Is there any way to prevent misbehaving solved by refreshing the browser?

When I play my published Captivate 6 file in the browser (in this case Google Chrome), it sometimes gets "stuck" --- rollovers don't work properly or buttons don't show up when they are supposed to. Sometimes I get the audio echo problem where audio from some previous slide plays on a future slide). None of these things happen during previews.
If I refresh the browser and then continue where I left off, the problems are gone.
What is causing this awful behavior? I am afraid I am disappointing my client, which I never want to do and have never done in the past! We will have to publish instructions telling people that if anything goes wrong, they should just refresh their browsers. But some may not know how to do that, some may not read the instructions, etc. etc. causing support calls to my client and general dissatisfaction with the training.
Is this just a shoddy product or did I not do something I need to do to get it to behave itself?
Please advise! Thank you,
Ellen

hmm the a64 is locked so you cannot use a cpu multipier to have only cpu go faster..
i oc with the fsb....but noticed that i may actually be over running my power, at high oc's(233) if i unplug at least 3 hard drives, and some fans it will run microsofts memmory tester...but not with them in.
you may be able to oc if you drop your mem speed down in bios to 333 or 200.
so when you oc the memm will clib from there...i have seen good results from that.
one person was able to catch my 232 results from dropping down to 200 mem speeds.

Similar Messages

Is ther any way to prevent implicit data typing in the block scriptd

System build /autocode implicitly define the type of variables that are not defined by the user in a block scripts based on the value assigned to them.
As an example, if there is no type definition for the variable A in a block script, depending which of the following lines appears first in the block script the type of variable will be defined differently in the autocoded model:
A = 1; -> RT_INTEGER A;
A = 1.0;-> RT_FLOAT A;
This behavior can cause undesirable result in certain situations.
Is there any way to flag the variables in the block scripts with no type definition during analyze / autocode? or alternatively, disable the implicit type definition such that any variable without explicit type definition in the block scripts will result to an error during analyze / autocode.
Thanks

Hi Farshid,
It is the default behavior to pick up the type from the first assignment. However one can explicitly type variables as seen in the BlockScript user guide page 2-7. For instance, one can declare
Inputs: U;
Outputs: Y;
Parameters: (UBrk, YBrk);
Float U, Y(;
Float UBrk(, YBrk(Y.size,;
This forces all the parameters and local variables to Float.
Let me know if this helps, there is not a way to turn off implicit typing, just a way to explicitly type.
Richard
Richard
Field Sales Engineer, New Jersey
National Instruments

Is there any way of storing audio- / video-elements in the browser cache in Safari in iOS?

Hi there,
I'm desperatly trying to find a solution for a web application that has to run on an iOS-Safari (e.g. on iPad, iPad2 and iPhone 4):
It's a web-application I wrote some time ago which lets the user search for and listen to short music samples (MP3s, all from ~100 kB to ~1.5 MB). The audio player is Flash-based, so it doesn't work on iOS-devices at the moment and I'll have to implement an alternative either in HTML 5 or with a "direct" QuickTime-object.
Both my HTML 5- and QuickTime-alternatives for iOS-devices work fine so far, but there's one major problem I can't find a solution to:
Unlike Flash and most HTML 5-capable browsers on Windows Safari on my iPad 2 won't store the audiofiles in the browsercache after loading and playing them - neither with HTML 5 audio-tags nor with a QuickTime-Object. Every time I load an audio file for playback from the server (with JavaScript-Commands, so without changing or reloading the whole page) it's downloaded again completely.
If a user listens to sample A and then to sample B, Safari forgot about having played sample A and downloads the whole MP3 again if I like to listen to it again. On a mobile device with a potentially narrow bandwith this behaviour is out of the question.
Is there a way of storing downloaded audiofiles opened by HTML 5 or QuickTime in Safari's cache so it remembers already having downloaded them - like it caches usual "web-files" like HTML, CSS or JPEG-images, or like Flash stores such objects in its local cache?
The Application Cache with a manifest-file is not an option - this only seems to work if the browser is offline, for example if the iOS-device is in "Airplane"-Mode.

