Is there any userexit/badi/bapi to react miro on enter ?
hello
i tryed to find exit to check company code in miro ,
i tryed badi INVOICE_UPDATE not working , oss buttom line
Note 392342 "'MRM_BADI_INVOICE_CHECK'. Contact the remote consulting for this"
userexit LMR1M001 to LMR1M006 and MRMH0001 to MRMN0001
not helping , in save event some of tham stop but
cant send error message and stop the process.
what i am doing wrong ?
i need to display error message in wrong company code
in check/enter or in the worst case in save process.
thanks.
Hi,
Check the following FM exits
EXIT_SAPLMRMP_010 - Customer Exit: Analyze Document Header and Item Data
EXIT_SAPLMR1M_004 - Change the Withholding Tax- and Split Table
Thanks,
Naren
Similar Messages
-
Is there any FM or BAPI to get list of all sales orders
Hello all,
I have the requirement like below.
Is there any FM if i Pass Drawing document no, type,part,revision level which gives
the output list as.
1) all sales orders, where the above drawing document no is attached to the materials
and these materials are used as one of the lower level components in the Sales order BOM,
I need to show all those sales orders along with SO number,item,Material,Plant and BOM Item no,
2)all sales orders, where the above drawing document no is attached to the materials
and the same material is one of the item in sales order.
3)all sales orders, where the above drawing document no is used as one of the component in Sales order BOm's
Addition of 1,2,3 will be the o/p.
are there any FM or BAPI to get the above list.
Basically the above report is concatenation of report outputs of t-code CSD5 and CS15.
Awaiting reply.
Thanks.Hi venkatesh,
You can use the BAPI
BAPISDORDER_GETDETAILEDLIST
to get list of all sales orders.
Here is a lik which provides you BAPI'S regarding everything.
[http://www.saptechies.com/sap-bapi-list/]
Hope this will help you.
Regards,
Pavan. -
Is there any fuction or bapi that can print the report automatic?
Dear All
I want to print the report( generated by command write ) automatic.
Is there any function or bapi that can do it?
Thank you in advance.Hi,
Please try this.
report ztest_auto_print.
DATA:L_PARAMS TYPE PRI_PARAMS,
L_VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
IMMEDIATELY = 'X'
LINE_SIZE = 220
RELEASE = 'X'
MODE = 'CURRENT'
NO_DIALOG = 'X'
IMPORTING
* OUT_ARCHIVE_PARAMETERS =
OUT_PARAMETERS = L_PARAMS
VALID = L_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
"But it will take default printer from user settings
NEW-PAGE PRINT ON PARAMETERS L_PARAMS NO DIALOG.
write : 'print is on'.
NEW-PAGE PRINT OFF.
Regards,
Ferry Lianto -
Is there any userexit for MIR7 and MIRO transaction?
Hai friends,
Is there any userexit for MIR7 and MIRO transaction at the time of pressing "save as completed" or "save" button. I want to check the sales certificate and invoice verification for the document number entered in MIR7 and MIRO.
Regards,
safiq
NOTE:useful points will be rewarded.hi,
these r the exits related to mir7.
Transaction Code - MIR7 Park Invoice
Enhancement/ Business Add-in Description
Enhancement
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE Business Add-In: Logistics Invoice Verification
put a break point in each exit,like break username and test the transaction . -
Is there any Fm or Bapi available to see the direct reportees of a manager
Is there any Fm or Bapi available to see the direct reportees of a manager
i have the managers id could i get the employees under that manager
is there any SAp fm for the sameLike Aditya, I have not seen such a function module. However, there is a standard evaluation path which may be suitable for your purpose. It is called BOSSORG and will give you all the employees under a manager.
Use it with function module RH_GET_STRUCTURE or RH_STRUC_GET. The latter lets you specify parameters directly, while the former takes them in container form. None of them are released for customer use unfortunately, but I haven't found a corresponding function module that is released. -
Is there any FM or BAPI to capture the action in CRMD_ORDER?
Hi All,
In CRMD_ORDER transaction, I need to know the action selected by the user like CREATE TRANSPORT OF COPIES, LOGON TO SYSTEM etc. Is there any FM or BAPI available to capture this action details?
Thanks in advance.BAPI_SALESORDER_CHANGE
[Link|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bapi_salesorder_change-delete-sales-order-ver-470-1081398] -
Any Userexit & BADI for transaction VB(7 during final settlement
Hi SAP GURUS,
I have checked no user exit and BADI. Any Userexit & BADI for transaction VB(7 during final settlement. During final settlement of rebate, I have to change the amount from KONP table in transaction VB(7 . Let me know the userexit and BADI.
Regards,
Karthik.Hi Sekhar,
These following BADI are not capturing KONP item details.
I want to capture KONP item details to modify amount.
ARC_SD_COND_CHECK : Archiving Object SD_COND: Additional Checks
ARC_SD_COND_WRITE : Archiving Object SD_COND: Archive Additional Data
SD_COND_SAVE_A : Save condition application A, E
Regards,
Karthik. -
Is there any FM or BAPI to delete the sales orders
Hi,
Is there any FM or BAPI to delete the sales orders
Thanks,
srinivas.BAPI_SALESORDER_CHANGE
[Link|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bapi_salesorder_change-delete-sales-order-ver-470-1081398] -
Is there any way i can use app store without entering a credit card # because i don't have one
Click here and follow the instructions.
(87861) -
Is there any way to create fields reports users can enter data into?
I am using Crystal XI to develop reports for my company and have not received any formal training on it. I'm learning it fairly well through the help files.
