Is there C# example code for the NI 9485 SSR

Or how can I create my own code? I've looked at the dlls provided and they don't seem to cover this module.

As far as I know, you just use the digital I/O functions. A 1/true to turn the relay on and a 0/false to turn it off.

Similar Messages

Develop Example Code for the NI USB 8473

Hello,
I need to develop an application using the NI USB 8473 in VB2008 (OR VB2010).
Can you provide example code?

Hi jerisman,
Unfortunately examples for Visual Basic and CAN interface cards are few and far between. What I would recommend is looking at the example that I linked below for a starting point on reading CAN messages.
http://zone.ni.com/devzone/cda/epd/p/id/601
Also, you can go through previous forum posts about using NI-CAN with Visual Basic and pull information from what is discussed there.
http://forums.ni.com/t5/forums/searchpage/tab/message?location=Board%3A30&q=visual+basic+can#message...
Regards,
Peter W.

I want the example code for Calendar() and TimeZone() in java

Hi,
I want the example code for the TimeZone() and Calendar() class in java
because i new to java, i am not able to understand the concepts properly.
Thanks...

Hi Paolo Dema.
What are the exact spefications of your computer?
Also did you computer come with 10.6 ot 10.5?.
You may try entering the MPN (marketing part number) Format: M*****/**
The MPN can be found on the product packaging or the System Profiler.

Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

cymrieg,
Your code looks good to me. What is the problem? What happens when it fails? What is the IBSTA value on the controller, and at what point in the code does it stop? What is the IBSTA value on the slave, and at what point does it stop?
One thing is that you might not want to call IBCLR() in a loop on the device. At the beginning of the program is fine...This will send a clear command to the device and will clear out any LACS and TACS bits that might be set. Also your IBDEV call shouldn't be in a loop.
Hope this helps, but let me know if you need more information.
Scott B.
GPIB Software
National Instruments

Is there a reference document(example, code) for developing usb mini port driver?

Hi:
I studied Bus\USB document of WDK. This document forces on developing USB device driver.
And there are some IOCTL Interfaces of usb bus driver exposed to usb device, like IOCTL_INTERNAL_USB_SUBMIT_URB.
But those IOCTL Interfaces seem to belong to USB hub driver(usbhub.sys).
My job is to developing a usb mini port driver, like usbehci.sys. That can work with usbport.sys.
So I should know the communication interfaces(IOCTL...etc) between them and implement these interfaces.
Is there a reference document(example, code) for developing usb mini port driver ?

No there is no reference documents for this, Microsoft stated from the beginning that they own that layer. You really don't want to go there.
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

Is there any differnce between the Numeric Limit Test source code from TestStand 3.0 to TestStand 3.1? How to get the source code for the Numric Limit Test for both the versions?

I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
Jeyan

Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer

Trying to install Elements 13 and it asks for a serial number. The instructions say the number should start with 1057 but there is no code on the disks, box or envelopes the disks came in that start with 1057. I cannot activate the software without this c

Trying to install Elements 13 and it asks for a serial number. The instructions say the number should start with 1057 but there is no code on the disks, box or envelopes the disks came in that start with 1057. I cannot activate the software without this code and it is a Christmas gift to my wife. HELP!

I had this problem. There are actually two boxes. The outside one with the photos and stuff and glued into it is another box containing the disks. That box has the serial number. Adobe was NO help with this as if no one else ever could not find it. I had to rip open the outer box.

Hi when I try to connect some bluetooth devices I get asked for my pass code for the mac air . I never had 1 is there a default code

hi
when I try to connect some bluetooth devices I get asked for my pass code for the mac air .
I never had 1 is there a default code
thanks
rob

the shaker wrote:
is there a default code
no.

Provide the java code for the following scenario.

Hi Experts,
I have tried with all the combinations for this scenario. As per my understanding i require java code for the following scenario
so that it becomes easy........
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Kindly provide the java code.
Thanq very much in advance..

what i have understood from ur example is that u want to generate an idoc for unique combination of Order-no and Mat_No
if yes then chk the below mapping..
change the context of Order_No, Date, Mat_No and Quantity to Record (right click-> context)
1)
Order-no
----------------------concat[;]---sort----splitbyvalue(valuechanged)-----collapse context---IDoc
Mat_No
2)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context---UDF1--splitbyvalue(each value)--Delivery_Order_No
Mat_No
3)
Order-no
-----------concat[;]---sortbykey----------------------- \
Mat_No                       /                            \
Date--------------- /                                       \
----------------------------------------------------------FormatByExample-----collapsecontext---splitbyvalue(each value)----Recv_Date
Order-no                                                 /
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
4)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context-UDF2--splitbyvalue(each value)--Material_Num
Mat_No
5)
Order-no
-----------concat[;]---sortbykey
Mat_No                       /
Quantity --------------- /
----------------------------------------------------------FormatByExample-----SUM(under statistic)----Recv_Quantity
Order-no
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
UDF1:
String [] temp= a.split(";");
return temp[0];
UDF2:
String [] temp= a.split(";");
return temp[1];

Example codes for each and every class in API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Try this
http://www.javaalmanac.com/egs/
It's almost complete, but you could help mr. Patrick Chan to write more samples for the few classes left in the Java API...

