Is there any way to share some of my iTunes accnt balance with my wife's iTunes accnt?

I would like share a portion of my iTunes account balance with my wife's iTunes account but don't know if that is possible. Can anyone out there assist?
Thanks,

Probably not, but if you want, you can click here and ask the iTunes Store staff if they'll do that for you.
(107512)

Similar Messages

  • Is there any way to run Siri on my iPad(iOS 6) with Local WiFi Network which requires a proxy sever and a port(8080) to connect to the internet?

    I create the WiFi network using the internet sharing option in my Macbook Pro from a local ethernet connection..and set the HTTP proxy settings in my new iPad.Siri runs like a charm on an other WiFi connection which doesnt require proxy but on my University connection it says that it cant handle any requests right now..

    We were having the same problem here at the School I work at.  By looking at some traffic logs and doing some internal testing, it appears Siri attempts to make a direct connection to the outside network using HTTPS (port 443), without using any of the proxy settings you may have configured on the Wifi network.
    We've reported it as a bug to Apple but haven't heard anything back yet.
    To get around it in the meantime you'll have to punch a hole in your firewall to allow Siri traffic through.
    Currently Siri appears to contact IP address 17.174.4.14 over port 443.  The IP address may change in the future, but that will at least get you up and going for now.  We went ahead and opened the entire 17.174.4.0/24 network, as the entire block of addressess is owned by Apple.
    Again, there is no gaurentee that this will not change in the future and break again.
    Good luck!

  • Is there any way to share my Mac's internet connection with my iPod as I can't turn on the wifi on my iPod?!

    When I restored and updated to IOS 6.1.3, my wifi on my iPod Touch 4th Gen greyed out and I can no longer use it.
    Is there any way to share the connection of my mac using the USB cable or Bluetooth?
    Thanks,
    James

    JamesUpjohn wrote:
    We have contacted Apple and haven't heard back for 3 months
    How did you try to contact them? In any case, an Apple Store is the best way to handle any problems with an iPhone when you have a store in your area. The Apple Store will certainly be able to handle the problem one way or another. Most likely they'll just replace the iPhone, though if you're out of warranty the replacement will not be free.
    Regards.

  • Is there any way to send some one a password protected pdf that only they can access/view with a password?

    Is there any way to send some one a password protected pdf that only they can access/view with a password?
    Thanks!

    Hi wonderingtoday,
    Yes, you can! If you have Acrobat, you can assign an "Open Password" to the PDF, so that only people who have that password can open the PDF. If you don't have Acrobat, you can try it for free for 30 days. For more information, see www.adobe.com/products/acrobat.html.
    Best,
    Sara

  • Is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?

    is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?

    Ziatron wrote:
    With Snow Leopard if you delete a file (put it the trash) and then do a secure delete it's gone.
    The OP is adressing SSD's in particular. Neither Snow Leopard nor Lion have the ability to secure erase an SSD of a single file by user action. This because SSD's write data in pages, but can only delete in blocks. Secure emptying of the trash on an SSD is no different than a non-secure erase, as the controller will not permit erasure of blocks until the entire block is freed, which is almost never the case with even group file deletion. Erasure is simply the re-writing of the "allocation table" that the pages are no longer in use.
    SSD's are only rendered "erased" of previous data after an indeterminate period of use, and re-use that would eventually free blocks for re-write, and then actually over-written.
    TRIM helps speed this process, but does not alleviate the block versus page issue.
    Some additional info.

  • Unfortunately I have deleted my entire itunes library and back up from my computer, is there any way I can copy my ipod nano back onto my computer into the itunes library? and re-download all the tunes I have purchased  from I tunes.

    Unfortunately I have deleted my entire itunes library and back up from my computer, is there any way I can copy my ipod nano back onto my computer into the itunes library? and re-download all the tunes I have purchased  from I tunes.

