Which all tables suffice all line item GL data requirements

Please clarify this requirement for Line Item Data from New GL. my client BMW Inc have configured New GL in ECC 6.0 if i pull all the records to BW from FAGLFLEXA (Line Item Table) is that sufficient to meet the <b>all line item GL data</b> or is there any other tables missing that also shall be combined to bring the Line item GL data. Please help me for this if u can check with any of your friends in FICO.
2. I have seen that BSEG AND BKPF are used earlier in old FI versions so what is there now in New GL ECC 6.0 that will suffice for these BSEG AND BKPF or still i have to pull records by using these tables. for GL Line Item Data.
If you can help me to give the short overview of New GL posting process it would be great.
Thanks
Regards
Soniya Kapoor

Hi Soniya,
FAGLFLEXA & FAGLFLEXT would contain all FI line item
http://help.sap.com/saphelp_erp2005vp/helpdata/en/a8/e26840b151181ce10000000a1550b0/content.htm
Pls assign points as way to say thanks

Similar Messages

Additional table in MA line item

All,
We have a requirement to add an additional table in the line items / line items terms of a master agreement.
The table should have a condition type, currency and vendor fields.
I see that the line item cannot be extended.
I cannot use the line item specifications because of the multiple fields needed (not just an attribute and its value).
Is there a way I can achieve this?
Regards,
Subhasini

Hi
You can create a new collection for line items hiding the standard line item collection wherein you can modify the fields as desired.
Regards
Mudit Saini

Table for GL line items.

Hi ,
Can anybody tell me what is the table for GL line items in R3 side.
Regards,

Thanks Voodi and Roberto,
Actually I am in need of following.
I need to take all fields from 0FI_AR_3 DS and Additional fields as follows.
Profit centre
Net Due date
FI Document number
Document line number
End customer country code
Group currency (USD)
customer no
End customer country
document no
line item
Note: Only pull in AR documents into the structure that have status of OPEN.
Can I find out all these fields from both these tables?
Regards,

How to upload a file which has more than 999 line item through BDC ?

Hello Techards
Hi to all
Can any body tell me how to upload a file which has more than 999 line item through BDC for traction F-02 ?
Thanks in advance.
Shovan

Hello Shovan,
You split it up to post two accounting documents with the help of a "suspense" a/c.
Say, you have to post the following line items below:
line 1 - dr. - GL a/c X - $1000
line 2 - cr. - GL a/c Y - $1
line 3 - cr. - GL a/c Y - $1
line 1001 - cr. - GL a/c Y - $1
You cannot post the above as a single doc in SAP (because of technical reasons), so you need to break it up into 2 documents as below:
Doc1
line 1 - dr - GL a/c X - $1000
line 2 - cr - GL a/c Y - $1
line 3 - cr - GL a/c Y - $1
line 998 - cr - GL a/c Y - $1
line 999 - cr - SUSPENSE a/c - $3
Doc2
line 1 - dr - SUSPENSE a/c - $3
line 2 - cr - GL a/c Y - $3
Note that there is no incorrect impact on accounting as first we credit suspense a/c by $3 and next we debit the same suspense a/c by $3 as a result the effect is nil. Similarly, we credit $997 to GL a/c Y (which is less by $3) in the first doc which is compensated by the second doc by crediting the shortfall of $3.
Hope this helps,
Cheers,
Sougata.

Error Handling in table control for line item.

Hi,
Please how to do error handling in table control for line item in bdc,i have used format_message for header but i don't no fill decamps internal tabled and how to do background processing in call transaction.
Thanks

Background processing is not possible using call transaction method.
You can create an executable program which can have CALL TRANSACTION BDC code. And this can be run in background.
What do you exactly mean by Error handling for Items in table control. Can you give some more details.

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

Purchase Order Line Item Creation DATE ?

Hi All ,
How can we fine the Line item creation date in PO ? I know EKPO-AEDAT but that is chaged date and its get updated if you chage the line Item after creating it . I need creation date for a perticular Line Item how can we get that ?. thanks in advance , I'll reward if useful.
Thanks ,
Lucky.

