Is there any command for Windows 2008 that is similar to Get-GPOReport for Windows 2008R2?

I'm trying to export the GPO into an xml file for a network that we only have 2008 servers for, but I have tried the Get-GPOReport in power shell on another network, and I'm trying to obtain the same information. Is there a similar command? Thanks

Hi baskervi,
Based on my knowledge, the Windows Powershell command-line can be running on Windows Server 2008 R2. However, please note:
The command-line can be running on Windows Server 2008 R2 on a domain controller.
The command-line can be running on Windows Server 2008 R2 on a member server that has the GPMC installed.
You must use the import-module grouppolicy command to import the Group Policy module before you use the Group Policy cmdlets.
For more information, please refer to the following articles:
Group Policy Cmdlets in Windows PowerShell
Dude, where’s my GPO? Using PowerShell to find all of your Group Policy links.
In addition, it would be helpful if you could help to collect the following information:
What did you mean by another network?
Did you got any error message when you run GPOReport in powershell on Windows Server 2008 R2?
Regards,
Lany Zhang

Similar Messages

Is there any command in Reports 6i - which is similar to raise form_trigger

Is there any command in Reports 6i - which is similar to raise form_trigger_failure in forms6i.

This might be helpful,
You must raise the exception from within your PL/SQL.
SRW.PROGRAM_ABORT examples
/* Suppose you want to put a border around the salary if it is greater
than 0.
** Suppose, also, that if the report fetches a salary less than 0, you
want to
** raise a customized error message (i.e., "FOUND A NEGATIVE SALARY. .
** then terminate the report execution. To do so, you could write the
** following format trigger for F_SAL.
FUNCTION foo return boolean is
BEGIN
if :sal >= 0 then
srw.attr.mask := SRW.BORDERWIDTH_ATTR;
srw.attr.borderwidth := 1;
srw.set_attr (0, srw.attr);
else
srw.message(100, 'FOUND A NEGATIVE SALARY.
CHECK THE EMP TABLE.');
raise srw.program_abort;
end if;
RETURN (TRUE);
END;

Is there any command line option, so that when I open firefox from command line it uses the already opened firefox, instead of creating a new firefox window.

for example: this option is available with jedit editor.
jedit
above cmd always opens a new jedit instance.
jedit -reuseview
above cmd checks if there is a existing jedit instance if yes brings it to focus else opens up a new one.

Start your '''Computer''' in safe mode with networking. Then start Firefox.
After a bit, close it. Then open it a few minutes later.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''

Is there ANY form of PhotoShop software that I can buy/download onto my Windows Vista Home Premium computer?

I am well aware adobe does not usually support Vista. However, I need PhotoShop to continue my work off campus while on an internship. I honestly don't care if it's CC or elements, but I need some program that lets me edit photos. I don't want to jump the gun though and buy some CD or download software that ends up not compatible. I apologize if this is an odd request. If someone asks me why I still have Vista, the answer is basically this:
1) This is a 5-6 year old computer and that's the program it came with at the time (and that I'm used to)
2) As a university student, my biggest fear of switching over to Windows 7 or 8 is that they are not "user friendly" as some people have put (again, student here so the LAST thing I want is to not be able to find all my documents again...my Dad is currently having this problem with Windows 8)
3) I'm not too keen on upgrading to Windows 7 or 8 UNLESS it's a last resort AND I don't have to copy everything on my computer onto a hard-drive and then move it back over after upgrading (I'm not that tech savy so I'm afraid I will mess something up)
I apologize again if this sounds strange or anxious of me, but I really would like to continue helping the faculty at my school buy working on this project (they're already dealing with issues of setting up the MAC there to work with the new website). Any help would be appreciated. Thank you.

If you don't mind Photoshop Elements, here are Adobe's Vista notes.
Photoshop Elements compatibility with Windows Vista
Photoshop CS6 is the current product, and here are the notes on Vista support.
Adobe CS6 Complete System Requirements for All Products on PC and Mac | ProDesignTools
Gene

Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?

TimesTen Release 11.2.1.9.6 (64 bit Linux/x86_64)
Command> dssize;
PERM_ALLOCATED_SIZE:      51200000
PERM_IN_USE_SIZE: 45996153
PERM_IN_USE_HIGH_WATER:   50033464
TEMP_ALLOCATED_SIZE:      2457600
TEMP_IN_USE_SIZE:         19680
TEMP_IN_USE_HIGH_WATER:   26760
Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?
tried to use ttsize function, but it gives some senseless results – for example, for the biggest table, tokens, it produces following output (that this table is 90GB in size – what physically cannot be true):
Command> call ttsize('tokens',null,null);
< 90885669274.0000 >
1 row found.

