Is there a way to get iCal to put the time of each event on Monthly view without going in and editing each event?

When I enter a new event on iCal with the time, it leaves the time off of the Monthly view and in order for me to glance at the times of the day's events I have to click on each event or go into the event and edit it again putting the time on, for it to show.  Is there a way to get it to show without doing this?

Sorry.  Only after posting did I see that this question has been asked already and the answer given.  Please ignore this post.

Similar Messages

  • Is there any way to get Mail to put the time on yesterday's mail instead of just putting "Yesterday"

    In "classic" mode, it will show Yesterday and the time if you drag the column wide enough.  But in the default mode, it only shows "Yesterday"  I need the time!!

    Full screen 3 column view shows time stamp.
    You can customize the Mail  tool bar for the "show all Header icon" of the individual mail. (right click in toolbar area to customize.)
    Here the time & date stamp is visible in opened mail.
    Of course if you wait a day, it will show.
    You can also make some changes Mail>preferences>viewing> Show Header Detail

  • Is there any way to get my reminders (from the new iPhone app) to sync with something on my laptop (Mail, iCal, some other desktop app)?

    Is there any way to get my reminders (from the new iPhone app) to sync with something on my laptop (Mail, iCal, some other desktop app)?

    Yes, if you have iCloud set up on your phone and computer, then reminders will be synced through iCal.

  • Is there a way to get a log of the bluetooth devices my iphone has been connected to?   My Bluetooth car speaker phone was recently stolen from my car and appears to be on Craigslist.

    Is there any way to get a log of the bluetooth devices my Iphone has been connected to?  I recenly had my Bluetooth Jabra stolen from my car and now a simliar one is on Craigslist.  I'd like to give my connection log to the police before I go and see if my Iphone recognizes the device in question.  Any way to get any type of bluetooth device connection log out of my iphone?

    Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
    The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
    "Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
    http://support.apple.com/kb/HT1414

  • Is there a way to get a version of the Garage Band app that runs on version 5.1.1?  I have an iPad 1 and can't get any higher iOS.  The App store is telling me that Garage Band only runs on iOS 7.

    Is there a way to get a version of the Garage Band app that runs on version 5.1.1?  I have an iPad 1 and can't get any higher iOS.  The App store is telling me that Garage Band only runs on iOS 7.

    Unfortunately the answer is still no.

  • Is there a way to get my ipod past the logo screen ?

    is there a way to get my ipod past the logo screen ?

    - Have you tried resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Next connect the iPod to its syncing computer, if iTunes sees the iPod restore the iPod via iTunes.
    - If iTunes does not see the iPod see if placing the iPod in recovery mode will allow iTunes to see the iPod so your can restore the iPod.  For recovey mode see:
    iPhone and iPod touch: Unable to update or restore

  • Is there a way to get CF to overide the original file?

    When I upload a file to cf, cf will rename the file if the
    file already exists. Is there a way to get CF to overide the
    original file?

    Yup there sure is.
    The documentation even tells you all about it.
    http://livedocs.adobe.com/coldfusion/8/htmldocs/Tags_f_10.html
    I'll even point out that the 'nameConflict' attribute is the
    one you
    will want to read.

  • I have an iPod whose contents I want to transfer to a newer Ipod.  At some stage I lost the music files from my library.  Is there any way to get them back from the older iPod and put them onto the newer one again?  I stupidly synced the wrong one.

    I have an iPod whose contents I want to transfer to a newer Ipod.  At some stage when I thought I was syncing correctly I wasn't so I lost the music files from my library.  Is there any way to get them back from the older iPod and put them onto the newer one again? 

    Have you not got a backup of your content on, for example, external drives ? If not then you could have a look to see if any of the utilities mentioned in this old post still exist and work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893

  • I upgraded to Ios5 and have lost my contacts and other app profiles - is there any way to get them back from the backup taken before the IOS5 process started?

    I upgraded to IOS5 and have lost my contacts and other app profiles - is there any way to get them back from the backup taken before the IOS5 process started?

    Thanks but have tried that - When I try to restore I get a -50 error and into a loop of taking another back up.  I took a copy of the back up before the IOS upgrade and have it stored on my desk top but I cannot get Itunes to restore to that back up
    Any ideas how I can do this?

  • Is there a way to get lightroom to search the computer for catalogs like aperture does?

    Is there a way to get lightroom to search the computer for catalogs like aperture does? I've switched over from Aperture to Lightroom, and i liked how in Aperture when i went to open "other library" it would basically scan all connected drives for them, and show me when last opened and what version. Is there a way to do this with Lightroom, either in program or by a third party app?

    The user interface is on a level of elementary PC software
    something I have deteced till now
    no free moving workspace windows
    no search function for the whole catalog
    no support of mpg files in the archive
    no chromatic appararture correction
    second screen sometimes gets lost, when moving between screens
    no automatic creation of collection ( very risky direct interfacing with the original file system )
    wrong counting of objects in catalog folder when creating virtuel copies
    What worked good is the import of the APERTURE Archive ( 40000 objects ) took me one night and its there with the above obsticles!!! I am using just three days and I have to say
    not user friendly
    not workflow supporting
    risky user interfacing with masters
    As JimHess stated, there is no risk working with the masters.
    Chromatic aberation correction is available in Lightroom, searching the entire catalog is available in Lightroom.
    With regards to your other comments, the idea that Lightroom should work the same (or very similar) to Aperture is one that you should remove from your thoughts. It will only get you into trouble. Lightroom is not Aperture and will not work the same, and has different underlying principles, and so its pointless to think you will be able to do everything the same way you did it in Aperture. You need to be open to Lightroom's features, and Lightroom's way of doing things. I agree with JimHess that it takes most people a while to learn Lightroom's way of doing things, but your patience will be rewarded.