Content Query Web Part (CQWP) displaying ASCII code for the colon portion of a time

I'm having an issue with a CQWP displaying : for the colon portion of a time. For example, instead of 6:30, the CQWP shows 6:30.
I checked our encoding which is set to UTF-8. We also have a custom style on the CQWP and I've made sure that our custom itemstyle.xsl file has the disable-output-escaping property set to yes.
When I look at the list I'm querying from, the ascii code is not showing in there; it's displaying properly as 6:30. I tried to flip this by replacing the colon with the ascii symbol in the list but it still showed the ascii code on the CQWP.
Any ideas?

Hi Cameron, thanks for your reply. The solution in the blog would work for an area that is only for date or time. Unfortunately, this particular section of my CQWP is more than just a time; it's the summary of a news article--
which may or may not contain a time depending on what the news article is about.
In further testing I have also noticed, when viewing the source code, that the colon is represented as
&#58; which tells me that the ampersand of the ascii code for the colon is also being convertied to ascii (in a sort-of double
conversion situation.) This isn't something I've ever seen before.

Example code for java compiler with a simple GUI

There is no question here (though discussion of the code is welcome).
/* Update 1 */
Now available as a stand alone or webstart app.! The STBC (see the web page*) has its own web page and has been improved to allow the user to browse to a tools.jar if one is not found on the runtime classpath, or in the JRE running the code.
* See [http://pscode.org/stbc/].
/* End: Update 1 */
This simple example of using the JavaCompiler made available in Java 1.6 might be of use to check that your SSCCE is actually what it claims to be!
If an SSCCE claims to display a runtime problem, it should compile cleanly when pasted into the text area above the Compile button. For a compilation problem, the code should show the same output errors seen in your own editor (at least until the last line of the output in the text area).
import java.awt.BorderLayout;
import java.awt.Font;
import java.awt.EventQueue;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JLabel;
import javax.swing.JTextArea;
import javax.swing.JTextField;
import javax.swing.JButton;
import javax.swing.SwingWorker;
import javax.swing.border.EmptyBorder;
import java.util.ArrayList;
import java.net.URI;
import java.io.ByteArrayOutputStream;
import java.io.OutputStreamWriter;
import javax.tools.ToolProvider;
import javax.tools.JavaCompiler;
import javax.tools.SimpleJavaFileObject;
/** A simple Java compiler with a GUI. Java 1.6+.
@author Andrew Thompson
@version 2008-06-13
public class GuiCompiler extends JPanel {
/** Instance of the compiler used for all compilations. */
JavaCompiler compiler;
/** The name of the public class. For 'HelloWorld.java',
this would be 'HelloWorld'. */
JTextField name;
/** The source code to be compiled. */
JTextArea sourceCode;
/** Errors and messages from the compiler. */
JTextArea output;
JButton compile;
static int pad = 5;
GuiCompiler() {
    super( new BorderLayout(pad,pad) );
    setBorder( new EmptyBorder(7,4,7,4) );
/** A worker to perform each compilation. Disables
the GUI input elements during the work. */
class SourceCompilation extends SwingWorker<String, Object> {
    @Override
    public String doInBackground() {
      return compileCode();
    @Override
    protected void done() {
      try {
        enableComponents(true);
      } catch (Exception ignore) {
/** Construct the GUI. */
public void initGui() {
    JPanel input = new JPanel( new BorderLayout(pad,pad) );
    Font outputFont = new Font("Monospaced",Font.PLAIN,12);
    sourceCode = new JTextArea("Paste code here..", 15, 60);
    sourceCode.setFont( outputFont );
    input.add( new JScrollPane( sourceCode ),
      BorderLayout.CENTER );
    sourceCode.select(0,sourceCode.getText().length());
    JPanel namePanel = new JPanel(new BorderLayout(pad,pad));
    name = new JTextField(15);
    name.setToolTipText("Name of the public class");
    namePanel.add( name, BorderLayout.CENTER );
    namePanel.add( new JLabel("Class name"), BorderLayout.WEST );
    input.add( namePanel, BorderLayout.NORTH );
    compile = new JButton( "Compile" );
    compile.addActionListener( new ActionListener() {
        public void actionPerformed(ActionEvent ae) {
          (new SourceCompilation()).execute();
    input.add( compile, BorderLayout.SOUTH );
    this.add( input, BorderLayout.CENTER );
    output = new JTextArea("", 5, 40);
    output.setFont( outputFont );
    output.setEditable(false);
    this.add( new JScrollPane( output ), BorderLayout.SOUTH );
/** Compile the code in the source input area. */
public String compileCode() {
    output.setText( "Compiling.." );
    enableComponents(false);
    String compResult = null;
    if (compiler==null) {
      compiler = ToolProvider.getSystemJavaCompiler();
    if ( compiler!=null ) {
      String code = sourceCode.getText();
      String sourceName = name.getText().trim();
      if ( sourceName.toLowerCase().endsWith(".java") ) {
        sourceName = sourceName.substring(
          0,sourceName.length()-5 );
      JavaSourceFromString javaString = new JavaSourceFromString(
        sourceName,
        code);
      ArrayList<JavaSourceFromString> al =
        new ArrayList<JavaSourceFromString>();
      al.add( javaString );
      ByteArrayOutputStream baos = new ByteArrayOutputStream();
      OutputStreamWriter osw = new OutputStreamWriter( baos );
      JavaCompiler.CompilationTask task = compiler.getTask(
        osw,
        null,
        null,
        null,
        null,
        al);
      boolean success = task.call();
      output.setText( baos.toString().replaceAll("\t", " ") );
      compResult = "Compiled without errors: " + success;
      output.append( compResult );
      output.setCaretPosition(0);
    } else {
      output.setText( "No compilation possible - sorry!" );
      JOptionPane.showMessageDialog(this,
        "No compiler is available to this runtime!",
        "Compiler not found",
        JOptionPane.ERROR_MESSAGE
      System.exit(-1);
    return compResult;
/** Set the main GUI input components enabled
according to the enable flag. */
public void enableComponents(boolean enable) {
    compile.setEnabled(enable);
    name.setEnabled(enable);
    sourceCode.setEnabled(enable);
public static void main(String[] args) throws Exception {
    Runnable r = new Runnable() {
      public void run() {
        JFrame f = new JFrame("SSCCE text based compiler");
        f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
        GuiCompiler compilerPane = new GuiCompiler();
        compilerPane.initGui();
        f.getContentPane().add(compilerPane);
        f.pack();
        f.setMinimumSize( f.getSize() );
        f.setLocationRelativeTo(null);
        f.setVisible(true);
    EventQueue.invokeLater(r);
* A file object used to represent source coming from a string.
* This example is from the JavaDocs for JavaCompiler.
class JavaSourceFromString extends SimpleJavaFileObject {
* The source code of this "file".
final String code;
* Constructs a new JavaSourceFromString.
* @param name the name of the compilation unit represented
    by this file object
* @param code the source code for the compilation unit
    represented by this file object
JavaSourceFromString(String name, String code) {
    super(URI.create(
      "string:///" +
      name.replace('.','/') +
      Kind.SOURCE.extension),
      Kind.SOURCE);
    this.code = code;
@Override
public CharSequence getCharContent(boolean ignoreEncodingErrors) {
    return code;
}Edit 1:
Added..
        f.setMinimumSize( f.getSize() );Edited by: AndrewThompson64 on Jun 13, 2008 12:24 PM
Edited by: AndrewThompson64 on Jun 23, 2008 5:54 AM

