Is there any chance to use the iMac additionally to the Cinema Display as an external display for the MacBook,

I do have a MacBook 13" connected to the Cinema Display and this works fine. As I do also an old iMac which I do not use any more, is there any chance to use this iMac as an additional monitor next to the Cinema Display. I would be great to have both of them running in parallel and bring the iMac to an use again.

Use a product such as ScreenRecycler.
(64540)

Similar Messages

HT3924 Is there any way to use 2010 iMac on a display from PC's HDMI or DVI port?

Is there anykind of adapter for my problem? I would like sometimes use my PC and I would like to use 2010 iMacs display as my PC's display.

If you your iMac is a 2009 or 2010 27" iMac then yes you can use it as an external display for your PC. Please read Target Display Mode 2009 & 2010 iMacs for additional information.

SAP Java lib for SOAP: is there any chance to use HTTP-compression?

We use 3rd party web service in java, they plan to use HTTP-compression to save the bandwidth. At the moment I have no idea how to turn it on in SAP Java libs for SOAP.
Any help will be appreciated.

Hi Kirill,
HTTP-compression is something, which occurs at the HTTP protocol level (transparent and below the SAOP protocol) and is controlled by HTTP protocol headers.
To enable HTTP-compression, you will "somehow" have to manipulate the http layer of the SAP SOAP stack.
Good starting point to look for further information is the NWDS help. Use the search topics "header compress".
Regards
Gregor

Are there any requirements of a HDD before you put it in as an extra Hard Drive for a Macbook Pro?

I'm putting in my old SATA HDD from my old laptop into my Mackbook Pro. Any requirements for it like reformatting or adding certain files? Thanks!

Welcome to the Apple Support Communities
Just install it and use it. The only thing you have to take care of is if you are going to install OS X in it. In this case, you may have to format the HDD to use a GPT partition table and "Mac OS Extended (Journaled)", but apart from that, you won't have any problem

Is it possible to use an iMac as an external monitor for a MacBook?

What is the process (if any) to turn off the iMac's system and make it essentially an external monitor for the MacBook?

No, it's not possible. Your iMac simply does not have a "video in" port for the MacBook's "video out" port. While Mike N. (nahyunil)'s option may give the illusion that you have two monitors, it does NOT turn off the system on the iMac. The iMac must be on and fully functional for that option to work.
-Doug

Is there any restriction to use ora:getFaultAsString() ??

