Is There Complete Code for the af:selectManyShuttle?

I veiwed the Section 19.8 of the Oracle Application Development Framework Developer's Guide. It illustrate how to create a selectManyShuttle and provides some code. However, the code is incomplete.
Where do I find the complet code for it?
In fact, I am not doing something that complicated. I do not have to link the Shuttle to a List of staff. All I am doing is to move elements from one list box to another.
Can anybody provide an example? Thank you very much.

Download the SRDemo sample application and you'll find the complete code there.
You can get it from the help->check for updates

Similar Messages

  • Please give the complete code for the below problems with action page and Form.

    Create an array, which is holding ‘n’ strings (words), , and implement the functionality to search given string  is present in the array. Give an option to the user to enter the word  to be searched
    Create a static array of ‘n’ numbers , and implement the functionality to search given number is present in the array. Give an option to the user to enter the number to be searched
    Implement the functionality to search given word is present with in the predefined sentence. Give an option to the user to enter the word  to be searched

    As haxtbh has pointed out, these forums are for HELPING you fix code you've already tried and are having issues with.  We aren't here to write your code, whether for a project or homework, from scratch.  We can only help you if you help us by making an attempt.
    V/r,
    ^_^

  • Is there any differnce between the Numeric Limit Test source code from TestStand 3.0 to TestStand 3.1? How to get the source code for the Numric Limit Test for both the versions?

    I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
    Thanks,
    Jeyan

    Hi,
    I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
    What has prompted this question?
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Hi when I try to connect some bluetooth devices I get asked for my pass code for the mac air .  I never had 1 is there a default code

    hi
    when I try to connect some bluetooth devices I get asked for my pass code for the mac air .
      I never had 1 is there a default code
    thanks
    rob

    the shaker wrote:
    is there a default code
    no.

  • How to see the complete code behind the tile?

    Hi All,
    I am working on MSA 4.0. I am able to see the code by double clicking on the methods in the tile but unable to view the complete code behind the tile. I want to see the complete code behind the tile. Can anyone help me with this?
    Best regards
    Vasudha

    Hi Boyai,
    Thanks for the reply. I am able to open the code. Two VBA windows for UI and BOL source code are opened.
    1) I compiled the code.
    2) I selected a particular tile. The methods , event handlers are displayed there.On double clicking one of the method i am able to view a particular code.
    But i want to view the complete code behind that tile like in MSA 5.0 when we right click on the tile-> view code.
    How can i view the complete code behind the tile in MSA 4.0?
    Best Regards
    Vasudha.

  • Provide the java code for the following scenario.

    Hi Experts,
    I have tried with all the combinations for this scenario. As per my understanding i require java code for the following scenario
    so that it becomes easy........
    I require a Message mapping for this Logic.
    In the Source there are 4 fields and, the Target side, the fields should appear like this.
    Source Structure- File
    Record
    |-> Header
    Order_No
    Date
    |-> Item
    Mat_No
    Quantity
    Target Structure-IDoc
    IDoc
    |-> Header
    |-> Segment
    Delivery_Order_No
    Recv_Date
    |-> Item
    |-> Segment
    Delivery_Order_No
    Material_Num
    Recv_Quantity.
    The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
    For example:-
    we have
    Source Structure- File
    Order-no Date Mat_No Quantity
    1 01/02/2011 A 10
    1 01/02/2011 B 15
    1 01/02/2011 A 10
    2 01/02/2011 C 10
    2 01/02/2011 C 10
    3 01/02/2011 D 20
    3 01/02/2011 D 10
    3 01/02/2011 E 25
    Target Structure-IDoc
    Delivery_Order_No Recv_Date Material_Num Recv_Quantity
    1 01/02/2011 A 20
    1 01/02/2011 B 15
    2 01/02/2011 C 20
    3 01/02/2011 D 30
    3 01/02/2011 E 25
    So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
    Kindly provide the java code.
    Thanq very much in advance..

