Is there a way to re-set the default fade-in/out setting for all slides?

Hi all, I don't know why all objects on all the slides of my captivate project are set as transition-> fade in/fade out. The result is that every single slide fades out after 3 seconds, even before the learners can finish reading.
The only solution I know is to change each single object from transition->fade in/fade out to No Transitions. However, it takes thousands of clicks.
Does anyone know that there is a one-step solution to get rid of this default fade in/fade out settings?
Or was there something that I did wrong which caused this default fade in/fade out?
Thank you very much.

Hi all, not only are my objects set to no transition, I set the object defaults to rest of slide rather than specific time (located in the same window above. That way slide duration does not matter (unless you are doing autoplay and not using navigation.) This way when my audio lengthens the timeline all my objects are there for the full duration
Also, another tip, once you have set your objects styles and preferences the way you like them you can export both, and import them into any new project that you wish to use them in rather than reset all the time.

Similar Messages

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

beatngu13
I made an account just to "like" your comment and say that you are a god among men.
I've been searching for hours about how to make the zoom level persistent throughout following links in various PDF's I have, and most sources were saying to just buy acrobat pro and edit the bookmarks manually with it.
I saw that it was possible to write an application to change the property, and considered doing it after the only pre-existing custom application I could find was asking for $50.
Thanks to you, I no longer have to worry about re-zooming every time I click a bookmark, and I'm not out $50 or the time it would take to code an app myself!
From the bottom of my heart, thank you!

How can we show a custom column to all libraries in the default view without creating that for all libraries everytime

Hi,
Any help?
Thanks
srabon

You can use powershell script below which loops through each libraries and sets view.You can modify the script to user it for single library as well.
Add-PSSnapin Microsoft.SharePoint.PowerShell -erroraction SilentlyContinue
$siteURL = "<YOURSITEURL>"
$site = Get-SPSite($siteURL)
foreach($web in $site.AllWebs) {
foreach($list in $web.Lists) {
if($list.BaseType -eq "DocumentLibrary") {
// the variables `$web` and `$list` already reference the objects you need
//$site = New-Object Microsoft.SharePoint.SPSite($SiteURL) ;
//$web = $site.OpenWeb($SiteURL);
// new instance of the list is necessary to avoid the error "Collection was modified"
$newList = $web.Lists.item($list.ID);
$viewfields = New-Object System.Collections.Specialized.StringCollection
$viewfields.Add("DocIcon")
$viewfields.Add("LinkFilename")
$viewfields.Add("_UIVersionString")
$viewfields.Add("FileSizeDisplay")
$viewfields.Add("Created")
$viewfields.Add("Modified")
$viewfields.Add("Editor")
[void]$newList.Views.Add(<VIEWNAME>, $viewfields, "", 100, $true, $true)
$newList.Update();
// setting the default view
$view=$newList.Views["<VIEWNAME>"]
$view.DefaultView = $true
$view.Update()
$web.Dispose();
$site.Dispose();
Ref: http://stackoverflow.com/questions/10015311/part2-sharepoint-2010-powershell-loop-through-all-document-libraries-creat
Hope that helps!
Avni Bhatt

Is there any way to PAUSE/RESUME the actual recording while recording a Video Demo slide in Captivate 8?

If I have to take an "off-screen" action while recording a video demo slide in Captivate I am forced to END and start a separate video demo to continue.
This fragments my demo and seems an unnecessary set of steps.
Is there a way to pause the recording for long enough, say to clear my throat, and then resume?
Thanks.

Hi kjjr54,
Please refer to the link below:
Create Mobile Learning & Elearning Content. Screen Capture, Screen Recorder | Adobe Captivate 8
Hope this helps!
Regards,
Sheena

Is there any way to close just the "current tab" in firefox rather than all 3 or 4 that may be open and lose the entire web page?

If I am on a website and open a few different pages, and then decide to go back to an earlier page, or close that particular page, I get a message that says you are about to close 3 tabs or 4 tabs etc. If I only want to close the "current tab" I am on, I was able to do that with Internet Explorer. Is there any way this can be done on Firefox?

