Isolating lines of table Data based on maximum date

Post Author: morty
CA Forum: Formula
G'day fellow Crystal Users. Please help me. I have a table that records employees and their salary information. The key field in the table is the Employee's 'Employee Number' however this is not a unique field as each time an employee receives a pay increase a new line of data is created for them. So what I want to be able to do is isolate their most current pay line/information. The obvious field to isolate this data is the 'date of the increase' field. I have tried using the 'maximum' function but cannot seem to get it to do what I want. Can anybody please help me???????

Post Author: Jagan
CA Forum: Formula
Group by employee, and use the group selection formula to only get the most recent salary record per employee, i.e.
{salary.date} = maximum({salary.date}, {employee.id})

Similar Messages

Creation of internal table dynamically based on the Date Range entered

Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
CSR District 06/2006 07/2006 08/2006 totals
Shiva New York 10.00
Shiva new york 30.00
Shiva new york 40.00
but it should display like this
CSR District 06/2006 07/2006 08/2006 totals
Shiva New York 10.00 30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram Kandula

Hi Sivaram,
 I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
 ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
 ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
* <dyn_wa> = tab_item-bztxt.
* <dyn_wa> = tab_item-total.
* APPEND <dyn_wa> TO <dyn_table>.
** <dyn_wa> = tab_item-total.
** ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = gt_fCAT1
 IMPORTING
 ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
 create data new_line like line of <dyn_table>.
 assign new_line->* to <dyn_wa>.
select vbeln
 fkart
 vkorg
 vtweg
 fkdat
 spart
 fksto
 from vbrk
 client specified
 into table gt_vbrk
 where mandt = sy-mandt
 and fkart in ('ZF5','ZFR')
 and vkorg = '1100'
 and vtweg = '20'
 and fkdat in s_fkdat
 and spart = '06'
 and fksto = ' '.
 if gt_vbrk[] is not initial.
select vbeln
 fkimg
 prsdt
 netwr
 matnr
 arktx
 werks
 mwsbp
 from vbrp
 client specified
 into table gt_vbrp
 for all entries in gt_vbrk
 where vbeln = gt_vbrk-vbeln
 and werks in s_werks
 and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
 name1(3) type c,
 s_month type string,
 s_month1 type string,
 s_month2 type string.
* lv_netwr1 type vbrp-netwr,
* lv_mwsbp1 type vbrp-mwsbp.
 loop at gt_vbrp into gs_vbrp.
 gs_final2-matnr = gs_vbrp-matnr.
 gs_final2-arktx = gs_vbrp-arktx.
 gs_final2-fkimg = gs_vbrp-fkimg.
 lv_month1 = gs_vbrp-prsdt.
 read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
 if sy-subrc eq 0.
 name1 = wa_t247-ltx.
 endif.
 concatenate name1
 lv_month1(4) into s_month SEPARATED BY '_' .
 CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
 CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
 gs_final2-month = s_month.
 lv_netwr1 = gs_vbrp-netwr.
 lv_mwsbp1 = gs_vbrp-mwsbp.
 gs_final2-MONTH_QTY = S_MONTH1.
 GS_FINAL2-MONTH_VAL = S_MONTH2.
 gs_final2-value = lv_netwr1 + lv_mwsbp1.
 append gs_final2 to gt_final2.
 clear: gs_final2. "lv_name2.
 endloop.
 if gt_final2[] is not initial.
 sort gt_final2 by matnr month ascending .
 loop at gt_final2 into gs_final2.
 gs_final2_01 = gs_final2.
 collect gs_final2_01 into gt_final2_01.
 endloop.
 endif.
 ENDIF..
Regards
Ankur

Which all tables suffice all line item GL data requirements

Please clarify this requirement for Line Item Data from New GL. my client BMW Inc have configured New GL in ECC 6.0 if i pull all the records to BW from FAGLFLEXA (Line Item Table) is that sufficient to meet the all line item GL data or is there any other tables missing that also shall be combined to bring the Line item GL data. Please help me for this if u can check with any of your friends in FICO.
2. I have seen that BSEG AND BKPF are used earlier in old FI versions so what is there now in New GL ECC 6.0 that will suffice for these BSEG AND BKPF or still i have to pull records by using these tables. for GL Line Item Data.
If you can help me to give the short overview of New GL posting process it would be great.
Thanks
Regards
Soniya Kapoor

Hi Soniya,
FAGLFLEXA & FAGLFLEXT would contain all FI line item
http://help.sap.com/saphelp_erp2005vp/helpdata/en/a8/e26840b151181ce10000000a1550b0/content.htm
Pls assign points as way to say thanks

Copy the data from first line while dynamically adding a new line in table

Hi,
1. There is a table
2. An add button adds a new line to the table using 'AddInstance'
3. A record is entered in the first line
4. When the add button is clicked it adds a new line and along with it copies the data entered in the first line
My question is how to copy the data from the first line and show it in the new line added. This is required so that user can use most of the common values in the first line.
Thanks,
Nikhil