  • I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

    I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

    Technical issues aside, there's still a legal issue.
    Neither 2006 nor 2007 MacBooks shipped with Snow Leopard 'factory' installed. OS X 10.6 Snow Leopard became available in September 2009. So you purchased and installed a Snow Leopard upgrade disc on the 2007 system at some point.
    If your Snow Leopard upgrade was a single-user copy, then legally, you need to purchase another one for the second computer. If your Snow Leopard upgrade was a Family Pack 5-user license, then you're good to go.
    http://store.apple.com/us/question/answers/product/MC574Z/A?pqid=QTUXD7AF4YU9FJD YUTDPCKYKUDDDXKHTK
    If you have an active MobileMe account, Apple was giving away a single-user upgrade copy of Snow Leopard for a limited time, and you should have received an email with a link, or been offered the opportunity when you signed in to your MobileMe account on the web:
    http://www.macrumors.com/2012/04/24/free-snow-leopard-discs-for-mobileme-users-n ow-arriving/
    Worst case, single-user Snow Leopard upgrade discs are $29 retail, direct from Apple. I'd hate to have two computers and no OS installation CD's for whatever version I'm currently using.

  • Is there a way to backup a PC with the Time Capsule?

    Is there a way to backup a PC with the Time Capsule?

    Yes, but unfortunately not with Time Machine. You could; however, use any PC backup product that supports network drives as a destination for their backups. One such product is Genie9's Genie Backup Manager Home.
    Genie9 offers a similar option for Time Machine for PCs, called Genie Timeline Home. It is advertised to support backups to "NAS and network storages," but several folks who have this reported that it wasn't able to backup to a Time Capsule. If you decide to give either Genie9 product a try, please be sure to give their trial versions a go to make it works for your situation.

  • HT2513 is there a way to get more than just the 3 colors (green, orange, purple)

    Is there a way to add different colors besides the green, orange, and purple if you have more than 3 things going on in a particular day??
    Thanks

    The color of an event is dictated by the color of the calendar that it's asigned to.
    Click the Calendar button, right click on one of your calendars and choose Get Info.
    There you'll find a color drop down menu.  If you don't like any of the default color click, click Other and you'll get access to an infinte number of choices.
    Matt

  • HT203077 Is there any way to get other voices for the voice over?  Alex is dull.

    Is there any way to get other American English voices for the voice over--besides Alex?

    Settings > General > Siri > Voice Gender

  • Is there any way to get Mail to use the Inbox as the Sent folder?

    This may sound like a silly question, but I have an IMAP account with over a hundred nested folders. I've tried using rules to sort email that comes in, but honestly? It's more trouble than it's worth. Generally, I leave emails in my Inbox until I've dealt with them, and then I sort them into the appropriate folder.
    Unfortunately, this means that I've then got to go and do the same thing with the message that I've just sent—which I sometimes (often) forget to do. I then end up with hundreds and hundreds of messages in the Sent folder that need to be hooked up with their respective originals. Bleh.
    Does anyone know if there's a way to get both the original message and the response to end up in the same folder automatically? Mail doesn't allow you to use the Inbox as anything but the Inbox—it's the root directory for the mailbox.
    Anyone?
    BTW, I'm posting this here because I have Tiger at work, where this is more of a problem, though I've got Leopard (and soon Snow Leopard) at home.

    Go easy—I've been using Macs since 1984 and have only used Microsoft's bloatware when work obliges me to. (I talked the boss who insisted that we run all of our email and calendars from an Access server into running OS X Server; Entourage went away, and life is much better. Word is still part of my everyday grind because of change tracking, but I have hopes for Pages.) I've used any number of email clients over the years, and Mail is my app of choice for many reasons.
    Nonetheless, a useful feature is a useful feature, even if it comes from Redmond. It's not 1996 any more—Macs aren't the downtrodden Rebel Alliance and Microsoft isn't the Empire.
    It seems to me that—especially with an IMAP account—you're not dealing with something intrinsic in the structure of the emailing system, since the folder structure doesn't even reside on the client computer (except as a mirror).
    I suppose that I could use a rule to shunt all email for that account into a single folder and then use that same folder as the Sent folder. I'd need to create the same rule on my various Macs (and punt on my iPhone)... but I suppose that would work. But I'm still not sure why a more elegant solution isn't possible.

Maybe you are looking for

  • How to do debugging for sending inbound or outbound email via ERMS?

    Hi Colleagues, I send an email to '[email protected]' with email titile 'CIM: 318238 2013', and want to display inbound email in email assignment block within CIM Service Request 10001503 in ICX. But it fails to be displayed on Web UI. And there is n

  • What are the steps would liket take using AR,AP,GL Datasource in R/3

    Hi, When i would like to use SAP content data source Like ,AR,AP,GL data source what are all the master data need to activate for this. Ex: for AR we need to activate the Customer master data what abt AP,GL what are the master data need to be activat

  • Bluetooth USB dongle vs internal Bluetooth

    Hi, When I bought my MP, I didn't ordered with an internal Bluetooth module. Now I need BT connectivity, but I read the module is a bit hard to install (if you do it yourself). I just found online a D-Link USB 2 bluetooth adapter (D-Link DBT-120). Do

  • Is it possible to set text and rotatation in stored table formats?

    I have a table that is a good candidate to be a table format because it will be resued many times.  The heading text will not change and some of the text is rotated, so I'd like to store that too.  Is there a way to do this in FM9?  Here's a sample o

  • I own Photoshop elements 10. Can't find to download

    Hi, I already own Photoshop Elements 10, but I have just upgraded my computer to a laptop without a disk drive. This means I can't use the disks to install the software on my new computer and need to download it. However, despite following the instru