Is there any codings to isolate a system from LAN using java

This is regarding my final year project.Can anybody here tell me the way to write a coding or program to remove a system connected in LAN without any manual intervention.
Thanks in advance for all who post their valuable suggestions here

This is entirely system dependent. You need to find a command line program you can run which will do this.
e.g. On linux you can do
ifconfig eth0 down

Similar Messages

  • I lost my iphone 4 yesterday , is there any way to destroy the system of it using the serial number? Also , Can thieves access my photos or private things even if there was a passcode on my iphone?!

    Please help me ,I am really worried !

    Maha1992 wrote:
    Unfortunately I did not install find my iphone in the lost iphone so I cant  use it . Can they restore the information and photos easily?! I mean the computer does not ask them for the passcode or the password of the apple ID inorder to complete the process of restoring?!
    If they do restore it in iTunes, that process is going to wipe all your content from it, so your information would be gone.  Yes, they can then go on and use your device as theirs, but your information is wiped from it at that point.
    For future reference, along with the passcode, you can set it to erase everything after 10 failed passcode attempts.  As long as you have regularly sync'd content back to your computer and maintained an up to date backup, you have safeguarded your content for your own recovery and use.
    And in iOS 7 an iCloud account and find my phone activation is worth it just for Activation Lock, even if you don't care about any other iCloud features (all of which you can simply disable and not use if you choose to).

  • Is there any way to run a report from database?

    Is there any way to run a report from database using trigger?
    A report needs to be printed out when a new row is inserted into a table.

    If you are using the Reports Server it is possible to start a report from a trigger by using the UTL_HTTP package (in the sys schema) to call the report URL. This should work with DESTINATION=PRINTER.
    Hope this helps.

  • Is there any BAPI's to get system information

    HI All,
    Is there any BAPI's to get system information like name which NWcomponent is installed, version, function modules which are implemented.
    ITS VERY URGENT
    Thanks

    Hi,
    bapi for getting the details of system inthe sense euipment i believe so try this bapi
    BAPI_EQUI_GETDETAIL
    BAPI_EQUI_GETLIST
    Regards,
    sana.

  • Is there any way to click the System Message Box button  through code?

    Hi,
    Is there any way to click the System Message Box button through code?
    Is there any way to restrict the System Message Box ?
    The requirement is, i need to open the MRP Wizard form in MRP.it s run automatically.after completion of the wizard is there finish button.after clicking of the finish button, there have a system message. i want to click on "Yes" button through coding.
    when system message box open.my code is stopped.if i press yes code is running.   
    Thanks in advance.

    Thanks for replay
    bellow given the code
    i am using, when i call the finishMrp function its going to take the itemId from XML and click to the finish button.
    There have a system message .when system message fair my debugging stopped. Please give me any idea.
    Public Function Execuate() As Boolean
    Dim strSQL As String
      Dim objRS As SAPbobsCOM.Recordset
        Dim intLoop As Integer
        Dim objForm As SAPbouiCOM.Form
        objForm = objAddOnCentral.objApplication.Forms.ActiveForm
        objRS = objAddOnCentral.objCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
        strSQL = "SELECT U_MRPCode From [@ACSYMRPLIST]"
        objRS.DoQuery(strSQL)
        If objRS.EoF Then
        Throw New Exception("No MRP Scenario Scheudled")
        Return False
        End If
    For intLoop = 1 To objRS.RecordCount
                objForm.Freeze(True)
                If intLoop = 1 Then
                initializeMRPRun()
                System.Windows.Forms.Application.DoEvents()
                Else
                reinitialize()
                System.Windows.Forms.Application.DoEvents()
                End If
                MRPRun(objRS.Fields.Item("U_MRPCode").Value)
                System.Windows.Forms.Application.DoEvents()
                objForm.Freeze(False)
                objRS.MoveNext()
            Nex
            finishMRPRun()
            Return True
        End Function
       Private Sub finishMRPRun()
            Dim strResource As String
            Dim objXML As New XmlDocument
            Dim objXMLNode As XmlNode
            Dim objXMLNodeList As XmlNodeList
            strResource = System.Reflection.Assembly.GetExecutingAssembly().GetName().Name & "." & "AutoStart.xml"
            objXML.Load(System.Reflection.Assembly.GetExecutingAssembly.GetManifestResourceStream(strResource))
            objXMLNodeList = objXML.SelectNodes("/AutoMRPScript/FinishMRP/Instruction")
            For Each objXMLNode In objXMLNodeList 'objXML.ChildNodes.Item(1).ChildNodes
                Select Case objXMLNode.Attributes("OPType").Value
                    Case "2"
                        systemMessageactiveFormButton(objXMLNode)
                End Select
            Next
        End Sub
    Private Sub systemMessageactiveFormButton(ByVal Instruction As XmlNode)
            Dim objForm As SAPbouiCOM.Form
            objForm = objAddOnCentral.objApplication.Forms.ActiveForm
            objForm.Items.Item(Instruction.Attributes("ItemID").Value).Click()
        End Sub
    Edited by: Badulla Sk on Dec 31, 2009 11:24 AM
    Edited by: Badulla Sk on Dec 31, 2009 11:25 AM