You can use the following Java Script in the Click event of the button.
// Get the number of rows in the table
var nrows = xfa.resolveNodes("page.table.DATA[*]").length;
// Add a new instance(row) to the table
page.table.addInstance.instanceManager(1);
xfa.form.recalculate(1);
// Copy the values from the first line to the newly created row
page.table.DATA\[ nrows \].field1.rawValue = page.table.DATA\[ 0 \].field1.rawValue;
..........field2
..........field3
Thanks,
Chandra Indukuri

How to handle tables data in XML schema based adobe form

Hi all,
I am working on the CRM business partner creation by using Interactive adobe form with following steps:
1) Uploaded the offline Interactive adobe form to online interactive adobe form via WebDynpro ABAP;
2) Capture XML data into corresponding BAPI structures;
3) Save all the changes to database via BAPI.
The adobe form contains customer information as well as several table views which are bind with the context created in WebDynpro: Node NEW_BP_NODE cardinality 1:1 with single attributes and table type attributes (1:n): COLOUR_COMP, MEN_COMP etc.
While converting the xml format data to SAP context format, It is fine to use following routine to find the single attribute and map to the BAPI structure to do the database update.
NODE = DOCUMENT->FIND_FROM_NAME( NAME = 'XYZu2019).
XYZ = NODE->GET_VALUE( ).
Question: how to convert the xml table data to SAP context format in WebDynpro ABAP?
The XML table data looks like below.
<?xml version="1.0" encoding="UTF-8" ?>
<NEW_BP_NODE>
<COLOUR_COMP>
<DATA>
<ZZTFLD0W2AQW />
<ZZTFLDRZ2AQX>000</ZZTFLDRZ2AQX>
<ZZTFLDVD2TQW />
<ZZTFLDQK2HQX />
<ZZTFLDEL2XQX />
<ZZTFLDTC2DQX>000</ZZTFLDTC2DQX>
<ZZTFLDOR2UQX />
</DATA>
<DATA>
<ZZTFLD0W2AQW />
<ZZTFLDRZ2AQX />
<ZZTFLDVD2TQW />
<ZZTFLDQK2HQX />
<ZZTFLDEL2XQX />
<ZZTFLDTC2DQX />
<ZZTFLDOR2UQX />
</DATA>
<DATA>
<ZZTFLD0W2AQW />
<ZZTFLDRZ2AQX />
<ZZTFLDVD2TQW />
<ZZTFLDQK2HQX />
<ZZTFLDEL2XQX />
<ZZTFLDTC2DQX />
<ZZTFLDOR2UQX />
</DATA>
</COLOUR_COMP>
<MEN_COMP>
<DATA>
<ZZTFLD4V2V7V />
<ZZTFLDYD2N7W>000</ZZTFLDYD2N7W>
<ZZTFLDX32I7W />
<ZZTFLD2D2W7W />
<ZZTFLDGD2A7W />
</DATA>
<DATA>
<ZZTFLD4V2V7V />
<ZZTFLDYD2N7W>000</ZZTFLDYD2N7W>
<ZZTFLDX32I7W />
<ZZTFLD2D2W7W />
<ZZTFLDGD2A7W />
</DATA>
</MEN_COMP>
Thanks in advance for your help.
Michelle

Hi,
Just follow these steps:
1. Create interactive form UI element in your view.
2. Now provide Datasource and PDFSOURCE to it in form properties.
3. Now give a template name prefix with 'Z' or 'Y'.
4. Double click on it. It will prompt for interface name.
5. Provide interface name prefixed with 'Z' or 'Y'.
6. Click on Context button in the Pop up window and provide the node you have selected as DATASOURCE.
7. Click ok and it will open the form designer.
8. In this way you can create a XML Schema based Form.
9. Activate the interface and design the form providing layout type and other details.
Hope it will help.
Regards,
Vaibhav

I am using pages '09. I have been trying to put together a report and I am using tables to help keep my data in line. My data is free text and would like to footnote certain data as to it origin, but footnoting is grey-out. How can I footnote on table mod

I am using pages '09. I have been trying to put together a report and I am using tables to help keep my data in line. My data is free text and would like to footnote certain data as to it origin, but footnoting is grey-out. How can I footnote in table mode inpages '09?

Footnotes can only be inserted in the main text area between the margins on a Word Processing document.
Peter

Enhancement request : Table - Data -- Filter with multiple lines

It would be nice when the Filter option in the tables Data tab could contain multiple lines, because :
In case of a complex where clause on a table (used in a query) it's hard to get an impression of the filter because everything is typed on one single line.
In case of multiple lines it's also more easy to disable a single clause temporary with a double dash (--) at the start of the line instead of searching in a complex filter where to put /* ...*/
Eric.

What I mean is the Filter option when displaying the data (Data tab) of a table. You have the possibility to enter a Sort and a Filter (to reduce the data that is displayed). That Filter option has no possibility to enter multiple lines. So there is no way to 'format' the filter which would be nice in case of complex or large 'where clauses'.
What would you prefer, this (multiple lines) ?
AND ( p_peildatum IS NULL
OR
TRUNC(p_peildatum) BETWEEN TRUNC(dnm.datum_ingang)
AND TRUNC(NVL(dnm.datum_einde,p_peildatum))
AND ( p_ondergrens IS NULL
OR
TRUNC(p_ondergrens) <= TRUNC(NVL(dnm.datum_einde,p_ondergrens))
or this, like it is now (everything on one single line) :
( p_peildatum IS NULL OR TRUNC(p_peildatum) BETWEEN TRUNC(dnm.datum_ingang) AND TRUNC(NVL(dnm.datum_einde,p_peildatum)) ) AND ( p_ondergrens IS NULL OR TRUNC(p_ondergrens) <= TRUNC(NVL(dnm.datum_einde,p_ondergrens)) )
Eric.