Yes, I watched it. It contains interesting stuff I have to admit I didn't know yet, but unfortunately I still can't find a solution to my problem:
My first attempt was trying to use the Application Cache with a manifest file - although this is not really the intended purpose for my application... I don't have a static set of files that I want to have cached or "available offline" - I just want to cache MP3s which the user has played yet.
It should be possible to use a "dynamic manifest": One that is parsed by the Apache PHP module and listing the files played so far from a PHP session - something like this:
<?php
session_start();
header("Content-Type: text/cache-manifest, charset=UTF-8");
echo "CACHE MANIFEST\n";
foreach($_SESSION['playedSongs'] as $song)
    echo $song."\n";
?>
So whenever a song is loaded / played, I could access the PHP session with AJAX, insert the filename of the played file and manually update the manifest by calling window.applicationCache.update().
There are two problems with this:
First of all: It doesn't work. And I didn't even get to the point of trying to use a dynamic manifest:
<!DOCTYPE html>
<html manifest="cache.manifest">
    <head>
        <title>Test</title>
        <script type="text/javascript">
        function playStuff(id)
            if(id == 1)
                window.document.getElementById("audio").innerHTML = '<audio controls preload="automatic" autobuffer><source src="song01.mp3" type="audio/mp3" /></audio>';
            else if(id == 2)
                window.document.getElementById("audio").innerHTML = '<audio controls preload="automatic" autobuffer><source src="song02.mp3" type="audio/mp3" /></audio>';
        </script>
    </head>
    <body>
        <div id="audio"></div><br />
        <br />
        <input type="button" value="playStuff(1)" onclick="playStuff(1)" />
        <input type="button" value="playStuff(2)" onclick="playStuff(2)" />
    </body>
</html>
The cache.manifest looks like this:
CACHE MANIFEST
song01.mp3
song02.mp3
and is properly returned from Apache as "text/cache-manifest" by adding
AddType text/cache-manifest manifest
to the .htaccess of this directory.
The Apache-logs clearly show that the Safari (respectively "AppleCoreMedia") doesn't care about the application cache when it comes to audio-files:
Safari itself seems to acknowledge the manifest and indeed preload the files:
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/index2.html HTTP/1.1" 200 2619 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/cache.manifest HTTP/1.1" 200 79 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/cache.manifest?%3E HTTP/1.1" 200 79 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/song02.mp3 HTTP/1.1" 200 120525 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/song01.mp3 HTTP/1.1" 200 120525 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
Up to this point I did nothing but opening my test-application in Safari.
Playing song01.mp3:
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 2 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:29 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:29 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
Playing song2.mp3:
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 2 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:05 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:05 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
Playing song1.mp3 again:
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:40 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:40 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
Playing song2.mp3 again:
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:13 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:13 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
Every file is downloaded again completely when playing it. So "AppleCoreMedia" (whatever this may be exactly, the QuickTime-plugin that is triggered by the HTML 5 audio-element I suppose?) either doesn't have access to the Application Cache or simply just doesn't realize the files in it. So if I switch my iPad to "Airplane Mode" now, the Safari is unable to access / load / play the files.
I also tried using a QuickTime-object instead of an HTML 5 audio-tag (as far as I know HTML 5 audio and video in Safari always use QuickTime?) and controlling it with something like:
document.movie1.SetURL('song02.mp3');
Nothing changes, it's just like using HTML 5 audio and everything gets downloaded again when loading/playing it.
And even if this would work there'd still be a problem:
To properly implement that I would have to load the MP3-file in the Application Cache before playing it. When doing this it seems impossible to show a "real" progress: The ProgressEvent that is fired from the Application Cache after updating it doesn't seem to provide any information about data loaded so far and the complete size of a file. It's just "File 1 from 2" and so on, and not a "real" progress where I could determine something like: "100 kB of 1.2 MB loaded" as I can with the audio-element.
All the other storage-approaches like Web SQL / Web Database or Local Storage are no help either:
I don't see any way of getting the MP3 data into Local Storage or Web Database or getting it out again to play it. The HTML 5 Canvas-element has a toDataURL()-function to produce a Base64-encoded representation and use it for storage - the Audio-element doesn't seem to have anything like this.
My last really "dirty" approach was trying to load "manually" Base64-encoded-MP3s with a combination of AJAX and PHP: A PHP-script outputs a Base64-representation of a MP3-file and is loaded by AJAX, so I could store the Base64-representation e.g. as Local Storage or in Web Database:
<?php
$infile = 'song01.mp3';
$contents = file_get_contents($infile);
$base64 = base64_encode($contents);
$audio = 'data:audio/mp3;base64,'.$base64.'';
echo $audio;
?>
I tried using the resulting AJAX responseText as the source-argument in an audio-source-tag. Suprise: It doesn't work in Safari on my iPad 2, the player just fails to load the "file", although this works fine in Chrome on Windows. Possibly a size limitation for Base64-URIs on Safari / iOS.
And again: Even if this was working in iOS/Safari I don't know of a way to determine a real progress from an AJAX-query...
The last thing I could think of is not replacing the audio- or source-tags when loading a song but leaving them in the DOM-structure, check if it's already there when a song is loaded and just add a new audio-tag if a song hasn't been loaded yet.
This solution would be my last resort: I'd have to rewrite nearly the whole application to completely operate on JavaScript / AJAX to stay on one site in the browser - else the "cached" audio data would be lost again when changing to another site in Safari.
Furthermore I think there'll be a small cache limit somewhere when doing this?
Any ideas?

