ISCSI Driver Version 3.4.5

Hello
for Tests I need iSCSI Driver Version 3.4.5 for IBM AIX 5.1 aund HPUX 11.1 which are out off support and not avaiable on Cisco Side anymore
Can you help me
Best Regards
Reinhold Flecke

Hello Reinhold,
As per this document, this product has not been supported since end of 2006. (
http://www.cisco.com/en/US/products/hw/ps4159/ps2160/prod_eol_notice09186a008032d51b.html)
So unfortunately, I cannot help you obtain these drivers.
I would like to help you with this, can you explain a bit more what you are testing and what your setup is, maybe we can find a workaround together.
Best regards,
Kris

Similar Messages

Error while Registering a iSCSI drive on to Storage array

Hi,
I've installed Oracle VM Manager 3.0.2 on Oracle Linux 6.1. When I tried to register a iSCSI drive on to Storage array, I go the following error:
"java.lang.NullPointerException
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #4"
Also there is no items to be selected in the Storage Plug-in.
I read that Storage plug-in is in-built with version 3.0 and above.
Any help in this regard will be greatly appreciated.
Thanks,
Prajeesh

Prajeesh wrote:
Also there is no items to be selected in the Storage Plug-in.Have you discovered at least one Oracle VM Server yet? You can't add any storage until you do that successfully.

Large file copy to iSCSI drive fills all memory until server stalls.

I am having the file copy issues that people have been having with various versions of Server now for years, as can be read in the forums. I am having this issue on Server 2012 Std., using Hyper-V.
When a large file is copied to an iSCSI drive, the file is copied into memory first faster than it can be sent over the network. It fills all available GB of memory until the server, which is a VM host, pretty much stalls and also all the VMs stall. This
continues until the file copy is finished or stopped, then the memory is gradually released as it is taken out of memory as it is sent over the network.
This issue was happening on send and receive. I change the registry setting for Large Cache to disable it, and now I can receive large files from the iSCSI. They now take an additional 1 GB of memory and it sits there until the file copy is finished.
I have tried all the NIC and disk settings as can be found in the forums around the internet that people have posted in regard to this issue.
To describe in a little more detail, when receiving a file from iSCSI, the file copy windows shows a speed of around 60-80 MB / sec, which is wire speed. When sending a file to iSCSI, the file copy window shows a speed of 150 MB/sec, which is actually the
speed at which it is being written to memory. The NIC counter in Task Mgr shows instead the actual network speed which is about half of that. The difference is the rate at which memory fills until it is full.
This also happens when using Window Server Backup. It freezes up the VM Host and Guests while the host backup is running because of this issue. It does cause some software issues.
The problem does not happen inside the Guests. I can transfer files to a different LUN on the same iSCSI, which uses the same NIC as the Host with no issue.
Does anyone know if the fix has been found for this? All forum posts I have found for this have closed with no definite resolution found.
Thanks for you help.
KTSaved

Hi,
Sorry if it causes confusion but "by design" I mean "by design it will use memory for copying files via network".
In Windows 2000/2003, the following keys could help control the memory usage:
LargSystemCache (0 or 1) HKEY_LOCAL_MACHINE\CurrentControlSet\Control\Session Manager\Memory Management
Size (1, 2 or 3) in HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameter
I saw threads mentioned that it will not work in later systems such as Windows 2008 R2.
For Windows 2008 R2 and Windows 2008, there is a service named Microsoft Windows Dynamic Cache Service which addressed this issue:
https://www.microsoft.com/en-us/download/details.aspx?id=9258
However I searched and there is no update version for Windows 2012 and 2012 R2.
I also noticed that the following command could help control the memory usage. With value = 1, NTFS uses the default amount of paged-pool memory:
fsutil behavior set memoryusage 1
You need a reboot after changing the value.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Help in removing iSCSI driver

I had an earlier version of Cisco iSCSI driver, 2.1.1, installed, and I thought I had removed it. However, the iscsicfg.cpl file remained in the system32 directory and I couldn't delete it.
Cisco doc mentioned to run the setup program to de-install the software, but I couldn't find that option. Please help

You could always delete it in Safe Mode.

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Oracle RDB driver Version 3.01.00.01 Connectivity Issue

I have a SQL Server 2000 extended stored procedure connecting to an Oracle RDB data server via an ODBC connection (using Oracle RDB driver Version 3.01.00.01). The SQL Server 2000 runs on a Windows 2000 Server.
This extended stored procedure opens up multiple database connections and maintains them for processing. Usually, everything runs fine.
However, every so often, we have connectivity issues. What happens is as follows:
When we bring a station down and then try to reconnnect, our connection is denied, and we get the error: "recv() unexpected close Ret 0 Err#0 UNKNOWN Unknown WINSOCK Error 0". (This error is logged by the .dll running in the SQL Server processing space.) From the first time we receive a connectivity error like this until the Oracle RDB box is rebooted, we cannot establish another new ODBC connection to that Oracle RDB box --- whether we are trying to establish it programmatically or just via a "test connection" in the ODBC dialogue on the SQL Server box.
We can, however, establish an ODBC connection to another, identically configured, Oracle RDB box from the SQL Server box (without restarting the SQL Server box).
Has anyone had experience with instable connections from Windows system using the Oracle RDB driver to connect to the Oracle RDB? If not, can anyone point me in a direction that would help me research this? I am more familiar with SQL Server than Oracle, and the Oracle DBA on the other end isn't very accessible.
I'd really appreciate any help anyone can give me.
Thanks!