Table partition based multiple date columns

Hi , I am using Oracle 10G db. One of the source table has 26 million rows. Partition is based on business send date(Quaterly). Now the query that used to load the target table is based on ETL load date. Since the load date is not the partition column,the source query is taking long time to fetch.Can someone please suggest how to include ETL load date in the partition column or if any other way to improve the performance of the source query will be greatly appreciated.Thanks

Partition is based on business send date(Quaterly).
Can someone please suggest how to include ETL load date in the partition column
Technically? Sure - just redefine the table (DBMS_REDEFINITION) and partition it on ETL load data.
But someone partitioned on 'send date' for a reason didn't they? Don't you think you might want to find out WHY before you even think about changing it?
The only info you have provided so far is that someone 'thinks' that a single query is 'taking long time to fetch'. That doesn't even mean anything. What is 'long time': 5 seconds, 5 days? How many rows are being fetched out of 26 million: 1, 20 million?
1. post the table and index DDL
2. post the query and execution plan
3. post the command you executed to produce the stats on the table and indexes
4. post the number of rows for the query predicates
5. post info about the number of rows in the result set and what you are doing with them

Is it possible to get the updated table records based on date & time.

Is it possible to get the updated table records based on date & time in oracle.
Thanks in advance.

no, actually i am asking update records using 'UPDATE
or DELETE' statement, but not insert statement.
Is it possible?
I think we can do using trigger on table, but problem
is if i am having 20 tables means i have to write 20
trigger. i don't want like this.Of course it's still possible, typically you'll find applications with a column LAST_UPDATE, probably a LAST_UPDATED_BY and so on column. You don't say what your business need is, if you just want a one of query of updates to particular records and have a recent version of Oracle, then flashback query may well help, if you want to record update timestamps you either have to modify the table, or write some code to store your updates in an audit table somewhere.
Niall Litchfield
http://www.orawin.info/