Hi All,
I am using Jdev and SOA 11.1.1.2
I have a process and in that I am using a transforation.
I have tested below scenarios:
1) We have a dateconversion function, and i passed in correct value to that function so it got faulted and throws subLanguage Exception.
2)I have given wrong DVM name, so again it got faulted and throws subLanguage Exception.
3)I defined an XSL variable and used that in another template without passing, so it got faulted and throws subLanguage Exception.
4)I used a substring function without giving starting and ending indexes..so it got faulted and throws subLanguage Exception.
I have a catchAll and in that i am sending notification and in that notification i am using conact('CustomInfo',ora:getFaultAsString())
I found that except in 4th scenario in all scenarios ora:getFaultAsString() is returning null .(Even for 1,2,3, scenarios it is giving javax.xml.transform.TransformerException and for 4th scenario itis giving Fatal Error)
I am giving errors returned below
SubString Error(Successful)
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<subLanguageExecutionFault>
<part name="summary">
<summary>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is
ora:processXSLT('xsl/TransformSiebelOrderABMToTransportationOrder.xsl',bpws:getVariableData('receiveSiebelOrderABM_Consume_Message_InputVariable','body')).
The XPath expression failed to execute; the reason was: XML-22900: (Fatal Error) An internal error condition occurred..
Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
</summary>
</part>
<part name="code">
<code>XPathExecutionError</code>
</part>
</subLanguageExecutionFault>
</bpelFault>
DVM Error
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<subLanguageExecutionFault>
<part name="summary">
<summary>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is
ora:processXSLT('xsl/TransformSiebelOrderABMToTransportationOrder.xsl',bpws:getVariableData('receiveSiebelOrderABM_Consume_Message_InputVariable','body')).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: <Line 441,
Column 233>: XML-22044: (Error) Extension function error: Error invoking 'lookupValue':'oracle.tip.dvm.exception.DVMValidationException:
Unable to locate DVM "oramds:/deployed-composites/ZDVM_STOP_TYPE_rev1.1/STOP_TYPE.dvm"
The Exception is "MDS-00013: no metadata found for metadata object "/deployed-composites/ZDVM_STOP_TYPE_rev1.1/STOP_TYPE.dvm""
Please ensure the DVM exists at the location specified.'.
Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
</summary>
</part>
<part name="code">
<code>XPathExecutionError</code>
</part>
</subLanguageExecutionFault>
</bpelFault>
Date Format Error
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<subLanguageExecutionFault>
<part name="summary">
<summary>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is
ora:processXSLT('xsl/TransformSiebelOrderABMToTransportationOrder.xsl',bpws:getVariableData('receiveSiebelOrderABM_Consume_Message_InputVariable','body')).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: <Line 135,
Column 196>: XML-22044: (Error) Extension function error: Error invoking 'convertFormattedDttmToXSDDttm':'java.text.ParseException:
Unparseable date: "10/17/201114:52:25"'.
Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary>
</part>
<part name="code">
<code>XPathExecutionError</code>
</part>
</subLanguageExecutionFault>
</bpelFault>
When a XSL variable is out of scope
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<subLanguageExecutionFault>
<part name="summary">
<summary>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is
ora:processXSLT('xsl/TransformSiebelOrderABMToTransportationOrder.xsl',bpws:getVariableData('receiveSiebelOrderABM_Consume_Message_InputVariable','body')).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException:
<Line 52, Column 50>: XML-22031: (Error) Variable not defined: 'Param'..
Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary>
</part>
<part name="code">
<code>XPathExecutionError</code>
</part>
</subLanguageExecutionFault>
</bpelFault>Is there any restriction to use ora:getFaultAsString()
Please guide me
Regards
PavanKumar.M

Hi Pavan ,
We frequently observe the following error in our logs:
<Feb 11, 2011 11:12:50 AM CET> <Error> <oracle.soa.bpel.engine.xml> <BEA-000000> <BPEL1AssignWMP
ORABPEL-09500
XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is ora:processXSLT('xsl/Xform_CustomerPartyListABMReqMsg_to_CustomerPartyEBMReqMsg.xsl',bpws:getVariableData('SyncCustomerPartyListReqMsg','SyncCustomerPartyList'),bpws:getVariableData('params')).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: <Line 15, Column 98>: XML-22031: (Error) Variable not defined: 'endIndex'..
Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
Can you please share ..how you resolved it?
Regards,
Shagufta
Edited by: 830719 on Feb 11, 2011 2:34 AM

My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?

My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?

Is this an older "round" version of the AirPort Extreme? If yes, it is true that AirPort Utility 6.x no longer supports the older AirPort Extreme and AirPort Express models.
A model number......located on the bottom of the Extreme or on the side of the Express would be helpful to confirm what you have.
Apple probably does want you to buy a new AirPort Extreme.
The workaround might be to use a Mac or PC running a 5.x version of AirPort Utility.
A more complicated workaround would be to install AirPort Utility 5.6 on Mountain Lion. This is not supported by Apple......it does work for me.....but may not work for you. See this article for more details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Is there any chance that FM reception gets made available on the next iPhone model?

Hi,
I did buy an iPhone 3G then upgraded iPhone 4 but always felt that Apple's devices missed a very useful function (and hoped that it would eventually be made available), FM reception! Now I have that cool iPhone and yet I have to have my iPhone to listen to my MP3s and a FM radio to be able to listen to the gym FM broadcasting or listen to my favorite FM station which doesn't broadcast on the internet! And I definitely don't see myself forking away a hundred on an iPod Nano just because of its FM receiver!!!
Is there a hardware limitation preventing iPhone 4 from receiving FM broadcasting?
Is there any chance that FM reception gets made available on the next iPhone model?
Please give your iPhone customer FM reception!!! PLEASE!!!!!!

