Is there a way to link to a particular slide in a linked movie?

We had to break up a large project into smaller projects to reduce the load time.  Is there a way to link to a particular slide in a linked project rather than to the beginning of the project?

The simple answer is no.
The way I get around this is to make the slide I want to link to the first slide of a project (or the first slide of one of the chunks that are linked together)
It means I have lots of small projects, but linking the .swf files together provides a seamless transition.
If I'm wrong I'd love to know how to link to a slide that is not the first one of a project.
Cheers,
Kerry

Similar Messages

  • If I get a user to enter their name as a variable and I am linking one movie to another using a button, is there a way to carry the user name forward into the second movie?

    If I get a user to enter their name as a variable and I am linking one movie to another using a button, is there a way to carry the user name forward into the second movie?

    Hi there
    See if the link below helps
    Click here
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Reading the older questions, is there a way in which the full screen slide shows can be saved and/or exported?

    Reading the older questions, is there a way in which a full screen slide show (such as places or geotagged photo's) can be saved and/or exported for viewing by another party?

    Yes. Just export the slideshow and select your preferred output size.
    Regards
    TD

  • Is there a way to replace a Power Point slide in Captivate and keep the CC notes?

    Hello,
    I have a lot of Power Point slides in my Captivate project. The Power Point presentation is on a Share Point, so it is impractical to "link" the Captivate project with the Power Point presentation.  Now and then we need to make changes to the Power Point slides and then replace the old slide in Captivate with the new slide.  We have a lot of CC notes and TTS attached to each slide, so I lose all of that when I replace the slide.  Is there a way to keep the synchronized CC and TTS notes in place, and just replace the acutal slide?
    Thank you!
    Ryan

    1 - simplest way:
    drag the sound file on to the audio well in the Inspector > document > document tab
    music can only start on the first slide and will play untill the music ends, you can only have one music file in the presentation
    2 - more control
    drag the sound file on to any slide, add the  images on to the same slide and use Builds to reveal each image in turn

  • Drop down list created by fireworks MX disappears behind Flash movie.  Is there a way to have the menu list display front of Flash movie?

    Drop down list created by fireworks MX disappears behind Flash movie.  Is there a way to have the menu list displays in front of Flash movie, pls. let me know what I should do to have the drop down menue not disappear behind the Flash movie.
    Thanks,
    [email address removed by host]

    Wrong forum... this is to discuss the operation of the forums, not products
    You need a forum for Fireworks or Flash or maybe Dreamweaver
    Go to the index at http://forums.adobe.com/index.jspa to find the correct forum for your question

  • HT1539 my daughter has taken the insert page with redemption code out of the dvd case and we cannot find it.  is there any way i can still download my digital copy of the movie in itunes?

    We Have managed to lose the insert page that came with our dvd and digital copy.  Is there a way i can still download the digital copy without the redemption code?

    Please please help me, if you know how.

  • My iMovie on my 2011 iMac does not recognize video taken on my new iPad, is there a way to resolve this?  I would like to take movies on my iPad and make movies in iMovie on my iMac.

    My iMovie on my 2011 iMac does not recognized videos taken on my new iPad.  Is there a way to correct this, or perhaps I am doing something incorrect.  When I connected my iPad to my iMac, iPhoto popped up, but not iMovie.

    You have to import the movie into iTunes via iOS file sharing, then drag the movie from the file sharing window in iTunes to the desktop, then you can import the movie into iMovie. Here are the details.
    http://support.apple.com/kb/HT4792

  • Is there any way to disable needles on a slider?

    I was wondering if there were any way to disable needles on a slider. What I have is a slider with four needles, but I need to be able to disable two of the needles programmatically. I am currently setting the needles to transparent color and setting their values to +/- inf, but the user can still accidently select and move them. While this does not cause the program to work incorrectly, it does cause some visual confusion, since I am using fill modes. Basically, I am using the slider to allow the user to select areas on a graph, the filled area between the sliders are the areas that are being measured on the graph. The extra two sliders are for when the user wants to select multiple areas for measurement, and thus are
    not always in use.
    Jon D
    Certified LabVIEW Developer.

    Just ran into this issue with an application.  Solution attached. 
    Use the Value Changed Event and set the current value of the slider to the previous value.  Some display artifacts occur as the UI thread is executed, but the subVI prevents the user from changing the value of a slider.
    -Adam
    Attachments:
    SliderNeedleLock.vi ‏17 KB
    TEST_SliderNeedleLock.vi ‏16 KB

  • Is there a way to know from what site and/or  what link a site came from.

    I want to use the same site and code but depending on fronm what link the site was created I want to forward to sit A.jsp respectiveley site B.jsp.
    How can I check this.
    Thanks

    the normal way is to use the Referer header (that's the right spelling, even though it's not spelled right), but that's not guaranteed. If it's within your app, passing it is the safer bet.

  • Is there a way to create or use a "slide viewed" variable?

    Hi, I would like to write a conditional action based on whether or not a learner has visited slide. I realize I could write an individual variable for every single slide, but that would be a very slow and manual way to set this up. From a logic perspective, I wanted to set up a single project action that would look something like this.
    If "slide viewed" = no, then do this...
    If "slide viewed" = yes, then don't do anything.
    Theoretically, it would seem possible since you can show a checkmark in the TOC next to a visited slide, but I can't quite figure out how to apply this to my project actions.
    Is something like this possible in Captivate 6 or 7?

