from Oracle database sessions used to service page requests. A user runs an application in a single Oracle Application Express session from log in to log out with a typical duration measured in minutes or hours. Each page requested during that session results in the Application Express engine creating or reusing an Oracle database session to access database resources. Often these database sessions last just a fraction of a second.
>
Thanks -- Howard

I cleaned up the copy of the Select List code in APEX 4.1.xxx which was not operating correctly before. Now it matches what I have in APEX 4.2.yyyy. And, drum roll please, the select list seemingly works fine there (4.1) as well. But now, the initialization code--which was working fine(!)--FAILS in 4.1!
•
Okay. Maybe this will help. 1) I logged in. Ran the login page but did not login. Opened the "session" window and wrote down the session ID. Logged out and back in. 2) Ran the login page but did not login. Opened the "session" window and .... it has the same session ID? 3) So the session is persisting across logins!! How is that possible?
(More) When I log into 3 different applications, I get a different session ID for each but repeated logins always give the same session ID for any given session.

Is there a way to force the Tag Engine to dump its input buffer to the database?

I have an application where I start a process and log the data, and then call a subVI that uses the Read Historical Trend VIs to get all of the data from when the process started until now. The problem is that the Historical Trend VIs only read from the database on disk, and the Tag Engine's buffer doesn't write to disk until it's full (or possibly times out; I'm not sure about that, though). Is there a way to force the Tag Engine to write to disk, so that the Historical Trend VIs will return the most recent data?
Shrinking the buffer will help a little, but that will only result in missing less of the most recent data. One possible hack is to have a dummy tag that I simply write enou
gh data to that will cause the buffer to be written to the database. I was hoping for something more elegant, though.

That's a good question.
The control about the datalogging and the DSC Engine is all done (more or less) automatically - you feel the NI ease-of-use idea
That means the Citadel service (one of the NI Services installed by LabVIEW DSC) is responsible of taking care about the datahandling (writing to and reading from the database files including caching some data e.g. index files, frequently used data...).
The DSC Engine makes a request to the Citadel service that this data has to be logged. Everything else is handled by the Citadel service. Internally, there are two kinds of logging periods handled through the Citadel service. One for traces being viewed (a small period: 200ms) and one for traces not being viewed (slow (big) log period: 20000ms). That
means, if Citadel gets a request to store a value it will buffer it and store it as soon as possible depending on other circumstances. One depends on the fact if this trace data is being viewed (e.g. with Read Histroical Trend.vi) If you request/read to view a trace you should pretty much see the current values because citadel should use the fast log period.
The Citadel service takes care as well about setting priorities e.g. the writes before the reads (We don't want to loose data - right?). That means if you really stuff the system by writing a lot of data the CPU might get overloaded and the reads will happen less often.
If you really want to see "real-time" data I would recommend to use the "Trend Tags.vi". With this approach you avoid the chain DSCEngine-Output Buffer-CitadelService-InputBuffer-File-HD... and back.
I hope this info helps.
Roland
PS: I've attached a simple VI that has a tip (workaround) in it which might do what you are looking for... However, Nationa
l Instruments cannot support this offically because the VI being used are internally DSC VIs that certainly change in the next version of LV DSC... and therefore you would need to "re-factor" your application.
Attachments:
BenchReadHistTrend.llb ‏104 KB

Is there a way to force a download option?

Hello
My boss asked me this question: is there a way to force a
link (PDF in this case) to open the dialog box for an option of
save to file or open?
Thanks
Rob

> My boss is asking for it... no other reason
If you are willing, you could educate your boss a bit and
explain that PDFs
are a 3rd party file format...not a native web format. As
such, they are
interacted with outside of the default settings of common web
browsers. This
means that the default behavior of a link to a PDF is going
to be different
on everyone's own machine and based on things like user
preferences,
installed plug-ins, installed browser extensions and
installed 3rd-party PDF
viewing applications.
Any link can be downloaded via right-clicking a link in any
browser (well,
except maybe the iPhone...can you 'right click' on the
iPhone?)
Using a ZIP file can fix the 'force a download' request, but
usually those
types of requests that come from people that don't really
know how to use a
computer, so you're gambling that they'll know what to do
with a ZIP file.
-Darrel

Is there a way to force a View Object to query the database always?

