Is this possible in Oracle Data Gaurd 11g?

Dear All,
I was looking for replication scenerio while this thing came in my mind.
We have setup 2 database servers on 2 different location, thousands of miles apart. Both servers have oracle 11gR1 and are on linux operating system.
We have been facing connectivity problems as users are accessing our application connected to one of these servers from all over the world and when there is connectivity problems applications are no more accessible.
I want to setup a stand by database server, like if there is connectivity problem on one server, or its down due to any reason applications are automatically shift to the second available server. The primary server is obvioulsy the first server and in case of no connectivity or any other problem that should bein use.
In this case we have to keep an exact copy of the primary server on second server. I want to know if Oracle data Gaurd will provide us such a functionality when the servers are on remote locations? How the data will be copied to secondry server?
Kindly let me know if there is any document available to setup such a scenerio. I will be thankful to you.
Regards,
Imran Baig

DataGuard Physical standby will keep a copy of your database on a standby server. Utilizing fast start failover with an observer (3rd party) that sees both the primary and standby server will give you the capability to automatically failover to the standby server should connectivity to the primary be interrupted. Fast start failover is configured with a threshold that will determine the amount of time it waits for lost connectivity prior to actually doing the failover allowing you to configure the threshold prior to failover. Your application accessing the database will need to reconnect to the new primary after failover.

Similar Messages

  • Can any one please tell me how to configure the oracle data gaurd. in steps

    can any one please tell me how to configure the oracle data gaurd. in steps

    Hi,
    http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#i63561
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/physstby/physstdby.htm
    Regards
    Yoonas

  • Unable to ship Redo logs to standby DB (Oracle Data Gaurd)

    Hi all,
    We have configured Oracle Data Gaurd between our Production (NPP) & Standby (NPP_DR).
    The configuration is complete however, the production is unable to ship redo logs to standby DB.
    We keep getting the error "PING[ARC0]: Heartbeat failed to connect to standby 'NPP_DR'. Error is 12154." in Primary DB
    Primary & DR are on different boxes.
    Please see the logs below in the production alert log file & npp_arc0_18944.trc trace files:
    npp_arc0_18944.trc :*
    2011-01-19 09:17:38.007 62692 kcrr.c
    Error 12154 received logging on to the standby
    Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'NPP_DR'
    Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'NPP_DR'
    2011-01-19 09:17:38.007 62692 kcrr.c
    PING[ARC0]: Heartbeat failed to connect to standby 'NPP_DR'. Error is 12154.
    2011-01-19 09:17:38.007 60970 kcrr.c
    kcrrfail: dest:2 err:12154 force:0 blast:1
    2011-01-19 09:22:38.863
    Redo shipping client performing standby login
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS:could not resolve the connect identifier specified
    alert log file on Primary*
    Error 12154 received logging on to the standby
    Wed Jan 19 09:02:35 2011
    Error 12154 received logging on to the standby
    Wed Jan 19 09:07:36 2011
    Error 12154 received logging on to the standby
    Wed Jan 19 09:12:37 2011
    Error 12154 received logging on to the standby
    Wed Jan 19 09:13:10 2011
    Incremental checkpoint up to RBA [0x2cc.2fe0.0], current log tail at RBA [0x2cc.2fe9.0]
    Wed Jan 19 09:17:38 2011
    Error 12154 received logging on to the standby
    Wed Jan 19 09:22:38 2011
    Error 12154 received logging on to the standby
    Wed Jan 19 09:27:39 2011
    Error 12154 received logging on to the standby
    However, we are able to tnsping from primary to DR
    Tnsping Results
    From Primary:
    juemdbp1:oranpp 19> tnsping NPP_DR
    TNS Ping Utility for HPUX: Version 10.2.0.4.0 - Production on 19-JAN-2011 09:32:50
    Copyright (c) 1997,  2007, Oracle.  All rights reserved.
    Used parameter files:
    /oracle/NPP/102_64/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = 10.80.51.101) (PORT = 49160))) (CONNECT_DATA = (SID = NPP) (SERVER = DEDICATED)))
    OK (60 msec)
    Tnsnames.ora in Primary:
    Filename......: tnsnames.ora
    Created.......: created by SAP AG, R/3 Rel. >= 6.10
    Name..........:
    Date..........:
    @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
    NPP.WORLD=
      (DESCRIPTION =
        (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = nppjorp)
              (PORT = 49160)
        (CONNECT_DATA =
           (SID = NPP)
           (GLOBAL_NAME = NPP.WORLD)
    NPP_HQ.WORLD=
    (DESCRIPTION =
       (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = nppjorp)
              (PORT = 49160)
       (CONNECT_DATA =
            (SID = NPP)
            (SERVER = DEDICATED)
    NPP_DR.WORLD=
    (DESCRIPTION =
      (ADDRESS_LIST =
       (ADDRESS =
            (COMMUNITY = SAP.WORLD)
            (PROTOCOL = TCP)
            (HOST = 10.80.51.101)
            (PORT = 49160)
    (CONNECT_DATA =
            (SID = NPP)
            (SERVER = DEDICATED)
    NPPLISTENER.WORLD=
            (DESCRIPTION =
              (ADDRESS =
                    (PROTOCOL = TCP)
                    (HOST = nppjorp)
                    (PORT = 49160)
    Listener.ora in Primary
    Filename......: listener.ora
    Created.......: created by SAP AG, R/3 Rel. >= 6.10
    Name..........:
    Date..........:
    @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY = NPP.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
              (KEY = NPP)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = nppjorp)
              (PORT = 49160)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = NPP)
          (ORACLE_HOME = /oracle/NPP/102_64)
    Thank You,
    Salman Qayyum
    Edited by: Salman M.A. Qayyum on Jan 19, 2011 8:12 AM