Problem converting data in XML file to internal table data

Hi all,
I have a requirement. I need to convert an XML file to internal table data and based on that data do Goods Receipt in SAP.
With the help of this blog /people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I am able to convert the XML file to data in SAP. But this blog will display the output on screen as ELELEMNT = nodename VALUE= value of that node.
But I donu2019t want in that way, I want to store all the data in XML file in an internal table so that I can make use of those values and do Goods Recipt in SAP.
Can some one suggest how should I read the data in an internal table.
Here is my code..what changes should I make?
*& Report z_xit_xml_check
REPORT z_xit_xml_check.
TYPE-POOLS: ixml.
TYPES: BEGIN OF t_xml_line,
 data(256) TYPE x,
 END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
 l_streamfactory TYPE REF TO if_ixml_stream_factory,
 l_parser TYPE REF TO if_ixml_parser,
 l_istream TYPE REF TO if_ixml_istream,
 l_document TYPE REF TO if_ixml_document,
 l_node TYPE REF TO if_ixml_node,
 l_xmldata TYPE string.
DATA: l_elem TYPE REF TO if_ixml_element,
 l_root_node TYPE REF TO if_ixml_node,
 l_next_node TYPE REF TO if_ixml_node,
 l_name TYPE string,
 l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line,
 l_xml_line TYPE t_xml_line,
 l_xml_table_size TYPE i.
DATA: l_filename TYPE string.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'c:\temp\orders_dtd.xml'.
Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
START-OF-SELECTION.
Creating the main iXML factory
 l_ixml = cl_ixml=>create( ).
Creating a stream factory
 l_streamfactory = l_ixml->create_stream_factory( ).
 PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
wrap the table containing the file into a stream
 l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
 size = l_xml_table_size ).
Creating a document
 l_document = l_ixml->create_document( ).
Create a Parser
 l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
 istream = l_istream
 document = l_document ).
Validate a document
 IF pa_val EQ 'X'.
 l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
 ENDIF.
Parse the stream
 IF l_parser->parse( ) NE 0.
 IF l_parser->num_errors( ) NE 0.
 DATA: parseerror TYPE REF TO if_ixml_parse_error,
 str TYPE string,
 i TYPE i,
 count TYPE i,
 index TYPE i.
 count = l_parser->num_errors( ).
 WRITE: count, ' parse errors have occured:'.
 index = 0.
 WHILE index < count.
 parseerror = l_parser->get_error( index = index ).
 i = parseerror->get_line( ).
 WRITE: 'line: ', i.
 i = parseerror->get_column( ).
 WRITE: 'column: ', i.
 str = parseerror->get_reason( ).
 WRITE: str.
 index = index + 1.
 ENDWHILE.
 ENDIF.
 ENDIF.
Process the document
 IF l_parser->is_dom_generating( ) EQ 'X'.
 PERFORM process_dom USING l_document.
 ENDIF.
*& Form get_xml_table
FORM get_xml_table CHANGING l_xml_table_size TYPE i
 l_xml_table TYPE STANDARD TABLE.
Local variable declaration
 DATA: l_len TYPE i,
 l_len2 TYPE i,
 l_tab TYPE tsfixml,
 l_content TYPE string,
 l_str1 TYPE string,
 c_conv TYPE REF TO cl_abap_conv_in_ce,
 l_itab TYPE TABLE OF string.
 l_filename = pa_file.
upload a file from the client's workstation
 CALL METHOD cl_gui_frontend_services=>gui_upload
 EXPORTING
 filename = l_filename
 filetype = 'BIN'
 IMPORTING
 filelength = l_xml_table_size
 CHANGING
 data_tab = l_xml_table
 EXCEPTIONS
 OTHERS = 19.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
Writing the XML document to the screen
 CLEAR l_str1.
 LOOP AT l_xml_table INTO l_xml_line.
 c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement = space ).
 c_conv->read( IMPORTING data = l_content len = l_len ).
 CONCATENATE l_str1 l_content INTO l_str1.
 ENDLOOP.
 l_str1 = l_str1+0(l_xml_table_size).
 SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
 WRITE: /.
 WRITE: /' XML File'.
 WRITE: /.
 LOOP AT l_itab INTO l_str1.
 REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
 l_str1 WITH space.
 WRITE: / l_str1.
 ENDLOOP.
 WRITE: /.
ENDFORM. "get_xml_table
*& Form process_dom
FORM process_dom USING document TYPE REF TO if_ixml_document.
 DATA: node TYPE REF TO if_ixml_node,
 iterator TYPE REF TO if_ixml_node_iterator,
 nodemap TYPE REF TO if_ixml_named_node_map,
 attr TYPE REF TO if_ixml_node,
 name TYPE string,
 prefix TYPE string,
 value TYPE string,
 indent TYPE i,
 count TYPE i,
 index TYPE i.
 node ?= document.
 CHECK NOT node IS INITIAL.
 ULINE.
 WRITE: /.
 WRITE: /' DOM-TREE'.
 WRITE: /.
 IF node IS INITIAL. EXIT. ENDIF.
create a node iterator
 iterator = node->create_iterator( ).
get current node
 node = iterator->get_next( ).
loop over all nodes
 WHILE NOT node IS INITIAL.
 indent = node->get_height( ) * 2.
 indent = indent + 20.
 CASE node->get_type( ).
 WHEN if_ixml_node=>co_node_element.
 element node
 name = node->get_name( ).
 nodemap = node->get_attributes( ).
 WRITE: / 'ELEMENT :'.
 WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
 IF NOT nodemap IS INITIAL.
 attributes
 count = nodemap->get_length( ).
 DO count TIMES.
 index = sy-index - 1.
 attr = nodemap->get_item( index ).
 name = attr->get_name( ).
 prefix = attr->get_namespace_prefix( ).
 value = attr->get_value( ).
 WRITE: / 'ATTRIBUTE:'.
 WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
 value COLOR COL_TOTAL INVERSE.
 ENDDO.
 ENDIF.
 WHEN if_ixml_node=>co_node_text OR
 if_ixml_node=>co_node_cdata_section.
 text node
 value = node->get_value( ).
 WRITE: / 'VALUE :'.
 WRITE: AT indent value COLOR COL_GROUP INVERSE.
 ENDCASE.
 advance to next node
 node = iterator->get_next( ).
 ENDWHILE.
ENDFORM. "process_dom
Any help would be highly apperciated.
regards,
Jessica Sam