kevjava wrote: Some things that I think would be useful:
Suggestions reordered to suit my reply..
kevjava wrote: 2. Line numbering, and/or a line counter so you can see how much scrolling you're going to be imposing on the forum readers.
Good idea, and since the line count is only a handful of lines of code to implement, I took that option. See the [line count|http://pscode.org/stbc/help.html#linecount] section of the (new) [STBC Help|http://pscode.org/stbc/help.html] page for more details. (Insert plaintiff whining about the arbitrary limits set - here).
I considered adding line length checking, but the [Text Width Checker|http://pscode.org/twc/] ('sold separately') already has that covered, and I would prefer to keep this tool more specific to compilation, which leads me to..
kevjava wrote: 1. A button to run the code, to see that it demonstrates the problem that you wish for the forum to solve...
Interesting idea, but I think that is better suited to a more full blown (but still relatively simple) GUId compiler. I am not fully decided that running a class is unsuited to STBC, but I am more likely to implement a clickable list of compilation errors, than a 'run' button.
On the other hand I am thinking the clickable error list is also better suited to an altogether more abled compiler, so don't hold your breath to see either in the STBC.
You might note I have not bothered to update the screenshots to show the line count label. That is because I am still considering error lists and running code, and open to further suggestion (not because I am just slack!). If the screenshots update to include the line count but nothing else, take that as a sign. ;-)
Thanks for your ideas. The line count alone is worth a few Dukes.

Example code for each and every class in java API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Crossposted here: http://forum.java.sun.com/thread.jsp?thread=570264&forum=54&message=2820774

Any one has a coupon code for the photo books

anyone has a coupon code for the apple photo book? THANKS

Thanks that helped out a lot; I combined that program with the serial example. It works well, but it seems to want to update very frequently, as I am hearing relays tripping, but if I set the number I want and hit stop it goes there and will stop at that command. Is there a way to just have it send the data and then just have it leave the serial device alone unless you change the angle. As in only send the data once, but not have to re hit run.
Attachments:
GS-232 Controler.vi ‏37 KB

What is STB Remote Control code for the Magnavox 15MF400T/37 set?

Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?

If none of the codes worked, your only other option is to do a scan.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the
TV
key in step 2 and 3.)
1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK
4. Release both keys. The Device Keys will blink twice.
5. Press 9 - 2 - 2
6. Point the remote at the TV.
7. Press the play button
8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.
9. When the TV turns off, you have found the right code. Press OK to store this code.
Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT
If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.
====================================================================================
Error exists between keyboard and chair.

Is there C# example code for the NI 9485 SSR

Similar Messages

Maybe you are looking for