  • If I upgrade SP 11 to now, Is there any impackt on the configured system?.

    Hi SRM GURUs,
    I am Using SRM 5.5 with Extended Classic Scenario, SUS, cFolders, LAC, and MDM.
    I want to Upgrade Service Package 11 to 14 ( latest one). I have done most of the configuration. If I upgrade now, Is there any impackt on the configured system?.
    Thanks in Advance.
    Regards,
    John.

    Hi Masa,
    Thank you so much for your quick response.  You mean there will be no impacts on configured right.
    The latest SP15 only but SAP recomends n-1. Thats way I am selecting SP14.
    I am awarding points here.
    Regards,
    John.

  • I have a 2007 13" Macbook White. Is there any way to upgrade my OS from 10.6.8 to anything above 10.7?

    I have a 2007 13" Macbook White. Is there any way to upgrade my OS from 10.6.8 to anything above 10.7? I keep getting an error message when I try to download 10.8.3 because Apple didn't make it compatible with my machine, but I really only need 10.7. So is there ANY possible way to do this with my current Macbook? Thanks for the help guys.

    I have a 2007 13" Macbook White. Is there any way to upgrade my OS from 10.6.8 to anything above 10.7
    According to these system requirements, no, there is no way to go higher than Lion (10.7), as Mountain Lion (10.8) will not be compatible.
    http://www.apple.com/osx/specs/
    Also note that both Lion and Mountain Lion are memory hogs and the realistic minimum RAM should be 4 GB; you can run it with 2 GB, but depending on how you use your machine, you may not be happy with its performance.

  • Is there any ways to stop Quicktime player from occupying audio hardware?

    Hi, my PC system is Window XP Pro SP2, HP xw8400 Workstation w/ 2G Ram. And the PC has a Digidesign Pro Tools HD 1 audio system installed.
    My problem is that after Quicktime player lauches, it will occupy the Pro Tools HD's hardware. And if I want to start Pro Tools software, "digidesign hardware is in use by another application." warning will occur and Pro Tools software will then quit. BTW, Digidesign's audio driver is not multi-clients compatible.
    I have set Quicktime player's audio playback device to PC motherboard's audio device, and system's audio device is also motherboard's audio device, I even have checked the "use default device only" option. I can't understand why Quicktime player still occupies Digidesign's hardware, even it plays back audio through motherboard's audio device.
    Though I can quite Quicktime player before lauching Pro Tools software, I still feel it's annoying and inconvenient, and want to know some ways to solve this problem.
    Anyone can help? Thanks in advance. I have asked for help in Digidesign's offcial forum, no response.
    BTW, the Quicktime player version on my system is 7.6.5, and each time Quicktime player launches, the sample rate led on the Digidesign's audio interface will flash, indicating that QT player is accessing Digidesign's hardware.
    Message was edited by: compusic
    Message was edited by: compusic

    Victor.jacob wrote:
    I have a Blue Ant Q2 Bluetooth headset. When it's paired, is there any way to stop all audio from streaming to it? I want to hear the iPad "ring" so I don't have to have the earpiece in my ear all day, or be able to play audio through the speakers instead of the earpiece. I feel like I'm missing something simple.
    You are missing something simple but lets get it to stop as you want. Go to Settings/General/Bluetooth turn it off.

  • Is there any way to recover ePrinter account email by using a ePrinter e-mail address?

