Is there any function to hendle message against user ?
is there any function to hendle messages by user ?
i need function that show messages ( error ) by user list .
just user in list will pass , other will get error message .
thanks .
i will explaine
i have made transction "YMIGO" and no user allowed to inter to "MIGO"
now we have problem in MIGO and we want to allow to OSS user come in
to the sys. and see the problem , i can fix/change the code for this case
but i ask if there any standart solution for this case ?
Similar Messages
-
Is there any function modules or BAPI's
Is there any function modules or BAPI's that would delete the original partner and then add a new partner.Iam using BAP
bapi_alm_notif_data_modify
But iam not able to change partner in notification header
Please give your input for sovling itDear Rama,
In the bapi_alm_notif_data_modify, there are 2 structure
NOTIFPARTNR STRUCTURE BAPI2080_NOTPARTNRI OPTIONAL
NOTIFPARTNR_X STRUCTURE BAPI2080_NOTPARTNRI_X OPTIONAL
Pass yr partner value in NOTIFPARTNR, and against the value make it "X" in the NOTIFPARTNR_X , then u can change the partner value.
Give point if helpfull
Thanks -
Is there any function module? Fiscal week no problem
Hi friends,
I want how to get physical week for given date.
Ie for 01-04-2009 week no is 1.
Is there any function module?
Pls suggest
Regards
MoosaHi,
Use the below code.
DATA: v_ersda TYPE sy-datum VALUE '20090618'.
DATA: v_month(2) TYPE c,
v_week(2) TYPE c,
v_full_week LIKE scal-week.
MOVE v_ersda+4(2) TO v_month.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
date = v_ersda
IMPORTING
week = v_full_week
EXCEPTIONS
date_invalid = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MOVE v_full_week+4(2) TO v_week.
WRITE:/5 'Month = ', v_month.
WRITE:/5 'Week = ', v_week.
Regards,
Kumar Bandanadham -
Is there any function that....
Hello friends
I wrote a ABAP program to print the PL (Part List). But while printing it jst takes 25 lines in the ckt refence else it don't print it. This is becoz of the reason that while printing it takes 1st ckt refence then 20 blank spaces then next ckt and so on. and it prints maximum of 500 characters. So if we have more than 25 lines we face problem. Is there any function that bypasses these 20 blank spaces and only consider the ckt refences. Plz help me in this. If possible sent me the code for it.
Thnx
RakhiThe table all_objects (and/or dba_objects) contains a column called last_ddl_time. Thus, a query like
scott@jcave > SELECT max(last_ddl_time)
2 FROM all_objects
3 WHERE owner = 'SCOTT';
MAX(LAST_DDL_TI
28-NOV-03will tell you the last time any object owned by SCOTT had DDL issued against it.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC -
Is there any function to upload
Hi,
Is there any function to upload a txt file in background into itab?
Thanks.
deniz.hi,
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:\FILEINTERFACE\file.TXT'
* FILETYPE = 'ASC'
has_field_separator = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
data_tab = t_kna1
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
Thanks
Sharath -
Is there any Function module available for GR IR for purchase order
Hi
Is there any function module available in SAP to get the list of Goods Received and Invoice Reciept for a purchase order.
One way to create a custom fuction to fetch the details from MSEG and BKPF.
Can somebody suggest a better solution.
Thanks in advance.
Ruhi HiraWhich table in BAPI_PO_GETDETAILS exactly has these information ?
PO_HEADER_TEXTS
PO_ITEMS
PO_ITEM_ACCOUNT_ASSIGNMENT
PO_ITEM_SCHEDULES
PO_ITEM_CONFIRMATIONS
PO_ITEM_TEXTS
PO_ITEM_HISTORY
PO_ITEM_HISTORY_TOTALS
PO_ITEM_LIMITS
PO_ITEM_CONTRACT_LIMITS
PO_ITEM_SERVICES
PO_ITEM_SRV_ACCASS_VALUES
RETURN
PO_SERVICES_TEXTS
EXTENSIONOUT
NFMETALLITMS
Regards
Ruhi Hira -
Is there any functionality for AVERAGE in ALV, like do_sum, subtot?
Hi Experts,
In my_alv report, am doing sub/totals for prices, by using do_sum, subtot functions.........fine. But, I need to do/display the AVERAGE value for Discount % column?
Is there any functionality for AVERAGE in ALV, like do_sum, subtot?
thanqhi
check these links out
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
regards
vijay
reward points if helpful -
How can we get the image which is stored in clipboard by labview, i can get the text in clipboard by using invoke node directly.but i cannot get the image, is there any functions or vi available.(image is in Png format)
The Read from Clipboard method is, unfortunately, limited to text. If the clipboard contains an image then you need to use OS-specific functions calls. This is an example program for Windows. It's old, but it should still work.