Item creation is same as Order date of schedule line
EKET-BEDAT
Thanks
Seshu

Getting all documents(and their line items) on basis of a vendor r customer

Hello to all,
I have made a report which takes a range of document dates and querys the bkpf on the basis of bldat(and query bseg on basis of the retrieved belnr). Now want i need is to add another selection(lifnr in case of vendor and kunnr in case of customer) so that if i want to see a particular vendor or customer, i can see only those record(line items).
i tried querying the bseg on basis of lifnr , but i get only those line items (vendor line item or customer line items)
i want all the line items..
How to do it ?
Help needed..Thanks..
Shehryar

Hey,
Accounting document data is stored in the below tables:
BKPF - Header
BSEG - Line Item: GL/Customer/Vendor
BSID/BSAD - Open/Cleared Customer Items
BSIK/BSAK - Open/Cleared Vendor Items
BSIS/BSAS - Open/Cleared GL Items
Follow the logic below:
For Vendors:
Select (BELNR) data from BKPF based on BLDAT
Select data from BSIK and BSAK where BELNR = (BELNR in Step 1) and LIFNR = (User Input)
Select data from BSIS and BSAS where BELNR = (BELNR in Step 2)
For Customers:
Select (BELNR) data from BKPF based on BLDAT
Select data from BSID and BSAD where BELNR = (BELNR in Step 1) and LIFNR = (User Input)
Select data from BSIS and BSAS where BELNR = (BELNR in Step 2)
-Kiran
*Please reward useful answers

Query to get all General Ledger: Actual Line Items

Hello All,
I am developing a cash flow report. for this I write a query on FAGLFLEXA table but in my system business area is not mation in FAGLFLEXA table becouse customization is not done.
so i want to use other table where i get Business are, company code, year and period.
so can anybuddy send the query from i get all actual line items
so can you help me...
thanks in adv.
Kaustubh

Hello Balu Latpate
Thanks for u r reply
but their is no entries in the GLPCT and GLPCA

Printing line only after all the records of line item are finished

HI
I have the following table :
FieldA   FieldC       FieldD
10           1               CM
10           3               CCM
20           6               M
Right now i am able to print in samrtform like this
FieldA   FieldC       FieldD
10           1               CM
               3              CCM
20           6               M
My requirement is this:
FieldA   FieldC       FieldD
10           1               CM
               3              CCM
20           6               M
How can I do it?

hi,
when you work with smartforms, you can do this
1. declare under the tab "Table" of your table-element, 2 lines with the same structure (1 linetype with the line under it, and 1 linetype without the underlining)
2. under the tab "Data", at the Sort-criteria, sort on FieldA and mark the check-box "Event on Sort End"
3. In your main-area you can use the linetype without the underlining
4. In the area that is created for the event "on Sort End", you use the linetype with the underlining
kind regards
Tom

Gurus...Need help....extract data from BKPF header table and BSEG line item

Gurus,
I have to write the logic to fetch data from bkpf and bseg. Need help on how can i do that..
I have to get bukrs belnr gjahr ldgrp from BKPF for a given date and company code. For all these documents, then i have to get the line items from BSEG if the ldgrp is I1 or SPACE.
If the ldgrp is not I1 or SPACE then i have to fetch the records from BSEG_ADD and then generate a ALV report with all the data including the data that was fetched from BKPF.
So, it wil be a combined ALV report that displays header as well as LINE item data together...
Can u please help me with the code...I am not sure how can everything go all together in one internal table....Becoz once its there in one table then only a ALV list can be generated.......
Cheers:
Sam