    Hi,
    Please find the remaining post ...
    Tnsnames.ora in DR:
    Filename......: tnsnames.ora
    Created.......: created by SAP AG, R/3 Rel. >= 6.10
    Name..........:
    Date..........:
    @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
    NPP.WORLD=
      (DESCRIPTION =
        (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = nppjor)
              (PORT = 49160)
        (CONNECT_DATA =
           (SID = NPP)
           (GLOBAL_NAME = NPP.WORLD)
    NPP_HQ.WORLD=
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS =
            (COMMUNITY = SAP.WORLD)
            (PROTOCOL = TCP)
            (HOST = hq_nppjor)
            (PORT = 49160)
        (CONNECT_DATA =
            (SID = NPP)
            (SERVER = DEDICATED)
    NPP_DR.WORLD=
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS =
            (COMMUNITY = SAP.WORLD)
            (PROTOCOL = TCP)
            (HOST = nppjor)
            (PORT = 49160)
        (CONNECT_DATA =
            (SID = NPP)
            (SERVER = DEDICATED)
            (SERVICE_NAME = NPP_DR)
    NPPLISTENER.WORLD=
            (DESCRIPTION =
              (ADDRESS =
                    (PROTOCOL = TCP)
                    (HOST = nppjor)
                    (PORT = 49160)
    Listener.ora in DR
    Filename......: listener.ora
    Created.......: created by SAP AG, R/3 Rel. >= 6.10
    Name..........:
    Date..........:
    @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY = NPP.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
              (KEY = NPP)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = nppjor)
              (PORT = 49160)
           (ADDRESS =
             (COMMUNITY = SAP.WORLD)
             (PROTOCOL = TCP)
             (HOST = 10.80.50.101)
             (PORT = 49160)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = NPP)
          (ORACLE_HOME = /oracle/NPP/102_64)
    /etc/hosts settings in Primary
    host:oranpp 25> grep nppjor /etc/hosts
    10.32.243.54    nppjor.sabic.com        nppjor
    10.32.50.115    nppjorp.sabic.com        nppjorp
    /etc/hosts settings in DR
    host:oranpp 11> grep nppjor /etc/hosts
    10.32.243.54    hq_nppjor.sabic.com     hq_nppjor
    10.80.243.54    nppjor.sabic.com        nppjor
    10.80.50.115    nppjorp.sabic.com        nppjorp
    Thank You,
    Salman Qayyum