Are you able to use the command line version of ttSize instead? This splits out how much space is being used by indexes (in the Temp section of the TT memory segment), which I think is being combined into one, whole figure in the procedure version of ttSize you're using. For example:
ttSize -tbl ia my_ttdb
Rows = 4
Total in-line row bytes = 17524
Total = 17524
Command> create index i1 on ia(a);
ttSize -tbl ia my_ttdb;
Rows = 4
Total in-line row bytes = 17524
Indexes:
Range index JSPALMER.I1 adds 5618 bytes
Total index bytes = 5618
Total = 23142
Command> call ttsize ('ia',,);
< 23142.0000000000 >
1 row found.
In 11.2.2 we added the procedure ttComputeTabSizes which populates system tables with detailed table size data, and was designed to be an alternative to ttSize. Unfortunately it still doesn't calculate index usage though, and it isn't in 11.2.1.

My Laptop crashed. I had a full backup on Carbonite so the iTunes folder is there and downloadable. Is there any way just to import that and have iTunes on my new computer (Windows 7) recognize it?

My Laptop crashed. I had a full backup on Carbonite so the iTunes folder is there and downloadable. Is there any way just to import that and have iTunes on my new computer (Windows 7) recognize it?

Nothing gets imported. Simply restore the ENTIRE iTunes folder to the new/restored computer.
Download and install iTunes from Apple's website.
The first time iTunes is launched, assuming the ENTIRE iTunes folder is restored to the correct location, it will launch and be exactly as it was prior to the comptuer issues. If for some reason this does not work, close iTunes, hold the SHIFT key while launching iTunes and a prompt will appear to choose or create a new iTunes library. At this point simply point iTunes to the correct location for the existing iTunes library.

Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

Got the "apple firewire ntsc" choice to show up even if grayed out and "missing" under "audio/visual" menus by recreating choices in Easy Setup under "final cut pro" MENU thank GOODNESS because I was reading horror stories on here about this under another thread with someone trashing preferences, reinstalling and the works and still not getting it to show up...on my search now for an analog/digital converter up at b&h...find it odd that the s video connector wouldn't show the crt monitor when I put both displays through the 3870...I switched it back to see if it worked again when only the one dell monitor display was there and there it is again mirroring the screen display on my desktop...just can't be seen as an "external monitor" in fcp...couldn't find anything specific in the shane ross threads to this. I'm sad the program doesn't just see the s video connection though the 3870 though my computer does fine and will query up at b&h in regard to what might be affordable as far as a digital/analog converter. It's also weird in itself that when I put the two dell monitors on the one card my computer no longer could see the s video crt connection...makes no sense. Will report in later as to what I discover up at b&h as I'm sure there's a world of people out there using this sony crt monitor still even into the upgrades with computers and software so I imagine therein lies the solution. Thanks again and I'll report in as to what hardware might be suggested for me.

My Old macbook pro that i bought in 2009. I have broke my screen and havent used it for a while, and now i have found out that i can use a monitor , but i have forgot my password is there any way i can make a new password? Thank you for reading this.

My Old macbook pro that i bought in 2009. I have broke my screen and havent used it for a while, and now i have found out that i can use a monitor , but i have forgot my password is there any way i can make a new password? Thank you for reading this.

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

Is there any way to an index that can be used to include the "OR condition "?

Hello I have some questions.
The test was conducted in the following procedure .
create table test
c1 varchar2(10),
c2 varchar2(10),
primary key(c1)
create index test_idx1 on test(c2);
Command> explain select * from test where c1 = 'AAAAAAAAAA' or c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   <NULL>
NOT INDEXED:         TEST.C2 = 'AAAAAAAAAA' OR TEST.C1 = 'AAAAAAAAAA'
Command>
Command> explain select * from test where c1 = 'AAAAAAAAAA' and c2 = 'AAAAAAAAAA'
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   TEST.C1 = 'AAAAAAAAAA'
NOT INDEXED:         TEST.C2 = 'AAAAAAAAAA'
Command>
By including the "OR condition " in this test does not use the index.
Is there any way to an index that can be used to include the "OR condition "?
Thanks.
GooGyum.