Pavel Vera,
With your example i tries doing the following .....
I tried to convert the data of XML file to internal table data. I am collecting the data in internal table to do goos recipt with that data.
Please find my XML file, ABAP pgm and XSLT pgm . I donu2019t know what I am missing I am not getting any output. I donu2019t know what is wrong please help me with this
Below is my XML file, My code and XSLT Program. In the below XML file I need to collect Vendor Number, Order Number, and Date tags which occur only once for one XML file.
I also need to collect the following tags from <Shipmentdetail>
<Shipmentdetail> has following child nodes and I need to collect them
TrackingNumber
Freight
Weight
ShipmentDate
ShipmentMethod
Need to collect to collect the following tags from <ProductInformation>
<ProductInformation> has following child nodes and I need to collect them
 LineNumber
 SKUNumber
 OrderedQuantity
 ShippedQuantity
 UOM
The <Shipmentdetail> and <ProductInformation> are child nodes of <OrderShipment>
The <Shipmentdetail> occurs only ones but the <ProductInformation> can occur once or many times and will be dynamic and differs depening on the input file.
My XML file is as follows
<?xml version="1.0" encoding="iso-8859-1" ?>
- <ShipmentHeader>
<AccountID />
- <OrderShipment>
 <VendorNumber>1000</VendorNumber>
 <OrderNumber>P00009238</OrderNumber>
 <OrderType>Stock</OrderType>
 <Company />
 <Division />
 <Department />
 <Date>20061120</Date>
 <CartonCount>2</CartonCount>
 <ShipAllProducts>No</ShipAllProducts>
- <ShipmentDetail>
 <TrackingNumber>1ZR3W891PG47477811</TrackingNumber>
 <Freight>000000010000</Freight>
 <ShipmentDate>20061120</ShipmentDate>
 <ShipmentMethod>UPS1PS</ShipmentMethod>
 </ShipmentDetail>
- <ProductInformation>
 <LineNumber>000000001</LineNumber>
 <SKUNumber>110FR</SKUNumber>
 <AdvSKUNumber>003 4518</AdvSKUNumber>
 <SKUID />
 <OrderedQuantity>00000001000000</OrderedQuantity>
 <ShippedQuantity>00000001000000</ShippedQuantity>
 <UOM>EA</UOM>
 <Factor>1</Factor>
 </ProductInformation>
- <ProductInformation>
 <LineNumber>000000002</LineNumber>
 <SKUNumber>938EN</SKUNumber>
 <AdvSKUNumber>001 7294</AdvSKUNumber>
 <SKUID />
 <OrderedQuantity>00000000450000</OrderedQuantity>
 <ShippedQuantity>00000000450000</ShippedQuantity>
 <UOM>EA</UOM>
 <Factor>1</Factor>
 </ProductInformation>
- <CaseInformation>
 <LineNumber>000000001</LineNumber>
 <SKUNumber>110FR</SKUNumber>
 <AdvSKUNumber>003 4518</AdvSKUNumber>
 <SKUID />
 <SSCCNumber>00000001668000002487</SSCCNumber>
 <CaseQuantity>00000001000000</CaseQuantity>
 <UOM>EA</UOM>
 <Factor>1</Factor>
 </CaseInformation>
 <CaseInformation>
 <LineNumber>000000001</LineNumber>
 <SKUNumber>110FR</SKUNumber>
 <AdvSKUNumber>003 4518</AdvSKUNumber>
 <SKUID />
 <SSCCNumber>00000001668000002487</SSCCNumber>
 <CaseQuantity>00000001000000</CaseQuantity>
 <UOM>EA</UOM>
 <Factor>1</Factor>
 </CaseInformation>
- </OrderShipment>
</ShipmentHeader>
My Program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\temp\test.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ts_shipment,
 VendorNumber(10) TYPE n,
 OrderNumber(20) TYPE n,
 OrderType(8) TYPE c,
 Date(8) TYPE c,
 END OF ts_shipment.
TYPES: BEGIN OF ts_shipmentdetail,
 TrackingNumber(30) TYPE n,
 Freight(12) TYPE n,
 Weight(14) TYPE n,
 ShipmentDate(8) TYPE c,
 ShipmentMethod(8) TYPE c,
 END OF ts_shipmentdetail.
TYPES: BEGIN OF ts_productinformation,
 LineNumber(9) TYPE n,
 SKUNumber(20) TYPE c,
 OrderedQuantity(14) TYPE n,
 ShippedQuantity(14) TYPE n,
 UOM(4) TYPE c,
 END OF ts_productinformation.
* Table for the XML content
DATA: gt_itab TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_shipment TYPE STANDARD TABLE OF ts_shipment,
 gs_shipment TYPE ts_shipment.