  • Book on Oracle Data Integrator 11g Published May 25, 2012

    I am pleased to announce the availability of "Getting Started with Oracle Data Integrator 11g: A Hands-on Tutorial"
    Six ODI experts within Oracle ( Technical Sales, Consulting and Product Management ) collaborated and put in ALOT of work in creating:
    Title: Getting Started With Oracle Data Integrator 11g: A Hands-on Tutorial
    Authors: Hecksel, Wheeler, Boyd-Bowman, Testut, Dupupet, Gray
    Publisher: Packt Publishing
    For more information on the book: http://astore.amazon.com/davidheckselc-20
    Regards,
    David Hecksel
    http://davidhecksel.com

    Hi,
    My odi.conf looks the same as yours :
    IncludeConfFile ../../ide/bin/ide.conf
    AddVMOption -XX:MaxPermSize=256M
    AddVMOption -Doracle.core.ojdl.logging.config.file=ODI-logging-config.xml
    AddVMOption -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger
    AddVMOption -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration
    AddJavaLibFile ../../../../oracledi.sdk/lib/ojdl.jar
    AddJavaLibFile ../../../../oracledi.sdk/lib/dms.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/log4j-1.2.8.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/odi_hfm.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/odihapp_common.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/ess_es_server.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/ess_japi.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/odihapp_essbase.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/odihapp_planning.jar
    AddVMOption -Dnative.canonicalization=false
    AddVMOption -Doracle.security.jps.config=./jps-config.xml
    AddVMOption -Doracle.odi.studio.ess=false
    AddVMOption -Dide.AssertCheckingDisabled=true
    AddVMOption -Dide.AssertTracingDisabled=true
    AddVMOption -DLOG_FILE=studio.log
    AddVMOption -Dsun.java2d.noddraw=true
    SetJavaHome /usr/lib/jvm/java-6-openjdk-amd64
    About access rights : if I use "oracle" user, which is the owner of the ODI folder and its content, the result is the same. I can't figure out why it is not finding a thing ?
    Do you have more suggestions I could try ?
    Thanks a lot !
    Best regards,
    Fred

  • Is this possible in oracle?

    Hi guys,
    i was just curious whether this is possible to display in oracle like C?
    situation is like. I have to code like, it should ask user to enter the number.
    and then it should display the result on screen like this.
    e.g. if user enters 3 then it should show like..
         1
    1     2
    1 2 3
    1 2
    1
    i know it's possible in C or C++ very easily. but even if it's not possible in oracle, any logic like keeping the result rows in some table..
    regards,
    --PD!
    Message was edited by: PD(as it's not showing the correct format which i want.)
    user640364

    How about
    SQL>  var x number
    SQL>  exec :x := 4
    PL/SQL procedure successfully completed.
    SQL>  with t1 as (select level l, sys_connect_by_path (level, ' ') triag from dual connect by level <= :x order by 1 asc),
         t2 as (select level l, sys_connect_by_path (level, ' ') triag from dual connect by level <  :x order by 1 desc)
    select lpad(' ', :x - l) || triag triag from t1
    union all
    select lpad(' ', :x - l) || triag triag from t2
    TRIAG    
        1    
       1 2   
      1 2 3  
    1 2 3 4 
      1 2 3  
       1 2   
        1    
    7 rows selected.

  • Oracle Data Integrator 11g

    Hi Folks,
    We have data in EXCEL sheet.
    Our requirement is to Export the data which is available in EXCEL sheet to ORACLE TABLE with out installing MS ODBC Driver in ODI 11g.
    Could any one suggest how to do this.
    Thankyou.

    The MS excel data is accessed in ODI through the generic KMs using the ODBC connectivity as documented in Microsoft Excel - 11g Release 1 (11.1.1)
    The other alternative I can think of is to use some third party jdbc driver available for excel.   

