Is there a way to pre-set the alarm volume on iPhone?

Is there a way to pre-set the alarm volume on iPhone? Every evening I have to remember to adjust the volume to 3 bars, versus full volume during the day.

I cannot believe this problem hasn't been rectified yet!
If I use the pre installed ringtone as an alarm and set it low so I don't jump out of my skin, then my call volume is too low the next day, so have to change it.
If I use a song as an alarm, I have the same problem, but its when I watch a video. I set it quiet, then jump out of my skin the next morning if I've left it tuned up after watching YouTube. Also works the other way if I've watched a video with the sound down, and forget to turn it back up, then I don't hear my alarm, which makes me late!
It could also do with an ascending volume option, so it starts nice and quiet to wake you gradually. My old phones from pre iPhone days had these features and they worked great.
Surely this isn't that much of an issue to sort out. Yet I've seen posts back as far as 2006 complaining about it.
Come on apple pull your finger out!

Similar Messages

Is there a way to permanently set the mailbox order?

Is there a way to permanently set the sequence in which mailboxes are displayed in the left-most panel of Mail? I can drag and drop the mailboxes into the order I want, and they seem to stick around - at least until I update any of the accounts. The moment I update an accounts prefernces in Preferences, Accounts, the display order is set to the same order that appears on the preferences display.
I have a fairly large number of email accounts, and often have to tweak settings, so it's a bit of a pain to have to reset the order every time I make a change.
This is occurring on both my MBP and my iMac.

Same question.
I recently left Snow Leopard to Mountain Lion.
Previously, in the side bar of Mail, (the one you make visible using "Show" in a previous post here), I was able to drag and drop any of the Reception mailboxes to the place I wanted to select, to put them in the order I wished, and this order remained until I decide to change it.
This seems not possible any more, or... just for the current session. If I close Mail and reopen, Reception boxes are re-ordered in alphabetic way.
Any way to make my choice permanent as before ???
To make it more clear, ordering my way is possible by drag and dropping for private mailboxes, but not for reception mailboxes associated to different mail accounts, the order is lost once Mail is closed.

Is there a way to pre-record the timing of the slides and effects in a keynote presentation, so that you can present it without having to press anything?

Hi! It would be great if someone could tell me how to pre-record timings in a keynote presentation, so that when presented, it plays by itself, based on the pre-set recordings. I know there is a way to do it by going to Inspector>Document> Audio> Record However when you do this, your computer also records the sounds it picks up with the microphone, which can greatly affect the sound. I have Keynote '09. Thanks in advance!
-AppleMe123

Open the Settings app > Notifications > Messages. Scroll down adn turn OFF "View In Lock Screen". You may want to consider setting Alert style to none, but this will not impact what happens when the screen is locked.

Is there a way to automatically set the file name in Acrobat Properties when exporting a PDF from Indesign?

When I used Quark to make a PDF, the title area in the PDF was automatically populated with the file name, there in the properties tab. We like use this area to confirm file names of original files, so we can keep track of drafts, (in case the file name of the PDF is changed, which our boss often does). Is there any way to set up InDesign to do the same?

@stadlock – I think I know what you mean…
You exported to PDF and changed the file name in the export dialog to a different one from the document name presented there the first time you exported that document. And in exports after that the new name will be presented in the dialog instead of the name of the document.
What you can do against that?
1. First time you want to export: Save before the document is exported. And do not save after it's exported with a new file name.
2. After the new file name is already there in the export dialog:
Type in the document name in the dialog. Export. Or abort after chosing a export preference. Save. Check again, if the document's file name is in the export dialog. If yes, procede like in suggestion #1. If not do a full export with the document's file name, save and then procede with suggestion #1.
Uwe

Is there a way to re-set the default fade-in/out setting for all slides?

Hi all, I don't know why all objects on all the slides of my captivate project are set as transition-> fade in/fade out. The result is that every single slide fades out after 3 seconds, even before the learners can finish reading.
The only solution I know is to change each single object from transition->fade in/fade out to No Transitions. However, it takes thousands of clicks.
Does anyone know that there is a one-step solution to get rid of this default fade in/fade out settings?
Or was there something that I did wrong which caused this default fade in/fade out?
Thank you very much.

Hi all, not only are my objects set to no transition, I set the object defaults to rest of slide rather than specific time (located in the same window above. That way slide duration does not matter (unless you are doing autoplay and not using navigation.) This way when my audio lengthens the timeline all my objects are there for the full duration
Also, another tip, once you have set your objects styles and preferences the way you like them you can export both, and import them into any new project that you wish to use them in rather than reset all the time.

CP5: Is there a way I can set the resolution size before I start recording?

When I launch Adobe Captivate 5, I click on "Create New.. Software Simulation", but I can't find a way of setting the screen size / resolution before I start recording, like there is when you click "Create New... Blank Project".
I prefer to do a new Software Simulation instead of a Blank Project because I can record in Demo, Training and Assement modes all at once, and I don't get this option when I start a project.
Can someone help me?
Many thanks!

Hello and welcome to the forum,
Choose 'Custom size' after having selected the application to record, and you will be able to choose a resolution. If you choose Application or Application region the current resolution, size of that application or that region will be kept. But with custom size you can have a resolution and the application snapping to that resolution.
Lilybiri

TS1258 Is there a way to re-set the monitor with an external keyboard, since my internal keyboard is not working?