DATA: gt_shipmentdetail TYPE STANDARD TABLE OF ts_shipmentdetail,
 gs_shipmentdetail TYPE ts_shipmentdetail.
DATA: gt_productinformation TYPE STANDARD TABLE OF ts_productinformation,
 gs_productinformation TYPE ts_productinformation.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
 gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex TYPE REF TO cx_root,
 gs_var_text TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
 filename = gs_file
CHANGING
 data_tab = gt_itab
EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 not_supported_by_gui = 17
 error_no_gui = 18
 OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPMENT".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPMENT'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPDET".
GET REFERENCE OF gt_shipmentdetail INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPDET'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPRODDET".
GET REFERENCE OF gt_productinformation INTO gs_result_xml-value.
gs_result_xml-name = 'IPRODDET'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
 CALL TRANSFORMATION z_xml_to_abap3
 SOURCE XML gt_itab
 RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
 gs_var_text = gs_rif_ex->get_text( ).
 MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Writing the data from file for gt_shipment
*Collecting the Shipping Data from the XML file to internal table gt_shipment
*and writing the data to the screen
LOOP AT gt_shipment INTO gs_shipment.
WRITE: / 'VendorNumber:', gs_shipment-VendorNumber.
WRITE: / 'OrderNumber :', gs_shipment-OrderNumber.
WRITE: / 'OrderType :', gs_shipment-OrderType.
WRITE: / 'Date :', gs_shipment-Date.
WRITE : /.
ENDLOOP. "gt_shipment.
LOOP AT gt_shipmentdetail INTO gs_shipmentdetail.
WRITE: / 'TrackingNumber:', gs_shipmentdetail-TrackingNumber.
WRITE: / 'Freight :', gs_shipmentdetail-Freight.
WRITE: / 'Weight :', gs_shipmentdetail-Weight.
WRITE: / 'ShipmentDate :', gs_shipmentdetail-ShipmentDate.
* WRITE: / 'ShipmentMethod :' gs_shipmentdetail-ShipmentMethod
WRITE : /.
ENDLOOP. "gt_shipmentdetail.
LOOP AT gt_productinformation INTO gs_productinformation.
WRITE: / 'LineNumber:', gs_productinformation-LineNumber.
WRITE: / 'SKUNumber :', gs_productinformation-SKUNumber.
WRITE: / 'OrderedQuantity :', gs_productinformation-OrderedQuantity.
WRITE: / 'ShippedQuantity :', gs_productinformation-ShippedQuantity.
WRITE: / 'UOM :', gs_productinformation-UOM.
WRITE : /.
ENDLOOP. "gt_productinformation.
XSLT Program
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <asx:values>
 <ISHIPMENT>
 <xsl:apply-templates select="//OrderShipment"/>
 </ISHIPMENT>
 </asx:values>
 </asx:abap>
</xsl:template>
<xsl:template match="OrderShipment">
 <item>
 <VENDORNUMBER>
 <xsl:value-of select="VendorNumber"/>
 </VENDORNUMBER>
 <ORDERNUMBER>
 <xsl:value-of select="OrderNumber"/>
 </ORDERNUMBER>
 <ORDERTYPE>
 <xsl:value-of select="OrderType"/>
 </ORDERTYPE>
 <DATE>
 <xsl:value-of select="Date"/>
 </DATE>
 </item>
</xsl:template>
<xsl:template match="/">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <asx:values>
 <ISHIPDET>
 <xsl:apply-templates select="//OrderShipment/ShipmentDetail"/>
 </ISHIPDET>
 </asx:values>
 </asx:abap>
</xsl:template>
<xsl:template match="ShipmentDetail">
 <item>
 <TRACKINGNUMBER>
 <xsl:value-of select="TrackingNumber"/>
 </TRACKINGNUMBER>
 <FREIGHT>
 <xsl:value-of select="Freight"/>
 </FREIGHT>
 <SHIPMENTDATE>
 <xsl:value-of select="ShipmentDate"/>
 </SHIPMENTDATE>
 <SHIPMENTMETHOD>
 <xsl:value-of select="ShipmentMethod"/>
 </SHIPMENTMETHOD>
 </item>
</xsl:template>
</xsl:transform> .
Any help is highly appreciated. If anyone encountered this situation before please let me know where i am going wrong in my XSLT transformation.
Any Help will be highly apppreciated. Thanks in advance
Regards,
Jessica Sam