  • "Oracle Data Integrator" with "Total Recall"

    Hi all,
    We are planning to use Oracle Data Integrator 11g for performing ELT in Oracle 11g database. We are also planning to enable the "total recall" (flashback) technology and house all our tables on it.
    Question I have in my mind right now is, will ODI and Total Recall work well together?
    Background
    Say we have an interface defined with the target data store defined on a tablespace with flashback enabled. Say there are 100 rows in the source, of which 10 rows violated the check constraint . The "bad" data, violating the constraint, will be moved to the E$ table while the rest of the 90 rows are loaded into the target.
    Questions*
    1) If our business rule dictates zero tolerance for errors and a ROLLBACK is issued, what will happen to the data in the E$ table?
    2) Say we have committed* the 90 rows and want to use a flashback transaction query to undo the changes, how will it affect the E$ table?
    3) Will the rows be deleted from the E$ table also along with rolling back of the changes in the target?
    4) If the errors in E$ are recycled and this interface is restarted after the rollback is performed, will the I$ table contain 110 rows i.e. source data + data from E$?
    5) How does ODI handle recycling / reprocessing of the violations in E$ table?
    Please advice.
    Thank you.
    CC

    1.) The data in E$ will remain there
    2.) The data in E$ will remain there
    3.) The data in E$ will remain there
    4.) 90 rows. The recycled will still error out
    5.) To me the recycling feature is pretty lame. You need to fix the errors in the E$ table and then recycle will load the data.

  • Oracle Data Miner (Bug)

    Hello All,
    I am using oracle data miner 11g for building association model (market basket analysis). When I run the model and view the results, I find that the values of Antecedent Support% and Consequent Support% are swapped. i.e. the support value of the antecedent is listed in the Consequent Support% column.
    Is it a bug in the data miner or am I mistaken?
    Edited by: 976043 on Dec 10, 2012 10:00 AM

    Hi,
    Yes you are correct.
    You can prove it my adding a Model Details node and connecting the AR Build node to it.
    The rule output from the Model Details node produced shows the true values.
    We have opened a bug to fix this and it will be in the upcoming SQL Dev 4.0 release.
    Thanks for the help, Mark

  • Oracle Data Integrator does not start

    Hi,
    I just installed ODI 11g (11.1.1.7.0), and successfully created repositories with rcu.
    But I have problems startgin the application itself. The environment may be the issue :
    OS - Debian Wheezy 64bits
    java - version "1.6.0_27"
    OpenJDK Runtime Environment (IcedTea6 1.12.4) (6b27-1.12.4-1)
    OpenJDK 64-Bit Server VM (build 20.0-b12, mixed mode)
    JAVA_HOME=/usr/lib/jvm/java-6-openjdk-amd64 -> points to jdk folder adding '/bin' to the path, which contains the java executable
    ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1 -> oracle database home
    ODI installed in /opt/ODI, and altered with CHMOD -R 775 /opt/ODI ('oracle' user, used for installation, is the owner)
    (May not be secure, but is for evaluation only.)
    I try to run ODI :
    fre@demo$cd /opt/ODI/oracledi/client
    fre@demo$./odi.sh
    Result :
    Oracle Data Integrator 11g
    Copyright (c) 1997, 2012, Oracle and/or its affiliates. All rights reserved.
    ./odi: 281: ../../ide/bin/ide.conf: APP_VM_OPTS[0]=-Xmx640M: not found
    ./odi: 281: ../../ide/bin/ide.conf: APP_VM_OPTS[0]=-Xms128M: not found
    ./odi: 281: ../../ide/bin/ide.conf: APP_VM_OPTS[0]=-Xverify:none: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-XX:MaxPermSize=256M: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-Doracle.core.ojdl.logging.config.file=ODI-logging-config.xml: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-Dnative.canonicalization=false: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-Doracle.security.jps.config=./jps-config.xml: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-Doracle.odi.studio.ess=false: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-Dide.AssertCheckingDisabled=true: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-Dide.AssertTracingDisabled=true: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-DLOG_FILE=studio.log: not found
    ./odi: 281: /opt/ODI/oracledi/client/odi/bin/odi.conf: APP_VM_OPTS[0]=-Dsun.java2d.noddraw=true: not found
    ./odi: 281: ./odi: APP_VM_OPTS[0]=-Dide.conf="/opt/ODI/oracledi/client/odi/bin/odi.conf": not found
    ./odi: 281: ./odi: APP_VM_OPTS[0]=-Dide.startingcwd="/opt/ODI/oracledi/client/odi/bin": not found
    ./odi: 810: ./odi: Bad substitution
    I will appreciate any idea to help me solving this out !
    Thanks a lot,
    Fred
    Edited by: Fred1018 on 26-May-2013 09:17