For more help, see the '''[[Tabbed browsing]]''' page.

Is there any way to go beyond the 99 TRACKS of content limitation for a DVD

Greetings All,
I don't think there is much hope of getting the solution to my dilemma that I'm hoping for, but perhaps someone out there has overcome a similiar situation to mine.
As you can see from the topic of my post, I'm hoping there might be some way to get DVD SP to 'work-around' the DVD-standard of 99 tracks of content. To give you a better idea of why I'm trying to do this I'll just briefly outline my project.
I'm creating a FAMILY TREE DVD with multiple menus (each menu representing a specific family). The object is to encompass extended family as well as ancestry up to the current generation. The names for each person that appear on the menu are links to a slideshow (and usually a very short one at that - perhaps 3 to 5 pix). As you've guessed, I've reached the limit of 99 slideshows but with barely having gone past the 1.5 GB mark.
In order to meet the desired objective of this project, it would be preferable to have all the slideshows contained on the one DVD as this way, the interconnections between the various families can be more easily demonstrated.
Anyway, I know its a long shot as I've tried to do some research on this myself and have come up empty.
Any help or advice offered would be greatly appreciated.
Thanks,
Karl

99 title limit - this includes Tracks and Stories!
I would imagine a project like this would be possible with chapter end jumps although ,like you guys said, it would be a PITA.
No way to get beyond the 99 title limit in DVDSP. Tracks and stories are counted as 1 title each so the limits includes both tracks and stories. I could see having up to 99 Tracks and 99 chapters while including chapter end jumps for each slide show section. Like Aldolfo said this might put pressure on a player. Remember DVDSP is still an abstraction layer tool, hiding most of the mundane DVD details from the author.
This title would be a breeze in a spec tool, like the studios use to author their titles. Your still limited to 99 tracks (VTS) but these tools give you access to such things as PGCs and Programs. In fact, this title could be done with 1 track(VTS) in such a tool.
and....I wouldn't want to target 9801 separate Buttons
Message was edited by: Eric Pautsch1

Is there a way to permanently change the default video player to VLC?

I installed the QuickTime update and now all my AVIs won't play with sound. Downloaded VLC and they will play with sound. I went to 'Get Info' on an avi and changed 'open with' to VLC and selected 'change all'. They will open and play with VLC until I re-boot, then everything changes back to QuickTime. Right now I just hate Quicktime and don't want to use it. How can I change the default video player to VLC without Quicktime changing it back when I reboot?

How can I change the default video player to VLC without Quicktime changing it back when I reboot?
Sounds like you changed it properly. The question now becomes, "Why isn't the change being saved?" Have you tried repairing your disk permissions? As to the original problem, it could be that the QT upgrade has rearranged the order of your stored codec components table called by QT. While this table is rebuilt each time the QT Player is opened, the table seems to be ordered from latest component installments to oldest. So there is the possibility that two (or more) components are allocated for playback of you AVI files and the wrong one now has priority. If you can find it (e.g., possibly Perian), you could simply remove it from the QT components folder and then replace it to again change the "build" order for the table. (Basically, you would need to run a component conflict test strategy here.)

Is there a way to make Firefox the default browser?

No more detail is needed

hello cole_l, yes - please see [[Make Firefox the default browser on Android]] for instructions.

How do I set the default page when I select "+" for a new tab? Right now it defaults to Yahoo search and I want to set it to my Speed Dial page. I did have the default page set to Speed Dial but I can't find anywhere how I did it in the past.

You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
This is the page that loads:
http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
How did Yahoo embed this in the Tab settings?

Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

When I try to play a movie from Netflix, it keeps asking me to change to 32-bit. Is there any way to make this the default?

I use an iMac. Just a year old.

There is a way:
[https://support.mozilla.com/no/questions/792633 https://support.mozilla.com/no/questions/792633]

How do I set the default file path for the Place command?