ABAP Code for Backup the entire table data in the application server

Hello Friends,
I have to create the table data Backup and Store the entire table data in the application server and also be able to restore the data back if needed.
this should be dynamic program for any table based on the table name given on the application server.. I have developed a program for this but its having problems with the Quantity, amount. Its not writing it correctly at the application level.
ANy Suggestions on this.
Below is the program for this.
Thanks,
Ster.
* Report YWMM_TABLE_DUMP *
REPORT ywmm_table_dump .
TABLES :
 dd03l.
* Type spool declaration
TYPE-POOLS:
 abap, slis.
DATA: i_table_data1 TYPE REF TO data.
DATA : it_dd03l LIKE dd03l OCCURS 0 WITH HEADER LINE.
*DATA : gt_fieldcat TYPE lvc_s_fcat.
DATA : i_fcat TYPE STANDARD TABLE OF lvc_s_fcat,
 l_dr_line TYPE REF TO data,
 l_v_as4vers TYPE as4vers.
FIELD-SYMBOLS: <f_table_data1> TYPE STANDARD TABLE,
 <f_wa_table_data1> TYPE ANY.
SELECTION-SCREEN: BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
PARAMETERS: rb_copy RADIOBUTTON GROUP map DEFAULT 'X',
 rb_rest RADIOBUTTON GROUP map.
SELECTION-SCREEN: END OF BLOCK bl1.
SELECTION-SCREEN: BEGIN OF BLOCK bl2 WITH FRAME TITLE text-002.
PARAMETERS: p_table TYPE tabname OBLIGATORY,
 p_plfld TYPE dd03l-fieldname.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_bkfile TYPE localfile OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK bl2.
PERFORM get_data.
IF rb_copy = 'X'.
PERFORM backup.
ELSEIF rb_rest = 'X'.
PERFORM database_update.
ENDIF.
*& Form get_data
FORM get_data.
CLEAR i_fcat.
REFRESH i_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
 i_structure_name = p_table " Table Name
 CHANGING
 ct_fieldcat = i_fcat
 EXCEPTIONS
 OTHERS = 1.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
 it_fieldcatalog = i_fcat
IMPORTING
 ep_table = i_table_data1.
IF sy-subrc = 0.
 ASSIGN i_table_data1->* TO <f_table_data1>.
ELSE.
 WRITE: 'Error creating internal table'.
ENDIF.
IF rb_copy = 'X'.
 SELECT * FROM (p_table) INTO CORRESPONDING FIELDS OF
 TABLE <f_table_data1> UP TO 20 ROWS.
ELSEIF rb_rest = 'X'.
 CREATE DATA l_dr_line LIKE LINE OF <f_table_data1>.
 ASSIGN l_dr_line->* TO <f_wa_table_data1>.
*Get Data from Application Server
* Opening the dataset P_BKFILE given in the selection screen
 TRANSLATE p_bkfile TO LOWER CASE.
 OPEN DATASET p_bkfile FOR INPUT IN TEXT MODE." ENCODING DEFAULT.
 IF sy-subrc NE 0.
* MESSAGE:
 ELSE.
 DO.
* Reading the file from application server
 READ DATASET p_bkfile INTO <f_wa_table_data1>.
 IF sy-subrc = 0.
 APPEND <f_wa_table_data1> TO <f_table_data1>.
 ELSE.
 EXIT.
 ENDIF.
 ENDDO.
* Closing the dataset
 CLOSE DATASET p_bkfile.
 ENDIF.
ENDIF.
ENDFORM. " get_data
*& Form backup
* text
* --> p1 text
* <-- p2 text
FORM backup.
TRANSLATE p_bkfile TO LOWER CASE.
OPEN DATASET p_bkfile FOR OUTPUT IN TEXT MODE.
IF sy-subrc NE 0.
 WRITE: text-017.
 STOP.
ELSE.
 LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
 TRANSFER <f_wa_table_data1> TO p_bkfile.
 ENDLOOP.
ENDIF.
CLOSE DATASET p_bkfile.
ENDFORM. " backup
*& Form database_update
FORM database_update.
DATA : i_mara_u TYPE STANDARD TABLE OF mara WITH HEADER LINE,
 i_ekpo_u TYPE STANDARD TABLE OF ekpo WITH HEADER LINE,
 i_eban_u TYPE STANDARD TABLE OF eban WITH HEADER LINE,
 i_resb_u TYPE STANDARD TABLE OF resb WITH HEADER LINE,
 i_plpo_u TYPE STANDARD TABLE OF plpo WITH HEADER LINE,
 i_stpo_u TYPE STANDARD TABLE OF stpo WITH HEADER LINE,
 i_vbap_u TYPE STANDARD TABLE OF vbap WITH HEADER LINE,
 i_vbrp_u TYPE STANDARD TABLE OF vbrp WITH HEADER LINE,
 i_lips_u TYPE STANDARD TABLE OF lips WITH HEADER LINE,
 i_afvc_u TYPE STANDARD TABLE OF afvc WITH HEADER LINE,
 i_asmd_u TYPE STANDARD TABLE OF asmd WITH HEADER LINE,
* i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
 i_qmel_u TYPE STANDARD TABLE OF qmel WITH HEADER LINE,
 i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
 i_esll_u TYPE STANDARD TABLE OF esll WITH HEADER LINE,
 i_t165_u TYPE STANDARD TABLE OF t165 WITH HEADER LINE,
 i_t165e_u TYPE STANDARD TABLE OF t165e WITH HEADER LINE,
 i_twpko_u TYPE STANDARD TABLE OF twpko WITH HEADER LINE,
 i_tpext_u TYPE STANDARD TABLE OF tpext WITH HEADER LINE,
 i_ce4mxpa_u TYPE STANDARD TABLE OF ce4mxpa WITH HEADER LINE,
 i_ce4mxpa_acct_u TYPE STANDARD TABLE OF ce4mxpa_acct WITH
 HEADER LINE,
 i_zaim_u TYPE STANDARD TABLE OF zaim WITH HEADER LINE,
 i_s012_d TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
 i_s012_i TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
 i_dummy TYPE STANDARD TABLE OF mara.
CASE p_table.
 WHEN 'MARA'.
* Non-Key
 PERFORM move_to_table USING <f_table_data1>
 CHANGING i_mara_u[]
 i_mara_u.
 PERFORM update_table USING i_mara_u[].
ENDCASE.
ENDFORM. " database_update
*& Form move_to_mara
FORM move_to_table USING p_tab_from TYPE STANDARD TABLE
 CHANGING p_tab_to TYPE STANDARD TABLE
 p_w_table.
DATA: l_wa_fcat TYPE lvc_s_fcat.
FIELD-SYMBOLS: <f_field_from> TYPE ANY,
 <f_field_to> TYPE ANY.
LOOP AT p_tab_from ASSIGNING <f_wa_table_data1>.
 LOOP AT i_fcat INTO l_wa_fcat.
 ASSIGN COMPONENT l_wa_fcat-fieldname
 OF STRUCTURE <f_wa_table_data1> TO <f_field_from>.
 ASSIGN COMPONENT l_wa_fcat-fieldname
 OF STRUCTURE p_w_table TO <f_field_to>.
 <f_field_to> = <f_field_from>.
 ENDLOOP.
 APPEND p_w_table TO p_tab_to.
ENDLOOP.
ENDFORM. " move_to_mara
*& Form update_table
FORM update_table USING p_table_update TYPE STANDARD TABLE.
SELECT SINGLE *
 FROM dd03l
 WHERE fieldname = p_plfld
 AND tabname = p_table
 AND keyflag <> 'X'
 AND as4local = 'A'
 AND as4vers = l_v_as4vers
 AND ( comptype = 'E' OR comptype = space ).
IF sy-subrc = 0.
* Do update
 IF NOT p_table_update IS INITIAL.
 UPDATE (p_table) FROM TABLE p_table_update.
 IF sy-subrc = 0.
 COMMIT WORK.
 ELSE.
 ROLLBACK WORK.
 WRITE: text-003.
 STOP.
 ENDIF.
 ENDIF.
ELSE.
*delete and insert.
 IF NOT p_table_update IS INITIAL.
* DELETE (p_table).
 IF sy-subrc = 0.
 INSERT (p_table) FROM TABLE p_table_update.
 IF sy-subrc = 0.
 COMMIT WORK.
 ELSE.
 ROLLBACK WORK.
 WRITE: text-018.
 STOP.
 ENDIF.
 ELSE.
 ROLLBACK WORK.
 WRITE: text-018.
 STOP.
 ENDIF.
 ENDIF.
ENDIF.
ENDFORM. " update_table
Edited by: Julius Bussche on Jul 18, 2008 1:43 PM
Please use a meaningfull subject title!