Dear All,
Is there a way to force a view object to always scan the database table to read the latest data?
Here's my use case.
I have a page that loads data then I have a button which executes the following code.
viewObject.setApplyViewCriteriaName("SampleCriteria");
viewObject.setNamedWhereClauseParam("arg1", "test");
viewObject.executeQuery();
RowSetIterator it = viewObject.createRowSetIterator(null);
while(it.hasNext()) {
/* More Code */
}Suppose after page load, I edited some row in the table and then I clicked the button. I notice that my edited row
was not reflected in the query.
I am not sure but is there some configuration to check so that when the viewobject executes it will always query the data
from the table?
I am thinking that there is some level of caching and I want to disable it. If I restart my application, I notice that it is able to read the latest data.
JDEV 11.1.1.5

By default a view object performs its query against the database to retrieve the rows in its resulting row set. However, you can also use view objects to perform in-memory searches and sorting to avoid unnecessary trips to the database.
The view object's query mode controls the source used to retrieve rows to populate its row set. For more details please refer: http://docs.oracle.com/cd/B31017_01/web.1013/b25947/bcadvvo005.htm
Also, see if this helps: setQueryMode for secondary rowSet not working

Is there a way to force A Mini to recognize the HDMI as a sound output.

Is there a way to force the Mac mini to recognize the HDMI as a sound output? I have the HDMI going through a matrix switch and the video works fine but the audio is not recognized. My Apple TV has no problem with both audio and video through the same set up to a tv.

Some general checking:
Open System Information found in Applications->Utilities.
On the left side under hardware, click Audio. In the right
pane, Expand items if necessary to reveal the contents and
see if there is an HDMI listing. If so, click on it to get additional
info.
Also, have you connected the Mini directly to the TV? Narrows down
if it is actually the Mini or just how the Mini is working with the
switch.
Another possibility is that there is a power up sequencing issue.
Ran into a situation with my Yamaha receiver, Mini, and Samsung TV
that if things were not powered in the right sequence I could only
get two channel audio and sometimes only internal audio. With my
setup, I needed to power up the TV (waiting for it to come up completely
showing the searching for signal box), power up the Yamaha, then finally
power up the Mini. Also, after all this, if anything was switched, I would
end up having to reboot the Mini to get audio the way it should be.

Is there any way to force the applet to load the file without using cache?

Hi,
I have the applet that renders some data from a file specified as the parameter. The problem is that the user can do something, that changes the input file and reloads the page, but the applet renders old data (from browser cache most probably)
Is there any way to force the applet to load the file without using cache?
Regards,
Zdenek

The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

Is there a way to force "desktop view" on my iPad 1 when using Safari?

Google, in their control frenzy, has now changed iGoogle to default to Tablet view on iPads. Why??? Here is one solution but it does not use Safari:
Question:
Is there a secret to getting the old igoogle homepage back, or is it gone for good on the iPad 2? I still have the homepage on my Mac, so the problem is just with the iPad. Any help anybody can give to get the home page back would be greatly appreciated.
Answer:This issue is with the Tablet view. You can switch to Classic view at the bottom, but as soon as you type anything in the url bar you get reverted to Tablet. I have the Atomic Browser installed on my iPad and have set it to identify itself as a desktop. iGoogle loads fine on that. I am not aware of any such setting for Safari on the iPad.
Google fails to understand that we do not need sub featured pages for our tablets. Tablets work fine with the desktop versions. They have probably concluded that iGoogle pages are too busy for tablets and so have disabled it. Tablet search has been significantly degraded by Goggle with elimination of the pinch and zoom and cached features. It should be possible to make a sticky setting change to Classic view on tablets. Most other settings stick, but not the Classic view. I dont think Google get it anymore.
Is there a way to force Safari ,on an iPad, to do this?

The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created? I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS). I was wondering if there is any way to create an installer? I think there probably isn't... If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
Thanks so much for your time.

I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is there a way to force applications to use window opening (and closing) animations?

Similar Messages

Maybe you are looking for