I got same error.. Are you already solve that problem? how? please help me. Thanks

I need to use a Driver Version 1.4 for my my Sharp printer. When I add the printer, it is driver version 1.3?

I need to use Driver Version 1.4 for my Sharp printer. When I add the printer it says Version 1.3?

Have you asked Sharp whether they have a driver that is Mavericks compliant?

Driver Version Not Found" Error when installing drivers for X-fi Xtreme audio

I recently bought the game Bioshock off steam and have been unable to play as it crashes as soon as I try to launch it. After doing some digging around I found out it was a sound problem. When I was looking at the drivers for my sound card (Sound Blaster X-Fi Xtreme Audio) I noticed that the driver called:?XFXA_PCDRV_LB__04_0079.exe has a fix for Bioshock. However when I install the driver I get the error "Driver version not found". I am positi've it is the correct driver for my sound card. I am on Windows 7 64bit.

Hey!
I have Vista Ultimate x64 and I ran windows update couple days ago. There was a new update for my xtreme audio pci-e. I installed it and now my driver version in creative software update is .3.2. Before i updated i ran creative's own software update. It didn't find any new drivers. I was WTF. I think that new driver fixed my volume problem. I had problem's when there was a deep bass in a song. The sound card lowered volume levels then somehow. Now that happens no more. In vista's device control it shows the driver version as 6.0.0.203. Driver date is 7 october 2008.

Mac OSx 10.8.5 and HP laser jet 2100M printer w/ driver version 19.8--Doesn't print!

I've got a macbook pro with Mac OSx 10.8.5. I've successfully printed with my HP Laser jet 2100M printer until recently. The driver version is 19.8. I don't know what changed but about a month ago the printer says "printing--connected to printer" but it never prints. What do I need to do to get my printer and my macbook to communicate again and start printing? I also have a mac mini desktop running on mac osx 10.7.5 and it doesn't talk to the HP Laser jet 2100M either (also driver 19.8.Please, can you tell me how configure so these macs will be able to print to my printer?

I have had a similar issue with my HP LaserJet 1320 printer on OS X 10.8. On certain PDF files (only those that I have tested so far), the data will send fine from the computer (and the job goes away) but the printer balks and drops the print job on its end. It's only when I save it as an image in Preview and then print will it work (advice from this forum post). However, when I updated the driver from 19.8 to 19.13 (in the Apple Software Update), it seemed to fix it. Do you know what changed between 19.8 to 19.13?

Problem Installing ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION)

Hi
I am trying to install ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION) which I got with the official ABAP Reference book of SAP press.
It is installing upto 91% and giving the following errors:
RC code form SyCoprocessWait = -2 .
Error: DBR3LICENSECREATE ExecuteCheck 2 718
Exit code from C:\MiniWAS\saplicense: -2.
Error: DBR3LICENSECREATE InternalInstallationDo 2 718
Phase failed.
Error: DBR3LICENSECREATE InstallationDo 2 718
Phase failed.
Error: Main {} 2 718
Installation aborted.
I am trying to learn ABAP and need to practise it. Could someone please help me in this matter.

Restart the install and search this forum for "MiniWAS", "Mini Was", "620 install" and you'll find half a dozen people who had the same problem.

Memory leak in ODBC Driver version 8.1.7.8?

We have a web application connected to an 8.1.7 database on a MS Windows 2000 SP 2 server.
We recently upgraded ODBC driver from 8.1.7.7 to 8.1.7.8 and found that we ran out of virtual memory.
On further investigations, a simple refresh of our summary web page (going to the database to select a small recordset - even when there are only 2 records with 6 small VARCHAR2 fields) causes the virtual memory usage to increase by approximately 1Mb each refresh.
The same refresh using driver 8.1.7.7 occasionally increases the VM usage by 4Kb!
Is there a memory leak in ODBC driver version 8.1.7.8?