hi Sam, this may be of some similar thing.
Use this program, I got this prog from a source and we added a small conditional check in the program which checks document numbers in BSEG and also comapres in BKPF and sees if the output from BSEG falls under the posting data range specified in the initial selection.
Now just so you know, this output is kinda messed up, so you will have to play with it in Excel to extract the document numbers, if that is what you want.
============================
PROGRAM....... ZFI_BSEG_DOWNLOAD
TITLE......... Download BSEG
PROGRAM TYPE.. Download
======================================================================
GENERAL DOCUMENTATION AND COMMENTS
<...>
======================================================================
ASSOCIATED PROGRAMS
<Program>..... <Description>
======================================================================
CHANGE HISTORY
Date By Ticket Description
REPORT zfi_bseg_download.
TABLES: bseg, bkpf.
TYPES: BEGIN OF ty_output,
line(6000) TYPE c,
END OF ty_output.
TYPES: ty_tab_output TYPE TABLE OF ty_output,
ty_tab_nametab TYPE TABLE OF x031l.
CONSTANTS: c_delimiter(04) TYPE c VALUE '"%%"',
c_records TYPE i VALUE 10000.
SELECTION-SCREEN
SELECT-OPTIONS: p_bukrs FOR bseg-bukrs,
p_belnr FOR bseg-belnr,
p_buzei FOR bseg-buzei,
p_gjahr FOR bseg-gjahr,
p_budat for bkpf-budat.
SELECTION-SCREEN SKIP.
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN SKIP.
PARAMETERS: p_append AS CHECKBOX DEFAULT 'X'.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_records.
*& Form get_records
FORM get_records.
DATA: l_cursor TYPE cursor,
lt_bseg TYPE TABLE OF bseg,
ls_bseg LIKE LINE OF lt_bseg,
lt_output TYPE ty_tab_output,
ls_output LIKE LINE OF lt_output,
lt_nametab TYPE ty_tab_nametab,
ls_nametab LIKE LINE OF lt_nametab,
l_field(30) TYPE c,
l_output(50) TYPE c,
l_date(10) TYPE c,
l_len TYPE i.
FIELD-SYMBOLS: <field>.
IF p_append NE space.
OPEN DATASET p_file FOR APPENDING IN TEXT MODE.
ELSE.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE.
ENDIF.
Retrieve BSEF fieldnames and data types
PERFORM get_fields CHANGING lt_nametab.
OPEN CURSOR l_cursor FOR
SELECT * FROM bseg
WHERE bukrs IN p_bukrs
AND belnr IN p_belnr
AND buzei IN p_buzei
AND gjahr IN p_gjahr.
Write out fieldnames
IF p_append IS INITIAL.
LOOP AT lt_nametab INTO ls_nametab.
CONCATENATE ls_output ls_nametab-fieldname
INTO ls_output SEPARATED BY c_delimiter.
ENDLOOP.
IF ls_output+0(4) = c_delimiter.
SHIFT ls_output LEFT BY 4 PLACES.
ENDIF.
l_len = strlen( ls_output ).
TRANSFER ls_output TO p_file LENGTH l_len.
ENDIF.
Process BSEG records
DO.
CLEAR lt_bseg.
FETCH NEXT CURSOR l_cursor
INTO TABLE lt_bseg
PACKAGE SIZE c_records.
IF sy-subrc 0.
EXIT.
ENDIF.
LOOP AT lt_bseg INTO ls_bseg.
SELECT single * FROM BKPF
WHERE BUKRS = ls_bseg-BUKRS
AND BELNR = ls_bseg-BELNR
AND GJAHR = ls_bseg-GJAHR
AND BUDAT in p_budat.
if syst-subrc 0.
continue.
endif.
CLEAR ls_output.
Process individual fields of BSEG record
LOOP AT lt_nametab INTO ls_nametab.
CONCATENATE 'LS_BSEG-' ls_nametab-fieldname INTO l_field.
ASSIGN (l_field) TO <field>.
CLEAR l_output.
Process by field data types
CASE ls_nametab-exid.
WHEN 'C' OR 'N' OR 'I'.
Character, Numeric & Integer
l_output = <field>.
WHEN 'D'.
Dates
WRITE <field> TO l_date DD/MM/YYYY.
l_output = l_date.
WHEN 'P'.
Packed decimals
WRITE <field> TO l_output.
WHEN OTHERS.
MESSAGE a000(zs) WITH 'Data type error - ' ls_nametab-exid.
ENDCASE.
SHIFT l_output LEFT DELETING LEADING space.
CONCATENATE ls_output l_output
INTO ls_output SEPARATED BY c_delimiter.
ENDLOOP.
IF ls_output+0(4) = c_delimiter.
SHIFT ls_output LEFT BY 4 PLACES.
ENDIF.
l_len = strlen( ls_output ).
TRANSFER ls_output TO p_file LENGTH l_len.
ENDLOOP.
IF sy-subrc = 0.
ENDIF.
ENDDO.
CLOSE CURSOR l_cursor.
CLOSE DATASET p_file.
ENDFORM. " get_records
*& Form get_fields
FORM get_fields CHANGING pt_nametab TYPE ty_tab_nametab.
CALL FUNCTION 'RFC_GET_NAMETAB'
EXPORTING
tabname = 'BSEG'
TABLES
nametab = pt_nametab
EXCEPTIONS
table_not_active = 1
OTHERS = 2.
IF sy-subrc 0.
ENDIF.
ENDFORM. " get_fields
hope this helps.
cheers,
Hema.