My internal keyboard and mouse have stopped working, so I have attached an external keyboard and mouse. But now I need to re-set the monitor. Can I do it with an external keyboard?
I have the dark bands at the bottom of the internal display.

You cant switch off the power to the monitor but you can send it to sleep.
1 - Apple > System preferences > energy saver: set the monitor to sleep at the shortest duration
2 - While the second display is connected and powered on, System Preferences > Displays > Arrangement: deselect the Mirror Displays option
While the presentation plays on the secondary display, the Mac display will go to sleep as there is nothing on the screen during play, entering display sleep within seconds.

Is there any way I can set the jre version before I open the browser

I want to set the jre version of the browser before I open the window. Can I have any batch script that does this? Is this possible does any body already did this?

Have you tried the applet tag to specify the version runtime your
app will use? Here's a link to an old documentation, but the
principle should still apply, if it's what you're looking for:
http://java.sun.com/j2se/1.4.2/docs/guide/plugin/developer_guide/using_tags.html

Is there a way to automatically control the audio volume on safari? Some streaming video sites (Hulu, in particular), like to try to deafen me with the commercials. And yes, I'm not an idiot, I know that I can manually control the volume.

I've been searching for some way to automatically control the volume, so the commercials on streaming sites (Hulu, for example), don't deafen me. And yes, I am aware that I can manually control the volume with the volume keys on the keyboard or the slider in the menubar.

This really frustrates me, small differences between the apps that shouldn't be there.
I understand you can't change the keyboard shortcuts to be the same/similar, but this is totally different. Let's hope it changes soon.

Nokia 6086 - how to set the Alarm volume?

I know I'm not the only one to ask this question, but I've not yet seen an answer. Can anyone tell me how to increase (or decrease) the volume of the Alarm tone? I've looked all over the menus, I've looked in the manual, I've gone through both the Nokia and T-Mobile sites, but I've found nothing. Right now, my alarm tone is so quiet it's actually difficul to hear, not exactly appropriate for an alarm! Thanks,
Solved!
Go to Solution.

the standard alarms cant be changed volume wise you nrrd to select louder tone here is link for good loud one
http://mosh.nokia.com/content/531DDB2B1F444F31E040050A45300E79
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

I feel like a sucker. I bought an iPAD2 at Fry's where I was told by the salesman that the non 3-G version does have GPS. It does not have GPS. Is there any way I can use the GPS on my Iphone or Garmin to display in my new mostly unuseable iPad2?

Is there anyway to input a live, real time video feed into an iPad2? I would like to use it as a remote monitor for a microscope camera in electrophysiology. Our camera was designed to run off of an older Mac via a firewire connection. The camera is SUPERB but the computers are dated. The older computers connected to an AC line are electrically noisy. I have worked out converting the signal from our camera to HDMI and/or USB2 but the iPad2 will not allow any input except via iTunes which is not real time, and requires several steps. Is it possible to use the only mostly useless iPad2 as the excellent portable DC driven display which it is?!!! How do I get Apple to say anything but IGNORE, IGNORE IGNORE. This would be a universal application in academics and all I think I need is permission from the iPad2. The original signal was designed for Apple hardware. They can have the patents. HELP?

AJ Green wrote:
My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing. You need to enable location services.
Your wifi-only iPad does not have GPS. Read the specs for your device.

Is there any way i can get the pictures off my iphone 4 if my computer doesnt detect it ?

my computer cannot detect my iphone 4 and my phone is stuck on the charging screen is there anyway i can get my pictures off it ?

What do you mean that your phone is stuck on the charging screen? Have you tried resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Apple appears the device is resetting and the Home screen should display shortly.
Cheers,
GB

Is there a way to tell itunes the location of an iphone backup?

the backup i want is in the correct folder but itunes won't recognise it.

OK one way is to simply change the location in iTunes preferences under "iTunes Music folder location" from the current external to the new external. Then use the consolidate command and iTunes will copy everything to the new external AND change the links in iTunes to point to the new location.
Cheers,
Patrick

Is there any way I can get the pictures on my iPhone 5c to be the whole screen instead of with a black band across the top and bottom?

My new phone only let's me take pictures with a black band across the top and bottom instead of the whole screen, does anyone know how to change this?

AJ Green wrote:
My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing. You need to enable location services.
Your wifi-only iPad does not have GPS. Read the specs for your device.

Is there a way to permanently set a font in pages?

The default font in pages is Helvetica. Every time I start a new document, I have to change it to Times New Roman. Is there a way to permanently set the font as Times New Roman so that I do not have to do it every time. Thanks.

You need to create your own default template. Open the blank template & set up your document with the line spacing, margins, headers, etc. as you'd like. Redefine all of the paragraph & character styles to have your desired font. You can set default wrap for any object as well as many other settings. Insert a table, click in it & choose the font, size, color, etc. you want in the fonts panel or format bar. You can do similar changes to inserted objects & text boxes. While you're at it resize the box if you want, set the amount of extra space in the wrap inspector, etc. Delete each text box, object & table after you've set them.
Now, save this document as a template & select that template as default in preferences. If you decide to make any changes to the template down the road, just Save As Template again with the same name & replace the previous version. All of your new documents will have these settings for inserted objects, images & tables. Unfortunately, the settings won't apply to any other templates or "foreign" documents you open with Pages.

Is there a way to pre-set the alarm volume on iPhone?

Similar Messages

Maybe you are looking for