Is there a way to keep an object stationary from slide to slide

I am using the Push transition from slide to slide, but I want an object to remain stationary from one slide to another. I basically want this object to sit in a layer above the slide and not move with the slide transition. Is this possible?
Thanks

You can't do that with KN, the main reason being that the "layer" your object would be on is in fact not a layer but a slide; everything which appears in KN has to be on a slide. It can't not be on a slide, because then where would it be?
But you might be able to achieve a similar effect. Make a duplicate of your "stationary object" on the following slide, in the same position, and make your transition a Magic Move. Then, have everything else on your first slide move off to the right, for instance, looking as if you had done a Push transition. Have that stuff move onto the next slide from the left. Play with the timing until it looks right. This may or may not approximate your desired effect, depending on the other content of the slide.

Similar Messages

  • My daughter has an iPod touch using my apple ID, I just purchased an iPhone with the same ID. Is there a way to keep my stuff seperate from her ipod but still share the iTunes account?

    My daughter has an iPod touch using my apple ID, I just purchased an iPhone with the same ID. Is there a way to keep my stuff seperate from her ipod but still share the iTunes account? I was looking through the photo section on my iPhone and found pics my daughter has taken from her iPod. I do not want my pics, emails, etc to show up on her iPod. Is there a way to stop this from happening or do I have to create a different Apple ID for her to use instead?

    If you have iOS 8 on all devices then:
    If under 13 years create a new ID for her by:
    Family Sharing and Apple IDs for kids - Apple Support
    The use family sharing to share apps
    http://www.apple.com/ios/ios8/family-sharing/
    Family purchases and payments - Apple Support
    If underage and not i)S on all devices then you have to create an ID for here under your name and supervise it use:
    Create a NEW account using these instructions so yo do not have to use a credit card.
    Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
      Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    More details of how:
    http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/
    Use the new ID on her iPod but only for:
    Settings>Messages>Send and Receive
    Settings>FaceTime
    Settings>GameCenter
    and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.   
    Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

  • Is there a way to keep the search bar from unfolding downward?

    I just updated to FF 34 and see that when I start to type something into the search bar it now unfolds downward, taking up about seven lines worth of space -- even though I have search suggestions disabled. The problem with this is that the unfolding covers up part of the urls, tab and top-of-webpage text that I sometimes reference (or even copy-n-paste) to guide my search-term selection. I usually use only my default search engine, so the disadvantages of this "obscuring" definitely outweigh any advantages from being able to more easily select an alternate search engine on-the-fly. In fact, one reason I used the search bar to begin with is to *avoid* the kind of unfolding behavior search engine pages often have. But it's actually more intrusive here, because it is covering up more pertinent text. Is there any way to keep this "unfolding" behavior from happening automatically when using the search bar in FF 34? Thanks

    You can revert to the older Search Bar scheme like this.
    Open up '''about:config''' ''(typed in the Location Bar)''
    Right-click and toggle this preference to '''''false'''''
    '''browser.search.showOneOffButtons'''
    Then restart Firefox.

  • When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

    When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • How do I move pictures off my phone without losing the pictures permanently?  Is there a way to keep the pictures in the cloud without them being on my device?

    How do I move pictures off my phone without losing the pictures permanently?  Is there a way to keep the pictures in the cloud without them being on my actual phone?  I'm concerned that the sync feature will remove the pictures from the cloud when they are deleted from my phone.
    Thanks for the help.

    Can I back up iPhoto to the cloud via some apple service (iCloud)
    No
    or do I need to use something else?  If so, any recommendations?
    An external hard disk:
    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • Is there a way to keep my Mac Pro On the network without sleeping???

    i'll try to explain this the best way I can. I often wish to access my Mac Pro over the network either for file sharing, or for use with Apple Remote Desktop. The problem is after about 20-30 minutes, the Mac Pro sleeps and disappears from the network. Is there a way to keep it on the network without turnig off sleep mode? I really don't want the hard drives working 24/7 if possible....
    Thanks in advance!
    JPT
    P.S. I'm sure it doesn't matter, but just in case..I'm using the new Apple Airport Extreme base station.

    In the Energy Saver pane of System Preferences, check the 'Wake for Ethernet network administrator access' checkbox under the Options tab, and then use an application such as this one to send it the signal.
    (19902)

  • My husband and I both have iPads and somehow when they were setup the both we're setup using the same email I'd address. When I go to delete and rename one iPad it says all info and pictures will be erased from my iPad. Is there a way to keep the info iPa

    My husband and I both have iPads and somehow when they were setup the both we're setup using the same email I'd address. When I go to delete and rename one iPad it says all info and pictures will be erased from my iPad. Is there a way to keep the info IPad when doing this?

    You can go to Settings/iCloud and delete the account, then create a new iCloud account.  You can still use the same account for the app store though.