GL display for inventory account which are not defined as line item display

Hi All,
We have inventory gl accounts which are auto post accounts , these accounts get posted when grn is done. these accounts are not defined as line item display accounts, but if we execute the T code: FS10 we get the gl balance display and not line item display.
Our requirement is that we should be able to view the line item display matching the GL account balance in that GL account.
Can we get the report in MM module line items wise display.
Regards
Prashant P. Zinge

Hello,
You should use RFSEPA01 program via execute SE38 transaction.
This program activate line item for each account. Activation means, this program generate line items to BSIS table. So that after this program running, you can see line items in FBL3N.
Regards,
Burak

User exit which gets triggered when a line item is deleted in va02

Hello all,
I am unable to find a User exit which gets trigerred when i delete a line item from va02.If I use the User Exits for saving data in Include MV45AFZZ the screen field VBAP-POSNR for line item is not getting accessed.All i need to compare the line item texts. Which means if any of these texts change then i need to write my logic. But the screen field name for all the texts is the same.Please guide me.

Hello,
Whever you perform any actions on the line item, we have the user exit in MV45AFZZ, userexitxvbap. Whenever the the item is deleted the UPDKZ value in XVBAP value is set to 'D', else since you are using the transaction VA02, any change is recorded in YVBAP(for old values) and XVBAP(for new values), so using this two internal table you can write any necessary logic.
BR
Sudhakar.