    Hi,
    My odi.conf looks the same as yours :
    IncludeConfFile ../../ide/bin/ide.conf
    AddVMOption -XX:MaxPermSize=256M
    AddVMOption -Doracle.core.ojdl.logging.config.file=ODI-logging-config.xml
    AddVMOption -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger
    AddVMOption -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration
    AddJavaLibFile ../../../../oracledi.sdk/lib/ojdl.jar
    AddJavaLibFile ../../../../oracledi.sdk/lib/dms.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/log4j-1.2.8.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/odi_hfm.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/odihapp_common.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/ess_es_server.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/ess_japi.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/odihapp_essbase.jar
    AddJavaLibFile ../../jdev/extensions/oracle.odi.navigator/lib/odihapp_planning.jar
    AddVMOption -Dnative.canonicalization=false
    AddVMOption -Doracle.security.jps.config=./jps-config.xml
    AddVMOption -Doracle.odi.studio.ess=false
    AddVMOption -Dide.AssertCheckingDisabled=true
    AddVMOption -Dide.AssertTracingDisabled=true
    AddVMOption -DLOG_FILE=studio.log
    AddVMOption -Dsun.java2d.noddraw=true
    SetJavaHome /usr/lib/jvm/java-6-openjdk-amd64
    About access rights : if I use "oracle" user, which is the owner of the ODI folder and its content, the result is the same. I can't figure out why it is not finding a thing ?
    Do you have more suggestions I could try ?
    Thanks a lot !
    Best regards,
    Fred

  • From where to download the The Oracle Data Mining sample programs for DB11g

    In the Administrator's Guide to Oracle Data Mining 11g. One of the steps is to install the the Oracle Data Mining sample programs, which, according to the author, is included in the Oracle Database Companion. The author did not specify from where to download neither the sample programs nor the database companion CD/DVD!
    I would be grateful if you could provide me with the URL that has the required download.
    Regards,

    You should be able to download ODM DB11g sample programs from the following OTN link:
    http://www.oracle.com/technology/software/products/database/oracle11g/111060_win32soft.html
    Choose 'Oracle Database 11g Examples (formerly Companion)'

  • Is it possible ?Change data capture from VSAM , DB2 , SQL Server  to Oracle

    Dear Professionals ,
    We plan to build a warehouse project.Source systems are
    * VSAM files in zOS
    * SQL Server
    * DB2
    Warehouse database is Oracle .
    Every night the changes in the source systems will be applied to Oracle warehouse DB.
    But only the changes will be applied . Exporting VSAM files to flat file and load to oracle and find the data differences in Oracle is not accepted. Or moving the entire tables to oracle and finding the changes in oracle is not accepted.Only the changes will pass through the network .
    Is "Oracle Connect" and "VSAM adaptor" capable of this ?
    Is there a solution for SQL Server and DB2 change data capture ?
    Is it Possible ? If possible is it a headache or a simple install and forget process?
    Thank you
    Bunyamin..

    Bunyamin,
    I do not know about VSAM, but I heard/read that Oracle Data Integrator is able to do change data capture on several databases. It uses the source database mechanism to do CDC. So maybe give it a try at the fusion middleware forum where ODI is being discussed

  • 1Z0-515 exam Data Warehousing 11g Essential - Oracle press Book

    Hi,
    Is there any Oracle press Book available for 1Z0-515 exam Data Warehousing 11g Essential exam
    Like it is available for OCA and OCP
    If somebody in the forum given for the exam, please suggest me the study material.
    Any other source of learning also will be appreciable(other than the one available in below link, as I could not afford for that).
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_515
    Regards,
    Gatha

    I'm not sure if Oracle Press has created books for this exam. Check here http://community.oraclepressbooks.com/.
    Regards,
    Brandye Barrington
    Certification Forum Moderator

  • EM console HA page says "Data Gaurd not configured for this database"

    I am attempting to use EM console's "High Availability Console" to create a standby database, but, the option is not available. Under "Data Gaurd Summary" the page shows "Oracle DataGaurd is not configured on this database."
    How do I configure this option so that I can use the console to create Standy databases? I have looked everywhere I can think of and cannot find any instructions!