    Disclaimer: I've only tried this with a couple slides, with very little error checking, but here's a single action approach I came up with.
    First I created a tracker variable. Then I labelled each slide with a single, distinct letter/number/character. (Not sure if there are any characters you should stay away from; maybe someone else can tell you which ones might cause problems as a slide name/label). So you might run out of letters/numbers/characters if you have a ton of slides. If you have enough unique, one-letter names, however, this is the logic behind the advanced action:
    If slide_tracker contains cpInfoCurrentSlideLabel
    Then: continue
    Else: do whatever you want it to do
    slide_tracker = slide_tracker + cpInfoCurrentSlideLabel
    So basically, if we've already been to this slide, the slide label will already been appended to our tracker variable. Thus it will contain the unique letter/symbol/number, and will do nothing (continue). If we haven't been to this slide, then we can do whatever we want to do and update the tracker to reflect that we've now been to this slide.
    Again, a disclaimer: I spent only five minutes trying this out, so there may be unforseen issues with it.

  • Is there a way to make drag and drop slides behave like question slides?

    I created a drag and drop interaction that I want to include in an assessment with other quiz questions. I am having two problems
    1. The submit and reset buttons do not display for the full 3.0s duration of the slide. Once the user clicks submit, the feedback caption displays and the buttons disappear.
    2. The slide auto advances to the next question. I want the slide pause until the user "clicks anywhere to continue."
    Does anyone know a work around to get a drag and drop slide to mimic question slide behavior?
    Thanks!

    Hi Itzelm, KurryKid,
    The HTML5 trackers doesn't tell you every feature that is not supported, sorry. It will never tell you that a lot of Effects are not supported either. There is an 'incomplete' list of supported features in the Help documentation. Here is my list (bit rough, no nice layout, sorry)
    Supported effects in HTML5 
    Entrance- Fly-in (all)  - Ease-in (all)Exit  - Fly-out (all)  - Ease-out (all)Motion Path  - Left-to-Right  - Left-to-Right Ease  - Pentagon  - Rectangle  - Right-to-left ease
      - Right-to-left3point  - RightToLeft  - Triangle  - ZigZag
    Audio objects (audio attached to invisible objects)
    If project is paused, audio attached to object that is made visible will not play in HTML whereas it does in SWF
    No rollovers (caption, image, slidelet)
    Questions:
    No Likert, FIB, Short Answer, Matching
    No question pools, random questions
    No right-click, double click
    No Text animations, no SWF animations(animated GIF possible)
    No Slide transitions
    No borders

  • Is there a way to check when a particular key was updated?

    Does tangosol keeps the last updated time for an entry?

    If the backing map isA local-scheme you can do something like this: (note that this example uses undocumented API which is subject to change)
    import com.tangosol.net.CacheFactory;
    import com.tangosol.net.NamedCache;
    import com.tangosol.net.cache.LocalCache;
    import com.tangosol.util.ClassHelper;
    import com.tangosol.util.InvocableMap;
    import com.tangosol.util.processor.AbstractProcessor;
    import java.util.Map;
    import java.util.Date;
    * dimitri
    public class Main extends AbstractProcessor
        public Object process(InvocableMap.Entry entry)
            Map  mapLocal      = null;
            Long lEntryUpdated = null;
            try
                mapLocal = (Map) ClassHelper.invoke(entry, "getMap", null);
                if (mapLocal instanceof LocalCache)
                    Object           oKeyBinary = ClassHelper.invoke(entry, "getBinaryKey", null);
                    LocalCache.Entry entryLocal = (LocalCache.Entry) ((LocalCache)mapLocal).getEntry(oKeyBinary);
                    if (entryLocal != null)
                        // See http://download.oracle.com/otn_hosted_doc/coherence/330/com/tangosol/net/cache/LocalCache.Entry.html
                        lEntryUpdated = new Long(entryLocal.getCreatedMillis());
            catch(Throwable t)
                throw ensureRuntimeException(t);
            return lEntryUpdated;
        public static void main(String[] asArg)
            try
                NamedCache cache = CacheFactory.getCache("test");
                cache.put("foo", "bar");
                Main main     = new Main();
                Long lUpdated = (Long) cache.invoke("foo", main);
                log("foo created: " + lUpdated == null ? "n/a" : new Date(lUpdated.longValue()).toString());
            catch (Throwable oops)
                err(oops);
        }Regards,
    Dimitri

  • My macbook pro was stolen. How can I make sure that the one that is linked to find my mac is this one and not an older computer.  Is there a way of seeing the serial number for the computer that is linked to find my mac?

    Is there a way to see serial number of computer that is linked to find my mac?

    No.
    Barry

  • Is there a way to link screennames on iChat?

    i use adium and you can link, or be on one or more screennames at one time, is there a way to do that with ichat?

    Chax can link the Buddy list into one window.
    http://www.ksuther.com/chax/
    (Or at least for Leopard it can But check you get the right version)
    7:02 PM Friday; February 22, 2008

  • Is there a way to predict the AppStore link

    I want to include a send to friend function in my installed application what would include a link to itself on the AppStore. Is there a way to predict ahead of time what the AppStore link will be.

    There is no easy predictor. If the source data is text, it will compress amazingly well. If it is an already compressed format, like video, you may end up with a larger file than the original.
    You can always make the tarball, and then see how big it is..if it is too large to fit on a single CD, maybe consider DVDs, or use a file splitter so your tar can span more than one CD.

Maybe you are looking for