I keep my graphics files for each document in a particular folder. Every time I open an existing InDesign document and place a new image I have to browse back to that location - even though all of the previous images in that document came from the same folder. InDesign does not remember the file path that was used previously in the document. This is very annoying.
IS THERE A WAY TO SET THE DEFAULT FILE PATH, OR LOCATION, FOR IMAGE FILES?
I have looked through the preferences, searched the forums and internet, but I have not found any reference to setting default paths. Is there a setting like the one in MS Word called "File Locations" on the Options toolbox?
Thank you.

Since you're working in ID on Windows, you can take advantage of a neat trick in Windows. Copy the file path out of the File Explorer address bar and paste it directly into the Place filename field. That will jump you directly to the desired volume. For example, let's say I want to place a graphic located at X:\PS Jobs\May PS\709672bp\Working Source Files\Links. I copy that entire path from the File Explorer address bar, go to InDesign, select File|Place, and press Control + V to paste that path into the filename field. I press the Open button and Shazam! I'm there instantly, without a bunch of navigation.
You can do the same thing in the File|Save As and File|Export fields. Let's say you want export a PDF file from InDesign to the volume X:\PS Jobs\May PS\709672bp\Working PDF Files. First copy the desired file path from the File Explorer window. In InDesign, select File|Export, click anywhere in the filename field, and press the Home key to move the insertion point to the front of the filename. Press Control + V to paste that path in front of the filename, then add the backslash character (\). The filename will now look like this: X:\PS Jobs\May PS\709672bp\Working PDF Files\Filename.pdf. Press the Save button to bring up the Export Adobe PDF window. Select your desired PDF preset, press the Export button, and the PDF file will magically appear in the desired volume.
This sounds really complicated, but it's not. In practice, it only takes a few seconds. I probably save an hour's worth of needless navigation every day with this technique.

How do I set the default colour of hyperlinks to blue?

Hi,
In Pages 5.2.2, I've noticed that my new hyperlinks for web pages and email addresses are black.
Apart from changing them to blue for each individual link, is there a way to make blue the default color?
Thanks,
Richard

Select the word that is linked. Press Command+T to launch the Font Tool. The left drop-down button on that toolbar is for underlined text. Choose color from this menu. Pick your hyperlink color, and it will change in your document.
Now, while the hyperlinked word with its new color is still selected, you can update the existing Link character style, or press + to create a new one from your selected text. Change the name to Blue Link, press return, and you are done. The next time you need a blue hyperlink after you have added one, select the hyperlinked word, and choose the Blue Link character style. Also useful, if you just want a blue underlined word that is not a hyperlink.
To make the hyperlink color default to blue, you will have to create a template that has the Character Style Link changed to blue. There is no setting you can change otherwise.

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Is there a way to create an action or keyboard shortcut to set Crop tool to the front window size?

Is there any way to create an action or keyboard shortcut to set the Crop tool to the front window size in Photoshop CS6?
I find that I use that several times a day. I got used to it being the top choice in the Crop tool presets menu.
Thanks.

It depends on whether you have the cloud version or perpetual license version.
For the cloud version press I (eye)
For the perpectual version press F

If you have an itunes acct that was not set up to share and the lap top it was on is no longer working, is there a way to open up the old itunes acct to get music and photos? This was before icloud was available, can you reset your password?

If you have an itunes acct that was not set up to share and the lap top it was on is no longer working, is there a way to open up the old itunes acct to get music and photos off of it? This was before Icloud was available. Can you reset your itunes password somehow?

iTunes and the iTunes Store won't have anything to do with your photos. Those would be stored only on your laptop unless you made a backup of some sort. If you didn't, and the hard drive in your laptop has failed, then your photos are gone unless you wish to pay a disk recovery service a lot of money to try and get them back.
As to your music, if you purchased it from the iTunes Store you can probably re-download it. Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time. You can see what content you can download here:
http://support.apple.com/kb/HT5085
You can also re-download content using an iOS device.
For full instructions, see:
http://support.apple.com/kb/ht2519
Regards.

Is there a way to re-set the default fade-in/out setting for all slides?

Similar Messages

Maybe you are looking for