ARS,
I am struggling a bit to get this.
there is a syntax error,
Field "FIELDS_INT-TYPE" is unknown. It is neither in one of thespecified tables nor defined by a "DATA" statement.
Again you have asked to move to a diffrent table. What is that table and how to build it.
 LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
 LOOP AT i_fcat INTO l_fcat.
 IF l_fcat-inttype EQ 'P'.
 ASSIGN COMPONENT l_fcat-fieldname
 OF STRUCTURE <f_wa_table_data1> TO <f_field>
 TYPE fields_int-type
 DECIMALS fields_int-decimals.
 ELSE.
 ASSIGN COMPONENT l_fcat-fieldname
 OF STRUCTURE <f_wa_table_data1> TO <f_field>
 TYPE fields_int-type.
 ENDIF.
 " Move <f_field> to a new table and use this table for download
 ENDLOOP.
 TRANSFER <f_wa_table_data1> TO p_bkfile.
 ENDLOOP.
Ster

Not able to view more than two line in table control

Hi all,
I am not able to see more than two lines in table control. Although my table control height is 21...
Please see attached pic and suggest me what to do.

hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

Function Module to read EDIDC table data.

Dear All,
I am retrieving data from EDIDC table depending upon the creation date and message type. But it is consuming a lot time and hence while going for more than one month data , it gives run time error.
I found while going through debugger that maximum time is consumed by the SELECT query in retrieving the EDIDC data.
Is there any Function Module for retrieving EDIDC table data.
If so kindly let me know.

How can a fm replace this performance issue ? You have only two fields to be passed such as creation date and message type.
For the table EDIDC there is a secondary index 3 for message type. Did you use that ? What is your query written ?
If you look into the standard report RSEIDOC2, the field for creation date used is UPDDAT. It implies usage of secondary index 2
Refer line no 114
Regards
Kesav

Dynamically Update External Table Data

I loaded a data table from an external csv file. But the csv file is an output from a program that appends a new line to the csv file every couple days.
I made a Report with the loaded data, but in a couple days when a few new lines of data appear in the csv file, I want my report to update as well.
Is there a way to create a "Refresh Button" in my application that will load the data from the csv when pressed?
I have oracle database 11g express with APEX 4.1.1

Hi,
what you describe could certainly be achieved, but it would have to be designed and built, it is not going to be provided "out of the box". I would probably go with an external table based on your file and a process that you would build would be callable from the button and this would do some sort of a merge of the external table data into your database table. Apart from being callable on demand, the process could also be made to be a scheduled process that loads the data on a regular basis, say once a day or once an hour, depending on your requirements. To use an external table it is assumed that the file will be available on the database server. If not and the file is available on only a client machine, then doing an on demand load process would still be possible, but a little more difficult.
Andre

How to display table data without using ALV and table element.

Hi,
        Its possible to display table data without using ALV and table element.
       Every time i am fetching data based on (customer,status) fields and displaying these data in my output using alv
       (every time i am fetching single row data ),
       But problem is alv occupying more space in the output , i want to display data part only i dont want field names,
       settings and header data etc..things.
      Give solution to display data part..
Regards,
Rakhi.

Hi,
Does you mean that you need ALV without default Function Toolbar...? If this is the case, the easy solution would have been to use Table Element rather. But, if you need to use ALV only without Function Toolbar, you can do away with that as well.
In that case, after calling GET_MODEL, you need to add few more lines of codes to achieve your goal. Those lines are --
DATA LV_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
    LV_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
* Standard Filter Function setting to FALSE
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_FILTERLINE_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_DISPLAY_SETTINGS_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_HEADERCLICK_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_HIERARCHY_ALLOWED( ABAP_FALSE ).
* Standard Filter Function setting to FALSE Ends
Here as you can easily notice that LV_VALUE is instantiated on CL_SALV_WD_CONFIG_TABLE. Now, using this LV_VALUE, you set standard functions as False to dis-allow their display.
Hope this answers your query.
Thanks.
Kumar Saurav.

Isolating lines of table Data based on maximum date

Similar Messages

Maybe you are looking for