One of the reports I need to create summarizes our scrap, rework, and additional incurred expenses for our monthly quality reports. Most of the information is stored in the main program used by all employees, a very small amount of it is not. I have created sub-reports for each of the different types of costs that are tracked in the system.
Is there any way to create an area on the report that our QA people can use to enter the items not tracked in the main system? I am imagining that it would be through another sub-report of some kind, but do not know how to create the fields needed.
Thank you very much for any assistance you can provide, even if it is to tell me "You can't do that, ma'am..." At least then I would know and wouldn't beat my head against the desk trying to figure out how to do it.Is defining parameter prompts in the Crystal Report and displaying it in the report a possible workaround?
If you define parameter prompts, then Crystal will query the user before running the report - so this would be problematic if the user needs to reference data in the report to enter appropriate values (one possibility then is to use interactive parameters feature available in CR 2008).
Sincerely,
Ted Ueda -
Is there any userexit OR BADI for MIR7 WHEN change number of PO
I know I can use badi NVOICE_UPDATE- CHANGE_BEFORE_UPDATE method. to check PO's number when
I save .
I want to find an exit or badi to implement when I change number of PO, and type enter to check the number .How can I do ??Hi,
Please check this thread for the procedure to find the BADI for a transaction
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1276392,00.html#
Or
You goto se24 and specify the class CL_EXITHANDLER and in that double click on GET_INSTANCE method in that put a break point on the line
CALL METHOD cl_exithandler=>get_class_name_by_interface
and run you transaction... for almost every action you will get this method trigger and in that check the exit name... And that's the BADI for the interaction made in that transactation.
Please go through this link for Finding BADI using class CL_EXITHANDLER in detail.
[Finding BADI|http://abapreports.blogspot.com/2008/06/badi-finding-in-abap.html]
Hope this would help you.
Good luck
Narin
Edited by: Narin Nandivada on Aug 19, 2008 5:30 PM -
Is there any std. BAPI to check both user name and password exist or not
Hi frnds,
I am looking for a std. bapi to check both username and password exist or not..
i found one bapi bapi_user_existence_check. but it checks only username...I don't think that you will have access to the passwords that are stored in the system.
If so, you could read every user's password and logon to the system.
I guess that they're encrypted and stored on the database.
Why do you need to check for the password. Isn't the username sufficient? -
Userexit/BAdi in BP replication process in R/3?
Hi All,
Is there any userexit/Badi is available in R/3 for BP replication process for CRM to R/3? It would be much appreciated if you provide the same.
Thanks,
NarsaiahHi All,
Thanks for your response, after my investigation I found that there is no issue in CRM o/b BDocs, issue is only when populating the BP in R/3. To populate this it's using BDC call transaction there it's not populating the Name1 and Name2 fields of BP(Customer) in XD01. And its using BAPI PI_BP_PROXY_BAPI_CUSTOMER in R/3 side to process i/b data. I'm not sure why its not populating in call transaction. It's using DEBITOR_BDCDATA to get BDC data with this FM I'm bit confused, as its not picking any screen fields for Name1, Name2 and Address. However its updating address not Name1 and Name2. Could you please someone advise on this? It would be greatly appreciated.
Thanks in advance.
Narsaiah -
Is any Userexit or BAdi or enhanc. point while create PO with reference .
Hello Experts,
Is there any Userexit or BAdI or Enhancement point while create P.O with reference .
My requirement is while creating the P.O.(ME21N) with reference, The payment terms is getting copied from the reference P.O. and become grayed out (Non editable) instead of that user want the payment terms which we have maintained in (LFB1) Vendor Master.
Please help me to resolve my problem.
Edited by: Ketanp on Mar 7, 2012 11:48 AMHi
Try with badi ME_PROCESS_PO_CUST
Regards
Eduardo -
Is there any BAPI or FM to authorization object to user in ABAP program??
Hi guys.
My requirment is to assign authorization object to user in ABAP program,is there any FM OR Bapi to do this?Hai ,
In order to do the authority check in the program , in your report at selection-screen event you need to check for the corresponding authority output .
example :
T SELECTION-SCREEN ON p_carrid.
IF p_carrid IS INITIAL.
MESSAGE 'Please enter a value' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT 'S_CARRID'
ID 'CARRID' FIELD p_carrid
ID 'ACTVT' FIELD '03'.
Regards,
K.VinayKumar
Maybe you are looking for
-
How can I display summary for every 15 minutes using DATE datatype
This is probably an easy question, but the answer eludes me... I am trying to write a SQL report that displays aggregate totals for every 15 minute period. I know you can do something like this to get every minute: select to_char(import_date,'MM-DD-Y
-
My screen is green on wake up iphone 5
Hi. I have only had the phone for a week and now on wake up, for a few seconds, the screen has a strange green tint down each side. It has not been dropped or got wet. Any suggestions???
-
Issue: iCal I can't sync the iCal in my new MacBook Air with the existing iCal in my iPad. I went to system preferences (settings) to iCloud and checked the iCal to enable it to sync to my existing iPad iCal. Still nothing happened. It's strange beca
-
Nikon D90 footage: Can you edit natively in Final Cut?
Just wondering if anyone has been using the new Nikon D90 to shoot video, and then importing the footage natively into FCP6. The camera's video-recording format, from what I have read, is 720p24, an .avi file, and a Motion JPEG codec. I see that in t
-
Hi, We have a requirement that, depends on the Ship-to-party region basevalue and taxes should be determined. While i am creating the condition table, i gone through the field catalogue to find the ship-to-party region, but there is shipt-to-party