-
Is there any function to automatically adjust the voice volume in the multitrack
I'm trying to mix voice sounds and music files into one track. Sounds easy! But almost every music has its loud parts(for example the climax) and quiet parts. Therefore when i listen to the voice and the music at the same time, the voice files are sometimes relatively too quiet and sometimes to loud. I don want to adjust the volume pan one part after another because I have a lot of files to mix. Could you tell me is there any function I can use to automatically adjust the voice volume to make it always 'just a bit higher than the music'? Or can I read some documents about this problem?
Thank you very much!Sounds like you want to do what is called "ducking" & "side chaining".
First try using a compressor and or limiter on the voice tracks to get a more even volume.
Google: Audio Ducking tons of stuff on how to.
I myself have never tried this with Audition, or the compressors that come with it. I have done it in other multitrack software and older versions of Dave Browns Compressor.
Duff -
Is there any function module for getting distribution list name
Hi all,
Is there any function module for getting distribution list name when there is same description for two distribution list name.
or
help me how to fetch the correct distribution name when there is same description.
In order to send mails.
Tell me ASAP.
thanks
sagar.http://www.sapbrainsonline.com/REFERENCES/FunctionModules/SAP_function_modules_list.html
list of Fms -
Is there any function module to get the variables used in a query?
Hi experts
Please, do you know if is there any function module to get the variables used in a query?
Thanks and regards
LuisHi Srini
Yes, I have checked the tables but I need a function module
Thanks anyway!
Luis -
Is there any function module to give absolute value of a number?
Hi,
Is there any function module to give absolute value of a number?
That has similar functionality to the Built in Function ABS.
Please let me know.
Thanks,
cshi,
why are you looking for any function module.
You can easily get it by mathematical function ABS .
Syntax : <Turget Variable> = ABS <Source Variable>
\[removed by moderator\]
Anirban Bhattacharjee
Edited by: Jan Stallkamp on Jun 27, 2008 4:19 PM -
Is there any function module to convert the date format
Dear ABAPers,
Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
Thanks & Regards,
Ashok.hi,
create custom function module or copy the below code in the report ..and use it
the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
""Local interface:
*" IMPORTING
*" VALUE(DATE) LIKE SY-DATUM
*" EXPORTING
*" VALUE(FORMATTED_DATE)
*" EXCEPTIONS
*" INVALID_DATE
TABLES: TTDTG.
DATA: BEGIN OF T_DATE,
YYYY(4) TYPE C,
MM(2) TYPE C,
DD(2) TYPE C,
END OF T_DATE.
DATA: DAY(3) TYPE N.
DATA: VARNAME LIKE TTDTG-VARNAME.
IF DATE IS INITIAL.
CLEAR FORMATTED_DATE.
EXIT.
ENDIF.
check document date format
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
DATE = DATE
EXCEPTIONS
PLAUSIBILITY_CHECK_FAILED = 1.
IF SY-SUBRC NE 0.
RAISE INVALID_DATE.
ENDIF.
MOVE DATE TO T_DATE.
CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
WRITE T_DATE-DD TO DAY.
CONCATENATE DAY ',' INTO DAY.
CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
SEPARATED BY SPACE.
ENDFUNCTION.
the output is :--Convert a DATE field into a full format date eg. March 23, 2000
Regards,
Prabhudas -
Is there any function module to convert date format?
Is there any function module to convert date format from mm/dd/yyyy to dd.mm.yyyy or sy-datum?
Hi,
wirte statement converts any date fomat in system date fromat
WRITE w_DateTO w_date_sys.
Regards,
Sriram -
Is there any function to change the width of forms'graphic ?
Hi All,
Is there any function to change the width of forms'graphic ?
May be like set***property.
Thanks,
ke xiongNo. Graphics cannot be handled at runtime.
Francois
Maybe you are looking for
-
L'il Help Please! Text changes color half way up some characters in PDF created from PSD files
Hi there, I have been asked to refresh the layout of an existing document that utilizes Zapfino font. The font is yellow with a black stroke at 50% opacity and also with a drop shadow. The group of text with the inconsistent color is immediately unde
-
2nd generation time capsule: how to limit access to wireless network at night?
I am using a 2nd generation time capsule and need to limit access to my wireless network at night, is there a setting to do this? I don't want to physically have to shut down my time capsule/router every night but I need a way to turn off the wirele
-
I have been looking up countless forums for the past two weeks trying to figure out what is wrong with itunes. I have uninstalled and reinstalled itunes countless times, I have downloaded firmware, rarr stuff, updated everything on my laptop, I have
-
In which tables, fax number is saved after PO creation
Hi, In creation of PO using different methods, when the PO is saved , in which tables this fax number from the screen of ME21N is being saved? Its not being saved in LFA1 as we cannot change standard vendor data. Please suggest me the tables in whi
-
My iTunes 11.2.3 won't open
I have reloaded, also I have done the reset PRAM, and still the new iTunes won't open. Why?