Is there any way to prevent flash from hanging up my browser

I am using
IE 8 and Widows 7 Player version 10
. The problem has been a problem with earlier versi
ons as well

When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

I'm trying to add a playlist manually to my iPhone 4. It won't let me because it's trying to delete all of the music currently on my iPhone. Is there any way to prevent this from happening in order to start manually updating it?

I'm trying to add a playlist manually to my iPhone 4. It won't let me because it's trying to delete all of the music currently on my iPhone. Is there any way to prevent this from happening in order to start manually updating it?

Are you leaving the box unchecked to Manually manage music & videos? You don't need to to add anything to the iPhone.
Simply drag the playlist to the iPhone to manually add it.

Is there any way to prevent this javascript icon/link on bookmarks?

Is there any way to prevent webvpn portal bookmarks from including this java-icon-link and thus preventing a user from using it's GO TO ADDRESS?
(WEBACL does not seem to prevent these Go To Address addresses...)

You can use the following APCF to disable the floating toolbar. The example below will apply to any URL but you can modify the wildcard to be a more specific value to suit your needs.
1.0
Disable WebVPN toolbar for all sites
http://www.cisco.com/en/US/customer/docs/security/asa/asa80/configuration/guide/webvpn.html#wp1046654
Todd

Is there any way to prevent or clean finger grease stains in your keyboard?

As all of you might know, the body releases toxins (including body grease) through our fingers, and i notice even though im a clean person and i clean my macbook often i get some stains in the keys i ust the most, that being the command key, spacebar plus the whole asdf jkl; line of th ekeyaboard, how can i get them off!?

Is there any way to prevent...grease stains in your keyboard?
wear gloves?
how can i get them off!?
Try a Mr. Clean Magic Eraser

Is there any way to prevent the copying of text from Presenter's Notes tab?

PowerPoint Notes Page text exposed on a Presenter Notes tab can be selected and copied from the Notes tab and then pasted into any text document. Is there any way to prevent the copying of text short of not providing notes text at all?