    what i have understood from ur example is that u want to generate an idoc for unique combination of  Order-no and Mat_No
    if yes then chk the below mapping..
    change the context of Order_No, Date, Mat_No and Quantity to Record (right click-> context)
    1)
    Order-no
    ----------------------concat[;]---sort----splitbyvalue(valuechanged)-----collapse context---IDoc
    Mat_No
    2)
    Order-no
    --------concat[;]---sort----splitbyvalue(value changed)---collapse context---UDF1--splitbyvalue(each value)--Delivery_Order_No
    Mat_No
    3)
    Order-no
    -----------concat[;]---sortbykey----------------------- \
    Mat_No                       /                            \
    Date--------------- /                                       \
    ----------------------------------------------------------FormatByExample-----collapsecontext---splitbyvalue(each value)----Recv_Date
    Order-no                                                 /
    -----------concat[;]---sort----splitbyvalue(value changed)
    Mat_No
    4)
    Order-no
    --------concat[;]---sort----splitbyvalue(value changed)---collapse context-UDF2--splitbyvalue(each value)--Material_Num
    Mat_No
    5)
    Order-no
    -----------concat[;]---sortbykey
    Mat_No                       /
    Quantity --------------- /
    ----------------------------------------------------------FormatByExample-----SUM(under statistic)----Recv_Quantity
    Order-no
    -----------concat[;]---sort----splitbyvalue(value changed)
    Mat_No
    UDF1:
    String [] temp= a.split(";");
    return temp[0];
    UDF2:
    String [] temp= a.split(";");
    return temp[1];

  • USER COMMAND CODE for the ICON "Back"

    Hello All,
                 I wanted to know if there is any command code for the user-command icon "back" that i can use while programming.
    e.g. as for the icon "save" there is '&data_save' code which we can use.
    I have used the code "&F03" for 'back" but it does not call the routine i have written for the same.
    So if in case no other code for "Back" icon is available, what is the procedure to implement the "back" command through programming?
    as when i click the icon,the code written inside the report should be executed along with the normal "back" function.
    Thanks

    Hi..
    you do one thing..put /h. then click on back.At the bottom pART of the debugging screen u find
    Field names section..There type sy-ucomm and press enter. The value of sy-ucomm can be seen...
    Thats the value u need...Which u can use the same in case statement
    and its case sensitive.chk the same.. and  write it in quotes( ''). that is 'BACK' or 'F03'
    Edited by: Rudra Prasanna Mohapatra on Jun 21, 2008 7:48 AM

  • Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

    Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

    cymrieg,
    Your code looks good to me. What is the problem? What happens when it fails? What is the IBSTA value on the controller, and at what point in the code does it stop? What is the IBSTA value on the slave, and at what point does it stop?
    One thing is that you might not want to call IBCLR() in a loop on the device. At the beginning of the program is fine...This will send a clear command to the device and will clear out any LACS and TACS bits that might be set. Also your IBDEV call shouldn't be in a loop.
    Hope this helps, but let me know if you need more information.
    Scott B.
    GPIB Software
    National Instruments

  • HT5961 I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number

    I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number, so how can I change it to receive it on my cell phone ?

    I found this in the iCloud Keychain FAQs:
    How do I set up iCloud Keychain on a new device if I don't have one of my other devices to approve from?
    If you don't have access to any of your other devices that are using iCloud Keychain, you can still set up iCloud Keychain on another device if you have these items:
    - Your iCloud Security Code
    - The device that is using the SMS-capable phone number you provided when you first set up iCloud Keychain. A verification code is sent via SMS to this phone number. If you don't have access to this number, contact Apple Support, who can verify your identity so that you can complete setup on your new device.
    - If you have these items, follow the iCloud Keychain setup steps documented above. Your iCloud Keychain will then be pushed from the cloud to the new device.
    So it seems that you would have to directly contact the Apple Support: http://www.apple.com/support/icloud/contact/

  • Changes of the ZIP Code for the sales organization

    Hi All,
    I have done the changes of the ZIP Code for the sales organization by using the t code ovx5  the change of zip code in adress but when i rechek the changes in the order acknowledgement output there i can see the old zip code only.
    Please help me how to make the change the zip code to SO, so that i can view that in output.
    need to update pls help..
    Thanks for help
    Raj.

    Hiii
    Check weather your developer hardcode the sales organization pin code: else check the logic weathe Sales org Pin Code is getting from following logic. Go to table TVKO and put ur sales org number in VKORG field  then execute
    Get the ADRNR number and pass the same in ADRC table and get the POST_CODE1 as pin code number (give same logic to your abaper)
    Regards
    Shambhu Sarkar

  • Where is the code for the collapse button in the default SAP iview layout?