    Hello bigali,
    Your options are kinda limited. I would use this first:
    Downloading past purchases from the App Store, iBookstore, and ...
    Then check here for the non-purchased items:
    https://discussions.apple.com/thread/2452022
    You want to rebuild the library first, then sync the ipod.
    Here is a good idea for when your done:
    How to back up your media in iTunes
    Hope this helps.
    ~Julian

  • I have the iphone 4s and i received a video but its in slow motion now is there any way to convert the slow motion to regular speed with my 4s

    i have the iphone 4s and i received a video but its in slow motion now is there any way to convert the slow motion to regular speed with my 4s

    Only your service provider can unlock the phone. Check with the provided.

  • Is there Any way to sync what's on my ipod(playlists in particular) INTO my iTunes? Somehow most of my playlists disappeared after i did a software update.

    Is there Any way to sync what's on my ipod(playlists in particular) INTO my iTunes? Somehow most of my playlists disappeared after i did a software update.

    Use a program like YamiPod to export the playlists back into iTunes.
    B-rock

  • Is there any way to sync my lotus notes calendar and contacts with the calendar and contacts on my MacBook Pro?

    Is there any way to sync my lotus notes calendar and contacts with the calendar and contacts on my MacBook Pro?

    You would need to have enabled iCloud on your MBP. Your question indicated you did not.
    Its serial number is useful for establishing ownership should the MBP be recovered. File a police report.

  • Hi there. My iPod Nano was stolen from my car today. I do know the serial number of this stolen device. Is there any way that Apple can block another user from connecting this stolen device to iTunes?

    Hi there. My iPod Nano was stolen from my car today. I do know the serial number of this stolen device. Is there any way that Apple can block another user from connecting this stolen device to iTunes? Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?

    Is there any way that Apple can block another user from connecting this stolen device to iTunes?
    No.
    Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?
    No. Apple can do nothing to help. Sorry.
    Reporting a lost or stolen Apple product
    B-rock

  • Hi Apple, Is there a way to move some of my less frequently used music out of my iTunes Library to free up some space on my full hard drive but with the option to re-add it later?

    Hi Apple, Is there a way to move some of my less frequently used music out of my iTunes Library to free up some space on my full hard drive but with the option to re-add it later?

    Hi Apple, Is there a way to move some of my less frequently used music out of my iTunes Library to free up some space on my full hard drive but with the option to re-add it later?

  • Is there any way to reset security questions without a vocal contact with Apple?

    Yesterday I've tried to buy a song from iTunes, and it's surprised me that I've been ask to answer some security questions I have made long time ago and unfortunately I can't recall the answers of these security questions, I've tried to reset the security question by this site applied.apple.com and the reset link is not appearing under the answer box!!
    Is there any way to reset security questions without making a vocal contact with Apple ?
    Best Regards,

    Click here and ask. If they say that there isn’t, and they probably will, accept that.
    (122113)

  • Is there any way I can update my play count from my iPod to the same iTunes library on my computer that does not have any play counts?

    I recently transferred my data (music, apps, etc.) to a new computer via transferring purchases and Home Sharing and only a few songs had play counts. On my older computer, all the songs had at least some documentation of a playcount. Thinking that I could figure it out, I reset the play count for the songs on the new computer. Is there any way I could get the play counts onto the computer w/out them via iPod or Home Sharing. I look forward to hearing a reply. Thank you.

    HELPPP ME BEFORE CHRISTMASS MORNING!!

  • Is there any way I can download Adobe Photoshop CS6 trial version with my processor?

    Hi, I do need to work on something with photoshop. I downloaded Adobe Photoshop CS6 trial version, the installation was fine, but
    when I clicked on photoshop icon, a massage comes up, saying "You can't open the application Adobe Photoshop CS6, becase it is not supported on
    this type of Mac"
    I found information from here: http://www.adobe.com/au/products/photoshop/tech-specs.edu.html
    Photoshop CS6 requires multicore intel processor with 64-bit support,
    I guess mine isn't enough for this? I am using
    Mac OS X 10.6.8
    processor 1.83 GHz Intel Core Duo
    Memory 2 GB 667 MHZ DDR2 SDRAM
    I tried to download another versions but, 10.6.8 only goes with CS6.
    So is there any way I can get photoshop in this situation?? I really need to do something by using it!!!!