Hello Thomas,
thanks for your tips, but they did not help. Activating Connection Polling did not change anything. And opening another connection did not help, either. I did it the following way:
Sub memtest2()
Dim conODBC As New ADODB.Connection
conODBC.ConnectionString = "Data Source='xxxx';User ID='xxx';Password='xxx'"
conODBC.Open
Dim Rs1 As Recordset, Rs2 As Recordset, DB1 As Database
Set DB1 = CurrentDb
Set Rs1 = DB1.OpenRecordset("select id from artikel")
Do While Not Rs1.EOF
    Set Rs2 = DB1.OpenRecordset("select * from artikel where id=" & Rs1("id"))
    'do something
    Rs2.Close
    Set Rs2 = Nothing
    Rs1.MoveNext
Loop
Rs1.Close
Set Rs1 = Nothing
DB1.Close
Set DB1 = Nothing
conODBC.Close
End Sub
Perhaps one of you has another tip how this can be done.
@Lukasz:
using a seperate ADODB.Connection works fine, but that does not solve the problem itself. At first I would have to rewrite much code and the second much bigger thing is that the memory leak occurs even when working with bound forms in MS Access. For example: I have one large form with many subforms on it. If i go from record to record on this form the memory usage is increasing dramatically fast and there is no way to influence what kind of connection MS Access is using for bound forms.
Regards
Thorstem

GPU: currently disabled due to an error (unsuported hardware/driver version)

I still have problems after the last update (ACR 9).
There is a note - GPU: currently disabled due to an error (unsupported hardware/driver version).
I use AMD FirePro V4800 that is in the list of Adobe - Photoshop CC and CC 2014 GPU FAQ , as followed
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
nVidia GeForce: 400, 500, 600, 700 series
nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
nVidia GRID K1, K2
AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
AMD/ATI FireGL: W5000, W7000, W8000
Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
I installed the latest driver from AMD site - Workstation
So, my system has the latest driver now
The release notes of the driver say that now my video-card supports
DirectX ® - 11
OpenGL - 4.3
OpenCL™ - 1.2
What could be wrong? And what should I do?
PS Photoshop also works strange: some of plug-ins (for example, by Nik Software) show a white window in the place where the picture should be.
Should I buy Nvidia Quadro K4200? But is was not in my plans at the moment when I did the last upgrade of Camera Raw.

Hello,
First, please consult the Camera Raw GPU FAQ for specific troubleshooting tips.
https://helpx.adobe.com/photoshop/kb/acr-gpu-faq.html#Suggested%20System%20Requirements%20 &%20Graphics%20Cards
You may need to completely uninstall/reinstall the drivers for your AMD card. Please consult the manufacturer's support site for the uninstall/reinstall procedures.
Hope that helps,
- Chris

How can I find the JDBC Driver version

Hi,
How can I find the JDBC Driver version installed on my Sun Solaris machine which
has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
do so or does Weblogic console say something about it
Thanks
Parikshit Khanna

Parikshit Khanna wrote:
Hi,
How can I find the JDBC Driver version installed on my Sun Solaris machine which
has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
do so or does Weblogic console say something about it
Thanks
Parikshit KhannaThere is a jdbc DatabaseMetaData call getDriverVersion().
The best thing to do is to download Oracle's latest appropriate
driver from their site, and edit the start-weblogic script to
make sure the downloaded driver is ahead of any weblogic stuff in
the server's classpath. We do ship a driver, but Oracle usually
has a newer better one very soon after that...
Joe

In Trouble with the Oracle JDBC Driver version - 10.1.0.5.0

Hi !
Without any problems i'm using the Oracle JDBC Driver version - 10.1.0.3.0 to access to the
Oracle database (Oracle Database 10g Release 10.2.0.1.0 - 64bit Production).
But exchanging the JDBC Driver 10.1.0.3.0 to 10.1.0.5.0 brings up the following problem:
the statement
con.prepareStatement(sql, resultSetType, resultSetConcurrency, resultSetHoldability)
(with parameters resultSetType = 1003, resultSetConcurrency = 1007, resultSetHoldability= 1)
returns null !
while using the Oracle JDBC Driver version - 10.1.0.3.0 the statement (with same parameters)
returns a correct PreparedStatement.
Every hint or idea is welcome.
Best regards,
Claus

Duplicate post:
In Trouble with the Oracle JDBC Driver version - 10.1.0.5.0
Claus,
Pardon me if I am stating the obvious, but why don't you use the 10.2 JDBC driver with your 10.2 database? The driver is part of the database distribution. Otherwise, you can download the driver from the OTN Web site.
Good Luck,
Avi.

Repeated Nvidia error on Vaio Z1 laptop: "Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered." Any thoughts?

I keep having my screen go black and then Win 7 pro gives me this error:
"Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered."
everything is fine after that.
happens 3 or 4 times a day.
'''doesn't '''seem to be on graphics or flash heavy sites.
driver is up to date and tried reloading driver.

I keep having my screen go black and then Win 7 pro gives me this error:
"Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered."
everything is fine after that.
happens 3 or 4 times a day.
'''doesn't '''seem to be on graphics or flash heavy sites.
driver is up to date and tried reloading driver.

ISCSI Driver Version 3.4.5

Similar Messages

Maybe you are looking for