Is there any OOTB audit report functionality in OAM?

I configure audit policy and audits log to files.
I'm wondering is there any built-in audit report functionality in oam without crystal report or any other outside report tools?

OAM has very limited Audit functionality when it comes to comply the industry standards. It all depends on what exactly you are trying to Audit.
- If you are looking for OAM Components Diagnostics - Refer to Access System - System Management - Diagnostics
- If you are looking to track the access reports of users - Refer to Access System - System Management - Manage Reports. You can create custom reports in this section to track who accessed what and when?
- If you are looking to track the system statistics like number of AU/AZ, LDAP calls, SLA's, Health Monitoring - You can use Oracle Enterprise Manager - Identity Management Pack
http://www.oracle.com/technology/products/oem/prod_focus/idm_mgmt.html
- If you need to track down the changes of what users changed on their profiles and password failures, Group History, Identity/User History, you can go for BI Publisher Reports for OAM. Oracle provides OOTB report templates for most of the reports in OAM. Refer to the Zip file on OAM Home Page
http://www.oracle.com/technology/products/id_mgmt/coreid_acc/index.html
Again, it all depends on your requirement to judge what will be feasible to achieve the desired audit.
Hope this helps !

Similar Messages

  • Is there any command in Reports 6i - which is similar to raise form_trigger

    Is there any command in Reports 6i - which is similar to raise form_trigger_failure in forms6i.

    This might be helpful,
    You must raise the exception from within your PL/SQL.
    SRW.PROGRAM_ABORT examples
    /* Suppose you want to put a border around the salary if it is greater
    than 0.
    ** Suppose, also, that if the report fetches a salary less than 0, you
    want to
    ** raise a customized error message (i.e., "FOUND A NEGATIVE SALARY. .
    ** then terminate the report execution. To do so, you could write the
    ** following format trigger for F_SAL.
    FUNCTION foo return boolean is
    BEGIN
    if :sal >= 0 then
    srw.attr.mask := SRW.BORDERWIDTH_ATTR;
    srw.attr.borderwidth := 1;
    srw.set_attr (0, srw.attr);
    else
    srw.message(100, 'FOUND A NEGATIVE SALARY.
    CHECK THE EMP TABLE.');
    raise srw.program_abort;
    end if;
    RETURN (TRUE);
    END;

  • Is there any standard SAP report to see all active,inactive, retiree employ

    SAP experts
    Is there any standard SAP report where I can look all the employees whose employment specific status is 0 (terminated), 1(employee with the company but inactive), 2(retiree), 3(active).
    please help
    regards
    renu

    Hi Experts,
    I had a similar requirement and I used S_PH9_46000223 Report for my need as suggested.
    I observed one thing.
    "If I give Selection Date as "Today" then the entry date column is 00.00.0000"
    Can anyone clarify my doubt? it is happening in same way for other similar standard reports as well.
    Doubts
    1) Why this is happening
    2) Is it happening as it should? Whats the reason
    3) is there any functional/technical way to correct or modify
    Regards

  • Is there any TCODE or Report Program or way to display the enterprise struc

    Hi,
    Is there any TCODE or Report Program or way to display the enterprise strucdture in a pictorial view.
    I want to see like:
    Financial Accounting
          Company
           Business Area
           Functional Area
           FM Area
            Segment
           Profit Center.
    I will appreciate your help.
    Thanks
    Bashir Awan

    Did u checked thse reports
    S_AHR_61016499 - Job Description
    S_AHR_61016501 - Complete Job Description
    S_AHR_61016498 - Job Index
    S_AHR_61016497 - Existing Jobs

  • Is there any table or report that available in SAP for any PR/STR

    HI All,
    Is there any table or report that available in SAP for any PR/STR that are remain opened after S/O canceled.
    Please advice at the earliest.
    Thanks
    Chandru

    Chandru,
    Of course.  The standard MD06 transaction will display ALL MRP generated exception messages, and will take you to the individual material to allow you to determine how you wish to respond to it.
    So, MD06>enter the plant.  Optionally, enter the controller if you wish to limit the results by planner.
    If you are interested in Sales order cancellations, then these exceptions would be categorized by SAP as belonging to the  "exceptions during Scheduling" or "exceptions during availability" groups.  On the Exceptions group tab, select these two items (6&7), deselect the rest. Enter.
    You are now presented with a list of all materials that contain one or more of these exceptions.  From the menu bar at the top, select Edit>Find.  If you get a 'statistics' popup, click through.  Select the 'Find Exceptions' tab.
    Message 26 "excess stock in individual segment" means that in a MTO environment, you have more supply than demand against given order/items (as you would have if a cust. cancelled his MTO order).  Select this message.
    Message 20 "Cancel Process" means that you have a supply element that has NO requirements (as you would have if a cust. cancelled his MTS order).  Select this messaege.
    Message 15 " Postpone process" means that you have supply elements that are scheduled to be received earlier that necessary (as you might have if a Cust cancelled his MTS order). Optionally select this message.
    Clik the green check.  You will now notice that certain rows on the listing are highlighted.  These are the ones that contain your problem children.  Hit the "glasses selected MRP list" button.
    This takes you to the first MD05 of the highlighted items.  Review the problem.  Decide what to do:  Cancel a supply element?  Push out a supply element? Leave it alone?  Call customer service to discuss which order was cancelled and why?  etc etc etc...
    Once you are done with the first material, clik on the 'next material' icon or hit Ctrl-F2.  Repeat.  Continue till all materials have been evaluated and resolved.
    This works for any other MRP message as well.
    Regards,
    DB49