    I need to eliminate the collapse/restore button displayed on each iView tray. I was looking at the default layout component (com.sap.portal.layouts.default) but I could not find the code for the tray.  The code for "FullWidth.jsp" (this file that implements the "FullWidth" component) is below:
    <%@ taglib uri="prt:taglib:com.sap.portal.reserved.layout.TagLibHtmlb" prefix="hbj" %>
    <%@ taglib uri="prt:taglib:com.sap.portal.reserved.layout.TagLibLayout" prefix="lyt" %>
    <lyt:template>
        <hbj:content id="myContext" >
            <hbj:page title="Portal Page">
                <lyt:container id="column1"  />
            </hbj:page>
        </hbj:content>
    </lyt:template>
    as you can see, there is no reference to the tray tags.
    note: I am familiar with how to create a new iView tray using the new Layout Tag Library (from blog below)
    EFP: Layout Tag Library
    , but I want am not interested in this approach... All I want is to modify the EXISTING tray.

    Hi,
    may be it's helpful for you.
    http://blog.flexexamples.com/2010/05/18/changing-the-background-color-of-a-disabled-spark- textarea-control-in-flex-4/
    Regards
    -Bechar

  • Content Query Web Part (CQWP) displaying ASCII code for the colon portion of a time

    I'm having an issue with a CQWP displaying &#58; for the colon portion of a time.  For example, instead of 6:30, the CQWP shows 6&#58;30. 
    I checked our encoding which is set to UTF-8.  We also have a custom style on the CQWP and I've made sure that our custom itemstyle.xsl file has the disable-output-escaping property set to yes. 
    When I look at the list I'm querying from, the ascii code is not showing in there; it's displaying properly as 6:30.  I tried to flip this by replacing the colon with the ascii symbol in the list but it still showed the ascii code on the CQWP.
    Any ideas?

    Hi Cameron,  thanks for your reply.  The solution in the blog would work for an area that is only for date or time.  Unfortunately, this particular section of my CQWP is more than just a time; it's the summary of a news article--
    which may or may not contain a time depending on what the news article is about. 
    In further testing I have also noticed, when viewing the source code, that the colon is represented as
    &amp;#58; which tells me that the ampersand of the ascii code for the colon is also being convertied to ascii (in a sort-of double
    conversion situation.)  This isn't something I've ever seen before.

  • When importing a spreadsheet with redeem codes into apple configurator, it says it's not the right codes for the app.  But it is the right codes. I used one of the codes to purchase the app in itunes.

    I have a cart of 25 ipads with a macbook air.  I have logged into my VPP account and purchased the needed number of copies.  I downloaded the spreadsheet.  I took the first code from the spreadsheet, and logged into itunes using a regular account (not my VPP account), and used the code to download the app.  I put the app into configurator and then tried to add the spreadsheet with the codes in it.  It comes up and tells me that it is not the correct spreadsheet for that app. But it is the correct spreadsheet!!  I tried re-downloading the spreadsheet again and even tried re-downloading the app.  So I've now used two of my redeem codes and still can't get it to accept it into apple configurator.  I removed the app from apple configurator and re-added it.  The error message says it's not the right codes for the app "Grammar Games by Tap To Learn" and to please get the codes for "Grammar Games by Tap To Learn."  It's the same one!

    It won't let me edit my post, so I'm typing this reply to add...
    I tried taking the version number out of the title. It looked like there were two spaces in the title "Grammar Games  by Tap to Learn". So I even made sure that matched. I still can't import my codes. Any other things to try would be really appreciated.

  • Hi can you send mee a onlock code for the network

    hi can you send mee a onlock code for the network i can use oder sim cards i going to holideis sou i nide put in diferent sim theks

    No one here can help you, & there is no such thing as a code to send you anyway. Contact the carrier your phone is locked to to see if they offer official unlocking & what the cost/procedure is. There is no other way to get your phone officially unlocked.

  • Any one has a coupon code for the photo books

    anyone has a coupon code for the apple photo book? THANKS

    Thanks that helped out a lot; I combined that program with the serial example. It works well, but it seems to want to update very frequently, as I am hearing relays tripping, but if I set the number I want and hit stop it goes there and will stop at that command. Is there a way to just have it send the data and then just have it leave the serial device alone unless you change the angle. As in only send the data once, but not have to re hit run.
    Attachments:
    GS-232 Controler.vi ‏37 KB

Maybe you are looking for