Hi Robingo,
Excel is strictly treated as a data source and Siena only imports the data in your tables, not the formatting.
If there is some business logic behind the formatting, you could mimic the same logic in Siena. For example, the font is bold or red if a value is in a certain range, the font is in italics if the data is for a specific customer, etc.
Thanks
Robin

In Mail, is there any way to prevent the ampersand 20 symbol in downloaded attachments?

Long title, but as it suggests, every time I download an attachment in Mail that has a space in the title, Mail puts in %20 to replace the space (ascii symbol for space). I'd like to prevent this and have attachments stored under the name they are sent. Any way to do this?

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

Is there any way to prevent opening the lid from waking my MBP?

Hi,
I have a problem with my screen on my MBP such that when the computer is asleep in its case the lid often comes ajar, wakes the computer, and drains the battery. Is there any way to prevent the lid opening from waking the computer?
Thanks for any ideas on how to fix this.

Option 3: Open Applications > Terminal and type sudo pmset lidwake 0 (you'll be prompted to enter your admin password). To revert to wake on lid open, use the Terminal command sudo pmset lidwake 1.

Is there any way to prevent excess rows from being added to a table on the front panel?

Whenever I programmatically add rows through a property node I can still go into the front panel and keep adding additional rows through the table. Is there any way to prevent this "excess scrolling"? Maybe grey out the rows or something?
At least I have chicken

Hello Labviewleroy,
You should be able to right click on the table on the front panel and select
Visible Items>>Horizontal Scrollbar or Vertical Scrollbar
You could also consider changing their visibility programmatically using a property node for the control or indicator that you are referencing. You can create the property node by right clicking on the control on the block diagram and selecting
Create>>Property Node>>Visible Items>>Horizontal Scrollbar or Vertical Scrollbar
Cheers,
-Joel
Motion PSE
National Instruments

Is there any way to prevent web.xml from any change ?

hi all,
we have a filter in web.xml. Now we want to prevent it from any change in future. I mean after making a war(EAR) no one can change the filter in web.xml. if he chaged it then he will not be able to re deploy the application.Right now it is in web.xml so one can easily change it and then he can redeploy the application.
Is there any way to prevent web.xml from any change after making EAR(WAR)?
One can easily make a change in web.xml and redeploy the application to get the result. Now we want to restrict the web.xml as java class for any change after making EAR(or WAR).
Could some one help me to do this?
thanks,
dinesh

I think you could use some third party software to lock the folder like FolderLock, just make sure others ppl cannot access your file should be fined.
This is my stupid solution only,cheers.

Is there any way to prevent web.xml from any change like java class?

hi all,
Is there any way to prevent web.xml from any change after making EAR(WAR)?
One can easily make a change in web.xml and redeploy the application to get the result. Now we want to restrict the web.xml as java class for any change after making EAR(or WAR).
Could some one help me to do this?
thanks,
dinesh

hi,
Not at development level. We want it after deploying the application on server .
We want to create it (web.xml) at tomcat startup (or in any other web/app server ) before loading any context.
Is there any way to run a simple java class(not servlet) on tomcat startup(before initializing the contexts)?
Message was edited by:
DP_java
Message was edited by:
DP_java

Is there any way to prevent Aperture from Auto Cropping an image?

Is there any way to prevent Aperture from auto cropping an image? I use the "Do Not Crop" aspect ratio often and Aperture constantly picks cropping aspects for me, which is driving me crazy. Can I set "Do Not Crop" as the ratio I want on a more permanent basis anyhow? Thanks for the help.
Chris

This is a current bug. Please report it via "Aperture→Send Aperture Feedback".
Just to clarify, the problem is not auto-cropping, the problem is the the crop tool aspect ratio is arbitrarily set (in my case, always to something close to the current crop aspect ratio). You can reset it (on a per-crop basis) to "Do not constrain".
It is very bothersome.
You might try trashing your prefs. Details on the Trouble-shooting page. I have had the bug return more than once.
Message was edited by: Kirby Krieger -- minor clarifications.

Is there any way to prevent misbehaving solved by refreshing the browser?

Similar Messages

Maybe you are looking for