    My problem is as follows, I registered my printer onto ePrintCenter and set custom email address to my printer. But, I logged out from the ePrintCenter and sine that time I couldn't login into the ePrintCenter any more as the system says that the e-mail address I set for ePrinterCenter is not used in the system.
    So, I have my ePrinter e-mail, is there any way to recover ePrintCenter email address by using the printer email?
    Thank you, Agrifert.

    Hi Agrifert,
    Unfortunately its not possible to retrieve the email address you used to create your ePrintCenter account from the printer's ePrint email address. Are you still unable to log in to your ePrintCenter account? I'll wait to hear back from you before suggesting any further actions.
    Best.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

    I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

    Technical issues aside, there's still a legal issue.
    Neither 2006 nor 2007 MacBooks shipped with Snow Leopard 'factory' installed. OS X 10.6 Snow Leopard became available in September 2009. So you purchased and installed a Snow Leopard upgrade disc on the 2007 system at some point.
    If your Snow Leopard upgrade was a single-user copy, then legally, you need to purchase another one for the second computer. If your Snow Leopard upgrade was a Family Pack 5-user license, then you're good to go.
    http://store.apple.com/us/question/answers/product/MC574Z/A?pqid=QTUXD7AF4YU9FJD YUTDPCKYKUDDDXKHTK
    If you have an active MobileMe account, Apple was giving away a single-user upgrade copy of Snow Leopard for a limited time, and you should have received an email with a link, or been offered the opportunity when you signed in to your MobileMe account on the web:
    http://www.macrumors.com/2012/04/24/free-snow-leopard-discs-for-mobileme-users-n ow-arriving/
    Worst case, single-user Snow Leopard upgrade discs are $29 retail, direct from Apple. I'd hate to have two computers and no OS installation CD's for whatever version I'm currently using.

  • Is there any way to delete saved messages from IPhone 4 memory?

    Is there any way to delete saved messages from IPhone 4 memory?

    Firstly you DO NOT have to do a factory reset / wipe device, it is simply not required to get the space back!!
    Mine had 3GB and I just got rid of it all, here is how:
    Make a backup in iTunes
    open iBackupBot (Google it)
    Go to the relevant backup
    Click on Multimedia File Manager and click on the other Multimedia files tab
    Sort by filename by clicking the Filename tab
    Find MediaDomain/Library/SMS/Attachments and highlight all of them, then press delete.  You can also click to export to a folder of your choice, if you want to save them that is. 
    Then go to System Files>MediaDomain>Library>SMS>Attachments
    They will be all listed here, highlight them all and press delete
    Then just restore that backup using iTunes! 
    Tadaa! Space recovered, your messages are still there but without the attachments! 
    P.S You may want to make two backups in case you get any of the above steps wrong, but it is simple to follow the above and not do anything wrong!

  • Is there any way to prevent the OS from querying the Superdrive when start

    Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

    Is there any way to prevent the OS from querying the Superdrive when start
    No
    he OS queries the drive slot to see if there is a disc present.
    How can you tell? Based on the noise it makes?

  • Is there any way to get my photos FROM my iPod Touch back onto a new hard drive?

    My Mac crashed last Friday. First timeIs there any way to get my photos FROM my iPod Touch back into my new hard drive. The iTunes sync only goes one way from the computer to the iPod.
    It syncs the photos taken with the iPod (really an old iPhone 3G without phone service) but not the folders which I synced from the old hard drive to the iPod over the past year.

    thank you for the tip.
    Yes, my computer was backed up. for reasons way too complicated to go into here, these particular folders were not part of the backup.
    Thanks again for the help.
    jglaiche

  • Several years ago, I downloaded a lot of music to my iPod (5th generation) from my computer. I have since replaced the computer and I no longer have my music on the new computer. Is there any way of recovering my music from my iPod to my computer.

    Several years ago, I downloaded much music to my iPod (5th gen). I have since replaced my computer and iTunes no longer lists my music. I there any way to upload my music from my iPod to iTunes on my computer?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Is there any way to delete songs directly from my iPhone without using iTunes?

    I'm trying to delete music directly from an iPhone 4 in iTunes on the device rather than using my laptop to delete and then sync it. Is there any way to delete music completely from my phone without using my latop?

    I tried this, firstly de-clicked the title in iTunes and syned with my iPhone4 but the title is still there on the phone. so deleted the title from iTunes and re-syned but alas the title is still there.
    any ideas?

Maybe you are looking for