Is there any SAP tool to run reports on different report server versions

Hi,
I have to run crystal reports on different report server versions. This is a repetition of the tasks as it requires installation of report servers and executing reports on both. Is there any SAP reporting tool which simplifies all these tasks , runs the report at the same time on different report servers and gives output for both executions?
Thanks.

Hi,
I have to run a single CR report on different versions of CR report server for validating if the report runs correctly.
So can be it done like a scheduler which then generates report result files.
Thanks.

Similar Messages

Are there any SAP delivered screens in infotypes for different countries

HI,
I am looking if they have any SAP delivered interfaces for diiferent infotypes. e.g. diffrent screen for MExico or Brazil for IT 0002. Please let me know,
Thanks,
Rashmi

Dear Rashmi,
In IMG (SPRO) under
Personal Management -> Personal Administration -> Customizing Procedures -> Infotypes -> Assign infotypes to countries
If the Country-Dependent Subtypes indicator is set for the infotype in view T777D Infotypes - Dialog/Database Assignment, you can also specify the permissibility of Subtypes for country infotypes.
At the moment, this indicator can only be used for infotypes whose subtypes are defined in the Subtype Characteristics view (V_T591A).
Examples:
Itype Itype text   Type Descript.   Cntgrp   Descript.    Status
0006 Addresses    J2 Guarantor      22       Japan       permitted
0012 Tax Data D    * all subtypes    01      Germany      permitted
There is no entry for the Personal Data infotype (0002). This means the infotype is permitted for all country groupings.
In the Addresses infotype (0006), the subtype Guarantor (J2) is only allowed for Japan. All other subtypes are permitted for all country groupings.
The Tax Data D (0012) infotype is only permitted for country grouping Germany. Other countries cannot access this infotype.
Regards,
Naveen.

Is there any SAP standard HUM report

Hi Guys
Is there any SAP standard HUM report
which can have the fields like Contents of HU field and HU identification2 field
Please help
Thanks in advance

HI
Run T code HUMO

Is there any upragde tools for SAP B1 to SAP ERP?

Hi,
I know, SAP B1 and SAP ERP are totally different SAP products.
In my mind, maybe we should implement the new SAP ERP, and then, migrate the old master data from B1 to ERP...
So, is there any upragde tools or procedure (or data migration tools)for the project of upgrade SAP B1 to SAP ERP?
Is there any documentation for this?
Many thanks in advance.
BR,
Randy

It is not listed on the official roadmaps
Lumira:
https://websmp206.sap-ag.de/~sapidb/011000358700000212382013E.pdf
Analysis Office:
https://websmp206.sap-ag.de/~sapidb/011000358700000395262012D.pdf
For Lumira we asked at BI 2014 the other week and they said they were working on it.
You can register for this ASUG Analysis Office Roadmap and ask SAP on the webcast about it:
May 12: Analysis Office Roadmap
Same for Lumira - see these upcoming ASUG webcasts - especially Q&A:
May 15: Lumira Self Service for Business User
May 21: SAP Lumira Question and Answer Session

Is there any SAP substitute role to create expense report for executives?

Hello,
In an organization there are executives like MD, CEO and they need to submit their expenses. This activity is basically needs to be done by their secretary (substitute). So is there any SAP provided roles to do this activity?
I have seen SAP_FI_TV_WEB_ASSISTANT used for My Employees/POWL. Apart from this role do we have any other way for executives?
Appreciate your help.
Thanks,
Chandra.

Hi ,
You can create travel request from PR05 from ECC or if you have ESS and you want administrators to create on behalf of others provide the below role and you can create from My Employees or you can customize a role specific for administrators using structural authorizations.
SAP_FI_TV_WEB_ASSISTANT
Hope this helps,
Regards,
S.Srikanth
Edited by: SrikanthS on May 10, 2011 6:32 AM

Is there any way to use RUN button to deploy the application and open IE...

Hi
Thank you for reading my post
i used to use Run button to compile / deploy and run (opening the browser to project context path) .
i want to know is there any way to use RUN button to deploy an application to standalone OC4J and opening browser?
I know that we can define ear or war deployment profiles and use them to deploy the application to stand alone server , but i want a single click solution.
thanks

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
Thanks
Jacky

Hi,
If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
Regards
Ray Farmer
Regards
Ray Farmer

Is there any way to stop running apps from showing in dock

Is there any way to stop running applications from showing in the dock

MacUpdate.com for OnyX or TinkerTool, one of those has the ability to lock the Dock so no changes occur, basically giving you what you want.

Is there any transaction code for uploding logo in ALV reports.

is there any transaction code for uploding logo in ALV reports.

hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
            i_logo             = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?

Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?
I found one such tool "Fortify" in the below link. Are there any such kind of tools available which supports SharePoint?
Reference: http://www.securityresearch.at/en/development/fortify/
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

Hi Amalaraja Fernando,
I'm not sure that there is one more tool that combines all these features. But you may take a look at these solutions:
SharePoint diagnostic manager
SharePoint enterprise manager
What is SPCop SharePoint Code Analysis?
Dmitry
Lightning Tools Check
out our SharePoint tools and web parts |
Lightning Tools Blog | Мой Блог

Is there any Deploy Tool

Hi Friends,
Is there any deploy Tool in Weblogic 6.1 similar to one that comes in J2sdkee
Server from sun. If yes how to get it in Weblogic
I have got a demo copy of WL6.1
Thanks
Manoj

"Manoj" <[email protected]> schrieb im Newsbeitrag
news:3da6a465$[email protected]..
>
Hi Friends,
Is there any deploy Tool in Weblogic 6.1 similar to one that comes inJ2sdkee
Server from sun. If yes how to get it in Weblogic
I have got a demo copy of WL6.1
Thanks
Manojyou may deploy your application in the admin console or with the "built-in"
admin command from weblogic.
alexander

Is there any Recommended Tools by Oracle for doing Penetration Testing

Is there any Recommended Tools by Oracle for doing Penetration Testing in Oracle CRM On Demand (Single Tenant Environment.)