  • My children got Itunes cards for christmas.  There devices are all on my imac.  Do they each need a separate account or is there a way to keep them all separate under one account.

    My children got Itunes cards for christmas.  There devices are all on my imac.  Do they each need a separate account or is there a way to keep them all separate under one account.

    I need an answer to this too.

  • Hello, 2 questionss here is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

    Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

    Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

  • Is there a way to keep unread email at the top of the list?

    Is there a way to keep unread email at the top of the list?  I do not delet email after it's read so I end up with many 'read' email between the un-read email.  Is there a way to cluster the un-read email at the top of the list?
    Thank you,
    Patrick

    Just make a smart mailbox (unread mail) and leave it in the sidebar.

  • For a trade show exhibit, I'm putting a KN presentation on several iPads for the booth. Is there a way to keep the presentation in "Play" mode?  Thanks!

    For a trade show exhibit, I'm putting a KN presentation on several iPads for the booth. Is there a way to keep the presentation in "Play" mode?  Thanks!

    better to ask this in the discussion that deals with Keynore on iPads; here:
    Keynote for iOS

  • Just downloaded the new OS for IPhone. Despise the appearance. It has jacked with the way I like things in some unacceptable ways. Is there any way to keep the OS, but return to the old appearance? Important to know BEFORE I download OS for computer.

    Just downloaded the new OS for IPhone. Despise the appearance. It has jacked with the way I like things in some unacceptable ways. Is there any way to keep the OS, but return to the old appearance? Important to know BEFORE I download OS for computer.

    I know I am responding to my own thread, but I an SOOOO disgusted with Apple right now.
    The new iOS 7 was the lead story on CNN today... and it wasn't positive. Easy to see why, it's a graphics disaster. It is ugly, difficult to read, doesn't interface aesthetically with the iPhone 4S, and gives everyone in America vertigo. Either fix the appearance, or find some way to allow us to roll back to our previous iOS. Do so quickly, or this life-long Apple customer [circa 1978] will be moving on. If this represents shades of what is coming with OS Maverick, I am petrified. Further, I am a GM of a chain of newspapers and websites in the Austin, Texas area. I will be ripping out a scathing editorial. The notion that we can't roll back from something millions of us hate is despicable. I'm giving you one week. Be sure I am not alone.

  • Is there any way to keep the flash from going off when you receive a text or other notification?

    I have an iphone 4s.  Is there any way to keep the flash from going off when you receive a text or other notification?  I keep it next to my bed at night and keep thinking there is lightning when something comes thru.  LOL

    Go to Settings>General>Accessibility and turn LED Flas for Alerts to Off.

  • Is there any way to disable the objects owned by a user?

    Hai every body....My problem is..
    I had created 60 users granting them connect and resource privileges in oracle(8.1.5.0.0).All of the users are working under their logins(users)...Every thing is going fine...But now i wanted to disable the objects owned by those users
    (60 Users) for a period of 2 days,After that i wanted to enable them....Is there any way to disable the objects owned by them with out dropping the users?(The users should be able to work as prevoiusly on the new objects they will create after i disabled the objetcts owned by them previously)?

    hi
    if my understanding is right you want to disable the users for 2 days for any reason let say he is on holiday for 2 days then why dont u lock this user and submit the job for unlock after two days.
    Khurram Siddiqui
    [email protected]

  • I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs.  I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?

    I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs.  I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?

    That would depend on whether your model actually has a hard drive. If you have the new 2013 Retina model, then you have a fixed storage device built-in that cannot be modified after purchase.

Maybe you are looking for

  • PO Migration - GR Open ,  IR Done

    Dear All, We are currently in PO data migration. I have this case where our users didnt clean the PO and we cannot do any transactions anymore from the source system. When i migrate the PO, line items with Open GR and IR done were migrated.  IR done

  • Urgent advice needed for Camera

    Hello all, I would like to buy for cheap from my uni the Panasonic NV-GS75. The documentation only mentions USB 2, but in the manual it lists IEEE 1394, 4pin as Digital Interface: input/output terminal. Does this mean that the camera will work with F

  • Need help black screen

    I cracked my screen on  n got it fix first time I got a used screen then they guy replace it with a new one now I had líl color línes going down my screen on it home screen n pics only a couple apps too now my screen black wat should i do

  • Can a Button call a java script and then proceed with the creation

    Hi all, I have a simple APEX form on a table, with simple function as create and apply changes, some items of the form are computed by a "Computation" I need the create button to show the computed values, before move to the next page, then proceed wi

  • Encoding and decoding of tables data

    Hi, I need to encode the values in the fields of the data base table and again i need to put the encoded data into that data base table back and i need to decode the data base table back. Are there any fm's for this? Please suggest me a approch of do