Problem in bdc for table control for line items

Hi experts,
I am runnig a bdc for ME52.
i am just entering PR number, in the second screen i have got all the line items. I need to select these line item 10 and double click or hit enter, it takes me to screen 3, there im just checking a checkbox and saving.
Again i need to select the line item 20 and double click or hit enter. again the same process.
Again repeat for all the line items.
But my problem is it is updating everytime for only line item 10. for line item 20 and others it say "no chnge in the data".
I am pasting my code here. please check and revert me back .plz.
DATA: w_output LIKE LINE OF i_output.
REFRESH I_ITAB[].
SELECT * FROM EBAN
           INTO TABLE i_itab
           WHERE banfn in s_banfn AND
                 bsart in s_bsart AND
                 bstyp in s_bstyp AND
                 matnr in s_matnr AND
                 werks in s_werks AND
                 lfdat in s_lfdat AND
                 pstyp in s_pstyp AND
                 knttp in s_knttp AND
                 estkz in s_estkz AND
                 loekz eq ' '.
IF sy-subrc = 0.
    CLEAR: w_itab,
             i_poitab[].
    SORT i_itab by banfn.
    LOOP AT i_itab INTO w_itab where menge GT eban-bsmng.
      IF p_close = 'X' AND p_rep = 'X'.
        IF w_itab-ebakz = 'X'.
          w_itab-ebakz = ' '.
          APPEND w_itab to i_poitab.
        ENDIF.
      ELSEIF p_open = 'X' AND p_rep = 'X'.
        IF w_itab-ebakz = ' '.
          w_itab-ebakz = 'X'.
          APPEND w_itab to i_poitab.
        ENDIF.
      ELSEIF p_close = 'X' AND p_repw = 'X'.
        IF w_itab-ebakz = ' '.
          APPEND w_itab to i_poitab.
        ENDIF.
      ELSEIF p_open = 'X' AND p_repw = 'X'.
        IF w_itab-ebakz = 'X'.
          APPEND w_itab to i_poitab.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
LOOP AT i_poitab into w_output.
    APPEND w_output to i_output.
   PERFORM CALL_BDC.
endloop.
IF p_rep = 'X'.
PERFORM CALL_BDC.
ENDIF.
ENDFORM.                    " GET_DATA
*&      Form CALL_BDC
      text
--> p1        text
<-- p2        text
FORM CALL_BDC.
DATA: seltab(5) TYPE N,
      seltab1(2) TYPE N,
      tempvar(30) TYPE N,
      cnt TYPE N.
LOOP AT i_output.
clear: seltab,
       seltab1.
seltab = i_output-bnfpo.
seltab1 = seltab+2(2).
perform bdc_dynpro      using 'SAPMM06B' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'EBAN-BANFN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'EBAN-BANFN'
                              i_output-banfn.
perform bdc_dynpro      using 'SAPMM06B' '0106'.
clear tempvar.
*cnt = 1.
concatenate 'EBAN-BNFPO(' seltab1 ')' into tempvar.
perform bdc_field       using 'BDC_CURSOR'
                             'EBAN-BNFPO(seltab1)'.
                                tempvar.
perform bdc_field       using 'BDC_OKCODE'
                              '=DETA'.
perform bdc_field       using 'RM06B-BNFPO'
                              i_output-bnfpo.
perform bdc_field       using 'RM06B-TCSELFLAG(seltab1)'
                             'X'.
perform bdc_dynpro      using 'SAPMM06B' '0102'.
perform bdc_field       using 'BDC_CURSOR'
                              'EBAN-EBAKZ'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'EBAN-EBAKZ'
                              i_output-ebakz.
CALL TRANSACTION 'ME52' USING bdc_data MODE 'A'
                               MESSAGES INTO i_bdcmsg.
    COMMIT WORK AND WAIT.
ENDLOOP.
ENDFORM.                    " CALL_BDC
*&      Form bdc_dynpro
      text
     -->P_0686   text
     -->P_0687   text
FORM bdc_dynpro USING    program dynpro.
CLEAR bdc_data.
bdc_data-program = program.
bdc_data-dynpro   = dynpro.
bdc_data-dynbegin = 'X'.
APPEND bdc_data.
CLEAR bdc_data.
ENDFORM.
thanks,
N

Looks like table control logic is wrong -- do compare with below program...
only table contril area
REPORT ZPadmam
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Thanks
Seshu

Contents of table BSIS-BUZID (line item ID)

Dear all,
What mean of T, W and blank in field BUZID (line item ID) from table BSIS.
Thanks very much.
Best Regards,
Koesdianto

Hi,
Use in invoice verification/inventory management
Buzid             Use
8                " Revaluation
A                " Asset
B                " Warehouse stock order
C                " Warehouse stock order assigned
K                " Vendor
F                " Delivery costs
G                " Assigned delivery costs
H                " Delivery costs - warehouse stock order
I                " Delivery costs - assigned warehouse stock order
L                " Warehouse order
M                " Material
N                " Assigned order
P                " Price difference
S                " General G/L account
T                " Tax
W                " GR/IR item
X                " Purchase order - assigned asset
Y                " Delivery costs - assigned asset
Z                " Cash discount clearing
Use in FI:
Special feature: Not just used to indicate G/L accounts; also used for special open items
BUZID         KOART               Use
A             D;K                Statistical offsetting posting (Sp.G/L)
P             D;K                Payment requests
U             S                  Valuation adjustments for reversal
R             D;K                Residual item transfer posting
E             D                  FSCM Biller Direct
D             S                  Bill of exchange discounting
S             D;K                Bill of exchange charges
W             S                  Bill of exchange tax
Regards,
Eli

Which all tables suffice all line item GL data requirements

Similar Messages

Maybe you are looking for