HI,
as far as I know Oracle not encouraged customers to perform this kind of tests.

HT3131 Are there any ventilation issues with running a macbook air in clamshell mode?

Are there any ventilation issues with running a macbook air in clamshell mode?

...that makes sense to me.
but, why do so many MBA users (on this forum and others) claim that ventilation occurs through the keyboard? Is this claim based on an old macbook design?
for example, here's a related discussion (although fairly old):
11-08-2010, 12:16 PM
#6 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by tHE j0KER
Actually I you shouldn't close the lid while running on an external screen. The keyboard of the Macbook is an air intake for the fan. Close the lid, and it could overheat.
A common misconception of unknown origin. The intake and the exhaust for the cooling fan on the 13" MB and MBP are both located on the rear slot at the base of the hinge. In fact, you can actually see the divider that separates the intake flow from the output flow. If it were through the keyboard crevices, then an awful lot of overheats would result from people using impermeable keyboard covers, as well as Apple's warranty department would be flipping out over the Apple store carrying such covers. iSkin ProTouch FX Keyboard Cover for all MacBooks - Black Printed Keys on White - Apple Store (U.S.)
Does one think that Apple sells these only for use when the Notebook is off??? http://store.apple.com/us/product/TW...co=MTM3OTUwMDE Closing the lid, whilst operating the unit actually results in cooler operation due to reduction in power consumed by operating the display, which in supporting the on-board display generates heat far greater than simply powering the video port..
Does one think that Apple sells these for use only when the MacBook is off? http://store.apple.com/us/product/TW...co=MTM3OTUwMDEApples direction for use is specifically for when using with an external display.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion
11-08-2010, 02:34 PM
#7 (permalink)
ajreynol
Notebook Virtuoso
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,542
Rep Power: 18
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
once again, I've tried a few of these keyboard covers. the Moshi keyboard cover is the ONLY one I can recommend. the others are too thick or change the keyboard experience too much.
17" Apple MacBook Pro | i7 2720m | 160GB SSD + 750GB | 16GB | HD 6750M 1GB
Dell 435MT | i7 920 | 10GB RAM | 7.64TB HDDs | HD 6970 | Win7+SL
HP Elitebook 2710p Tablet PC | 1.8GHz C2D | 4GB RAM | 160GB HDD | X3100
Apple iPhone 4 32GB | Apple iPad 64GB (Gen 3)
Stop random laptop wakeup | 5K500.B bench data | How to Disable PowerMiser
Disable Vaio beep when pressing volume or special keys
11-08-2010, 03:34 PM
#8 (permalink)
doh123
Without ME its just AWESO
Join Date: Feb 2009
Posts: 3,282
Rep Power: 22
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
2. The thing you plug into the wall is not a battery charger. The actual "charger" is built into the computer. It knows when to charge and when not to. If the little light on the power plug is amber, then its charging your battery. When its green, its just powering the laptop and NOT charging your battery at all.
Mac OS X Gamer/Porter
(We do exist!)
Wineskin 2.5 is available!. Turn Windows apps into Mac apps for free!
11-08-2010, 03:38 PM
#9 (permalink)
Wolfpup
Notebook Virtuoso
Join Date: Jun 2007
Posts: 3,871
Rep Power: 28
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
I'd leave the lid open, at least partially...yes it may be fine not doing that, but you are making heat dissipate worse, of course could even theoretically hurt the screen.
As for the battery...well there's really only two choices, have it plugged in or not. As others mentioned, you can't overcharge the battery. It can be damaged a bit from heat, but of course the number one thing that's going to damage it is discharging it...so it's a no brainer-use it plugged in whenever possible, and try to charge it whenever possible when it's not plugged in.
11-08-2010, 03:45 PM
#10 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by doh123
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
Nope. Apple would disagree with you on that one. Any "closure", which is, when compared to the amount of CFM, is insignificant. In fact, the opening size remains the same. it is only deflected at a slight angle when the lid is closed. Tilt your MBP and see. As well, shutting down the display lowers the heat being generated, even in the lower case. As I said, if it were a problem, Apple would not be selling stands designed to operate your unit in the closed position as the original poster of this thread proposes to do.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion

My mbp with 10.8.2 is randomly freezing. Is there any test i can run?

My mbp with 10.8.2 is randomly freezing. Is there any test i can run? Software and hardware,?

Step by Step to fix your Mac

How do you test any SAP objects before a transport to the production server

How do you test any SAP objects before a transport to the production server?

Hi Rama Krishna,
The actual process is develop the object in development system and unit test there with the available data.
Then move it to Quality server where the data will be the actual replica of production and where the integration testing and ened to end testing happens and also the user acceptance testing happens there.
and once everything is found fine there then it is moved to production system.
Award points if this is helpful.
Regards,
Ravi G

Is there any SAP tool to run reports on different report server versions

Similar Messages

Maybe you are looking for