We're all just fellow users here and have no idea what Apple might have in mind for future iPhone versions. You can offer your suggestion to Apple via their feedback page, if you wish:
http://www.apple.com/feedback/iphone.html
Regards.

Is there any chance that Tab Grouping feature (like the one in Opera 11) will become native for Firefox? Could be very helpful.

Is there any chance that Tab Grouping feature (similar to Opera 11) will appear in Firefox? Could be very helpful and convenient.

Hi ThaPlaya,
I feel your pain. I am in charge of over 250 PCs and laptops. Flash Player stopped working for me after an update. I have been working on this issue non-stop since the middle of October, 2012. It's time-consuming, and even after applying the latest Flash update, it still doesn't work properly.
I am beyond frustrated! I have people calling me left and right saying that they can't access content. I have been using this site https://www.mozilla.org/en-US/plugincheck/ to try and do a browser plug-in check while in IE an dFirefox. Even after I update all plug-ins, Flash still works about half the time.
For instance, the principal of the middle and high school wanted to view an online magazine http://upfront.scholastic.com/issues/12_10_12, about 3 pages load on this site. The rest continue to say LOADING. When I right-click on a page and then left-click on ABOUT ADOBE 11.5.502.110, it seems I am using the most up-to-date version for IE and Firefox.
Students are trying to access sumdog.com and stmath.com, both run using Flash. STMath is now working a bit better because I allowed some exceptions in our internet content filtering appliance, and in our firewall, sumdog still works half the time.
If Adobe is going to update their browser plug-ins, they need to test and retest before giving the public access. This situation is causing me a ton of problems!
Sorry to infiltrate your post...
Dawn/Flower1964

I'm using TestStand/Labview to do a string value test. Is there any way to use a variable in the edit string value test?? This forces you to hard code a string to test against.

I'm using TestStand 2.0/Labview 6i to do a string value test. Is there any way to use a string variable in the edit string value test instead of an actual string?? This forces you to hard code a string to test against.

Hi ART,
You can also use the LimitLoader step to load your string into to step similar to the Numeric Step type.
There should be an example of this in the Resource Library | TestStand
Regards
Ray Farmer
Regards
Ray Farmer

My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

Kbkohn wrote:
I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back.
Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged. Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
Have you done so? If you have, all of the data is either in iCloud or iTunes on your computer. Replace the device and restore the new iDevice with the backup of the old one.

I lost my macbook air and i didnt turn on the localization aption... is there any chance to find it?

i lost my macbook air and i didnt turn on the localization aption... is there any chance to find it?

chances are slim to none.

Is there any constrain in using the same order type for MTS and MTO

Hi,
i have the constrain to use single production order type .
Can i use single order type for MTO and MTS.
is there any constrain in using the same order type for MTS and MTO.
pls help me.

Hi,
There is no constraint or limitation in using the same production order type for MTS and MTO . Settings in requirement class and material master will mainly control whether the flow is MTS or MTO.
Regards,
Mrinal

Is there any way to use flash without all the bloated code?

I want to put a flash player on my site, however with dreamweaver the "insert movie" option puts a ton code in my markup to the point where i cant even tell what im looking at. Is there any way to use flash without all the bloat?

Yes and no. Some bloat as you call it is necessary to support all browsers. That said, this on-line tool takes your Flash code and converts it to valid XHTML Strict standards. In the process, the code is minimized a bit. Be sure to test in an XHTML Strict doc type page.
http://www.validifier.com/
Nancy O.
Alt-Web Design & A
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Is there any way to use RUN button to deploy the application and open IE...

Hi
Thank you for reading my post
i used to use Run button to compile / deploy and run (opening the browser to project context path) .
i want to know is there any way to use RUN button to deploy an application to standalone OC4J and opening browser?
I know that we can define ear or war deployment profiles and use them to deploy the application to stand alone server , but i want a single click solution.
thanks

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Is there any chance to use the iMac additionally to the Cinema Display as an external display for the MacBook,

Similar Messages

Maybe you are looking for