    Not the most helpful error message from the installer?  No details on why the system was rejected?  That's something I'd consider to be some amateur-level programming in the installer.
    You don't have a 64-bit processor.  Intel Core series is 32-bit.  Intel Core 2 series (and later) is 64-bit.
    Depending on what you're looking to do, try Acorn from Flying Meat?

  • Is there any way changing the priviledge after starting the managed server with the other user

    Hi,
    is there any way to change the user privilege after i have started the managed
    server with one user.....say for example ....i have started one of my Managed
    server as "root" ...but after that i wanted to make this instance work under as
    "inet"
    how do i do this OR is it possible ????
    please advise ....
    sangita

    Thanks again Rob.
    Rob Woollen <[email protected]> wrote:
    >
    >
    sangita wrote:
    Thanks Rob for been so quick in responding.
    I have 3 questions for you:
    Running a server under root is a huge security hole.My Question: 1) what are the probable security issues while runninga server under
    root ?
    are these security issues external(from outside world) or internal(internally
    within a company) ?
    Iam basically curious to know external threats.
    The problem is the root user can do anything. So if someone finds a
    security hole in your server, then they have complete control of your
    system.
    The usual reason people want to do this is so they can bind to a port
    <
    1024. ie they want their web server to listen to 80.My Question: 2) What is the harm in using port 80 for webserver andwhy do the
    people wanted to bind to a port < 1024 ?
    People normally use 80 for web servers because that's the well-known
    port.
    Personally I would not recommend that you go that route. I would
    recommend that you start the server as a very unprivileged user andbind
    it to some port (say 7001).
    Most firewalls support redirecting ports. Your firewall can redirect
    80
    on the external net to 7001 on the internal net. That's the solution
    I
    would recommend.My Question: 3) Suppose iam having a cluster of 2 Managed servers runningon port
    7070. And Iam having a Iplanet server working as a Webserver that basicallyproxies
    requests to this cluster. Then what is the best approach that i shouldfollow
    in this context.....to be honest with you ....i still couldnot understandwhat
    does "binding" the webserver port to a managed server in weblogic mean.
    I would have your firewall redirect 80 to whatever port Iplanet is
    listening on and then have iplanet proxy to WLS.
    Do not run your WLS servers as root.
    -- Rob
    Iam sorry for asking these "silly" questions(in your opinion) ...butiam a bit
    confused.
    thanks, sangita
    Rob Woollen <[email protected]> wrote:
    Running a server under root is a huge security hole.
    The usual reason people want to do this is so they can bind to a port
    <
    1024. ie they want their web server to listen to 80.
    There is a set uid option in WLS where you start the server as root
    and
    then after it binds to the low port, it will switch to another userthat
    you specify.
    Personally I would not recommend that you go that route. I would
    recommend that you start the server as a very unprivileged user andbind
    it to some port (say 7001).
    Most firewalls support redirecting ports. Your firewall can redirect
    80
    on the external net to 7001 on the internal net. That's the solution
    I
    would recommend.
    -- Rob
    sangita wrote:
    <Sure, it's possible to do this, >
    how to do this?
    <but why do you want to do it? >
    Iam not sure why this group (the other group than me) does start theirserver
    as "root"...but somebody from that group asked me about this today.
    I would not recommend that you start WLS as root on your production
    system ever under any cirucmstance.then what is the best approach and what are the pros and cons if westart the
    server as "root" OR as different user ????
    please advise ....
    thanks again.
    Rob Woollen <[email protected]> wrote:
    Sure, it's possible to do this, but why do you want to do it?
    I would not recommend that you start WLS as root on your production
    system ever under any cirucmstance.
    -- Rob
    sangita wrote:
    Hi,
    is there any way to change the user privilege after i have startedthe managed
    server with one user.....say for example ....i have started one
    of
    my Managed
    server as "root" ...but after that i wanted to make this instance
    work
    under as
    "inet"
    how do i do this OR is it possible ????
    please advise ....
    sangita

Maybe you are looking for