  • Is there any table or report  to see basic price  billing doc wise in mass

    Dear  experts,
                  is there any table or report  to see basic price  billing doc wise, in mass, please help
    regards
    rajakarthik

    Hi
    If your basic price is same as Net price then you can check it in table VBRK.
    If Basic Price is not same as Net Price then from the table VBRK you will have to take the value of KNUMV and then with respect to this KNUMV go to table KONV and take the value of KWERT.
    To check the value in mass you may make a report with the help of ABAP or by your own using SQVI transaction.
    Regards
    Amitesh Anand

  • Is there any standard Atrition Report Available

    Hi Experts,
    Is there any standard Atrition Report Available.
    Regards,
    IFF

    Hi,
    Std report has EE entry and left and Staff changes. If these helps for ur req use it else create a new report for attrition. Mostly std report will not covers the orgn attrition report..
    http://help.sap.com/saphelp_47x200/helpdata/en/48/35d4ad4abf11d18a0f0000e816ae6e/frameset.htm

  • Is there ANY way to report firmware bugs to nokia ...

    Nokia released firmware 51.018 for E52 6 months ago.This broke N-Gage and games which were paid for can not be activted.The problem is not corrected in later updates.
    Firmware v52,v53,v54.Nokia Care centers tell me its Network problem.I have tested 5 E52s and it is a firmware problem.Mailing to ASK nokia does not reult in bug getting known to programmers either.They lecture me about correct settings.
    Some body please tell me if  there ANY way to report firmware bugs to nokia programmers
    Solved!
    Go to Solution.

    do you think there will be a new firmware update for e52?
    E52 - Product code 0585050
    UK.
    V54.003

  • Is there any seeded graphical report available in OPM quality module.

    Dear All,
    I have two queries in OPM quality module.
    1.Is there any seeded graphical report available in OPM quality module?
    2.Is there anything like Collection plans of collecting multiple elements and doing an analysis based on the Collected elements in OPM quality?
    We need to map these two requirements for a OPM customer.
    please send your comments.
    Thanks
    Suresh

    Dear Aditya
    To my knowledge, there is no such report and need to go for Customization. Hopefully what you asked is simple report which is possible to customize.
    Regards
    Raj

  • I have photos in a DVD. In order to visualize them in iPhoto, must I necessarily import them? Can't I see the pictures from the media without importing? If not, is there any application with this functionality? I dont't like pre-visualization for photos.

    I have photos in a DVD. In order to visualize them in iPhoto, must I necessarily import them? Can't I see the pictures from the media without importing? If not, is there any application with this functionality? I need an app that allows me to navigate through the photos without selecting all of them. I realy dont't like pre-visualization for photos...

    In order to visualize them in iPhoto, must I necessarily import them?
    iPhoto is a Database. Before it can work with any data it must be imported to the database, so yes it is necessry to import them.
    Can't I see the pictures from the media without importing?
    See above.
    If not, is there any application with this functionality?
    Hundreds. Any image viewer will do the job. On your Mac the Finder has QuickLook and there is the Preview app as well. Online you can download any of these:
    http://www.macupdate.com/find/mac/image%20viewer

  • What is Site Definition and is there any OOTB Site Definition ?How to Create Custom Site Defination?

    Hi All,
    What is Site Definition and is there any OOTB Site Definition ?
    How to Create Custom Site Defination?
    Thanks in advance!

    Hello,
    Please check following links for detailed explanation : 
    http://msdn.microsoft.com/en-us/library/aa978512(v=office.14).aspx
    http://msdn.microsoft.com/en-us/library/ee231583.aspx
    Regards, Shruti

  • Is there any delivered BAPI or Functional modules available for MCHB table

    Hi Experts,
    I have a requirement where I have to pull inventory data from MCHB table without custom code. Is there any delivered BAPI or Functional modules available for MCHB table?
    Kindly help!
    Thanks
    Gopal

    Hi,
    Can you check using the Fun Modules
    MG_BATCH_CHECK_STOCK
    VB_READ_BATCH_WITHOUT_STOCK
    VB_BATCH_GET_ALL_STOCKS
    Regards,
    Anji

  • Is there any standard REconciliation report in SAP for Bank

    Hi All,
    Is there any standard REconciliation report in SAP for Bank....?
    Thanks in advance
    Regards
    Amit Mistry

    Hi Ashok ,
    This report RFEBKA00 imports account statements into the SAP System and
    then creates batch input sessions for updating in G/L accounting and *
    in the subsidiary ledger. It does not print any report - as far as I can see.
    Cheers
    Kartik

  • Is there any Oracle 9i reports developer certification?

    Hello,
    I am wondering is there any Oracle 9i reports developer certification to upgrade my certification, just like oracle 9i forms developer certified professional..
    i know there is oracle 9i forms developer certified professional but not finding the reports???
    will anyone help me out please since my employer wants to know is there any such thing?
    Thanks a lot..

    user617801 wrote:
    Hi,
    Did anyone wrote the certification, .... Probable someone wrote the exam associated with the certification
    how are the Questions?Dunno
    Does anyone have sample Questions?AFIAK no.
    >
    Thanks.See: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=442 and downward links.

  • Is there any way to report Non Trade Material/ Consumable Item in Intrastat

    Hi Experts,
    Is there any way to report a non trade material for which we do not have a material master, in our intrastat report.
    During Purchase order creation we will enter Account assignment as K and in the text enter teh description of material.
    Can somebody help.
    My opinion is that it should have a material number to have a commodity code.
    Rgds
    Arpit

    I think that there is no way to do that.
    You can create a parallel branch of the dimension (in the same generation) which includes those entities that only have data (members tagged as Shared Members).
    Sorry for my basic english.
    Regards,
    Gustavo.

Maybe you are looking for