    Click on your database name, and you'll be lead to a page which shows you all the statistics of your Db
    Click on the "Availability" Sub Tab.
    You'll see the option to "Add Standby Database". You can take it from there. (you'll be prompted to log in to your database -- log in with sys)
    Now click on "Add Standby Database"
    The process I normally follow is this
    1. RMAN your primary
    2. Create standby control file from primary.
    3. Get your init file from primary
    4. Copy everything over.
    5. Make the init file changes (fal client, fal server on primary, any kind of directory mapping, point the init file to the standby control file on the standby side)
    6. Bring up the standby db (doing all the other changes that are required)
    Then you can import that Db into OEM,
    or you could just use the Wizard from OEM :)

  • Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    If you just installed iCloud does that mean you updated the iOS that's running on your iPad?  If so, you'll want to restore all the programs you have from the backup you hopefully made.
    Refer to these articles for help.
    iTunes: Backing up, updating, and restoring iOS software.
    If you don't want to use iCloud, simply don't activate it.
    You can also download the programs again.
    If you live in a country that supports re-downloading apps then you can re-download them.  You can refer to this article for more help.
    Downloading past purchases from the App Store and iTunes Store
    What to know if your country supports downloading past purchases?
    iTunes in the Cloud Availability

  • How Can I put an Artists Live Albums in a separate folder, so they sort by "Concert Date" in iTunes and do not "intermingle" so to speak with Studio Albums?  Is this possible?

    How Can I put an Artists Live Albums in a separate folder, so they sort by "Concert Date" in iTunes and do not "intermingle" so to speak with Studio Albums?  Is this possible?
    That is about the best way I can phrase my question.
    I put year/month/date at the beginning of a show, hoping for them to sort by date and I get mixed results.
    Would creating a Folder within the Artists' existing folder  that said "Pearl Jam Live", inside the "Pearl Jam" folder in iTunes Media help this "Date Sorting Issue"?
    Thank you.

    Or is there a way to go through aperture to make a new reference library that I can move the masters into later?
    you do not move the masters into a references library - you turn your current library into a referenced library.  As Terence Devlin said:
    File -> Relocate Masters
    What you should set up:
    Select a folder, where you want to store your referenced files - probably on an external drive.
    Decide on a hierarchical folder structure inside this folder - that is completely up to you.
    Select a project from your library and use the command "File -> Relocate Masters/Originals" to move the original image files to the folder where you want to go them to. Only take care not to send two projects to the same folder.
    Alternatively, if you do not care about the folder structure Aperture will use, select all images at once from the "Photos" view and let Aperture decide how to assing the folders - in the "Relocate Originals" dialoge you can specify a subfolder format.
    Regards
    Léonie

Maybe you are looking for

  • Import wizard and linked server

    Hi guys, I got a problem that I'm trying to resolve but it's gonna to be hard... Sql 2008 R2, I got two linked server from Oracle ( I think that the linked server are two filegroup). I need to move some table ( millions of rows) from Oracle, so the l

  • Flash won't detect Cameras, but works on Chrome

    Updated to flash 11.0.1.152, now any web chat site that uses flash can only detect the built in iSight camera - none of the other cameras that I have attached. Flash detects all cameras while using Chrome, but not Firefox. Does anyone know why it doe

  • Create Input Method component

    I need to make an Input Method for a language. It would function similar to that of the Kotoeri or Chinese components: namely after the inline input of some text, the desired Unicode glyph would be called. All of the references in the ADC pages presu

  • Register Access files from Java

    Hello: I have to create Access databases at runtime from a Java application in Windows. I must also be able to list all data sources registered with Windows from the same application. In all likelihood, all this must be possible via a conversation wi

  • Daylight Savings patching and XE

    Will there be a patch for XE and those who don't have Metalink? Maybe download XE w/a patch? thx