A database cannot in general use indexes in this way for an 'or' involving two different columns. However, for this specific example one can easily rewrite the query using 'UNION' to use the relevant indexes while still giving the same (correct) result:
Command> explain select * from test t1 where t1.c1 = 'AAAAAAAAAA' union select * from test t2 where t2.c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   T1.C1 = 'AAAAAAAAAA'
NOT INDEXED:         <NULL>
STEP:                2
LEVEL:               2
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST_IDX2
INDEXED CONDITION:   T2.C2 = 'AAAAAAAAAA'
NOT INDEXED:         <NULL>
STEP:                3
LEVEL:               1
OPERATION:           OrderBy
TBLNAME:             <NULL>
IXNAME:              <NULL>
INDEXED CONDITION:   <NULL>
NOT INDEXED:         <NULL>
STEP:                4
LEVEL:               2
OPERATION:           UnionMergeSort
TBLNAME:             <NULL>
IXNAME:              <NULL>
INDEXED CONDITION:   <NULL>
NOT INDEXED:         <NULL>
Maybe you can apply a similar trick? If you know there is no possibility of duplicate rows then you can further optimise this (in terms of performance) by using UNION ALL.
Chris

Are there any command can list all container and XML doc which in DB

When I use BDB XML shell,
are there any command can list all container or xml document which in database,
maybe like command dir(in windows), can list all exist directory and file.
Thank very much.
Henry Wang

Hi Henry,
When I use BDB XML shell,
are there any command can list all container or xml
document which in database,
maybe like command dir(in windows), can list all
exist directory and file.If you type "help" in the dbxml shell you'll get a list of all the commands available. As you will observe, you can use the "getDocuments" command to retrieve all the documents within a container. You will have to open the container first.
If you want to list all the files within a directory you'll need to simply use the command prompt's "dir" (naming all your containers within a directory in the <container_name.dbxml> would allow you get the list by running a "dir *.dbxml" command).
Not sure that this is what you really want, but if you would like to keep track of all the containers within a directory, or other directories, you can use a container with a special role, that of a catalogue, to hold the list of all created containers on disk, and eventually other specific information.
Regards,
Andrei

Is there any script or batch program that can pick a xml file...

Hi,
Is there any script or batch program that can pick a .xml file from a folder and place it in a different folder on the same directory periodically without using an XI interface.
Thanks,
np

Hi Nadini,
Please refer below link for how to sechdule a batch file.
[Schedule Batch File-How to?|http://www.tech-archive.net/Archive/WinXP/microsoft.public.windowsxp.general/2006-04/msg01349.html]
And please refer below links for how to write a batch file and other one as batch file commands.
http://www.wikihow.com/Write-a-Batch-File
http://www.aumha.org/a/batches.php
these two links was a click away in google :).
regards
Aashish Sinha

Can i charge my MacBook Pro during the airplane time because battery's life is 3 hours only? so is there any cable or something like that? Thanks in advance

Greetings
i have a question regarding my MacBook Pro laptop regarding charging it during the airplane time because in fact my battery's life is 3-4 hours, no more,
so is there any cable or something like that to recharge on the plane? if not, please till me advices to save power for long life battery?
Kind regargs
Thanks in advance
Kerollus Abdelnour

To keep track of the battery charge and condition go to Apple Menu/System Preferences/EnergySaver and check the show battery status in menu bar.

Is there any command in SQL or in form6i to view the role of current user?

Hi Friends,
Is there any command in SQL or in form6i to view the role of current user?
Please reply me on urgently basis.
Shahzad

select * from SYS.dba_role_privs where grantee=<USERNAME>
Ensure that you have select privs on above system view.
Cheers........ Bob

Is there any way to retrieve photos that were put in the trash can and then it was emptied? Or is there a way to move photos from an imovie to iphoto?

Is there any way to retrieve photos that were put in the trash can and then it was emptied? Or is there a way to move photos from an imovie to iphoto?

If you've emptied the trash, ehtn no. However if you have a backup, like Time Machine, or a recent backup copy of your photo library you could recover the photos from the trash.
The answer to getting a snapshot form iMovie depends on what version you have.
I should add it technically may be possible to recover the emptied trash, but if you really want to do that you would need to download a utility software that can attempt to recover deleted files. Do it soon before you start writing more data to that disk. At the moment I don't have a recommendation for such a program. Maybe someone else out there will offer suggestion.

Is there any command to see dfc memory on SUP32?

Is there any command to see dfc memory on SUP32?

I don't know if the Sup32's support dfc's or not or if it's only the 720's . To see this on the 720's you would have to log into the individual DFC cards by using the "attach slot#" command and then do a show version , this shows how much memory is on the indivdual cards . There is also a lot of other things you can look at in there , they have their own individual logs etc.... There is a a whole "show" command set just for the dfc's .

Is there any command for Windows 2008 that is similar to Get-GPOReport for Windows 2008R2?

Similar Messages

Maybe you are looking for